Sulphur is one of the most abundant elements in the Universe. Surprisingly, sulphuretted molecules are not as abundant as expected in the interstellar medium, and the identity of the main sulphur reservoir is still an open question. Our goal is to investigate the H$_{2}$S chemistry in dark clouds, as this stable molecule is a potential sulphur reservoir. Using millimeter observations of CS, SO, H$_{2}$S, and their isotopologues, we determine the physical conditions and H$_{2}$S abundances along the cores TMC 1-C, TMC 1-CP, and Barnard 1b. The gas-grain model Nautilus is then used to model the sulphur chemistry and explore the impact of photo-desorption and chemical desorption on the H$_2$S abundance. Our model shows that chemical desorption is the main source of gas-phase H$_2$S in dark cores. The measured H$_{2}$S abundance can only be fitted if we assume that the chemical desorption rate decreases by more than a factor of 10 when $n_{\rm H}>2\times10^{4}$. This change in the desorption rate is consistent with the formation of thick H$_2$O and CO ice mantles on grain surfaces. The observed SO and H$_2$S abundances are in good agreement with our predictions adopting an undepleted value of the sulphur abundance. However, the CS abundance is overestimated by a factor of $5-10$. Along the three cores, atomic S is predicted to be the main sulphur reservoir. We conclude that the gaseous H$_2$S abundance is well reproduced, assuming undepleted sulphur abundance and chemical desorption as the main source of H$_2$S. The behavior of the observed H$_{2}$S abundance suggests a changing desorption efficiency, which would probe the snowline in these cores. Our model, however, overestimates the observed gas-phase CS abundance. Given the uncertainty in the sulphur chemistry, our data are consistent with a cosmic elemental S abundance with an uncertainty of a factor of 10.

We started a multi-scale analysis of G202.3+2.5, an intertwined filamentary region of Monoceros OB1. In Paper I, we examined the distributions of dense cores and protostars and found enhanced star formation (SF) activity in the junction region of the filaments. In this second paper, we aim to unveil the connections between the core and filament evolutions, and between the filament dynamics and the global evolution of the cloud. We characterise the gas dynamics and energy balance using Herschel and WISE observations and molecular tracers observed with the IRAM 30m and TRAO 14m telescopes. The velocity field of the cloud is examined and velocity-coherent structures are put in perspective with the cloud environment. Two main velocity components (VCs) are revealed, well separated in the north and merged around the location of intense N2H+ emission where Paper I found the peak of SF activity. The relative position of the two VCs along the sightline, and the velocity gradient in N2H+ emission imply that the VCs have been undergoing collision for ~10^5 yrs. The dense gas where N2H+ is detected is interpreted as the compressed region between the two filaments, which corresponds to a high mass inflow rate of ~1e-3 Msun/yr and possibly leads to an increase in its SF efficiency. We identify a protostar in the junction region that possibly powers two crossed intermittent outflows. We show that the HII region around the nearby cluster NCG 2264 is still expanding and its role in the collision is examined. However, we cannot rule out the idea that the collision arises mostly from the global collapse of the cloud. The (sub-)filament-scale observables examined in this paper reveal a collision between G202.3+2.5 sub-structures and its probable role in feeding the cores in the junction region. One must now characterise the cloud morphology, its fragmentation, and magnetic field, all at high resolution.

Current theories and models attempt to explain star formation globally, from core scales to giant molecular cloud scales. A multi-scale observational characterisation of an entire molecular complex is necessary to constrain them. We investigate star formation in G202.3+2.5, a ~10x3 pc sub-region of the Monoceros OB1 cloud with a complex morphology harbouring interconnected filamentary structures. We aim to connect the evolution of cores and filaments in G202.3+2.5 with the global evolution of the cloud and to identify the engines of the cloud dynamics. In this first paper, the star formation activity is evaluated by surveying the distributions of dense cores and protostars, and their evolutionary state, as characterised using both infrared observations from the Herschel and WISE telescopes and molecular line observations with the IRAM 30-m telescope. We find ongoing star formation in the whole cloud, with a local peak in star formation activity around the centre of G202.3+2.5 where a chain of massive cores (10-50 Msun) forms a massive ridge (>150 Msun). All evolutionary stages from starless cores to Class II protostars are found in G202.3+2.5, including a possibly starless, large column density (8x10^{22} cm-2), and massive (52 Msun) core. All the core-scale observables examined in this paper point to an enhanced star formation activity centred on the junction between the three main branches of the ramified structure of G202.3+2.5. This suggests that the increased star-formation activity results from the convergence of these branches. To further investigate the origin of this enhancement, it is now necessary to extend the analysis to larger scales, in order to examine the relationship between cores, filaments and their environment. We address these points through the analysis of the dynamics of G202.3+2.5 in a joint paper.

