Stellar occultations by asteroids and outer solar system bodies can offer ground based observers with modest telescopes and camera equipment the opportunity to probe the shape, size, atmosphere and attendant moons or rings of these distant objects. The essential requirements of the camera and recording equipment are: good quantum efficiency and low noise, minimal dead time between images, good horological faithfulness of the image time stamps, robustness of the recording to unexpected failure, and low cost. We describe the Astronomical Digital Video occultation observing and recording System (ADVS) which attempts to fulfil these requirements and compare the system with other reported camera and recorder systems. Five systems have been built, deployed and tested over the past three years, and we report on three representative occultation observations: one being a 9 +/-1.5 second occultation of the trans-Neptunian object 28978 Ixion (mv=15.2) at 3 seconds per frame, one being a 1.51 +/-0.017 second occultation of Deimos, the 12~km diameter satellite of Mars, at 30 frames per second, and one being a 11.04 +/-0.4 second occultation, recorded at 7.5 frames per second, of the main belt asteroid, 361 Havnia, representing a low magnitude drop (Dmv = 0.4) occultation.

We describe an image timestamp verification system to determine the exposure timing characteristics and continuity of images made by an imaging camera and recorder, with reference to Coordinated Universal Time (UTC). The original use was to verify the timestamps of stellar occultation recording systems, but the system is applicable to lunar flashes, planetary transits, sprite recording, or any area where reliable timestamps are required. The system offers good temporal resolution (down to 2 msec, referred to UTC) and provides exposure duration and interframe dead time information. The system uses inexpensive, off-the- shelf components, requires minimal assembly and requires no high-voltage components or connections. We also describe an application to load FITS (and other format) image files, which can decode the verification image timestamp. Source code, wiring diagrams and built applications are provided to aid the construction and use of the device.