Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratings, the precision of a nonparallel groove layout is limited by the cubic structure of the silicon crystal. This motivates the pursuit of alternative techniques to grating manufacture, namely thermally activated selective topography equilibration (TASTE), which uses gray-scale electron-beam lithography to pattern multilevel structures in resist followed by an optimized polymer thermal reflow to smooth the 3D patterns into continuous surface relief profiles. Using TASTE, a mold for a reflection grating with a periodicity of 400 nm and grooves resembling an asymmetric sawtooth was patterned in 130 nm thick poly(methyl methacrylate) resist on a silicon substrate over a 50 mm by 7.5 mm area. This structure was coated with 15 nm of gold by electron-beam physical vapor deposition using titanium as an adhesion layer and then tested for EUV and SXR diffraction efficiency at beamline 6.3.2 of the Advanced Light Source synchrotron facility. Results demonstrate a quasi-blaze response characteristic of a 27 degree blaze angle with groove facets smooth to 1.5 nm rms. Absolute peak-order efficiency ranges from 75% to 25%, while total relative efficiency measures gap90% across the measured bandpass of 15.5 nm > lambda > 1.55 nm.

HaloSat is a small satellite (CubeSat) designed to map soft X-ray oxygen line emission across the sky in order to constrain the mass and spatial distribution of hot gas in the Milky Way. The goal of HaloSat is to help determine if hot gas gravitationally bound to individual galaxies makes a significant contribution to the cosmological baryon budget. HaloSat was deployed from the International Space Station in July 2018 and began routine science operations in October 2018. We describe the goals and design of the mission, the on-orbit performance of the science instrument, and initial observations.

Single-year spikes in radiocarbon production are caused by intense bursts of radiation from space. Supernovae emit both high-energy particle and electromagnetic radiation, but it is the latter that is most likely to strike the atmosphere all at once and cause a surge in 14C production. In the 1990s, it was claimed that the supernova in 1006 CE produced exactly this effect. With the 14C spikes in the years 775 and 994 CE now attributed to extreme solar events, attention has returned to the question of whether historical supernovae are indeed detectable using annual 14C measurements. Here, we combine new and existing measurements over six documented and putative supernovae, and conclude that no such astrophysical event has yet left a distinct imprint on the past atmospheric 14C record.

Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be used to achieve excellent throughput into orders achieving high resolutions. We have fabricated two off-plane gratings with blazed groove profiles via a technique which uses commonly available microfabrication processes, is easily scaled for mass production, and yields gratings customized for a given mission architecture. Both fabricated gratings were tested in the Littrow mounting at the Max-Planck-Institute for extraterrestrial Physics PANTER X-ray test facility to assess their performance. The line spread functions of diffracted orders were measured, and a maximum resolution of 800 $\pm$ 20 is reported. In addition, we also observe evidence of a `blaze' effect from measurements of relative efficiencies of the diffracted orders.

An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane gratings were actively aligned to each other and with a SPO to produce an overlapped spectrum. The gratings were aligned using an active alignment module which allows for the independent manipulation of subsequent gratings to a reference grating in three degrees of freedom using picomotor actuators which are controllable external to the test chamber. We report the line spread functions of the spectrograph and the actively aligned gratings, and plans for future development.