We present the first release of the data and compact-source catalogue for the JCMT Large Program SCUBA-2 Continuum Observations of Pre-protostellar Evolution (SCOPE). SCOPE consists of 850-um continuum observations of 1235 Planck Galactic Cold Clumps (PGCCs) made with the Submillimetre Common-User Bolometer Array 2 on the James Clerk Maxwell Telescope. These data are at an angular resolution of 14.4 arcsec, significantly improving upon the 353-GHz resolution of Planck at 5 arcmin, and allowing for a catalogue of 3528 compact sources in 558 PGCCs. We find that the detected PGCCs have significant sub-structure, with 61 per cent of detected PGCCs having 3 or more compact sources, with filamentary structure also prevalent within the sample. A detection rate of 45 per cent is found across the survey, which is 95 per cent complete to Planck column densities of $N_{H_{2}}$ $>$ 5 $\times$ 10$^{21}$ cm$^{-2}$. By positionally associating the SCOPE compact sources with YSOs, the star formation efficiency, as measured by the ratio of luminosity to mass, in nearby clouds is found to be similar to that in the more distant Galactic Plane, with the column density distributions also indistinguishable from each other.

Context. Polarized dust emission can be used as a probe for magnetic fields at different scales. In particular, the analysis of the relative orientation between the density structures and the magnetic field projected on the plane of the sky can provide information on the role of magnetic fields in shaping the structure of molecular clouds. Aims. The relative orientation has been investigated using different methods. Our goal is to explicitly compare two of them: the Rolling Hough Transform (RHT) and the gradient technique. Methods. We have applied the RHT method and the gradient technique to two regions, identified in surface brightness maps at 353 GHz generated via MHD simulations post-processed using radiative transfer modelling. For both methods we have derived the relative orientation between the magnetic field and the density structures, to which we have applied two different statistics, the histogram of relative orientation (HRO) statistic and the projected Rayleigh statistic (PRS). Results. The samples of pixels selected by each method are substantially different. When the methods are applied to the same pixel selection, the results in terms of relative orientation as a function of column density are consistent between each other. When each method is applied to its own pixel selection, the differences are apparent. In Region 1, the RHT method roughly reproduces the observed trend of the relative orientation becoming more perpendicular for increasing column density, while the gradient method, applied at the same resolution as RHT, gives the opposite trend, with the relative orientation moving towards a more parallel alignment. In Region 2, the situation is reversed. The inconsistent results, which are due to the different pixel selections operated by the methods and to the intrinsic differences between them, provide complementary valuable information. Abridged.

The dust sub-millimetre polarisation of star-forming clouds carries information on dust and the role of magnetic fields in cloud evolution. With observations of a dense filamentary cloud G035.39-00.33, we aim to characterise the dust emission properties and the variations of the polarisation fraction. JCMT SCUBA-2/POL-2 data at 850um are combined with Planck 850um (353GHz) data to map polarisation fractions. With previous SCUBA-2 observations (450um and 850um) and Herschel data, the column densities are determined via modified blackbody fits and via radiative transfer modelling. Models are constructed to examine how the polarisation angles and fractions depend on potential magnetic field geometries and grain alignment. POL-2 data show clear changes in the magnetic field orientation. The filament has a peak column density of N(H2)~7 10^22 cm-2, a minimum dust temperature of T~12 K, and a mass of some 4300Msun for the area N(H2)> 5 10^21 cm-2. The estimated average value of the dust opacity spectral index is beta ~ 1.9. The ratio of sub-millimetre and J band optical depths is tau(250 um)/tau(J) ~ 2.5 10^-3, more than four times the typical values for diffuse medium. The polarisation fraction decreases as a function of column density to p ~ 1% in the central filament. Because of noise, the observed decrease of p(N) is significant only at N(H2)>2 10^22 cm-2. The observations suggest that the grain alignment is not constant. Although the data can be explained with a complete loss of alignment at densities above ~ 10^4 cm-3 or using the predictions of radiative torques alignment, the uncertainty of the field geometry and the spatial filtering of the SCUBA-2 data prevent strong conclusions. G035.39-00.33 shows strong signs of dust evolution and the low polarisation fraction is suggestive of a loss of polarised emission from its densest parts.

