Normalized to: Mladenov, T.
[1]
oai:arXiv.org:1911.08325 [pdf] - 2000368
Fiber modal noise mitigation by a rotating double scrambler
Submitted: 2019-11-16
Fiber modal noise is a performance limiting factor in high-precision radial
velocity measurements with multi-mode fiber-fed high-resolution spectrographs.
Traditionally, modal noise is mitigated by agitating the fiber, this way
redistributing the light that propagates in the fiber over many different
modes. However, in case of fibers with only a limited number of modes, e.g. at
near-infrared wavelengths or in adaptive-optics assisted systems, this method
becomes very inefficient. The strong agitation that would be needed stresses
the fiber and can lead to focal ratio degradation. As an alternative approach,
we propose to use a classic optical double scrambler and to rotate the
scrambler's first fiber end during each exposure. Because of the rotating
illumination pattern of the scrambler's second fiber, the modes that are
excited vary continuously. This leads to very efficient averaging of the modal
pattern at the fiber exit and to a strong reduction of modal noise. In this
contribution, we present a prototype design and first laboratory results of the
rotating double scrambler.
[2]
oai:arXiv.org:1805.11848 [pdf] - 1707112
CUBESPEC: Low-cost space-based astronomical spectroscopy
Raskin, Gert;
Delabie, Tjorven;
De Munter, Wim;
Sana, Hugues;
Vandenbussche, Bart;
Vandoren, Bram;
Antoci, Victoria;
Kjeldsen, Hans;
Karoff, Christoffer;
de Koter, Alex;
Désert, Jean-Michel;
Mladenov, Tom;
Vandepitte, Dirk
Submitted: 2018-05-30, last modified: 2018-06-28
CubeSats are routinely used for low-cost photometry from space. Space-borne
spectroscopy, however, is still the exclusive domain of much larger platforms.
Key astrophysical questions in e.g. stellar physics and exoplanet research
require uninterrupted spectral monitoring from space over weeks or months. Such
monitoring of individual sources is unfortunately not affordable with these
large platforms. With CUBESPEC we plan to offer the astronomical community a
low-cost CubeSat solution for near-UV/optical/near-IR spectroscopy that enables
this type of observations. CUBESPEC is a generic spectrograph that can be
configured with minimal hardware changes to deliver both low resolution (R=100)
with very large spectral coverage (200-1000nm), as well as high resolution
(R=30,000) over a selected wavelength range. It is built around an off-axis
Cassegrain telescope and a slit spectrograph with configurable dispersion
elements. CUBESPEC will use a compact attitude determination and control system
for coarse pointing of the entire spacecraft, supplemented with a fine-guidance
system using a fast steering mirror to center the source on the spectrograph
slit and to cancel out satellite jitter. An extremely compact optical design
allows us to house this instrument in a 6U CubeSat with a volume of only
10x20x30cm$^{3}$, while preserving a maximized entrance pupil of ca.
9x19cm$^{2}$. In this contribution, we give an overview of the CUBESPEC
project, discuss its most relevant science cases, and present the design of the
instrument.