We provide a set of stellar evolution and nucleosynthesis calculations that applies established physics assumptions simultaneously to low- and intermediate-mass and massive star models. Our goal is to provide an internally consistent and comprehensive nuclear production and yield data base for applications in areas such as pre-solar grain studies. Our non-rotating models assume convective boundary mixing where it has been adopted before. We include 8 (12) initial masses for $Z = 0.01$ ($0.02$). Models are followed either until the end of the asymptotic giant branch phase or the end of Si burning, complemented by a simple analytic core-collapse supernova models with two options for fallback and shock velocities. The explosions show which pre-supernova yields will most strongly be effected by the explosive nucleosynthesis. We discuss how these two explosion parameters impacts the light elements and the $s$ and $p$ process. For low- and intermediate-mass models our stellar yields from H to Bi include the effect of convective boundary mixing at the He-intershell boundaries and the stellar evolution feedback of the mixing process that produces the $^{13}$C pocket. All post-processing nucleosynthesis calculations use the same nuclear reaction rate network and nuclear physics input. We provide a discussion of the nuclear production across the entire mass range organized by element group. All our stellar nucleosynthesis profile and time evolution output is available electronically, and tools to explore the data on the NuGrid VOspace hosted by the Canadian Astronomical Data Centre are introduced.

Measurements of explosive nucleosynthesis yields in core-collapse supernovae provide tests for explosion models. We investigate constraints on explosive conditions derivable from measured amounts of nickel and iron after radioactive decays using nucleosynthesis networks with parameterized thermodynamic trajectories. The Ni/Fe ratio is for most regimes dominated by the production ratio of 58Ni/(54Fe + 56Ni), which tends to grow with higher neutron excess and with higher entropy. For SN 2012ec, a supernova that produced a Ni/Fe ratio of $3.4\pm1.2$ times solar, we find that burning of a fuel with neutron excess $\eta \approx 6\times 10^{-3}$ is required. Unless the progenitor metallicity is over 5 times solar, the only layer in the progenitor with such a neutron excess is the silicon shell. Supernovae producing large amounts of stable nickel thus suggest that this deep-lying layer can be, at least partially, ejected in the explosion. We find that common spherically symmetric models of $M_{\rm ZAMS} \lesssim 13$ Msun stars exploding with a delay time of less than one second ($M_{\rm cut} < 1.5$ Msun) are able to achieve such silicon-shell ejection. Supernovae that produce solar or sub-solar Ni/Fe ratios, such as SN 1987A, must instead have burnt and ejected only oxygen-shell material, which allows a lower limit to the mass cut to be set. Finally, we find that the extreme Ni/Fe value of 60-75 times solar derived for the Crab cannot be reproduced by any realistic-entropy burning outside the iron core, and neutrino-neutronization obtained in electron-capture models remains the only viable explanation.

We revisit the evidence for the contribution of the long-lived radioactive nuclides 44Ti, 55Fe, 56Co, 57Co, and 60Co to the UVOIR light curve of SN 1987A. We show that the V-band luminosity constitutes a roughly constant fraction of the bolometric luminosity between 900 and 1900 days, and we obtain an approximate bolometric light curve out to 4334 days by scaling the late time V-band data by a constant factor where no bolometric light curve data is available. Considering the five most relevant decay chains starting at 44Ti, 55Co, 56Ni, 57Ni, and 60Co, we perform a least squares fit to the constructed composite bolometric light curve. For the nickel isotopes, we obtain best fit values of M(56Ni) = (7.1 +- 0.3) x 10^{-2} Msun and M(57Ni) = (4.1 +- 1.8) x 10^{-3} Msun. Our best fit 44Ti mass is M(44Ti) = (0.55 +- 0.17) x 10^{-4} Msun, which is in disagreement with the much higher (3.1 +- 0.8) x 10^{-4} Msun recently derived from INTEGRAL observations. The associated uncertainties far exceed the best fit values for 55Co and 60Co and, as a result, we only give upper limits on the production masses of M(55Co) < 7.2 x 10^{-3} Msun and M(60Co) < 1.7 x 10^{-4} Msun. Furthermore, we find that the leptonic channels in the decay of 57Co (internal conversion and Auger electrons) are a significant contribution and constitute up to 15.5% of the total luminosity. Consideration of the kinetic energy of these electrons is essential in lowering our best fit nickel isotope production ratio to [57Ni/56Ni]=2.5+-1.1, which is still somewhat high but is in agreement with gamma-ray observations and model predictions.

