Atypical flares cannot be naturally explained with standard models. To predict such flares, we need to define their physical characteristics, in particular, their magnetic environment, and identify pairs of reconnected loops. Here, we present in detail a case-study of a confined flare preceded by flux cancellation that leads to the formation of a filament. The slow rise of the non-eruptive filament favours the growth and reconnection of overlying loops. The flare is only of C5.0 class but it is a long duration event. The reason is that it is comprised of three successive stages of reconnection. A non-linear force-free field extrapolation and a magnetic topology analysis allow us to identify the loops involved in the reconnection process and build a reliable scenario for this atypical confined flare. The main result is that a curved magnetic polarity inversion line in active regions is a key ingredient for producing such atypical flares. A comparison with previous extrapolations for typical and atypical confined flares leads us to propose a cartoon for generalizing the concept

We analyzed a small flux rope eruption converted into a helical blowout jet in a fan-spine configuration using multi-wavelength observations taken by SDO, which occurred near the limb on 2016 January 9. In our study, first, we estimated the fan-spine magnetic configuration with the potential field calculation and found a sinistral small filament inside it. The filament along with the flux rope erupted upward and interacted with the surrounding fan- spine magnetic configuration, where the flux rope breaks in the middle section. We observed compact brightening, flare ribbons and post-flare loops underneath the erupting filament. The northern section of the flux rope reconnected with the surrounding positive polarity, while the southern section straightened. Next, we observed the untwisting motion of the southern leg, which was transformed into a rotating helical blowout jet. The sign of the helicity of the mini-filament matches the one of the rotating jet. This is consistent with the jet models presented by Adams et al. (2014) and Sterling et al. (2015). We focused on the fine thread structure of the rotating jet and traced three blobs with the speed of 60-120 km/s, while the radial speed of the jet is approx 400 km/s. The untwisting motion of the jet accelerated plasma upward along the collimated outer spine field lines, and it finally evolved into a narrow coronal mass ejection at the height of approx 9 Rsun . On the basis of the detailed analysis, we discussed clear evidence of the scenario of the breaking of the flux rope and the formation of the helical blowout jet in the fan-spine magnetic configuration.

Utilizing multiwavelength observations and magnetic field data from SDO/AIA, SDO/HMI, GOES and RHESSI, we investigate a large-scale ejective solar eruption of 2014 December 18 from active region NOAA 12241. This event produced a distinctive three-ribbon flare, having two parallel ribbons corresponding to the ribbons of a standard two-ribbon flare, and a larger-scale third quasi-circular ribbon offset from the other two ribbons. There are two components to this eruptive event. First, a flux rope forms above a strong-field polarity-inversion line and erupts and grows as the parallel ribbons turn on, grow, and spread part from that polarity-inversion line; this evolution is consistent with the tether-cutting-reconnection mechanism for eruptions. Second, the eruption of the arcade that has the erupting flux rope in its core under goes magnetic reconnection at the null point of a fan dome that envelops the erupting arcade, resulting in formation of the quasi-circular ribbon; this is consistent with the breakout reconnection mechanism for eruptions. We find that the parallel ribbons begin well before (12 min) circular ribbon onset, indicating that tether-cutting reconnection (or a non-ideal MHD instability) initiated this event, rather than breakout reconnection. The overall setup for this large-scale (circular-ribbon diameter 100000 km) eruption is analogous to that of coronal jets (base size 10000 km), many of which, according to recent findings, result from eruptions of small-scale minifilaments. Thus these findings confirm that eruptions of sheared-core magnetic arcades seated in fan-spine null-point magnetic topology happen on a wide range of size scales on the Sun.

We present observations of interactions between the two filament channels of different chiralities and associated dynamics that occurred during 2014 April 18 -- 20. While two flux ropes of different helicity with parallel axial magnetic fields can only undergo a bounce interaction when they are brought together, the observations at the first glance show that the heated plasma is moving from one filament channel to the other. The SDO/AIA 171 A observations and the PFSS magnetic field extrapolation reveal the presence of fan-spine magnetic configuration over the filament channels with a null point located above them. Three different events of filament activations, partial eruptions, and associated filament channel interactions have been observed. The activation initiated in one filament channel seems to propagate along the neighbour filament channel. We believe that the activation and partial eruption of the filaments bring the field lines of flux ropes containing them closer to the null point and trigger the magnetic reconnection between them and the fan-spine magnetic configuration. As a result, the hot plasma moves along the outer spine line toward the remote point. Utilizing the present observations, for the first time we have discussed how two different-chirality filament channels can interact and show interrelation.

