We present a publicly-available toolkit of flight-proven hardware and software to retrieve 5 TB of data or small physical samples from a stratospheric balloon platform. Before launch, a capsule is attached to the balloon, and rises with it. Upon remote command, the capsule is released and descends via parachute, continuously transmitting its location. Software to predict the trajectory can be used to select a safe but accessible landing site. We dropped two such capsules from the SuperBIT telescope, in September 2019. The capsules took ~37 minutes to descend from ~30 km altitude. They drifted 32 km and 19 km horizontally, but landed within 300 m and 600 m of their predicted landing sites. We found them easily, and successfully recovered the data. We welcome interest from other balloon teams for whom the technology would be useful.

We present here the weak gravitational lensing detection of four nearby galaxy clusters in the southern sky: Abell 2029, Abell 85, Abell 1606 and Abell 2457. The weak lensing detections of Abell 1606 and Abell 2457 are the first in the literature. This work capitalizes on the wide field of view of the Dark Energy Camera at the Cerro Tololo Inter-American Observatory, which we use to obtain deep, multi-wavelength imaging of all targets. We publish maps of the clusters' projected mass distributions, and obtain the $M_{200}$ of their clusters through NFW profile fits to the two-dimensional tangential ellipticity signal.

We describe the first spectroscopic tomographic (spectrotomographic) weak lensing measurement for a galaxy cluster based only on background galaxies with spectroscopically determined redshifts. We use the massive cluster A2029 to demonstrate the power of combining spectroscopy and lensing to obtain accurate masses and to overcome biases from contamination and photometric redshift errors. We detect the shear signal from the cluster at $>3.9 \sigma$. The shear signal scales with source redshift in a way that is consistent with the angular diameter distance ratio variation in a $\Lambda$CDM Universe. Furthermore, the amplitude of the measured signal is consistent with the X-ray mass. Upcoming spectroscopic instruments such as the Prime Focus Spectrograph on Subaru will permit spectrotomographic weak lensing measurements with S/N comparable to current photometric-redshift-based weak lensing measurements for hundreds of galaxy clusters. Thus, spectrotomography may enable sensitive cosmological constraints that complement and are independent of other measurement techniques.

At a fraction the total cost of an equivalent orbital mission, scientific balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer attractive, competitive, and effective observational capabilities -- namely space-like resolution, transmission, and backgrounds -- that are well suited for modern astronomy and cosmology. SuperBIT is a diffraction-limited, wide-field, 0.5 m telescope capable of exploiting these observing conditions in order to provide exquisite imaging throughout the near-IR to near-UV. It utilizes a robust active stabilization system that has consistently demonstrated a 1 sigma sky-fixed pointing stability at 48 milliarcseconds over multiple 1 hour observations at float. This is achieved by actively tracking compound pendulations via a three-axis gimballed platform, which provides sky-fixed telescope stability at < 500 milliarcseconds and corrects for field rotation, while employing high-bandwidth tip/tilt optics to remove residual disturbances across the science imaging focal plane. SuperBIT's performance during the 2019 commissioning flight benefited from a customized high-fidelity science-capable telescope designed with exceptional thermo- and opto-mechanical stability as well as tightly constrained static and dynamic coupling between high-rate sensors and telescope optics. At the currently demonstrated level of flight performance, SuperBIT capabilities now surpass the science requirements for a wide variety of experiments in cosmology, astrophysics and stellar dynamics.

In response to the need for the Astro2020 Decadal Survey to explicitly engage early career astronomers, the National Academies of Sciences, Engineering, and Medicine hosted the Early Career Astronomer and Astrophysicist Focus Session (ECFS) on October 8-9, 2018 under the auspices of Committee of Astronomy and Astrophysics. The meeting was attended by fifty six pre-tenure faculty, research scientists, postdoctoral scholars, and senior graduate students, as well as eight former decadal survey committee members, who acted as facilitators. The event was designed to educate early career astronomers about the decadal survey process, to solicit their feedback on the role that early career astronomers should play in Astro2020, and to provide a forum for the discussion of a wide range of topics regarding the astrophysics career path. This white paper presents highlights and themes that emerged during two days of discussion. In Section 1, we discuss concerns that emerged regarding the coming decade and the astrophysics career path, as well as specific recommendations from participants regarding how to address them. We have organized these concerns and suggestions into five broad themes. These include (sequentially): (1) adequately training astronomers in the statistical and computational techniques necessary in an era of "big data", (2) responses to the growth of collaborations and telescopes, (3) concerns about the adequacy of graduate and postdoctoral training, (4) the need for improvements in equity and inclusion in astronomy, and (5) smoothing and facilitating transitions between early career stages. Section 2 is focused on ideas regarding the decadal survey itself, including: incorporating early career voices, ensuring diverse input from a variety of stakeholders, and successfully and broadly disseminating the results of the survey.

