The formation of two stellar bars within a galaxy has proved challenging for numerical studies. It is yet not clear whether the inner bar is born via a star formation process promoted by gas inflow along the outer bar, or whether it is dynamically assembled from instabilities in a small-scale stellar disc. Observational constraints to these scenarios are scarce. We present a thorough study of the stellar content of two double-barred galaxies observed by the MUSE TIMER project, NGC 1291 and NGC 5850, combined with a two-dimensional multi-component photometric decomposition performed on the 3.6{\mu}m images from S4G. Our analysis confirms the presence of {\sigma}-hollows appearing in the stellar velocity dispersion distribution at the ends of the inner bars. Both galaxies host inner discs matching in size with the inner bars, suggestive of a dynamical formation for the inner bars from small-scale discs. The analysis of the star formation histories for the structural components shaping the galaxies provides constraints on the epoch of dynamical assembly of the inner bars, which took place >6.5 Gyr ago for NGC 1291 and >4.5 Gyr ago for NGC 5850. This implies that inner bars are long-lived structures.

The stellar velocity ellipsoid (SVE) in galaxies can provide important information on the processes that participate in the dynamical heating of their disc components (e.g. giant molecular clouds, mergers, spiral density waves, bars). Earlier findings suggested a strong relation between the shape of the disc SVE and Hubble type, with later-type galaxies displaying more anisotropic ellipsoids and early-types being more isotropic. In this paper, we revisit the strength of this relation using an exhaustive compilation of observational results from the literature on this issue. We find no clear correlation between the shape of the disc SVE and morphological type, and show that galaxies with the same Hubble type display a wide range of vertical-to-radial velocity dispersion ratios. The points are distributed around a mean value and scatter of $\sigma_z/\sigma_R=0.7\pm 0.2$. With the aid of numerical simulations, we argue that different mechanisms might influence the shape of the SVE in the same manner and that the same process (e.g. mergers) does not have the same impact in all the galaxies. The complexity of the observational picture is confirmed by these simulations, which suggest that the vertical-to-radial axis ratio of the SVE is not a good indicator of the main source of disc heating. Our analysis of those simulations also indicates that the observed shape of the disc SVE may be affected by several processes simultaneously and that the signatures of some of them (e.g. mergers) fade over time.

We have used Spitzer images of a sample of 68 barred spiral galaxies in the local universe to make systematic measurements of bar length and bar strength. We combine these with precise determinations of the corotation radii associated with the bars, taken from our previous study which used the phase change from radial inflow to radial outflow of gas at corotation, based on high resolution two-dimensional velocity fields in H{\alpha} taken with a Fabry-P\'erot spectrometer. After presenting the histograms of the derived bar parameters, we study their dependence on the galaxy morphological type and on the total stellar mass of the host galaxy, and then produce a set of parametric plots. These include the bar pattern speed versus bar length, the pattern speed normalized with the characteristic pattern speed of the outer disk versus the bar strength, and the normalized pattern speed versus R, the ratio of corotation radius to bar length. To provide guide-lines for our interpretation we used a recently published simulations, including disk and dark matter halo components. Our most striking conclusion is that bars with values of R < 1.4, previously considered dynamically fast rotators, can be among the slowest rotators both in absolute terms and when their pattern speeds are normalized. The simulations confirm that this is because as the bars are braked they can grow longer more quickly than the outward drift of the corotation radius. We conclude that dark matter halos have indeed slowed down the rotation of bars on Gyr timescales.

This is the second paper of a series aimed to study the stellar kinematics and population properties of bulges in highly-inclined barred galaxies. In this work, we carry out a detailed analysis of the stellar age, metallicity and [Mg/Fe] of 28 highly-inclined ($i > 65^{o}$) disc galaxies, from S0 to S(B)c, observed with the SAURON integral-field spectrograph. The sample is divided into two clean samples of barred and unbarred galaxies, on the basis of the correlation between the stellar velocity and h$_3$ profiles, as well as the level of cylindrical rotation within the bulge region. We find that while the mean stellar age, metallicity and [Mg/Fe] in the bulges of barred and unbarred galaxies are not statistically distinct, the [Mg/Fe] gradients along the minor axis (away from the disc) of barred galaxies are significantly different than those without bars. For barred galaxies, stars that are vertically further away from the midplane are in general more [Mg/Fe]--enhanced and thus the vertical gradients in [Mg/Fe] for barred galaxies are mostly positive, while for unbarred bulges the [Mg/Fe] profiles are typically negative or flat. This result, together with the old populations observed in the barred sample, indicates that bars are long-lasting structures, and therefore are not easily destroyed. The marked [Mg/Fe] differences with the bulges of unbarred galaxies indicate that different formation/evolution scenarios are required to explain their build-up, and emphasizes the role of bars in redistributing stellar material in the bulge dominated regions.

