Surface brightness-colour relations (SBCRs) are used to derive the stellar angular diameters from photometric observations. They have various astrophysical applications, such as the distance determination of eclipsing binaries or the determination of exoplanet parameters. However, strong discrepancies between the SBCRs still exist in the literature, in particular for early and late-type stars. We aim to calibrate new SBCRs as a function of the spectral type and the luminosity class of the stars. Our goal is also to apply homogeneous criteria to the selection of the reference stars and in view of compiling an exhaustive and up-to-date list of interferometric late-type targets. We implemented criteria to select measurements in the JMMC Measured Diameters Catalog (JMDC). We then applied additional criteria on the photometric measurements used to build the SBCRs, together with stellar characteristics diagnostics. We built SBCRs for F5/K7-II/III, F5/K7-IV/V, M-II/III and M-V stars, with respective RMS of $\sigma_{F_{V}} = 0.0022$ mag, $\sigma_{F_{V}} = 0.0044$ mag, $\sigma_{F_{V}} = 0.0046$ mag, and $\sigma_{F_{V}} = 0.0038$ mag. This results in a precision on the angular diameter of 1.0\%, 2.0\%, 2.1\%, and 1.7\%, respectively. These relations cover a large $V-K$ colour range of magnitude, from 1 to 7.5. Our work demonstrates that SBCRs are significantly dependent on the spectral type and the luminosity class of the star. Through a new set of interferometric measurements, we demonstrate the critical importance of the selection criteria proposed for the calibration of SBCR. Finally, using the Gaia photometry for our samples, we obtained (G-K) SBCRs with a precision on the angular diameter between 1.1\% and 2.4\%.

The surface brightness - color relationship (SBCR) is a poweful tool for determining the angular diameter of stars from photometry. It was for instance used to derive the distance of eclipsing binaries in the Large Magellanic Cloud (LMC), which led to its distance determination with an accuracy of 1%. We calibrate the SBCR for red giant stars in the 2.1 < V-K < 2.5 color range using homogeneous VEGA/CHARA interferometric data secured in the visible domain, and compare it to the relation based on infrared interferometric observations, which were used to derive the distance to the LMC. Observations of eight G-K giants were obtained with the VEGA/CHARA instrument. The derived limb-darkened angular diameters were combined with a homogeneous set of infrared magnitudes in order to constrain the SBCR. The average precision we obtain on the limb-darkened angular diameters of the eight stars in our sample is 2.4%. For the four stars in common observed by both VEGA/CHARA and PIONIER/VLTI, we find a 1 sigma agreement for the angular diameters. The SBCR we obtain in the visible has a dispersion of 0.04 magnitude and is consistent with the one derived in the infrared (0.018 magnitude). The consistency of the infrared and visible angular diameters and SBCR reinforces the result of 1% precision and accuracy recently achieved on the distance of the LMC using the eclipsing-binary technique. It also indicates that it is possible to combine interferometric observations at different wavelengths when the SBCR is calibrated.

Context. Asymptotic giant branch stars are cool luminous evolved stars that are well observable across the Galaxy and populating Gaia data. They have complex stellar surface dynamics Aims. On the AGB star CL Lac, it has been shown that the convection-related variability accounts for a substantial part of the Gaia DR2 parallax error. We observed this star with the MIRC-X beam combiner installed at the CHARA interferometer to detect the presence of stellar surface inhomogeneities. Methods. We performed the reconstruction of aperture synthesis images from the interferometric observations at different wavelengths. Then, we used 3D radiative hydrodynamics simulations of stellar convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps in the spectral channels of MIRC-X observations. Then, we determined the stellar radius and compared the 3D synthetic maps to the reconstructed ones focusing on matching the intensity contrast, the morphology of stellar surface structures, and the photocentre position at two different spectral channels, 1.52 and 1.70 micron, simultaneously. Results. We measured the apparent diameter of CL Lac at two wavelengths and recovered the radius using a Gaia parallax. In addition to this, the reconstructed images are characterised by the presence of a brighter area that largely affects the position of the photocentre. The comparison with 3D simulation shows good agreement with the observations both in terms of contrast and surface structure morphology, meaning that our model is adequate for explaining the observed inhomogenities. Conclusions. This work confirms the presence of convection-related surface structures on an AGB star of Gaia DR2. Our result will help us to take a step forward in exploiting Gaia measurement uncertainties to extract the fundamental properties of AGB stars using appropriate RHD simulations.

