Breakthroughs in our understanding of physical phenomena have traditionally followed improvements in instrumentation. Studies of the magnetic field of the Sun, and its influence on the solar dynamo and space weather events, have benefited from improvements in resolution and measurement frequency of new instruments. However, in order to fully understand the solar cycle, high-quality data across time-scales longer than the typical lifespan of a solar instrument are required. At the moment, discrepancies between measurement surveys prevent the combined use of all available data. In this work, we show that machine learning can help bridge the gap between measurement surveys by learning to \textbf{super-resolve} low-resolution magnetic field images and \textbf{translate} between characteristics of contemporary instruments in orbit. We also introduce the notion of physics-based metrics and losses for super-resolution to preserve underlying physics and constrain the solution space of possible super-resolution outputs.

Machine learning techniques have been successfully applied to super-resolution tasks on natural images where visually pleasing results are sufficient. However in many scientific domains this is not adequate and estimations of errors and uncertainties are crucial. To address this issue we propose a Bayesian framework that decomposes uncertainties into epistemic and aleatoric uncertainties. We test the validity of our approach by super-resolving images of the Sun's magnetic field and by generating maps measuring the range of possible high resolution explanations compatible with a given low resolution magnetogram.

Magnetic reconnection is believed to be the primary mechanism by which non-potential energy stored in coronal magnetic fields is rapidly released during solar eruptive events. Unfortunately, owing to the small spatial scales on which reconnection is thought to occur, it is not directly observable in the solar corona. However, larger scale processes, such as associated inflow and outflow, and signatures of accelerated particles have been put forward as evidence of reconnection. We explore the origin of a persistent Type I radio source that accompanies a coronal X--shaped structure during its passage across the disk. Of particular interest is the time range around a partial collapse of the structure that is associated with inflow, outflow, and signatures of particle acceleration. Imaging radio observations from the NRH were used to localise the radio source. SDO AIA EUV observations from the same time period were analysed, looking for evidence of inflows and outflows. Further \texttt{mpole} magnetic reconstructions using SDO HMI observations allowed the magnetic connectivity associated with the radio source to be determined. The Type I radio source was well aligned with a magnetic separator identified in the extrapolations. During the partial collapse, gradual (1 km/s) and fast (5 km/s) inflow phases and fast (30 km/s) and rapid (80-100 km/s) outflow phases were observed, resulting in an estimated reconnection rate of ~ 0.06. The radio source brightening and dimming was found to be co-temporal with increased soft x-ray emission in both RHESSI and GOES. We interpret the brightening and dimming of the radio emission as evidence for accelerated electrons in the reconnection region responding to a gradual fall and rapid rise in electric drift velocity, in response to the inflowing and outflowing field lines. These results present a comprehensive example of 3D null-point reconnection.

The study of solar eruptive events and associated phenomena is of great importance in the context of solar and heliophysics. Coronal mass ejections (CMEs) and coronal waves are energetic manifestations of the restructuring of the solar magnetic field and mass motion of the plasma. Characterising this motion is vital for deriving the dynamics of these events and thus understanding the physics driving their initiation and propagation. The development and use of appropriate methods for measuring event kinematics is therefore imperative. Traditional approaches to the study of CME and coronal wave kinematics do not return wholly accurate nor robust estimates of the true event kinematics and associated uncertainties. We highlight the drawbacks of these approaches, and demonstrate improved methods for accurate and reliable determination of the kinematics. The Savitzky-Golay filter is demonstrated as a more appropriate fitting technique for CME and coronal wave studies, and a residual resampling bootstrap technique is demonstrated as a statistically rigorous method for the determination of kinematic error estimates and goodness-of-fit tests. It is shown that the scatter on distance-time measurements of small sample size can significantly limit the ability to derive accurate and reliable kinematics. This may be overcome by (i) increasing measurement precision and sampling cadence, and (ii) applying robust methods for deriving the kinematics and reliably determining their associated uncertainties. If a priori knowledge exists and a pre-determined model form for the kinematics is available (or indeed any justified fitting-form to be tested against the data), then its precision can be examined using a bootstrapping technique to determine the confidence interval associated with the model/fitting parameters.

