Normalized to: Moore, P.
[1]
oai:arXiv.org:1806.11308 [pdf] - 1716177
Characterisation and Testing of CHEC-M - a camera prototype for the
Small-Sized Telescopes of the Cherenkov Telescope Array
Zorn, J.;
White, R.;
Watson, J. J.;
Armstrong, T. P.;
Balzer, A.;
Barcelo, M.;
Berge, D.;
Bose, R.;
Brown, A. M.;
Bryan, M.;
Chadwick, P. M.;
Clark, P.;
Costantini, H.;
Cotter, G.;
Dangeon, L.;
Daniel, M.;
De Franco, A.;
Deiml, P.;
Fasola, G.;
Funk, S.;
Gebyehu, M.;
Gironnet, J.;
Graham, J. A.;
Greenshaw, T.;
Hinton, J. A.;
Kraus, M.;
Lapington, J. S.;
Laporte, P.;
Leach, S. A.;
Blanc, O. Le;
Malouf, A.;
Molyneux, P.;
Moore, P.;
Prokoph, H.;
Okumura, A.;
Ross, D.;
Rowell, G.;
Sapozhnikov, L.;
Schoorlemmer, H.;
Sol, H.;
Stephan, M.;
Tajima, H.;
Tibaldo, L.;
Varner, G.;
Zink, A.
Submitted: 2018-06-29, last modified: 2018-07-16
The Compact High Energy Camera (CHEC) is a camera design for the Small-Sized
Telescopes (SSTs; 4 m diameter mirror) of the Cherenkov Telescope Array (CTA).
The SSTs are focused on very-high-energy $\gamma$-ray detection via atmospheric
Cherenkov light detection over a very large area. This implies many individual
units and hence cost-effective implementation. CHEC relies on dual-mirror
optics to reduce the plate-scale and make use of 6 $\times$ 6 mm$^2$ pixels,
leading to a low-cost ($\sim$150 kEuro), compact (0.5 m $\times$ 0.5 m), and
light ($\sim$45 kg) camera with 2048 pixels providing a camera FoV of $\sim$9
degrees. The electronics are based on custom TARGET (TeV array readout with
GSa/s sampling and event trigger) ASICs and FPGAs sampling incoming signals at
a gigasample per second, with flexible camera-level triggering within a single
backplane FPGA. CHEC is designed to observe in the $\gamma$-ray energy range of
1$-$300 TeV, and at impact distances up to $\sim$500 m. To accommodate this and
provide full flexibility for later data analysis, full waveforms with 96
samples for all 2048 pixels can be read out at rates up to $\sim$900 Hz. The
first prototype, CHEC-M, based on multi-anode photomultipliers (MAPMs) as
photosensors, was commissioned and characterised in the laboratory and during
two measurement campaigns on a telescope structure at the Paris Observatory in
Meudon. In this paper, the results and conclusions from the laboratory and
on-site testing of CHEC-M are presented. They have provided essential input on
the system design and on operational and data analysis procedures for a camera
of this type. A second full-camera prototype based on Silicon photomultipliers
(SiPMs), addressing the drawbacks of CHEC-M identified during the first
prototype phase, has already been built and is currently being commissioned and
tested in the laboratory.
[5]
oai:arXiv.org:1509.01480 [pdf] - 1271733
The first GCT camera for the Cherenkov Telescope Array
De Franco, A.;
White, R.;
Allan, D.;
Armstrong, T.;
Ashton, T.;
Balzer, A.;
Berge, D.;
Bose, R.;
Brown, A. M.;
Buckley, J.;
Chadwick, P. M.;
Cooke, P.;
Cotter, G.;
Daniel, M. K.;
Funk, S.;
Greenshaw, T.;
Hinton, J.;
Kraus, M.;
Lapington, J.;
Molyneux, P.;
Moore, P.;
Nolan, S.;
Okumura, A.;
Ross, D.;
Rulten, C.;
Schmoll, J.;
Schoorlemmer, H.;
Stephan, M.;
Sutcliffe, P.;
Tajima, H.;
Thornhill, J.;
Tibaldo, L.;
Varner, G.;
Watson, J.;
Zink, A.
Submitted: 2015-09-04
The Gamma Cherenkov Telescope (GCT) is proposed to be part of the Small Size
Telescope (SST) array of the Cherenkov Telescope Array (CTA). The GCT
dual-mirror optical design allows the use of a compact camera of diameter
roughly 0.4 m. The curved focal plane is equipped with 2048 pixels of
~0.2{\deg} angular size, resulting in a field of view of ~9{\deg}. The GCT
camera is designed to record the flashes of Cherenkov light from
electromagnetic cascades, which last only a few tens of nanoseconds. Modules
based on custom ASICs provide the required fast electronics, facilitating
sampling and digitisation as well as first level of triggering. The first GCT
camera prototype is currently being commissioned in the UK. On-telescope tests
are planned later this year. Here we give a detailed description of the camera
prototype and present recent progress with testing and commissioning.