Magnetic field is one of the key agents that play a crucial role in shaping molecular clouds and regulating star formation, yet the complete information on the magnetic field is not well constrained due to the limitations in observations. We study the magnetic field in the massive infrared dark cloud G035.39-00.33 from dust continuum polarization observations at 850 $\micron$ with SCUBA-2/POL-2 at JCMT. The magnetic field tends to be perpendicular to the densest part of the main filament (F$_{M}$), whereas it has a less defined relative orientation in the rest of the structure, where it tends to be parallel to some diffuse regions. A mean plane-of-the-sky magnetic field strength of $\sim$50 $\mu$G for F$_{M}$ is obtained using Davis-Chandrasekhar-Fermi method. Based on $^{13}$CO (1-0) line observations, we suggest a formation scenario of F$_{M}$ due to large-scale ($\sim$10 pc) cloud-cloud collision. Using additional NH$_3$ line data, we estimate that F$_{M}$ will be gravitationally unstable if it is only supported by thermal pressure and turbulence. The northern part of F$_{M}$, however, can be stabilized by a modest additional support from the local magnetic field. The middle and southern parts of F$_{M}$ are likely unstable even if the magnetic field support is taken into account. We claim that the clumps in F$_{M}$ may be supported by turbulence and magnetic fields against gravitational collapse. Finally, we identified for the first time a massive ($\sim$200 M$_{\sun}$), collapsing starless clump candidate, "c8", in G035.39-00.33. The magnetic field surrounding "c8" is likely pinched, hinting at an accretion flow along the filament.

We examine the possibility of using near-infrared scattering to constrain the local radiation field and the dust properties, for example, the size distribution of the grains, and maximum grain size. We use radiative transfer modelling to examine the constraints provided by J, H, and K bands in combination with mid-infrared surface brightness at 3.6 $\mu$m. We use a spherical one-dimensional and elliptical three-dimensional cloud models to study the observable effects of different grain size distributions with varying absorption and scattering properties. As an example, we analyse observations of a molecular cloud in Taurus, TMC-1N. The observed surface brightness ratios between the bands change when the dust properties are changed. However, even a small change of 10% in the surface brightness of one channel changes the estimated powerlaw exponent of the size distribution $\gamma$ by up to ~30% and the estimated strength of the radiation field K_ISRF by up to ~60%. The maximum grain size A_max and $\gamma$ are always strongly anti-correlated. For example, overestimating the surface brightness by 10% changes the estimated radiation field strength by ~20% and the exponent of the size distribution by ~15%. The analysis of our synthetic observations indicates that the relative uncertainty of the parameter distributions are on average A_max, $\gamma$ ~25%, and the deviation between the estimated and correct values $\Delta$ Q <15%. We show that scattered infrared light can be used to derive meaningful limits for the dust parameters. However, errors in the surface brightness data can result in considerable uncertainties in the derived parameters.

The Galactic Cold Cores (GCC) project has made Herschel observations of interstellar clouds where Planck detected compact sources of cold dust emission. Our aim is to characterise the structure of the clumps and their parent clouds. We also examine the accuracy to which the structure of dense clumps can be determined from submillimetre data. We use standard statistical methods to characterise the GCC fields. Clumps are extracted using column density thresholding and we construct for each field a three-dimensional radiative transfer (RT) model. These are used to estimate the relative radiation field intensities, clump stability, and the uncertainty of column density estimates. We examine the radial column density profiles of the clumps. In the GCC fields, the structure noise follows the relations previously established at larger scales. The fractal dimension has no significant dependence on column density and the values D = 1.25 +- 0.07 are only slightly lower than in typical molecular clouds. The column density PDFs exhibit large variations, e.g. in the case of externally compressed clouds. At scales r>0.1 pc, the radial column density distributions of the clouds follow an average relation of N~r^{-1}. In spite of a great variety of clump morphology, clumps tend to follow a similar N~r^{-1} relation below r~0.1 pc. RT calculations indicate only factor of 2.5 variation in the local radiation field intensity. The fraction of gravitationally bound clumps increases significantly in regions with A_V > 5 mag but most bound objects appear to be pressure-confined. The GCC host clouds have statistical properties similar to general molecular clouds. The gravitational stability, peak column density, and clump orientation are connected to the cloud background while most other statistics (e.g. D and radial profiles) are insensitive to the environment.

Analysis of all-sky Planck submillimetre observations and the IRAS 100um data has led to the detection of a population of Galactic cold clumps. The clumps can be used to study star formation and dust properties in a wide range of Galactic environments. Our aim is to measure dust spectral energy distribution (SED) variations as a function of the spatial scale and the wavelength. We examine the SEDs at large scales using IRAS, Planck, and Herschel data. At smaller scales, we compare with JCMT/SCUBA-2 850um maps with Herschel data that are filtered using the SCUBA-2 pipeline. Clumps are extracted using the Fellwalker method and their spectra are modelled as modified blackbody functions. According to IRAS and Planck data, most fields have dust colour temperatures T_C ~ 14-18K and opacity spectral index values of beta=1.5-1.9. The clumps/cores identified in SCUBA-2 maps have T~ 13K and similar beta values. There are some indications of the dust emission spectrum becoming flatter at wavelengths longer than 500um. In fits involving Planck data, the significance is limited by the uncertainty of the corrections for CO line contamination. The fits to the SPIRE data give a median beta value slightly above 1.8. In the joint SPIRE and SCUBA-2 850um fits the value decreases to beta ~1.6. Most of the observed T-beta anticorrelation can be explained by noise. The typical submillimetre opacity spectral index beta of cold clumps is found to be ~1.7. This is above the values of diffuse clouds but lower than in some previous studies of dense clumps. There is only tentative evidence of T-beta anticorrelation and beta decreasing at millimetre wavelengths.