We continue the exploration of the BaLROG (Bars in Low Redshift Optical Galaxies) sample: 16 large mosaics of barred galaxies observed with the integral field unit SAURON. We quantify the influence of bars on the composition of the stellar component. We derive linestrength indices of H${\beta}$, Fe5015 and Mgb. Based on single stellar population (SSP) models, we calculate ages, metallicities and [Mg/Fe] abundances and their gradients along the bar major and minor axes. The high spatial resolution of our data allows us to identify breaks among index and SSP profiles, commonly at 0.13$\pm$0.06 bar length, consistent with kinematic features. Inner gradients are about ten times steeper than outer gradients and become larger when there is a central rotating component, implying that the gradients are not independent of dynamics and orbits. Central ages appear to be younger for stronger bars. Yet, the bar regions are usually old. We find a flattening of the iron (Fe5015) and magnesium (Mgb) outer gradients along the bar major axis, translating into a flattening of the metallicity gradient. This gradient is found to be 0.03$\pm$0.07 dex/kpc along the bar major axis while the mean value of the bar minor axis compares well with that of an unbarred control sample and is significantly steeper, namely -0.20$\pm$0.04 dex/kpc. These results confirm recent simulations and discern the important localized influence of bars. The elevated [Mg/Fe] abundances of bars and bulges compared to the lower values of discs suggest an early formation, in particular for early type galaxies.

We present SAURON integral-field observations of a sample of 12 mid to high-inclination disk galaxies, to unveil hidden bars on the basis of their kinematics, i.e., the correlation between velocity and h3 profiles, and to establish their degree of cylindrical rotation. For the latter, we introduce a method to quantify cylindrical rotation that is robust against inner disk components. We confirm high-levels of cylindrical rotation in boxy/peanut bulges, but also observe this feature in a few galaxies with rounder bulges. We suggest that these are also barred galaxies with end-on orientations. Re-analysing published data for our own Galaxy using this new method, we determine that the Milky Way bulge is cylindrically rotating at the same level as the strongest barred galaxy in our sample. Finally, we use self-consistent three-dimensional N-body simulations of bar-unstable disks to study the dependence of cylindrical rotation on the bar's orientation and host galaxy inclination.

We present the BaLROG (Bars in Low Redshift Optical Galaxies) sample of 16 morphologically distinct barred spirals to characterise observationally the influence of bars on nearby galaxies. Each galaxy is a mosaic of several pointings observed with the IFU spectrograph SAURON leading to a tenfold sharper spatial resolution (~100 pc) compared to ongoing IFU surveys. In this paper we focus on the kinematic properties. We calculate the bar strength Qb from classical torque analysis using 3.6 {\mu}m Spitzer (S4G) images, but also develop a new method based solely on the kinematics. A correlation between the two measurements is found and backed up by N-body simulations, verifying the measurement of Qb . We find that bar strengths from ionised gas kinematics are ~2.5 larger than those measured from stellar kinematics and that stronger bars have enhanced influence on inner kinematic features. We detect that stellar angular momentum "dips" at 0.2$\pm$0.1 bar lengths and half of our sample exhibits an anti-correlation of h3 - stellar velocity (v/{\sigma}) in these central parts. An increased flattening of the stellar {\sigma} gradient with increasing bar strength supports the notion of bar-induced orbit mixing. These measurements set important constraints on the spatial scales, namely an increasing influence in the central regions (0.1-0.5 bar lengths), revealed by kinematic signatures due to bar-driven secular evolution in present day galaxies.

The aim of our study is to use dynamical simulations to explore the influence of two important dynamical bar parameters, bar strength and bar pattern speed, on the shape of the bar dust lanes. To quantify the shape of the dust lanes we have developed a new systematic method to measure the dust lane curvature. Previous numerical simulations have compared the curvature of bar dust lanes with the bar strength, predicting a relation between both parameters which has been supported by observational studies but with a large spread. We take into account the bar pattern speed to explore, simultaneously, the effect of both parameters on the dust lane shape. To that end, we separate our galactic bars in fast bars $\left(1 < \mathcal{R} < 1.4 \right)$ and slow bars $\left(\mathcal{R} > 1.4 \right)$, obtaining, as previous simulations, an inverse relation between the dust lane curvature and the bar strength for fast bars. For the first time, we extend the study to slow bars, finding a constant curvature as a function of the bar strength. As a result, we conclude that weak bars with straight dust lanes are candidates for slow bars. Finally, we have analysed a pilot sample of ten S$^4$G galaxies, obtaining dust lane curvatures lying within the range covered by the simulations.

We present SAURON integral-field stellar velocity and velocity dispersion maps for four double-barred early-type galaxies: NGC2859, NGC3941, NGC4725 and NGC5850. The presence of the inner bar does not produce major changes in the line-of-sight velocity, but it appears to have an important effect in the stellar velocity dispersion maps: we find two sigma-hollows of amplitudes between 10 and 40 km/s on either side of the center, at the ends of the inner bars. We have performed numerical simulations to explain these features. Ruling out other possibilities, we conclude that the sigma-hollows are an effect of the contrast between two kinematically different components: the high velocity dispersion of the bulge and the more ordered motion (low velocity dispersion) of the inner bar.