We explore the nucleosynthesis trends from two mechanisms during freeze-out expansions in core-collapse supernovae. The first mechanism is related to the convection and instabilities within homogeneous stellar progenitor matter that is accreted through the supernova shock. The second mechanism is related to the impact of the supersonic wind termination shock (reverse shock) within the tumultuous inner regions of the ejecta above the proto-neutron star. Our results suggest that isotopes in the mass range 12<=A<=122 that are produced during the freeze-out expansions may be classified in two families. The isotopes of the first family manifest a common mass fraction evolutionary profile, whose specific shape per isotope depends on the characteristic transition between two equilibrium states (equilibrium state transition) during each type of freeze-out expansion. The first family includes the majority of isotopes in this mass range. The second family is limited to magic nuclei and isotopes in their locality, which do not sustain any transition, become nuclear flow hubs, and dominate the final composition. We use exponential and power-law adiabatic profiles to identify dynamic large-scale and small-scale equilibrium patterns among nuclear reactions. (truncated abstract) In addition, we introduce non-monotonic parameterized profiles to probe the impact of the reverse shock and multi-dimensional explosion asymmetries on nucleosynthesis. Cases are shown in which the non-monotonic profiles favor the production of radioactivities. Non-monotonic freeze-out profiles involve longer non-equilibrium nucleosynthesis intervals compared with the exponential and power-law profiles, resulting in mass fraction trends and yield distributions that may not be achieved by the monotonic freeze-out profiles.

We compare the yields of Ti44 and Ni56 produced from post-processing the thermodynamic trajectories from three different core-collapse models -- a Cassiopeia A progenitor, a double shock hypernova progenitor, and a rotating 2D explosion -- with the yields from exponential and power-law trajectories. The peak temperatures and densities achieved in these core-collapse models span several of the distinct nucleosynthesis regions we identify, resulting in different trends in the Ti44 and Ni56 yields for different mass elements. The Ti44 and Ni56 mass fraction profiles from the exponential and power-law profiles generally explain the tendencies of the post-processed yields, depending on which regions are traversed by the model. We find integrated yields of Ti44 and Ni56 from the exponential and power-law trajectories are generally within a factor 2 or less of the post-process yields. We also analyze the influence of specific nuclear reactions on the Ti44 and Ni56 abundance evolution. Reactions that affect all yields globally are the 3a, p(e-,nu)n and n(e+,nubar)p. The rest of the reactions are ranked according to their degree of impact on the synthesis of Ti44. The primary ones include Ti44(a,p)V47, Ca40(a,g)Ti44, V45(p,g)Cr46, Ca40(a,p)Sc43, F17(a,p)Ne20, Na21(a,p)Mg24, Sc41(p,g)Ti42, Sc43(p,g)Ti44, Ti44(p,g)V45, and Ni57(p,g)Cu58, along with numerous weak reactions. Our analysis suggests that not all Ti44 need be produced in an a-rich freeze-out in core-collapse events, and that reaction rate equilibria in combination with timescale effects for the expansion profile may account for the paucity of Ti44 observed in supernovae remnants.

The slow neutron capture process in massive stars (the weak s-process) produces most of the s-only isotopes in the mass region 60 < A < 90. The nuclear reaction rates used in simulations of this process have a profound effect on the final s-process yields. We generated 1D stellar models of a 25 solar mass star varying the 12C + 12C rate by a factor of 10 and calculated full nucleosynthesis using the post-processing code PPN. Increasing or decreasing the rate by a factor of 10 affects the convective history and nucleosynthesis, and consequently the final yields.

The s-process production in massive stars at very low metallicities is expected to be negligible due to the low abundance of the neutron source 22Ne, to primary neutron poisons and decreasing iron seed abundances. However, recent models of massive stars including the effects of rotation show that a strong production of 22Ne is possible in the helium core, as a consequence of the primary nitrogen production (observed in halo metal poor stars). Using the PPN post-processing code, we studied the impact of this primary 22Ne on the s process. We find a large production of s elements between strontium and barium, starting with the amount of primary 22Ne predicted by stellar models. There are several key reaction rate uncertainties influencing the s-process efficiency. Among them, 17O(alpha,gamma) may play a crucial role strongly influencing the s process efficiency, or it may play a negligible role, according to the rate used in the calculations. We also report on the development of a new parallel (MPI) post-processing code (MPPNP) designed to follow the complete nucleosynthesis in stars on highly resolved grids. We present here the first post-processing run from the ZAMS up to the end of helium burning for a 15 solar mass model.

Many nucleosynthesis and mixing processes of low-mass stars as they evolve from the Main Sequence to the thermal-pulse Asymptotic Giant Branch phase (TP-AGB) are well understood (although of course important physics components, e.g. rotation, magnetic fields, gravity wave mixing, remain poorly known). Nevertheless, in the last years presolar grain measurements with high resolution have presented new puzzling problems and strong constraints on nucleosynthesis processes in stars. The goal of the NuGrid collaboration is to present uniform yields for a large range of masses and metallicities, including low$-$mass stars and massive stars and their explosions. Here we present the first calculations of stellar evolution and high-resolution, post-processing simulations of an AGB star with an initial mass of 2 M_sun and solar-like metallicity (Z=0.01), based on the post-processing code PPN. In particular, we analyze the formation and evolution of the radiative 13C-pocket between the 17th TP and the 18th TP. The s-process nucleosynthesis profile of a sample of heavy isotopes is also discussed, before the next convective TP occurrence.