The combination of line and continuum observations can provide vital insights to the formation and fragmentation of filaments and the initial conditions for star formation. We have carried out line observations to map the kinematics of an evolved, actively star forming filament G82.65-2.00. The filament was first The combination of line and continuum observations can provide vital insights to the formation and fragmentation of filaments and the initial conditions for star formation. We have carried out line observations to map the kinematics of an evolved, actively star forming filament G82.65-2.00. The filament was first identified from the Planck data as a region of particularly cold dust emission and was mapped at 100-500 $\mu$m as a part of Herschel key program Galactic Cold Cores. The observations reveal several velocity components in the field, with strongest line emission concentrated to velocity range $\sim [3,5]$ km $\rm s^{-1}$. The column density of molecular hydrogen along the filament varies from 1.0 to 2.3 $\times 10^{22}$ $\rm cm^{2}$. We have examined six cold clumps from the central part of the filament. The clumps have masses in the range $10 - 20$ $M_{\odot}$ ($\sim70M_{\odot}$ in total) and are close to or above the virial mass. Furthermore, the main filament is heavily fragmented and most of the the substructures have a mass lower than or close to the virial mass, suggesting that the filament is dispersing as a whole. Position-velocity maps of $\rm ^{12}CO$ and $\rm ^{13}CO$ lines indicate that at least one of the striations is kinematically connected to two of the clumps, potentially indicating mass accretion from the striation onto the main filament. We tentatively estimate the accretion rate to be $\dot{M}$ = $2.23 \times 10^{-6}$ $ M_{\odot} / \rm year$.

Filaments are key for star formation models. As part of the study carried out by the Herschel GCC Programme, here we study the filament properties presented in GCC.VII in context with theoretical models of filament formation and evolution. A conservative sample of filaments at a distance D<500pc was extracted with the Getfilaments algorithm. Their physical structure was quantified according to two main components: the central (Gaussian) region (core component), and the power-law like region dominating the filament column density profile at larger radii (wing component). The properties and behaviour of these components relative to the total linear mass density of the filament and its environmental column density were compared with theoretical models describing the evolution of filaments under gravity-dominated conditions. The feasibility of a transition to supercritical state by accretion is dependent on the combined effect of filament intrinsic properties and environmental conditions. Reasonably self-gravitating (high Mline-core) filaments in dense environments (av\sim3mag) can become supercritical in timescales of t\sim1Myr by accreting mass at constant or decreasing width. The trend of increasing Mline-tot (Mline-core and Mline-wing), and ridge Av with background also indicates that the precursors of star-forming filaments evolve coevally with their environment. The simultaneous increase of environment and filament Av explains the association between dense environments and high Mline-core values, and argues against filaments remaining in constant single-pressure equilibrium states. The simultaneous growth of filament and background in locations with efficient mass assembly, predicted in numerical models of collapsing clouds, presents a suitable scenario for the fulfillment of the combined filament mass-environment criterium that is in quantitative agreement with Herschel observations.

The nearby cloud L1642 is one of only two known very high latitude (|b| > 30 deg) clouds actively forming stars. It is a rare example of star formation in isolated conditions, and can reveal important details of star formation in general, e.g., of the effect of magnetic fields. We compare Herschel dust emission structures and magnetic field orientation revealed by Planck polarization maps in L1642. The high-resolution ($\sim20"$) Herschel data reveal a complex structure including a dense, compressed central clump, and low density striations. The Planck polarization data (at 10$'$ resolution) reveal an ordered magnetic field pervading the cloud and aligned with the surrounding striations. There is a complex interplay between the cloud structure and large scale magnetic field. This suggests that the magnetic field is closely linked to the formation and evolution of the cloud. CO rotational emission confirms that the striations are connected with the main clumps and likely to contain material either falling into or flowing out of the clumps. There is a clear transition from aligned to perpendicular structures approximately at a column density of $N_{\rm{H}} = 1.6 \times 10^{21}\, {{\rm cm}}^{-2}$. Comparing the Herschel maps with the Planck polarization maps shows the close connection between the magnetic field and cloud structure even in the finest details of the cloud.

