Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratings, the precision of a nonparallel groove layout is limited by the cubic structure of the silicon crystal. This motivates the pursuit of alternative techniques to grating manufacture, namely thermally activated selective topography equilibration (TASTE), which uses gray-scale electron-beam lithography to pattern multilevel structures in resist followed by an optimized polymer thermal reflow to smooth the 3D patterns into continuous surface relief profiles. Using TASTE, a mold for a reflection grating with a periodicity of 400 nm and grooves resembling an asymmetric sawtooth was patterned in 130 nm thick poly(methyl methacrylate) resist on a silicon substrate over a 50 mm by 7.5 mm area. This structure was coated with 15 nm of gold by electron-beam physical vapor deposition using titanium as an adhesion layer and then tested for EUV and SXR diffraction efficiency at beamline 6.3.2 of the Advanced Light Source synchrotron facility. Results demonstrate a quasi-blaze response characteristic of a 27 degree blaze angle with groove facets smooth to 1.5 nm rms. Absolute peak-order efficiency ranges from 75% to 25%, while total relative efficiency measures gap90% across the measured bandpass of 15.5 nm > lambda > 1.55 nm.

Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be used to achieve excellent throughput into orders achieving high resolutions. We have fabricated two off-plane gratings with blazed groove profiles via a technique which uses commonly available microfabrication processes, is easily scaled for mass production, and yields gratings customized for a given mission architecture. Both fabricated gratings were tested in the Littrow mounting at the Max-Planck-Institute for extraterrestrial Physics PANTER X-ray test facility to assess their performance. The line spread functions of diffracted orders were measured, and a maximum resolution of 800 $\pm$ 20 is reported. In addition, we also observe evidence of a `blaze' effect from measurements of relative efficiencies of the diffracted orders.

An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane gratings were actively aligned to each other and with a SPO to produce an overlapped spectrum. The gratings were aligned using an active alignment module which allows for the independent manipulation of subsequent gratings to a reference grating in three degrees of freedom using picomotor actuators which are controllable external to the test chamber. We report the line spread functions of the spectrograph and the actively aligned gratings, and plans for future development.

We present new Australia Telescope Compact Array (ATCA) radio-continuum and XMM-Newton/Chandra X-ray Observatory (CXO) observations of the unusual supernova remnant HFPK 334 in the Small Magellanic Cloud (SMC). The remnant follows a shell type morphology in the radio-continuum and has a size of $\sim$20~pc at the SMC distance. The X-ray morphology is similar, however, we detect a prominent point source close to the center of the SNR exhibiting a spectrum with a best fit powerlaw with a photon index of $\Gamma = 2.7 \pm 0.5$. This central point source is most likely a background object and cannot be directly associated with the remnant. The high temperature, nonequilibrium conditions in the diffuse region suggest that this gas has been recently shocked and point toward a younger SNR with an age of $\lesssim 1800$ years. With an average radio spectral index of $\alpha=-0.59\pm0.09$ we find that an equipartition magnetic field for the remnant is $\sim$90~$\mu$G, a value typical of younger SNRs in low-density environments. Also, we report detection of scattered radio polarisation across the remnant at 20~cm, with a peak fractional polarisation level of 25$\pm$5\%.

We present a study of the plerionic supernova remnant 0540-69.3 in the LMC in X-ray, radio, optical, and infrared. We find that the shell of 0540-69.3 is characterized in the X-ray by thermal nonequilibrium plasma with depleted Mg and Si abundances and a temperature of kT ~ 0.7 keV. This thermal emission is superimposed with synchrotron emission in several regions. Based on X-ray spectra and on morphological considerations in all surveyed wavebands, we conclude that the shell is expanding into a clumpy and highly inhomogeneous medium. In one region of the shell we find an overabundance of Ne, suggesting the presence of ejecta near the edge of the remnant. We also see evidence for reheating of material via a reverse shock originating from the interaction of the supernova blast wave with a particularly dense cloud in the surrounding medium. Finally, we perform the first detailed study of the "halo" region extending 1.2-2.2 pc from the central pulsar. We detect the presence of thermal and nonthermal spectral components but do not find evidence for mixing or ejecta. We conclude that the thermal component is not a counterpart to similar optical and infrared halos and that it is most likely due to the projection of shell material along the line of sight.