[6]
oai:arXiv.org:1309.3971 [pdf] - 1179244
CHIRON - A Fiber Fed Spectrometer for Precise Radial Velocities
Submitted: 2013-09-16
The CHIRON optical high-resolution echelle spectrometer was commissioned at
the 1.5m telescope at CTIO in 2011. The instrument was designed for high
throughput and stability, with the goal of monitoring radial velocities of
bright stars with high precision and high cadence for the discovery of low-mass
exoplanets. Spectral resolution of R=79,000 is attained when using a slicer
with a total (including telescope and detector) efficiency of 6% or higher,
while a resolution of R=136,000 is available for bright stars. A fixed spectral
range of 415 to 880 nm is covered. The echelle grating is housed in a vacuum
enclosure and the instrument temperature is stabilized to +-0.2deg. Stable
illumination is provided by an octagonal multimode fiber with excellent
light-scrambling properties. An iodine cell is used for wavelength calibration.
We describe the main optics, fiber feed, detector, exposure-meter, and other
aspects of the instrument, as well as the observing procedure and data
reduction.
[8]
oai:arXiv.org:1307.4962 [pdf] - 1943149
The dual-mirror Small Size Telescope for the Cherenkov Telescope Array
Pareschi, G.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.;
Amans, J. P.;
Boisson, C.;
Costille, C.;
Dournaux, J. L.;
Dumas, D.;
Fasola, G.;
Hervet, O.;
Huet, J. M.;
Laporte, P.;
Rulten, C.;
Sol, H.;
Zech, A.;
White, R.;
Hinton, J.;
Ross, D.;
Sykes, J.;
Ohm, S.;
Schmoll, J.;
Chadwick, P.;
Greenshaw, T.;
Daniel, M.;
Cotter, G.;
Varner, G. S.;
Funk, S.;
Vandenbroucke, J.;
Sapozhnikov, L.;
Buckley, J.;
Moore, P.;
Williams, D.;
Markoff, S.;
Vink, J.;
Berge, D.;
Hidaka, N.;
Okumura, A.;
Tajima, H.
Submitted: 2013-07-18
In this paper, the development of the dual mirror Small Size Telescopes (SST)
for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a
primary mirror diameter of 4 m, will be produced and installed at the CTA
southern site. These will allow investigation of the gamma-ray sky at the
highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV.
The telescope presented in this contribution is characterized by two major
innovations: the use of a dual mirror Schwarzschild-Couder configuration and of
an innovative camera using as sensors either multi-anode photomultipliers
(MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the
telescope, achieved with the dual-mirror optics, allows the camera to be
compact (40 cm in diameter), and low-cost. The camera, which has about 2000
pixels of size 6x6 mm^2, covers a field of view of 10{\deg}. The dual mirror
telescopes and their cameras are being developed by three consortia, ASTRI
(Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE
(Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High
Energy Camera, universities in UK, US and Japan) which are merging their
efforts in order to finalize an end-to-end design that will be constructed for
CTA. A number of prototype structures and cameras are being developed in order
to investigate various alternative designs. In this contribution, these designs
are presented, along with the technological solutions under study.
[9]
oai:arXiv.org:1307.2807 [pdf] - 1937862
A Compact High Energy Camera for the Cherenkov Telescope Array
Daniel, M. K.;
White, R. J.;
Berge, D.;
Buckley, J.;
Chadwick, P. M.;
Cotter, G.;
Funk, S.;
Greenshaw, T.;
Hidaka, N.;
Hinton, J.;
Lapington, J.;
Markoff, S.;
Moore, P.;
Nolan, S.;
Ohm, S.;
Okumura, A.;
Ross, D.;
Sapozhnikov, L.;
Schmoll, J.;
Sutcliffe, P.;
Sykes, J.;
Tajima, H.;
Varner, G. S.;
Vandenbroucke, J.;
Vink, J.;
Williams, D.
Submitted: 2013-07-10
The Compact High Energy Camera (CHEC) is a camera-development project
involving UK, US, Japanese and Dutch institutes for the dual-mirror Small-Sized
Telescopes (SST-2M) of the Cherenkov Telescope Array (CTA). Two CHEC
prototypes, based on different photosensors are funded and will be assembled
and tested in the UK over the next ~18 months. CHEC is designed to record
flashes of Cherenkov light lasting from a few to a hundred nanoseconds, with
typical RMS image width and length of ~0.2 x 1.0 degrees, and has a 9 degree
field of view. The physical camera geometry is dictated by the telescope
optics: a curved focal surface with radius of curvature 1m and diameter ~35cm
is required. CHEC is designed to work with both the ASTRI and GATE SST-2M
telescope structures and will include an internal LED flasher system for
calibration. The first CHEC prototype will be based on multi-anode
photomultipliers (MAPMs) and the second on silicon photomultipliers (SiPMs or
MPPCs). The first prototype will soon be installed on the ASTRI SST-2M
prototype structure on Mt. Etna.