Normalized to: Moch, D.
[1]
oai:arXiv.org:1209.2624 [pdf] - 1151355
GRAVITY: metrology
Gillessen, S.;
Lippa, M.;
Eisenhauer, F.;
Pfuhl, O.;
Haug, M.;
Kellner, S.;
Ott, T.;
Wieprecht, E.;
Sturm, E.;
Haussmann, F.;
Kister, C. F.;
Moch, D.;
Thiel, M.
Submitted: 2012-09-12
GRAVITY is a second generation VLTI instrument, combining the light of four
telescopes and two objects simultaneously. The main goal is to obtain
astrometrically accurate information. Besides correctly measured stellar phases
this requires the knowledge of the instrumental differential phase, which has
to be measured optically during the astronomical observations. This is the
purpose of a dedicated metrology system. The GRAVITY metrology covers the full
optical path, from the beam combiners up to the reference points in the beam of
the primary telescope mirror, minimizing the systematic uncertainties and
providing a proper baseline in astrometric terms. Two laser beams with a fixed
phase relation travel backward the whole optical chain, creating a fringe
pattern in any plane close to a pupil. By temporal encoding the phase
information can be extracted at any point by means of flux measurements with
photo diodes. The reference points chosen sample the pupil at typical radii,
eliminating potential systematics due differential focus. We present the final
design and the performance estimate, which is in accordance with the overall
requirements for GRAVITY.
[2]
oai:arXiv.org:1007.1765 [pdf] - 1033617
The Fringe Detection Laser Metrology for the GRAVITY Interferometer at
the VLTI
Bartko, H.;
Gillessen, S.;
Rabien, S.;
Thiel, M.;
Gräter, A.;
Haug, M.;
Kellner, S.;
Eisenhauer, F.;
Lacour, S.;
Straubmeier, C.;
Berger, J. -P.;
Jocou, L.;
Chibani, W.;
Lüst, S.;
Moch, D.;
Pfuhl, O.;
Fabian, W.;
Araujo-Hauck, C.;
Perraut, K.;
Brandner, W.;
Perrin, G.;
Amorim, A.
Submitted: 2010-07-11
Interferometric measurements of optical path length differences of stars over
large baselines can deliver extremely accurate astrometric data. The
interferometer GRAVITY will simultaneously measure two objects in the field of
view of the Very Large Telescope Interferometer (VLTI) of the European Southern
Observatory (ESO) and determine their angular separation to a precision of 10
micro arcseconds in only 5 minutes. To perform the astrometric measurement with
such a high accuracy, the differential path length through the VLTI and the
instrument has to be measured (and tracked since Earth's rotation will
permanently change it) by a laser metrology to an even higher level of accuracy
(corresponding to 1 nm in 3 minutes). Usually, heterodyne differential path
techniques are used for nanometer precision measurements, but with these
methods it is difficult to track the full beam size and to follow the light
path up to the primary mirror of the telescope. Here, we present the
preliminary design of a differential path metrology system, developed within
the GRAVITY project. It measures the instrumental differential path over the
full pupil size and up to the entrance pupil location. The differential phase
is measured by detecting the laser fringe pattern both on the telescopes'
secondary mirrors as well as after reflection at the primary mirror. Based on
our proposed design we evaluate the phase measurement accuracy based on a full
budget of possible statistical and systematic errors. We show that this
metrology design fulfills the high precision requirement of GRAVITY.
[3]
oai:arXiv.org:1007.1612 [pdf] - 1033604
GRAVITY: a four-telescope beam combiner instrument for the VLTI
Gillessen, S.;
Eisenhauer, F.;
Perrin, G.;
Brandner, W.;
Straubmeier, C.;
Perraut, K.;
Amorim, A.;
Schöller, M.;
Araujo-Hauck, C.;
Bartko, H.;
Baumeister, H.;
Berger, J. -P.;
Carvas, P.;
Cassaing, F.;
Chapron, F.;
Choquet, E.;
Clenet, Y.;
Collin, C.;
Eckart, A.;
Fedou, P.;
Fischer, S.;
Gendron, E.;
Genzel, R.;
Gitton, P.;
Gonte, F.;
Gräter, A.;
Haguenauer, P.;
Haug, M.;
Haubois, X.;
Henning, T.;
Hippler, S.;
Hofmann, R.;
Jocou, L.;
Kellner, S.;
Kervella, P.;
Klein, R.;
Kudryavtseva, N.;
Lacour, S.;
Lapeyrere, V.;
Laun, W.;
Lena, P.;
Lenzen, R.;
Lima, J.;
Moch, D.;
Moratschke, D.;
Moulin, T.;
Naranjo, V.;
Neumann, U.;
Nolot, A.;
Paumard, T.;
Pfuhl, O.;
Rabien, S.;
Ramos, J.;
Rees, J. M.;
Rohloff, R. -R.;
Rouan, D.;
Rousset, G.;
Sevin, A.;
Thiel, M.;
Wagner, K.;
Wiest, M.;
Yazici, S.;
Ziegler, D.
Submitted: 2010-07-09
GRAVITY is an adaptive optics assisted Beam Combiner for the second
generation VLTI instrumentation. The instrument will provide high-precision
narrow-angle astrometry and phase-referenced interferometric imaging in the
astronomical K-band for faint objects. We describe the wide range of science
that will be tackled with this instrument, highlighting the unique capabilities
of the VLTI in combination with GRAVITY. The most prominent goal is to observe
highly relativistic motions of matter close to the event horizon of Sgr A*, the
massive black hole at center of the Milky Way. We present the preliminary
design that fulfils the requirements that follow from the key science drivers:
It includes an integrated optics, 4-telescope, dual feed beam combiner operated
in a cryogenic vessel; near-infrared wavefrontsensing adaptive optics;
fringe-tracking on secondary sources within the field of view of the VLTI and a
novel metrology concept. Simulations show that 10 {\mu}as astrometry within few
minutes is feasible for a source with a magnitude of mK = 15 like Sgr A*, given
the availability of suitable phase reference sources (mK = 10). Using the same
setup, imaging of mK = 18 stellar sources in the interferometric field of view
is possible, assuming a full night of observations and the corresponding UV
coverage of the VLTI.