TeamIndus' lunar logistics vision includes multiple lunar missions to meet requirements of science, commercial and efforts towards global exploration. The first mission is slated for launch in 2020. The prime objective is to demonstrate autonomous precision lunar landing, and Surface Exploration Rover to collect data on the vicinity of the landing site. TeamIndus has developed various technologies towards lowering the access barrier to the lunar surface. This paper shall provide an overview of design of lander GNC system. The design of the GNC system has been described after concluding studies on sensor and actuator configurations. Frugal design approach is followed in the selection of GNC hardware. The paper describes the constraints for the orbital maneuvers and the lunar descent strategy. Various aspects of the GNC design of autonomous lunar descent maneuver: timeline of events, guidance, inertial and optical terrain-relative navigation schemes are described. The GNC software description focuses on system architecture, modes of operation, and core elements of the GNC software. The GNC algorithms have been tested using Monte-Carlo simulations and Processor-in-Loop runs. The paper concludes with a summary of key risk-mitigation studies for soft landing.

A comparative study on some representative parametrizations for the total and elastic cross-sections as a function of energy is presented. The dataset comprises pp and \bar{p}p scattering in the c.m energy interval 5 GeV-8 TeV. The parametrization for the total cross-section at low and intermediate energies follows the usual reggeonic structure (non-degenerate trajectories). For the leading high-energy pomeron contribution, we consider three distinct analytic parametrizations: either a power (P) law, or a log-squared (L2) law or a log-raised-to-gamma (Lgamma) law, where the exponent gamma is treated as a real free fit parameter. The parametrizations are also extended to fit the elastic (integrated) cross-section data in the same energy interval. Our main conclusions are the following: the data reductions with the logarithmic laws show strong dependence on the unknown energy scale involved, which is treated here either as a free parameter or fixed at the energy threshold; the fit results with the P law, the L2 law (free scale) and the Lgamma law (fixed scale and exponent gamma above 2) are all consistent within their uncertainties and with the experimental data up to 7 TeV, but they partially underestimate the high-precision TOTEM measurement at 8 TeV; once compared with these results, the L2 law with fixed scale is less consistent with the data and, in the case of a free scale, this pomeron contribution decreases as the energy increases below the scale factor (which lies above the energy cutoff); in all cases investigated, the predictions for the asymptotic ratio between the elastic and total cross-sections, within the uncertainties, do not exceed the value 0.430 (therefore, below the black-disc limit) and the results favor rational limits between 1/3 and 2/5. We are led to conclude that the rise of the hadronic cross-sections at the highest energies still constitutes an open problem.

A forward amplitude analysis on $pp$ and $\bar{p}p$ elastic scattering above 5 GeV is presented. The dataset includes the recent high-precision TOTEM measurements of the $pp$ total and elastic (integrated) cross-sections at 7 TeV and 8 TeV. Following previous works, the leading high-energy contribution for the total cross-section ($\sigma_{tot}$) is parametrized as $\ln^{\gamma}(s/s_h)$, where $\gamma$ and $s_h$ are free \textit{real} fit parameters. Singly-subtracted derivative dispersion relations are used to connect $\sigma_{tot}$ and the rho parameter ($\rho$) in an analytical way. Different fit procedures are considered, including individual fits to $\sigma_{tot}$ data, global fits to $\sigma_{tot}$ and $\rho$ data, constrained and unconstrained data reductions. The results favor a rise of the $\sigma_{tot}$ faster than the log-squared bound by Froissart and Martin at the LHC energy region. The parametrization for $\sigma_{tot}$ is extended to fit the elastic cross-section ($\sigma_{el}$) data with satisfactory results. The analysis indicates an asymptotic ratio $\sigma_{el}/\sigma_{tot}$ consistent with 1/3 (as already obtained in a previous work). A critical discussion on the correlation, practical role and physical implications of the parameters $\gamma$ and $s_h$ is presented. The discussion confronts the 2002 prediction of $\sigma_{tot}$ by the COMPETE Collaboration and the recent result by the Particle Data Group (2012 edition of the Review of Particle Physics). Some conjectures on possible implications of a fast rise of the proton-proton total cross-section at the highest energies are also presented.

An almost model-independent parametrization for the ratio of the total cross section to the elastic slope, as function of the center of mass energy, is introduced. The analytical result is based on the approximate relation of this quantity with the ratio $R$ of the elastic to total cross section and empirical fits to the $R$ data from proton-proton scattering above 10 GeV, under the conditions of asymptotic unitarity and the black-disk limit. This parametrization may be useful in studies of extensive air showers and the determination of the proton-proton total cross section from proton-air production cross section in cosmic-ray experiments.