Balloon-borne telescopes present unique thermal design challenges which are a combination of those present for both space and ground telescopes. At altitudes of 35-40 km, convection effects are minimal and difficult to characterize. Radiation and conduction are the predominant heat transfer mechanisms reducing the thermal design options. For long duration flights payload mass is a function of power consumption making it an important optimization parameter. SuperBIT, or the Super-pressure Balloon-borne Imaging Telescope, aims to study weak lensing using a 0.5m modified Dall-Kirkham telescope capable of achieving 0.02" stability and capturing deep exposures from visible to near UV wavelengths. To achieve the theoretical stratospheric diffraction-limited resolution of 0.25", mirror deformation gradients must be kept to within 20nm. The thermal environment must thus be stable on time scales of an hour and the thermal gradients must be minimized on the telescope. SuperBIT plans to implement two types of parameter solvers; one to validate the thermal design and the other to tightly control the thermal environment.

Balloon-borne astronomy is a unique tool that allows for a level of image stability and significantly reduced atmospheric interference without the often prohibitive cost and long development time-scale that are characteristic of space-borne facility-class instruments. The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02" image stability over a 0.5 degree field-of-view for deep exposures within the visible-to-near-UV (300-900 um). As such, SuperBIT is a suitable platform for a wide range of balloon-borne observations, including solar and extrasolar planetary spectroscopy as well as resolved stellar populations and distant galaxies. We report on the overall payload design and instrumentation methodologies for SuperBIT as well as telescope and image stability results from two test flights. Prospects for the SuperBIT project are outlined with an emphasis on the development of a fully operational, three-month science flight from New Zealand in 2020.

We perform a detailed 2-dimensional weak gravitational lensing analysis of the nearby (z = 0.058) galaxy cluster Abell 3128 using deep ugrz imaging from the Dark Energy Camera (DECam). We have designed a pipeline to remove instrumental artifacts from DECam images and stack multiple dithered observations without inducing a spurious ellipticity signal. We develop a new technique to characterize the spatial variation of the PSF which enables us to circularize the field to better than 0.5% and thereby extract the intrinsic galaxy ellipticities. By fitting photometric redshifts to sources in the observation, we are able to select a sample of background galaxies for weak lensing analysis free from low-redshift contaminants. Photometric redshifts are also used to select a high-redshift galaxy subsample with which we successfully isolate the signal from an interloping z = 0.44 cluster. We estimate the total mass of Abell 3128 by fitting the tangential ellipticity of background galaxies with the weak lensing shear profile of an NFW halo, and also perform NFW fits to substructures detected in the 2-D mass maps of the cluster. This study yields one of the highest resolution mass maps of a low-z cluster to date, and is the first step in a larger effort to characterize the redshift evolution of mass substructures in clusters.

We present a detailed comparison between the photometric properties of the bulges of two simulated galaxies and those of a uniform sample of observed galaxies. This analysis shows that the simulated galaxies have bulges with realistic surface brightnesses for their sizes and magnitude. These two field disc galaxies have rotational velocities ~ 100 km/s and were integrated to a redshift of zero in a fully cosmological Lambda cold dark matter context as part of high-resolution smoothed particle hydrodynamic simulations. We performed bulge-disc decompositions of the galaxies using artificial observations, in order to conduct a fair comparison to observations. We also dynamically decomposed the galaxies and compared the star formation histories of the bulges to those of the entire galaxies. These star formation histories showed that the bulges were primarily formed before z = 1 and during periods of rapid star formation. Both galaxies have large amounts of early star formation, which is likely related to the relatively high bulge-to-disc ratios also measured for them. Unlike almost all previous cosmological simulations, the realistically concentrated bulges of these galaxies do not lead to unphysically high rotational velocities, causing them to naturally lie along the observed Tully-Fisher relation.