Solar Coronal mass ejections (CMEs) are large-scale ejections of plasma and magnetic field from the corona, which propagate through interplanetary space. CMEs are the most significant drivers of adverse space weather on Earth, but the physics governing their propagation through the Heliosphere is not well understood. This is mainly due to the limited fields-of-view and plane-of-sky projected nature of previous observations. The Solar Terrestrial Relations Observatory (STEREO) mission launched in October 2006, was designed to overcome these limitations. In this thesis, a method for the full three dimensional (3D) reconstruction of the trajectories of CMEs using STEREO was developed. Using the 3D trajectories, the true kinematics were derived, which were free from projection effects. Evidence for solar wind (SW) drag forces acting in interplanetary space were found, with a fast CME decelerated and a slow CME accelerated toward typical SW velocities. It was also found that the fast CME showed a linear dependence on the velocity difference between the CME and the SW, while the slow CME showed a quadratic dependence. The differing forms of drag for the two CMEs indicated the forces responsible for their acceleration may have been different. CMEs are known to generate bow shocks as they propagate through the corona and SW. Although CME-driven shocks have previously been detected indirectly via their emission at radio frequencies, direct imaging has remained elusive due to their low contrast at optical wavelengths. Using STEREO observations, the first images of a CME-driven shock as it propagates through interplanetary space from 8 R_Sun to 120 R_Sun (0.5 AU) were captured. These observations were compared to empirically derived relation and in general showed good agreement.

Fast coronal mass ejections (CMEs) generate standing or bow shocks as they propagate through the corona and solar wind. Although CME shocks have previously been detected indirectly via their emission at radio frequencies, direct imaging has remained elusive due to their low contrast at optical wavelengths. Here we report the first images of a CME-driven shock as it propagates through interplanetary space from 8R_Sun to 120R_Sun (0.5AU), using observations from the STEREO Heliospheric Imager (HI). The CME was measured to have a velocity of ~1000 km/s and a Mach number of 4.1\pm1.2, while the shock front stand-off distance (Delta) was found to increase linearly to ~20 R_Sun at 0.5 AU. The normalised standoff distance (Delta/DO) showed reasonable agreement with semi-empirical relations, where D_O is the CME radius. However, when normalised using the radius of curvature, Delta/R_O did not agree well with theory, implying that R_O was under-estimated by a factor of ~3-8. This is most likely due to the difficulty in estimating the larger radius of curvature along the CME axis from the observations, which provide only a cross-sectional view of the CME.

Solar coronal mass ejections (CMEs) are the most significant drivers of adverse space weather at Earth, but the physics governing their propagation through the heliosphere is not well understood. While stereoscopic imaging of CMEs with the Solar Terrestrial Relations Observatory (STEREO) has provided some insight into their three-dimensional (3D) propagation, the mechanisms governing their evolution remain unclear due to difficulties in reconstructing their true 3D structure. Here we use a new elliptical tie-pointing technique to reconstruct a full CME front in 3D, enabling us to quantify its deflected trajectory from high latitudes along the ecliptic, and measure its increasing angular width and propagation from 2-46 solar radii (approximately 0.2 AU). Beyond 7 solar radii, we show that its motion is determined by an aerodynamic drag in the solar wind and, using our reconstruction as input for a 3D magnetohydrodynamic simulation, we determine an accurate arrival time at the Lagrangian L1 point near Earth.

Coronal mass ejections (CMEs) are large-scale ejections of plasma and magnetic field from the solar corona, which propagate through interplanetary space at velocities of $\sim$100--2500~km~s$^{-1}$. Although plane-of-sky coronagraph measurements have provided some insight into their kinematics near the Sun ($<$32~R$_\odot$), it is still unclear what forces govern their evolution during both their early acceleration and later propagation. Here, we use the dual perspectives of the Solar TErrestrial RElations Observatory (STEREO) spacecrafts to derive the three-dimensional kinematics of CMEs over a range of heliocentric distances ($\sim$2--250\,R$_{\odot}$). We find evidence for solar wind (SW) drag-forces acting in interplanetary space, with a fast CME decelerated and a slow CME accelerated towards typical SW velocities. We also find that the fast CME showed linear ($\delta=1$) dependence on the velocity difference between the CME and the SW, while the slow CME showed a quadratic ($\delta=2$) dependence. The differing forms of drag for the two CMEs indicate the forces and thus mechanism responsible for there acceleration may be different.

A method for the full three-dimensional (3-D) reconstruction of the trajectories of coronal mass ejections (CMEs) using Solar TErrestrial RElations Observatory (STEREO) data is presented. Four CMEs that were simultaneously observed by the inner and outer coronagraphs (COR1 and 2) of the Ahead and Behind STEREO satellites were analysed. These observations were used to derive CME trajectories in 3-D out to ~15Rsun. The reconstructions using COR1/2 data support a radial propagation model. Assuming pseudo-radial propagation at large distances from the Sun (15-240Rsun), the CME positions were extrapolated into the Heliospheric Imager (HI) field-of-view. We estimated the CME velocities in the different fields-of-view. It was found that CMEs slower than the solar wind were accelerated, while CMEs faster than the solar wind were decelerated, with both tending to the solar wind velocity.