The nature of various plausible causal links between sympathetic events is still a controversial issue. In this work, we present multi-wavelength observations of sympathetic eruptions, associated flares and coronal mass ejections (CMEs) occurring on 2013 November 17 in two close-by active regions. Two filaments i.e., F1 and F2 are observed in between the active regions. Successive magnetic reconnections, caused by different reasons (flux cancellation, shear and expansion) have been identified during the whole event. The first reconnection occurred during the first eruption via flux cancellation between the sheared arcades overlying filament F2, creating a flux rope and leading to the first double ribbon solar flare. During this phase we observed the eruption of overlaying arcades and coronal loops, which leads to the first CME. The second reconnection is believed to occur between the expanding flux rope of F2 and the overlying arcades of the filament F1. We suggest that this reconnection destabilized the equilibrium of filament F1, which further facilitated its eruption. The third stage of reconnection occurred in the wake of the erupting filament F1 between the legs of overlying arcades. This may create a flux rope and the second double ribbon flare and a second CME. The fourth reconnection was between the expanding arcades of the erupting filament F1 and the nearby ambient field, which produced the bi-directional plasma flows towards both upward and downward. Observations and a nonlinear force-free field extrapolation confirm the possibility of reconnection and the causal link between the magnetic systems.

In this paper, we present observations and analysis of an interesting sigmoid formation, eruption and the associated flare that occurred on 2014 April 18 using multi-wavelength data sets. We discuss the possible role of the sigmoid eruption in triggering the flare, which consists of two different set of ribbons: parallel ribbons as well as a large-scale quasi-circular ribbon. Several observational evidence and nonlinear force-free field extrapolation results show the existence of a large-scale fan-spine type magnetic configuration with a sigmoid lying under a section of the fan dome. The event can be explained with the following two phases. During the pre-flare phase, we observed the formation and appearance of sigmoid via tether-cutting reconnection between the two sets of sheared fields under the fan dome. The second, main flare phase, features the eruption of the sigmoid, the subsequent flare with parallel ribbons, and a quasi-circular ribbon. We propose the following multi-stage successive reconnections scenario for the main flare. First, tether-cutting reconnection is responsible for the formation and the eruption of the sigmoid structure. Second, the reconnection occurred in the wake of the erupting sigmoid produces the parallel flare ribbons on the both sides of the circular polarity inversion line. Third, the null-type reconnection higher in the corona, possibly triggered by the erupting sigmoid, leads to the formation of a large quasi-circular ribbon. For the first time we suggest a mechanism for this type of flare consisting of a double set of ribbons triggered by an erupting sigmoid in a large scale fan-spine type magnetic configuration.

The life of a solar active prominence, one of the most remarkable objects on the Sun, is full of dynamics; after first appearing on the Sun the prominence continuously evolves with various internal motions and eventually produces a global eruption toward the interplane- tary space. Here we report that the whole life of an active prominence is successfully re- produced by performing as long-term a magnetohydrodynamic simulation of a magnetized prominence plasma as was ever done. The simulation reveals underlying dynamic processes that give rise to observed properties of an active prominence: invisible subsurface flows self- consistently produce the cancellation of magnetic flux observed at the photosphere, while observed and somewhat counterintuitive strong upflows are driven against gravity by en- hanced gas pressure gradient force along a magnetic field line locally standing vertical. The most highlighted dynamic event, transition into an eruptive phase, occurs as a natural con- sequence of the self-consistent evolution of a prominence plasma interacting with a magnetic field, which is obtained by seamlessly reproducing dynamic processes involved in the forma- tion and eruption of an active prominence.

We clarify a relationship of the dynamics of a solar flare and a growing Coronal Mass Ejection (CME) by investigating the dynamics of magnetic fields during the X2.2-class flare taking place in the solar active region 11158 on 2011 February 15, based on simulation results obtained from Inoue et al. 2014. We found that the strongly twisted lines formed through the tether-cutting reconnection in the twisted lines of a nonlinear force-free field (NLFFF) can break the force balance within the magnetic field, resulting in their launch from the solar surface. We further discover that a large-scale flux tube is formed during the eruption as a result of the tether-cutting reconnection between the eruptive strongly twisted lines and these ambient weakly twisted lines. Then the newly formed large flux tube exceeds the critical height of the torus instability. The tether-cutting reconnection thus plays an important role in the triggering a CME. Furthermore, we found that the tangential fields at the solar surface illustrate different phases in the formation of the flux tube and its ascending phase over the threshold of the torus instability. We will discuss about these dynamics in detail.

Force-freeness of a solar magnetic field is a key to reconstructing invisible coronal magnetic structure of an emerging flux region on the Sun where active phenomena such as flares and coronal mass ejections frequently occur. We have performed magnetohydrodynamic (MHD) simulations which are adjusted to investigate force-freeness of an emerging magnetic field by using the virial theorem. Our focus is on how the force-free range of an emerging flux region develops and how it depends on the twist of a pre-emerged magnetic field. As an emerging flux region evolves, the upper limit of the force-free range continuously increases while the lower limit is asymptotically reduced to the order of a photospheric pressure scale height above the solar surface. As the twist becomes small the lower limit increases and then seems to be saturated. We also discuss the applicability of the virial theorem to an evolving magnetic structure on the Sun.