We compare the central mass distribution of galaxies simulated with three different models of the interstellar medium (ISM) with increasing complexity: primordial (H+He) cooling down to 10^4K, additional cooling via metal lines and to lower temperatures, and molecular hydrogen (H_2) with shielding of atomic and molecular hydrogen, in addition to metal line cooling. In order to analyze the effect of these models, we follow the evolution of four field galaxies with V_peak < 120 km/s to a redshift of zero using high-resolution Smoothed Particle Hydrodynamic simulations in a fully cosmological LCDM context. The spiral galaxies produced in simulations with either primordial cooling or H_2 physics have realistic, rising rotation curves. In contrast, the simulations with metal line cooling and otherwise similar feedback and star formation produced galaxies with the peaked rotation curves typical of most previous LCDM simulations of spiral galaxies. The less-massive bulges and non-peaked rotation curves in the galaxies simulated with primordial cooling or H_2 are linked to changes in the angular momentum distribution of the baryons. These galaxies had smaller amounts of low-angular momentum baryons because of increased gas loss from stellar feedback. When there is only primordial cooling, the star forming gas is hotter and the feedback-heated gas cools more slowly than when metal line cooling is included and so requires less energy to be expelled. When H_2 is included, the accompanying shielding produces large amounts of clumpy, cold gas where H_2 forms. Star formation in clumpy gas results in more concentrated supernova feedback and greater efficiency of mass loss. The higher feedback efficiency causes a decrease of low-angular momentum material. (abridged)

The X-ray light curves of pre-main sequence stars can show variability in the form of flares altering a baseline characteristic activity level; the largest X-ray flares are characterized by a rapid rise to more than 10 times the characteristic count rate, followed by a slower quasi-exponential decay. Analysis of these high-contrast X-ray flares enables the study of the innermost magnetic fields of pre-main sequence stars. We have scanned the ANCHORS database of Chandra observations of star-forming regions to extend the study of flare events on pre-main sequence stars both in sky coverage and in volume. We developed a sample of 30 high-contrast flares out of the 14,000 stars of various ages and masses available in ANCHORS at the start of our study. Applying methods of time-resolved spectral analysis, we obtain the temperatures, confining magnetic field strengths, and loop lengths of these bright, energetic flares. The results of the flare analysis are compared to the 2MASS and Spitzer data available for the stars in our sample. We find that the longest flare loop lengths (of order several stellar radii) are only seen on stars whose IR data indicates the presence of disks. This suggests that the longest flares may stretch all the way to the disk. Such long flares tend to be more tenuous than the other large flares studied. A wide range of loop lengths are observed, indicating that different types of flares may occur on disked young stellar objects.

A sample of very high resolution cosmological disk galaxy simulations is used to investigate the evolution of galaxy disk sizes back to redshift 1 within the Lambda CDM cosmology. Artificial images in the rest frame B band are generated, allowing for a measurement of disk scale lengths using surface brightness profiles as observations would, and avoiding any assumption that light must follow mass as previous models have assumed. We demonstrate that these simulated disks are an excellent match to the observed magnitude - size relation for both local disks, and for disks at z=1 in the magnitude/mass range of overlap. We disentangle the evolution seen in the population as a whole from the evolution of individual disk galaxies. In agreement with observations, our simulated disks undergo roughly 1.5 magnitudes/arcsec^2 of surface brightness dimming since z=1. We find evidence that evolution in the magnitude - size plane varies by mass, such that galaxies with M* > 10^9 M_sun undergo more evolution in size than luminosity, while dwarf galaxies tend to evolve potentially more in luminosity. The disks grow in such a way as to stay on roughly the same stellar mass - size relation with time. Finally, due to an evolving stellar mass - SFR relation, a galaxy at a given stellar mass (or size) at z=1 will reside in a more massive halo and have a higher SFR, and thus a higher luminosity, than a counterpart of the same stellar mass at z=0.