Future NASA X-ray Observatories will shed light on a variety of high-energy astrophysical phenomena. Off-plane reflection gratings can be used to provide high throughput and spectral resolution in the 0.3--1.5 keV band, allowing for unprecedented diagnostics of energetic astrophysical processes. A grating spectrometer consists of multiple aligned gratings intersecting the converging beam of a Wolter-I telescope. Each grating will be aligned such that the diffracted spectra overlap at the focal plane. Misalignments will degrade both spectral resolution and effective area. In this paper we present an analytical formulation of alignment tolerances that define grating orientations in all six degrees of freedom. We verify our analytical results with raytrace simulations to fully explore the alignment parameter space. We also investigate the effect of misalignments on diffraction efficiency.

Future NASA X-ray spectroscopy missions will require high throughput, high resolution grating spectrometers. Off-plane reflection gratings are capable of meeting the performance requirements needed to realize the scientific goals of these missions. We have identified a novel grating fabrication method that utilizes common lithographic and microfabrication techniques to produce the high fidelity groove profile necessary to achieve this performance. Application of this process has produced an initial pre-master that exhibits a radial (variable line spacing along the groove dimension), high density (>6000 grooves/mm), laminar profile. This pre-master has been tested for diffraction efficiency at the BESSY II synchrotron light facility and diffracts up to 55% of incident light into usable spectral orders. Furthermore, tests of spectral resolving power show that these gratings are capable of obtaining resolutions well above 1300 ($\lambda/\Delta\lambda$) with limitations due to the test apparatus, not the gratings. Obtaining these results has provided confidence that this fabrication process is capable of producing off-plane reflection gratings for the next generation of X-ray observatories.

We present analysis of Chandra X-ray Observatory data detailing a galactic supernova remnant, G272.2-3.2. A clear shell of emission has been resolved for the first time as a series of filaments and knots around the entire rim of the remnant. Spectral analysis of these features show that they are consistent with shock heating of interstellar material in a clumpy medium. Spatially separated from this shell we see a central diffuse region dominated by harder, hotter emission. Spatial spectroscopy shows a clear enhancement of metals consistent with a Type Ia explosion, namely S, Si, and Fe. We find no clear evidence for a compact object or pulsar wind nebula and argue for a Type Ia origin. Consideration of the ionization timescales suggest an age of 8700 years for G272.2-3.2.

We present a comprehensive study of the X-ray emission from SNR 0453-68.5 in the Large Magellanic Cloud (LMC) as seen from the \textit{Chandra} X-ray Observatory. This object is in a class of composite remnants that exhibit a shell of emission surrounding a central plerion, more commonly known as a pulsar wind nebula (PWN). This is one of only five remnants in the LMC with an identified PWN. We find that the shell of emission is not ejecta dominated, but rather due to shocked ISM that has been swept up by the supernova blast wave or located in a precursor cavity wall. This is supported by the morphology of the local molecular cloud as seen with the \textit{Spitzer} Space Telescope. The spectral properties are consistent with a middle-aged remnant $>$17000 years old. A point source detected within the central knot is determined to be the pulsar powering the synchrotron emission of the PWN. Spectral fits show the nebula is well characterized by a power law with photon index $\Gamma=2.0$. This index is constant over a spatial scale of 0.4-1.2 pc, which is inconsistent with younger PWN containing remnants such as the Crab Nebula and SNR 0540-69.3. These fits also contain significant contributions from an ejecta dominated thermal plasma which we interpret as evidence of mixing during an evolved interaction of the PWN with the reverse shock of the SNR. We observe no evidence that the central pulsar contains a significant velocity transverse to the line of sight and argue that despite the asymmetric surface brightness distribution the SN explosion giving birth to this remnant may have been quite symmetric.

We present a suborbital rocket payload capable of performing soft X-ray spectroscopy on extended sources. The payload can reach resolutions of ~100(lambda/dlambda) over sources as large as 3.25 degrees in diameter in the 17-107 angstrom bandpass. This permits analysis of the overall energy balance of nearby supernova remnants and the detailed nature of the diffuse soft X-ray background. The main components of the instrument are: wire grid collimators, off-plane grating arrays and gaseous electron multiplier detectors. This payload is adaptable to longer duration orbital rockets given its comparatively simple pointing and telemetry requirements and an abundance of potential science targets.