The association of filaments with protostellar objects has made these structures a priority target in star formation studies. The datasets of the Herschel Galactic Cold Cores Key Programme allow for a statistical study of filaments with a wide range of intrinsic and environmental characteristics. Characterisation of this sample can be used to identify key physical parameters and quantify the role of environment in the formation of supercritical filaments. Filaments were extracted from fields at D<500pc with the getfilaments algorithm and characterised according to their column density profiles and intrinsic properties. Each profile was fitted with a beam-convolved Plummer-like function and quantified based on the relative contributions from the filament 'core', represented by a Gaussian, and 'wing' component, dominated by the power-law of the Plummer-like function. These parameters were examined for populations associated with different background levels. We find that filaments increase their core (Mcore) and wing (Mwing) contributions while increasing their total linear mass density (Mtot). Both components appear to be linked to the local environment, with filaments in higher backgrounds having systematically more massive Mcore and Mwing. This dependence on the environment supports an accretion-based model for filament evolution in the local neighbourhood (D<500pc). Structures located in the highest backgrounds develop the highest central Av, Mcore, and Mwing as Mtot increases with time, favoured by the local availability of material and the enhanced gravitational potential. Our results indicate that filaments acquiring a significantly massive central region with Mcore>Mcrit/2 may become supercritical and form stars. This translates into a need for filaments to become at least moderately self-gravitating in order to undergo localised star formation or become star-forming filaments.

The Galactic Cold Cores project has made Herschel observations of 116 fields where the Planck survey has found signs of cold dust emission. The fields contain sources in different environments and different phases of star formation. The dust opacity spectral index beta and the dust colour temperature T are derived using Herschel and Planck data. The relation between beta and T is examined for the whole sample and inside individual fields. Based on IRAS and Planck data, the fields are characterised by a median colour temperature of 16.1 K and a median opacity spectral index of beta=1.84. We observe a clear T-beta anti-correlation. In Herschel observations, constrained at lower resolution by Planck data, the variations follow the column density structure and beta(FIR) can rise to ~2.2 in individual clumps. The Planck 217 GHz band shows a systematic excess that is consistent with a general flattening of the dust emission spectrum at millimetre wavelengths. When fitted separately below and above 700 um, the median spectral index values are beta(FIR) ~ 1.91 and beta(mm) ~ 1.66. The spectral index changes as a function of column density and wavelength. Beta variations are partly masked by temperature gradients and the changes in the intrinsic grain properties may be even greater.

Context. he study of prestellar cores is essential to understanding the initial stages of star formation. With $Herschel$ more cold clumps have been detected than ever before. For this study we have selected 21 cold clumps from 20 $Herschel$ fields observed as a follow-up on original $Planck$ detections. We have observed these clumps in $^{13}$CO (1-0), C$^{18}$O (1-0), and N$_2$H$^+$ (1-0) lines. Aims. Our aim is to find out if these cold clumps are prestellar. We have examined to what extent independent analysis of the dust and the molecular lines lead to similar conclusions about the masses of these objects. Methods. We calculate the clump masses and densities from the dust continuum and molecular line observations and compare these to each other and to the virial and Bonnor-Ebert masses calculated for each clump. Finally we examine two of the fields with radiative transfer models to estimate CO abundances. Results. When excitation temperatures could be estimated, the column densities derived from molecular line observations were comparable to those from dust continuum data. The median column density estimates are 4.2$\times 10^{21}$cm$^{-2}$ and 5.5$\times 10^{21}$cm$^{-2}$ for the line and dust emission data, respectively. The calculated abundances, column densities, volume densities, and masses all have large uncertainties and one must be careful when drawing conclusions. Abundance of $^{13}$CO was found in modeling the two clumps in the field G131.65$+$9.75 to be close to the usual value of 10$^{-6}$. The abundance ratio of $^{13}$CO and C$^{18}$O was $\sim$10. Molecular abundances could only be estimated with modeling, relying on dust column density data. Conclusions. The results indicate that most cold clumps, even those with dust color temperatures close to 11 K, are not necessarily prestellar.

