The atmospheric monitoring devices for the planned calibration system of the Cherenkov Telescope Array (CTA) are undergoing intensive development, prototyping and testing. The All-Sky Cameras, the Sun/Moon Photometers and the FRAM telescopes have been gradually deployed at the future CTA sites with the primary goal of site characterization, simultaneously allowing the assessment of their operational reliability in realistic environmental conditions. All three devices have shown the ability to work smoothly in both the extreme dryness and the large temperature variations of the southern site as well as in the occasional adverse weather during winter months at the northern site. The target availability of 95\% of time has not yet been reached mostly due to minor hardware failures that have proven difficult to fix due to the remoteness of the installation in the absence of the future CTA infrastructure. The experience gathered during the prototype operations will contribute to the improved reliability of the final instruments. The Raman LIDARs, described in separate proceedings of this conference, and the infrared Ceilometer, ready for testing in Prague, will complement the set of atmospheric calibration devices in near future. The final operational procedures for the atmospheric calibration of the CTA during its operation are being finalized foreseeing the use of the All-sky Cameras and the Ceilometer for the monitoring of clouds over the whole sky and the LIDARs and FRAMs for precision measurements of the atmospheric transmission as a function of altitude and position within the field-of-view of the CTA array.

Advanced knowledge of the detailed atmospheric properties of both the future sites of the Cherenkov Telescope Array is essential in preparation of the arrival of the first scientific data. Meteorological variables are studied using a dedicated characterization station installed at the southern site in Chile and a wealth of data from existing observatories around the northern site on the La Palma island. Campaigns using radiosondes launched on balloons are foreseen to complement these data in the near future. Cloudiness during the night has been continuously monitored at both sites for several years using All-sky Cameras which assess the presence of clouds based on detection of stars. The integrated aerosol optical depth over the southern site has been measured using a Sun/Moon Photometer since 2016 and the small robotic FRAM telescope since 2017; identical instruments have been deployed at the northern site in autumn 2018. Also in October 2018, the ARCADE Raman lidar (RL) has started to take measurements on routine basis at the northern site, providing data on the vertical profile of the aerosol optical properties (i.e., extinction and scattering) and of the water vapour mixing ratio. We present the data currently available from these instruments from both sites with emphasis on characteristics important for the (future) operation of Imaging Atmospheric Cherenkov Telescopes.

A FRAM (F/(Ph)otometric Robotic Atmospheric Monitor) telescope is a system of a robotic mount, a large-format CCD camera and a fast telephoto lens that can be used for atmospheric monitoring at any site when information about the atmospheric transparency is required with high spatial or temporal resolution and where continuous use of laser-based methods for this purpose would interfere with other observations. The original FRAM has been operated at the Pierre Auger Observatory in Argentina for more than a decade, while three more FRAMs are foreseen to be used by the Cherenkov Telescope Array (CTA). The CTA FRAMs are being deployed ahead of time to characterize the properties of the sites prior to the operation of the CTA telescopes; one FRAM has been running on the planned future CTA site in Chile for a year while two others are expected to become operational before the end of 2018. We report on the hardware and current status of operation and/or deployment of all the FRAM instruments in question as well as on some of the preliminary results of integral aerosol measurements by the FRAMs in Argentina and Chile

The idea of using stellar photometry for atmospheric monitoring for optical experiments in high-energy astrophysics is seemingly straightforward, but reaching high precision of the order of 0.01 in the determination of the vertical aerosol optical depth (VAOD) has proven difficult. Wide-field photometry over a large span of altitudes allows a fast determination of VAOD independently of the absolute calibration of the system, while providing this calibration as a useful by-product. Using several years of data taken by the FRAM (F/(Ph)otometric Robotic Atmospheric Monitor) telescope at the Pierre Auger Observatory in Argentina and about a year of data taken by a similar instrument deployed at the planned future Southern site of the Cherenkov Telescope Array in Chile, we have developed methods to improve the precision of this measurement technique towards and possibly beyond the 0.01 mark. Detailed laboratory measurements of the response of the whole system to both the spectrum and intensity of incoming light have proven indispensable in this analysis as the usual assumption of linearity of the CCD detectors is not valid anymore for the conditions of the observations.

Many atmospheric and climatic criteria have to be taken into account for the selection of a suitable site for the next generation of imaging air-shower Cherenkov telescopes, the "Cherenkov Telescope Array" CTA. Such data are not available with sufficient precision, thus a comparison of the proposed sites and final decision based on a comprehensive characterization is impossible. Identical cross-calibrated instruments have been developed which allow for precise comparison between sites, the cross-validation of existing data, and the ground-validation of satellite data. The site characterization work package of the CTA consortium opted to construct and deploy 9 copies of an autonomous multi-purpose weather sensor, incorporating an infrared cloud sensor, a newly developed sensor for measuring the light of the night sky, and an All-Sky-Camera, the whole referred to as Autonomous Tool for Measuring Observatory Site COnditions PrEcisely (ATMOSCOPE). We present here the hardware that was combined into the ATMOSCOPE and characterize its performance.

The All Sky Camera (ASC) was developed as a universal device for the monitoring of the night sky quality. Eight ASCs are already installed and measure night sky parameters at eight of the candidate sites of the Cherenkov Telescope Array (CTA) gamma-ray observatory. The ACS system consists of an astronomical CCD camera, a fish eye lens, a control computer and associated electronics. The measurement is carried out during astronomical night. The images are automatically taken every 5 minutes and automatically processed using the control computer of the device. The analysis results are the cloud fraction (the percentage of the sky covered by clouds) and night sky brightness (in mag/arcsec$^{2}$)

We present a discovery and observation of an extraordinarily bright prompt optical emission of the GRB 060117 obtained by a wide-field camera atop the robotic telescope FRAM of the Pierre Auger Observatory from 2 to 10 minutes after the GRB. We found rapid average temporal flux decay of alpha = -1.7 +- 0.1 and a peak brightness R = 10.1 mag. Later observations by other instruments set a strong limit on the optical and radio transient fluxes, unveiling an unexpectedly rapid further decay. We present an interpretation featuring a relatively steep electron-distribution parameter p ~ 3.0 and providing a straightforward solution for the overall fast decay of this optical transient as a transition between reverse and forward shock.