The XA region of the Cygnus Loop is a bright knot of X-ray emission on the eastern edge of the supernova remnant resulting from the interaction of the supernova blast wave with density enhancements at the edge of a precursor formed cavity. To study the nature and origin of the X-ray emission we use high spatial resolution images from Chandra. Our goal is to probe the density of various spectral extraction regions to form a picture of the cavity wall and characterize the interaction between this supernova and the local interstellar medium. We find that a series of regions along the edge of the X-ray emission appears to trace out the location of the cavity wall. The best fit plasma models result in two temperature component equilibrium models for each region. The low temperature components have densities that are an order of magnitude higher than the high temperature components. The high density plasma may exist in the cavity wall where it equilibrates rapidly and cools efficiently. The low density plasma is interior to the enhancement and heated further by a reverse shock from the wall. Calculations of shock velocities and timescales since shock heating are consistent with this interpretation. Furthermore, we find a bright knot of emission indicative of a discrete interaction of the blast wave with a high density cloud in the cavity wall with a size scale ~0.1 pc. Aside from this, other extractions made interior to the X-ray edge are confused by line of sight projection of various components. Some of these regions show evidence of detecting the cavity wall but their location makes the interpretation difficult. In general, the softer plasmas are well fit at temperatures kT~0.11 keV, with harder plasmas at temperatures of kT~0.27 keV. All regions display consistent metal depletions most notably in N, O, and Ne at an average of 0.54, 0.55, and 0.36 times solar.

The Cygnus X-ray Emission Spectroscopic Survey (CyXESS) sounding rocket payload was launched from White Sands Missile Range on 2006 November 20 and obtained a high resolution spectrum of the Cygnus Loop supernova remnant in the soft X-rays. The novel X-ray spectrograph incorporated a wire-grid collimator feeding an array of gratings in the extreme off-plane mount which ultimately dispersed the spectrum onto Gaseous Electron Multiplier (GEM) detectors. This instrument recorded 65 seconds of usable data between 43-49.5 \AA in two prominent features. The first feature near 45 \AA is dominated by the He-like triplet of \ion{O}{7} in second order with contributions from \ion{Mg}{10} and \ion{Si}{9}-\ion{Si}{12} in first order, while the second feature near 47.5 \AA is first order \ion{S}{9} and \ion{S}{10}. Fits to the spectra give an equilibrium plasma at $\log(T)=6.2$ ($kT_e=0.14$ keV) and near cosmic abundances. This is consistent with previous observations, which demonstrated that the soft x-ray emission from the Cygnus Loop is dominated by interactions between the initial blast wave with the walls of a precursor formed cavity surrounding the Cygnus Loop and that this interaction can be described using equilibrium conditions.

The relationship between gas-rich galaxies and Ly-alpha absorbers is addressed in this paper in the context of the baryonic content of galaxy halos. Deep Arecibo HI observations are presented of two gas-rich spiral galaxies within 125 kpc projected distance of a Ly-alpha absorber at a similar velocity. The galaxies investigated are close to edge-on and the absorbers lie almost along their major axes, allowing for a comparison of the Ly-alpha absorber velocities with galactic rotation. This comparison is used to examine whether the absorbers are diffuse gas rotating with the galaxies' halos, outflow material from the galaxies, or intergalactic gas in the low redshift cosmic web. The results indicate that if the gas resides in the galaxies' halos it is not rotating with the system and possibly counter-rotating. In addition, simple geometry indicates the gas was not ejected from the galaxies and there are no gas-rich satellites detected down to 3.6 - 7.5 x 10^6 Msun, or remnants of satellites to 5-6 x 10^{18} cm^{-2}. The gas could potentially be infalling from large radii, but the velocities and distances are rather high compared to the high velocity clouds around the Milky Way. The most likely explanation is the galaxies and absorbers are not directly associated, despite the vicinity of the spiral galaxies to the absorbers (58-77 kpc from the HI edge). The spiral galaxies reside in a filament of intergalactic gas, and the gas detected by the absorber has not yet come into equilibrium with the galaxy. These results also indicate that the massive, extended dark matter halos of spiral galaxies do not commonly have an associated diffuse baryonic component at large radii.