The project Galactic Cold Cores has made Herschel observations of interstellar clouds where the Planck satellite survey has located cold and compact clumps. The sources range from starless clumps to protostellar cores. We examine 116 Herschel fields to estimate the submillimetre dust opacity and its variations. The submillimetre dust opacity was derived from Herschel data, and near-infrared observations of the reddening of background stars are converted into near-infrared optical depth. We studied the systematic errors affecting these parameters and used modelling to correct for the expected biases. The ratio of 250um and J band opacities is correlated with the cloud location and star formation activity. We find a median ratio of tau(250um)/tau(J)= (1.6+-0.2)*10^-3, which is more than three times the mean value in diffuse medium. Assuming a spectral index beta=1.8 instead of beta=2.0, the value would be lower by ~30%. No significant systematic variation is detected with Galactocentric distance or with Galactic height. The tau(250um)/tau(J) maps reveal six fields with clear increase of submillimetre opacity of up to tau(250um)/tau(J) ~ 4*10^-3. These are all nearby fields with spatially resolved clumps of high column density. We interpret the increase in the far-infrared opacity as a sign of grain growth in the densest and coldest regions of interstellar clouds.

L1642 is one of the two high galactic latitude (|b| > 30deg) clouds confirmed to have active star formation. We examine the properties of this cloud, especially the large-scale structure, dust properties, and compact sources in different stages of star formation. We present high-resolution far-infrared and submm observations with the Herschel and AKARI satellites and mm observations with the AzTEC/ASTE telescope, which we combined with archive data from near- and mid-infrared (2MASS, WISE) to mm observations (Planck). The Herschel observations, combined with other data, show a sequence of objects from a cold clump to young stellar objects at different evolutionary stages. Source B-3 (2MASS J04351455-1414468) appears to be a YSO forming inside the L1642 cloud, instead of a foreground brown dwarf, as previously classified. Herschel data reveal striation in the diffuse dust emission around L1642. The western region shows striation towards NE and has a steeper column density gradient on its southern side. The densest central region has a bow-shock like structure showing compression from the west and a filamentary tail extending towards east. The differences suggest that these may be spatially distinct structures, aligned only in projection. We derive values of the dust emission cross-section per H nucleon for different regions of the cloud. Modified black-body fits to the spectral energy distribution of Herschel and Planck data give emissivity spectral index beta values 1.8-2.0 for the different regions. The compact sources have lower beta values and show an anticorrelation between T and beta. Markov chain Monte Carlo calculations demonstrate the strong anticorrelation between beta and T errors and the importance of mm Planck data in constraining the estimates. L1642 reveals a more complex structure and sequence of star formation than previously known.

Mapping of near-infrared (NIR) scattered light is a recent method for the study of interstellar clouds, complementing other, more commonly used methods, like dust emission and extinction. Our goal is to study the usability of this method on larger scale, and compare the properties of a filament using NIR scattering and other methods. We also study the radiation field and differences in grain emissivity between diffuse and dense areas. We have used scattered J, H, and K band surface brightness WFCAM-observations to map filament TMC-1N in Taurus, covering an area of 1dx1d corresponding to ~(2.44 pc)^2. We have converted the data into optical depth and compared the results with NIR extinction and Herschel observations of submm dust emission. We see the filament in scattered light in all three NIR bands. We note that our WFCAM observations in TMC-1N show notably lower intensity than previous results in Corona Australis using the same method. We show that 3D radiative transfer simulations predict similar scattered surface brightness levels as seen in the observations. However, changing the assumptions about the background can change the results of simulations notably. We derive emissivity by using optical depth in the J band as an independent tracer of column density. We obtain opacity sigma(250um) values 1.7-2.4x10^-25 cm^2/H, depending on assumptions of the extinction curve, which can change the results by over 40%. These values are twice as high as obtained for diffuse areas, at the lower limit of earlier results for denser areas. We show that NIR scattering can be a valuable tool in making high resolution maps. We conclude, however, that NIR scattering observations can be complicated, as the data can show relatively low-level artefacts. This suggests caution when planning and interpreting the observations.

Sub-millimetre dust emission is often used to derive the column density N of dense interstellar clouds. The observations consist of data at several wavelengths but of variable resolution. We examine two procedures that been proposed for the estimation of high resolution N maps. Method A uses a low-resolution temperature map combined with higher resolution intensity data while Method B combines N estimates from different wavelength ranges. Our aim is to determine the accuracy of the methods relative to the true column densities and the estimates obtainable with radiative transfer modelling. We use magnetohydrodynamical (MHD) simulations and radiative transfer calculations to simulate sub-millimetre observations at the wavelengths of the Herschel Space Observatory. The observations are analysed with the methods and the results compared to the true values and to the results from radiative transfer modelling of observations. Both methods A and B give relatively reliable column density estimates at the resolution of 250um data while also making use of the longer wavelengths. For high signal-to-noise data, the results of Method B are better correlated with the true column density, while Method A is less sensitive to noise. When the cloud has internal heating, results of Method B are consistent with those that would be obtained with high-resolution data. Because of line-of-sight temperature variations, these underestimate the true column density and, because of a favourable cancellation of errors, Method A can sometimes give more correct values. Radiative transfer modelling, even with very simple 3D cloud models, can provide better results. However, the complexity of the models required for improvements increases rapidly with the complexity and opacity of the clouds.