The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of $R_{\star}=0.726\pm0.014 R_{\odot}$. We also derived the stellar density from the transits light curves ($\rho_{\star}=1.82\pm0.19 \rho_{\odot}$), which finally gives a direct estimate of the mass ($M_{\star}=0.696\pm0.078 M_{\odot}$) with a correlation of 0.46 between $R_{\star}$ and $M_{\star}$. This new mass is smaller than that derived from the C2kSMO stellar evolutionary model, which provides a mass range of 0.755$-$0.810 ($\pm 0.040$) $M_{\odot}$. This allows us to infer the mass, radius and density of the two transiting exoplanets of the system. We then use an inference model to obtain the internal parameters of these two transiting exoplanets. Moreover, we find that planet $b$ and $c$ have smaller radii than previously estimated ($1.500\pm0.057$ and $1.415\pm0.049 R_{\oplus}$, respectively); this clearly puts these planets out of the gap in the exoplanetary radii distribution and validates their super-Earth nature. Planet $b$ is more massive than planet $c$, but possibly less dense. We investigate whether this could be caused by partial melting of the mantle and find that tidal heating due to non-zero eccentricity of planet $b$ may be powerful enough. The system of HD219134 constitutes a very valuable benchmark for both stellar physics and exoplanetary science. The direct determination of the stellar density, radius and mass should be more extensively applied to provide accurate exoplanets properties and calibrate stellar models.

In this work we study in details the influence of pure astronomical refraction on solar metrologic measurements made from ground-based full disk imagery and provide the tools for correcting the measurements and estimating the associated uncertainties.For a given standard atmospheric model, we first use both analytical and numerical methods in order to test the validity of the commonly or historically used approximations of the differential effect of refraction as a function of zenith distance. For a given refraction model, we provide the exact formulae for correcting solar radius measurements at any heliographic angle and for any zenith distance. Then, using solar images recorded in the near infrared between 2011 and 2016, we show that these corrections can be applied up to $70\deg$ using the usual approximate formulae and can be extended up to $80\deg$ of zenith distance provided that a standard atmospheric model and a full numerical integration of the refraction integral are used. We also provide estimates of the absolute uncertainties associated with the differential refraction corrections and show that approximate formulae can be used up to $80\deg$ of zenith distance for computing these uncertainties. For a given instrumental setup and the knowledge of the uncertainties associated with local weather records, this can be used to fix the maximum zenith distance one can observe depending on the required astrometric accuracy.

Developed at the Observatoire de la C\^ote d'Azur (OCA) within the framework of the PICARD space mission (Thuillier et al., 2006) and with support from the french spatial agency (CNES), MISOLFA (Moniteur d'Images Solaires Franco-Alg\'erien) is a new generation of daytime turbulence monitor. Its objective is to measure both the spatial and temporal turbulence parameters in order to quantify their effects on the solar diameter measurements that will be made from ground using the qualification model of the SODISM (SOlar Diameter Imager and Surface Mapper) instrument onboard PICARD. The comparison of simultaneous images from ground and space should allow us, with the help of the solar monitor, to find the best procedure possible to measure solar diameter variations from ground on the long term. MISOLFA is now installed at the Calern facility of OCA and PICARD is scheduled to be launched in 2010. We present here the principles of the instrument and the first results obtained on the characteristics of the turbulence observed at Calern observatory using this monitor while waiting for the launch of the space mission.

The Solar Diameter Imager and Surface Mapper (SODISM) on board the PICARD space mission provides wide-field images of the photosphere and chromosphere of the Sun in five narrow pass bands (centered at 215.0, 393.37, 535.7, 607.1, and 782.2 nm). PICARD is a space mission, which was successfully launched on 15 June 2010 into a Sun synchronous dawn-dusk orbit. It represents a European asset aiming at collecting solar observations that can serve to estimate some of the inputs to Earth climate models. The scientific payload consists of the SODISM imager and of two radiometers, SOVAP (SOlar VAriability PICARD) and PREMOS (PREcision MOnitor Sensor), which carry out measurements that allow estimating the Total Solar Irradiance (TSI) and the Solar Spectral Irradiance (SSI) from the middle ultraviolet to the red. The SODISM telescope monitors solar activity continuously. It thus produces images that can also feed SSI reconstruction models. Further, the objectives of SODISM encompass the probing of the interior of the Sun via helioseismic analysis of observations in intensity (on the solar disc and at the limb), and via astrometric investigations at the limb. The latter addresses especially the spectral dependence of the radial limb shape, and the temporal evolution of the solar diameter and asphericity. After a brief review of its original science objectives, this paper presents the detailed design of the SODISM instrument, its expected performance, and the scheme of its flight operations. Some observations with SODISM are presented and discussed.