The properties of the smallest subunits of cometary dust contain information on their origin and clues to the formation of planetesimals and planets. Compared to IDPs or particles collected during the Stardust mission, dust collected in the coma of comet 67P/Churyumov-Gerasimenko during the Rosetta mission provides a resource of minimally altered material with known origin whose structural properties can be used to further the investigation of our early Solar System. A novel method is presented to achieve the highest spatial resolution of imaging possible with the MIDAS Atomic Force Microscope on-board Rosetta. 3D topographic images with resolutions of down to 8\,nm are analysed to determine the subunit sizes of particles on the nanometre scale. Three morphological classes can be determined, namely (i) fragile agglomerate particles of sizes larger than about 10\,$\mathrm{\mu m}$ comprised by micrometre-sized subunits that may be again aggregates and show a moderate packing density on the surface of the particles; (ii) a fragile agglomerate with a size about few tens of micrometres comprised by micrometre-sized subunits suggested to be again aggregates and arranged in a structure with a fractal dimension less than two; (iii) small, micrometre-sized particles comprised by subunits in the hundreds of nanometres size range that show surface features suggested to again represent subunits. Their differential size distributions follow a log-normal distribution with means about 100\,nm and standard deviations between 20 and 35\,nm. All micrometre-sized particles are hierarchical dust agglomerates of smaller subunits. The arrangement, appearance and size distribution of the smallest determined surface features are reminiscent of those found in CP IDPs and they represent the smallest directly detected subunits of comet 67P.

Cometary dust particles are remnants of the primordial accretion of refractory material that occurred during the initial stages of the Solar System formation. Understanding their physical structure can help constrain their accretion process. We have developed a simple numerical simulation of aggregate impact flattening to interpret the properties of particles collected by COSIMA. The aspect ratios of flattened particles from both simulations and observations are compared to differentiate between initial families of aggregates characterized by different fractal dimensions $D_f$. This dimension can differentiate between certain growth modes. The diversity of aspect ratios measured by COSIMA is consistent with either two families of aggregates with different initial $D_f$ (a family of compact aggregates with fractal dimensions close to 2.5-3 and some fluffier aggregates with fractal dimensions around 2). Alternatively, the distribution of morphologies seen by COSIMA could originate from a single type of aggregation process, such as DLPA, but to explain the range of aspect ratios observed by COSIMA a large range of dust particle cohesive strength is necessary. Furthermore, variations in cohesive strength and velocity may play a role in the higher aspect ratio range detected (>0.3). Our work allows us to explain the particle morphologies observed by COSIMA and those generated by laboratory experiments in a consistent framework. Taking into account all observations from the three dust instruments on-board Rosetta, we favor an interpretation of our simulations based on two different families of dust particles with significantly distinct fractal dimensions ejected from the cometary nucleus.

Before Rosetta, the space missions Giotto and Stardust shaped our view on cometary dust, supported by plentiful data from Earth based observations and interplanetary dust particles collected in the Earth's atmosphere. The Rosetta mission at comet 67P/Churyumov-Gerasimenko was equipped with a multitude of instruments designed to study cometary dust. While an abundant amount of data was presented in several individual papers, many focused on a dedicated measurement or topic. Different instruments, methods, and data sources provide different measurement parameters and potentially introduce different biases. This can be an advantage if the complementary aspect of such a complex data set can be exploited. However, it also poses a challenge in the comparison of results in the first place. The aim of this work therefore is to summarise dust results from Rosetta and before. We establish a simple classification as a common framework for inter-comparison. This classification is based on a dust particle's structure, porosity, and strength as well as its size. Depending on the instrumentation, these are not direct measurement parameters but we chose them as they were the most reliable to derive our model. The proposed classification already proved helpful in the Rosetta dust community and we propose to take it into consideration also beyond. In this manner we hope to better identify synergies between different instruments and methods in the future.

The Hesperos mission proposed in this paper is a mission to Venus to investigate the interior structure and the current level of activity. The main questions to be answered with this mission are whether Venus has an internal structure and composition similar to Earth and if Venus is still tectonically active. To do so the mission will consist of two elements: an orbiter to investigate the interior and changes over longer periods of time and a balloon floating at an altitude between 40 and 60\~km to investigate the composition of the atmosphere. The mission will start with the deployment of the balloon which will operate for about 25 days. During this time the orbiter acts as a relay station for data communication with Earth. Once the balloon phase is finished the orbiter will perform surface and gravity gradient mapping over the course of 7 Venus days. This mission proposal is the result of the Alpbach Summer School and the post-Alpbach week.