Sub-millimetre observations suggest that the filaments of interstellar clouds have rather uniform widths and can be described with the so-called Plummer profiles. The shapes of the filament profiles are linked to their physical state. Before drawing conclusions on the observed column density profiles, we must evaluate the observational uncertainties. We want to estimate the bias that could result from radiative transfer effects or from variations of submm dust emissivity. We use cloud models obtained with magnetohydrodynamic simulations and carry out radiative transfer calculations to produce maps of sub-millimetre emission. Column densities are estimated based on the synthetic observations. For selected filaments, the estimated profiles are compared to those derived from the original column density. Possible effects from spatial variations of dust properties are examined. With instrumental noise typical of the Herschel observations, the parameters derived for nearby clouds are correct to within a few percent. The radiative transfer effects have only a minor effect on the results. If the signal-to-noise ratio is degraded by a factor of four, the errors become significant and for half of the examined filaments the values cannot be constrained. The errors increase in proportion to the cloud distance. Assuming the resolution of Herschel instruments, the model filaments are barely resolved at a distance of ~400 pc and the errors in the parameters of the Plummer function are several tens of per cent. The Plummer parameters, in particular the power-law exponent p, are sensitive to noise but can be determined with good accuracy using Herschel data. One must be cautious about possible line-of-sight confusion. In our models, a large fraction of the filaments seen in the column density maps are not continuous structures in three dimensions.

Interstellar filaments are an important part of star formation. To understand the structure of filaments, cross-section profiles are often fitted with Plummer profiles. This profiling is often done with submm studies, such as Herschel. It would be convenient if filament properties could also be studied using groundbased NIR data. We compare the filament profiles obtained by NIR extinction and submm observations to find out if reliable profiles can be derived using NIR data. We use J-, H-, and K-band data of a filament north of TMC-1 to derive an extinction map from colour excesses of background stars. We compare the Plummer profiles obtained from extinction maps with Herschel dust emission maps. We present 2 methods to estimate profiles from NIR: Plummer profile fits to median Av of stars or directly to the Av of individual stars. We compare the methods by simulations. In simulations extinction maps and the new methods give correct results to within ~10-20 for modest densities. Direct fit to data on individual stars gives more accurate results than extinction map, and can work in higher density. In profile fits to real observations, values of Plummer parameters are generally similar to within a factor of ~2. Although parameter values can vary significantly, estimates of filament mass usually remain accurate to within some tens of per cent. Our results for TMC-1 are in agreement with earlier results. High resolution NIR data give more details, but 2MASS data can be used to estimate profiles. NIR extinction can be used as an alternative to submm observations to profile filaments. Direct fits of stars can also be a valuable tool. Plummer profile parameters are not always well constrained, and caution should be taken when making fits. In the evaluation of Plummer parameters, one can use the independence of dust emission and NIR data and the difference in the shapes of the confidence regions.

With Planck and Herschel, we now have the spectral coverage and angular resolution required to observe dense and cold molecular clouds. As these clouds are optically thick at short wavelength but optically thin at long wavelength, it is tricky to conclude anything about dust properties without a proper treatment of the radiative transfer (RT). Our aim is to disentangle the effects of RT and of dust properties on the variations in the dust emission to provide observers with keys to analyse the emission arising from dense clouds. We model cylindrical clouds, illuminated by the ISRF, and carry out full RT calculations. Dust temperatures are solved using DustEM for amorphous carbons and silicates, grains coated with carbon mantles, and mixed aggregates of carbon and silicate. We allow variations of the grain optical properties with wavelength and temperature. We determine observed colour temperatures, T, and emissivity spectral indices, beta, by fitting the dust emission with modified blackbodies, to compare our models with observations. RT effects can neither explain the low T nor the increased submm emissivity measured at the centre of dense clouds, nor the observed beta-T anti-correlation. Adding noise to the modelled data, we show that it is not likely to be the unique explanation for the beta-T anti-correlation observed in starless clouds. It may be explained by intrinsic variations in the grain optical properties with temperature. As for the increased submm emissivity and the low T, they have to originate in variations in the grain optical properties, probably caused by their growth to form porous aggregates. We find it difficult to track back the nature of grains from the spectral variations in their emission. Finally, the column density is underestimated when determined with blackbody fitting because of the discrepancy between T and the true dust temperature at the cloud centre.