We examine observed heavy element abundances in the Cassiopeia A supernova remnant as a constraint on the nature of the Cas A supernova. We compare bulk abundances from 1D and 3D explosion models and spatial distribution of elements in 3D models with those derived from X-ray observations. We also examine the cospatial production of 26Al with other species. We find that the most reliable indicator of the presence of 26Al in unmixed ejecta is a very low S/Si ratio (~0.05). Production of N in O/S/Si-rich regions is also indicative. The biologically important element P is produced at its highest abundance in the same regions. Proxies should be detectable in supernova ejecta with high spatial resolution multiwavelength observations.

We present preliminary results from recent high-resolution double-degenerate merger simulations with the Smooth Particle Hydrodynamics (SPH) technique. We put particular emphasis on verification and validation in our effort and show the importance of details in the initial condition setup for the final outcome of the simulation. We also stress the dynamical importance of including shocks in the simulations. These results represent a first step toward a suite of simulations that will shed light on the question whether double-degenerate mergers are a viable path toward type 1a supernovae. In future simulations, we will make use of the capabilities of the NuGrid collaboration in post-processing SPH particle trajectories with a complete nuclear network to follow the detailed nuclear reactions during the dynamic merger phase.

We review some of the uncertainties in calculating nucleosynthetic yields, focusing on the explosion mechanism. Current yield calculations tend to either use a piston, energy injection, or enhancement of neutrino opacities to drive an explosion. We show that the energy injection, or more accurately, an entropy injection mechanism is best-suited to mimic our current understanding of the convection-enhanced supernova engine. The enhanced neutrino-opacity technique is in qualitative disagreement with simulations of core-collapse supernovae and will likely produce errors in the yields. But piston-driven explosions are the most discrepant. Piston-driven explosion severely underestimate the amount of fallback, leading to order-of-magnitude errors in the yields of heavy elements. To obtain yields accurate to the factor of a few level, we must use entropy or energy injection and this has become the NuGrid collaboration approach.

The "collapsar" engine for gamma-ray bursts invokes as its energy source the failure of a normal supernova and the formation of a black hole. Here we present the results of the first three-dimensional simulation of the collapse of a massive star down to a black hole, including the subsequent accretion and explosion. The explosion differs significantly from the axisymmetric scenario obtained in two-dimensional simulations; this has important consequences for the nucleosynthetic yields. We compare the nucleosynthetic yields to those of hypernovae. Calculating yields from three-dimensional explosions requires new strategies in post-process nucleosynthesis; we discuss NuGrid's plan for three-dimensional yields.

We investigate the physical conditions where 44Ti and 56Ni are created in core-collapse supernovae. In this preliminary work we use a series of post-processing network calculations with parametrized expansion profiles that are representative of the wide range of temperatures, densities and electron-to-baryon ratios found in 3D supernova simulations. Critical flows that affect the final yields of 44Ti and 56Ni are assessed.

Simulations of nucleosynthesis in astrophysical environments are at the intersection of nuclear physics reaction rate research and astrophysical applications, for example in the area of galactic chemical evolution or near-field cosmology. Unfortunately, at present the available yields for such applications are based on heterogeneous assumptions between the various contributing nuclear production sites, both in terms of modeling the thermodynamic environment itself as well as the choice of specifc nuclear reaction rates and compilations. On the other side, new nuclear reaction rate determinations are often taking a long time to be included in astrophysical applications. The NuGrid project addresses these issues by providing a set of codes and a framework in which these codes interact. In this contribution we describe the motivation, goals and first results of the NuGrid project. At the core is a new and evolving post-processing nuclesoynthesis code (PPN) that can follow quiescent and explosive nucleosynthesis following multi-zone 1D-stellar evolution as well as multi-zone hydrodynamic input, including explosions. First results are available in the areas of AGB and massive stars.

The nucleosynthetic yield from a supernova explosion depends upon a variety of effects: progenitor evolution, explosion process, details of the nuclear network, and nuclear rates. Especially in studies of integrated stellar yields, simplifications reduce these uncertainties. But nature is much more complex, and to actually study nuclear rates, we will have to understand the full, complex set of processes involved in nucleosynthesis. Here we discuss a few of these complexities and detail how the NuGrid collaboration will address them.

Proton-rich material in a state of nuclear statistical equilibrium (NSE) is one of the least studied regimes of nucleosynthesis. One reason for this is that after hydrogen burning, stellar evolution proceeds at conditions of equal number of neutrons and protons or at a slight degree of neutron-richness. Proton-rich nucleosynthesis in stars tends to occur only when hydrogen-rich material that accretes onto a white dwarf or neutron star explodes, or when neutrino interactions in the winds from a nascent proto-neutron star or collapsar-disk drive the matter proton-rich prior to or during the nucleosynthesis. In this paper we solve the NSE equations for a range of proton-rich thermodynamic conditions. We show that cold proton-rich NSE is qualitatively different from neutron-rich NSE. Instead of being dominated by the Fe-peak nuclei with the largest binding energy per nucleon that have a proton to nucleon ratio close to the prescribed electron fraction, NSE for proton-rich material near freeze-out temperature is mainly composed of Ni56 and free protons. Previous results of nuclear reaction network calculations rely on this non-intuitive high proton abundance, which this paper will explain. We show how the differences and especially the large fraction of free protons arises from the minimization of the free energy as a result of a delicate competition between the entropy and the nuclear binding energy.