The processes that led to the formation of the planetary bodies in the Solar System are still not fully understood. Using the results obtained with the comprehensive suite of instruments on-board ESA's Rosetta mission, we present evidence that comet 67P/Churyumov-Gerasimenko likely formed through the gentle gravitational collapse of a bound clump of mm-sized dust aggregates ("pebbles"), intermixed with microscopic ice particles. This formation scenario leads to a cometary make-up that is simultaneously compatible with the global porosity, homogeneity, tensile strength, thermal inertia, vertical temperature profiles, sizes and porosities of emitted dust, and the steep increase in water-vapour production rate with decreasing heliocentric distance, measured by the instruments on-board the Rosetta spacecraft and the Philae lander. Our findings suggest that the pebbles observed to be abundant in protoplanetary discs around young stars provide the building material for comets and other minor bodies.

The Langmuir Probe instrument on Rosetta monitored the photoelectron emission cur- rent of the probes during the Rosetta mission at comet 67P/Churyumov-Gerasimenko, in essence acting as a photodiode monitoring the solar ultraviolet radiation at wave- lengths below 250 nm. We have used three methods of extracting the photoelectron saturation current from the Langmuir probe measurements. The resulting dataset can be used as an index of the solar far and extreme ultraviolet at the Rosetta spacecraft position, including flares, in wavelengths that are important for photoionisation of the cometary neutral gas. Comparing the photoemission current to data measurements by MAVEN/EUVM and TIMED/SEE, we find good correlation when 67P was at large heliocentric distances early and late in the mission, but up to 50 percent decrease of the expected photoelectron current at perihelion. We discuss possible reasons for the photoemission decrease, including scattering and absorption by nanograins created by disintegration of cometary dust far away from the nucleus.

Cometary dust provides a unique window on dust growth mechanisms during the onset of planet formation. Measurements by the Rosetta spacecraft show that the dust in the coma of comet 67P/Churyumov-Gerasimenko has a granular structure at size scales from sub-um up to several hundreds of um, indicating hierarchical growth took place across these size scales. However, these dust particles may have been modified during their collection by the spacecraft instruments. Here we present the results of laboratory experiments that simulate the impact of dust on the collection surfaces of COSIMA and MIDAS, instruments onboard the Rosetta spacecraft. We map the size and structure of the footprints left by the dust particles as a function of their initial size (up to several hundred um) and velocity (up to 6 m/s). We find that in most collisions, only part of the dust particle is left on the target; velocity is the main driver of the appearance of these deposits. A boundary between sticking/bouncing and fragmentation as an outcome of the particle-target collision is found at v ~ 2 m/s. For velocities below this value, particles either stick and leave a single deposit on the target plate, or bounce, leaving a shallow footprint of monomers. At velocities > 2 m/s and sizes > 80 um, particles fragment upon collision, transferring up to 50 per cent of their mass in a rubble-pile-like deposit on the target plate. The amount of mass transferred increases with the impact velocity. The morphologies of the deposits are qualitatively similar to those found by the COSIMA instrument.

Comets are thought to preserve almost pristine dust particles, thus providing a unique sample of the properties of the early solar nebula. The microscopic properties of this dust played a key part in particle aggregation during the formation of the Solar System. Cometary dust was previously considered to comprise irregular, fluffy agglomerates on the basis of interpretations of remote observations in the visible and infrared and the study of chondritic porous interplanetary dust particles that were thought, but not proved, to originate in comets. Although the dust returned by an earlier mission has provided detailed mineralogy of particles from comet 81P/Wild, the fine-grained aggregate component was strongly modified during collection. Here we report in situ measurements of dust particles at comet 67P/Churyumov-Gerasimenko. The particles are aggregates of smaller, elongated grains, with structures at distinct sizes indicating hierarchical aggregation. Topographic images of selected dust particles with sizes of one micrometre to a few tens of micrometres show a variety of morphologies, including compact single grains and large porous aggregate particles, similar to chondritic porous interplanetary dust particles. The measured grain elongations are similar to the value inferred for interstellar dust and support the idea that such grains could represent a fraction of the building blocks of comets. In the subsequent growth phase, hierarchical agglomeration could be a dominant process and would produce aggregates that stick more easily at higher masses and velocities than homogeneous dust particles. The presence of hierarchical dust aggregates in the near-surface of the nucleus of comet 67P also provides a mechanism for lowering the tensile strength of the dust layer and aiding dust release.

The Micro-Imaging Dust Analysis System (MIDAS) atomic force microscope (AFM) onboard the Rosetta orbiter was the first such instrument launched into space in 2004. Designed only a few years after the technique was invented, MIDAS is currently orbiting comet 67P Churyumov-Gerasimenko and producing the highest resolution 3D images of cometary dust ever made in situ. After more than a year of continuous operation much experience has been gained with this novel instrument. Coupled with operations of the Flight Spare and advances in terrestrial AFM a set of "lessons learned" has been produced, cumulating in recommendations for future spaceborne atomic force microscopes. The majority of the design could be reused as-is, or with incremental upgrades to include more modern components (e.g. the processor). Key additional recommendations are to incorporate an optical microscope to aid the search for particles and image registration, to include a variety of cantilevers (with different spring constants) and a variety of tip geometries.