We examine the cloud structure around the Planck detections in 71 fields observed with the Herschel SPIRE instrument. We wish to determine the general physical characteristics of the fields and to examine the morphology of the clouds where the cold high column density clumps are found. We derive colour temperature and column density maps of the fields. We examine the infrared spectral energy distributions of the main clumps. The clouds are categorised according to their large scale morphology. With the help of recently released WISE satellite data, we look for signs of enhanced mid-infrared scattering (coreshine), an indication of growth of the dust grains, and examine the star formation activity associated with the cold clumps. The mapped clouds have distances ranging from ~100pc to several kiloparsecs and cover a range of sizes and masses from cores of less than 10 solar masses to clouds with masses in excess of 10000 solar mass. Most fields contain some filamentary structures and in about half of the cases a filament or a few filaments dominate the morphology. In one case out of ten, the clouds show a cometary shape or have sharp boundaries indicative of compression by an external force. The width of the filaments is typically ~0.2-0.3pc. However, there is significant variation from 0.1pc to 1pc and the estimates are sensitive to the methods used and the very definition of a filament. Enhanced mid-infrared scattering, coreshine, was detected in four clouds with six additional tentative detections. The cloud LDN183 is included in our sample and remains the best example of this phenomenon. About half of the fields are associated with active star formation as indicated by the presence of mid-infrared point sources. The mid-infrared sources often coincide with structures whose sub-millimetre spectra are still dominated by the cold dust.

We study the reliability of mass estimates obtained for molecular cloud cores using sub-millimetre and infrared dust emission. We use magnetohydrodynamic simulations and radiative transfer to produce synthetic observations with spatial resolution and noise levels typical of Herschel surveys. We estimate dust colour temperatures using different pairs of intensities, calculate column densities and compare the estimated masses with the true values. We compare these results to the case when all five Herschel wavelengths are available. We investigate the effects of spatial variations of dust properties and the influence of embedded heating sources. Wrong assumptions of dust opacity and its spectral index beta can cause significant systematic errors in mass estimates. These are mainly multiplicative and leave the slope of the mass spectrum intact, unless cores with very high optical depth are included. Temperature variations bias colour temperature estimates and, in quiescent cores with optical depths higher than for normal stable cores, masses can be underestimated by up to one order of magnitude. When heated by internal radiation sources the observations recover the true mass spectra. The shape, although not the position, of the mass spectrum is reliable against observational errors and biases introduced in the analysis. This changes only if the cores have optical depths much higher than expected for basic hydrostatic equilibrium conditions. Observations underestimate the value of beta whenever there are temperature variations along the line of sight. A bias can also be observed when the true beta varies with wavelength. Internal heating sources produce an inverse correlation between colour temperature and beta that may be difficult to separate from any intrinsic beta(T) relation of the dust grains. This suggests caution when interpreting the observed mass spectra and the spectral indices.

Within the project Galactic Cold Cores we are carrying out Herschel photometric observations of cold interstellar clouds detected with the Planck satellite. The three fields observed as part of the Herschel science demonstration phase (SDP) provided the first glimpse into the nature of these sources. We examine the properties of the dust emission within the fields. We determine the dust sub-millimetre opacity, look for signs of spatial variations in the dust spectral index, and estimate how the apparent variations of the parameters could be affected by different sources of uncertainty. We use the Herschel observations where the zero point of the surface brightness scale is set with the help of the Planck satellite data. We derive the colour temperature and column density maps of the regions and determine the dust opacity by a comparison with extinction measurements. By simultaneously fitting the colour temperature and the dust spectral index values we look for spatial variations in the apparent dust properties. With a simple radiative transfer model we estimate to what extent these can be explained by line-of-sight temperature variations, without changes in the dust grain properties. The analysis of the dust emission reveals cold and dense clouds that coincide with the Planck sources and confirm those detections. The derived dust opacity varies in the range kappa(250um) ~ 0.05-0.2 cm^2/g, higher values being observed preferentially in regions of high column density. The average dust spectral index beta is ~ 1.9-2.2. There are indications that beta increases towards the coldest regions. The spectral index decreases strongly near internal heating sources but, according to radiative transfer models, this can be explained by the line-of-sight temperature variations without a change in the dust properties.

(abridged) We perform a detailed investigation of sources from the Cold Cores Catalogue of Planck Objects (C3PO). Our goal is to probe the reliability of the detections, validate the separation between warm and cold dust emission components, provide the first glimpse at the nature, internal morphology and physical characterictics of the Planck-detected sources. We focus on a sub-sample of ten sources from the C3PO list, selected to sample different environments, from high latitude cirrus to nearby (150pc) and remote (2kpc) molecular complexes. We present Planck surface brightness maps and derive the dust temperature, emissivity spectral index, and column densities of the fields. With the help of higher resolution Herschel and AKARI continuum observations and molecular line data, we investigate the morphology of the sources and the properties of the substructures at scales below the Planck beam size.