We present the observations of compound flux rope formation via merging of two nearby filament channels, associated dynamics and its stability that occurred on 2014 January 1 using multiwavelength data. We have also discussed the dynamics of cool and hot plasma moving along the newly formed compound flux rope. The merging started after the interaction between the southern leg of northward filament and the northern leg of the southward filament at around 01:21 UT and continue until a compound flux rope formed at around 01:33 UT. During the merging the cool filaments plasma heated up and started to move along the both side of the compound flux rope i.e., toward north (approx 265 km/s) and south (approx 118 km/s) from the point of merging. After travelling a distance of approx 150 Mm towards north the plasma become cool and started to returns back towards south ( approx 14 km/s) after 02:00 UT. The observations provide an clear example of compound flux rope formation via merging of two different flux ropes and occurrence of flare through tether cutting reconnection. However, the compound flux rope remained stable in the corona and made an confined eruption. The coronal magnetic field decay index measurements revealed that both the filaments and the compound flux rope axis lies within the stability domain (decay index less than 1.5), which may be the possible cause for their stability. The present study also deals with the relationship between the filaments chirality (sinistral) and the helicity (positive) of the surrounding flux rope.

This Letter reports scaling laws of free magnetic energy stored in a solar emerging flux region which is a key to understanding the energetics of solar active phenomena such as solar flares and coronal mass ejections. By performing 3-dimensional magnetohydrodynamic simulations that reproduce several emerging flux regions of different magnetic configurations, we derive power law relationships among emerged magnetic flux, free magnetic energy and relative magnetic helicity in these emerging flux regions. Since magnetic flux is an observable quantity, the scaling law between magnetic flux and free magnetic energy may give a way to estimate invisible free magnetic energy responsible for solar active phenomena.

We performed a magnetohydrodynamic (MHD) simulation using a nonlinear force-free field (NLFFF) in solar active region 11158 to clarify the dynamics of an X2.2-class solar flare. We found that the NLFFF never shows the drastic dynamics seen in observations, i.e., it is in stable state against the perturbations. On the other hand, the MHD simulation shows that when the strongly twisted lines are formed at close to the neutral line, which are produced via tether-cutting reconnection in the twisted lines of the NLFFF, consequently they erupt away from the solar surface via the complicated reconnection. This result supports the argument that the strongly twisted lines formed in NLFFF via tether-cutting reconnection are responsible for breaking the force balance condition of the magnetic fields in the lower solar corona. In addition to this the dynamical evolution of these field lines reveals that at the initial stage the spatial pattern of the footpoints caused by the reconnection of the twisted lines appropriately maps the distribution of the observed two-ribbon flares. Interestingly, after the flare the reconnected field lines convert into the structure like the post flare loops, which is analogous to EUV image taken by SDO. Eventually, we found that the twisted lines exceed a critical height at which the flux tube becomes unstable to the torus instability. These results illustrate the reliability of our simulation and also provide an important relationship between flare-CME dynamics.

The generation of outflows from the Sun known as solar winds is coupled with the heating of the solar corona, and both processes are operated in magnetic structures formed on the Sun. To study the magnetic configuration responsible for these processes, we use three-dimensional magnetohydrodynamic simulations to reproduce magnetic structures via flux emergence and investigate their configurations. We focus on two key quantities characterizing a magnetic configuration: the force-free parameter alpha and the flux expansion rate fex, the former of which represents how much a magnetic field is twisted while the latter represents how sharply a magnetic field expands. We derive distributions of these quantities in an emerging flux region. Our result shows that an emerging flux region consists of outer part where a magnetic loop takes a large flux expansion rate but a small value of alpha at their photospheric footpoints, and inner part occupied by those loops where a strong electric current flows. We also investigate the expansion profile of a magnetic loop composing an emerging flux region. The profile is given by an exponential expansion type near the solar surface while it is given by a quadratic expansion type in an outer atmosphere. These detailed magnetic configurations obtained by this study contribute to developing a realistic model for the coronal heating and solar wind generation.

We develop a nonlinear force-free field (NLFFF) extrapolation code based on the magnetohydrodynamic (MHD) relaxation method. We extend the classical MHD relaxation method in two important ways. First, we introduce an algorithm initially proposed by cite{2002JCoPh.175..645D} to effectively clean the numerical errors associated with $nabla cdot vec{B}$. Second, the multi-grid type method is implemented in our NLFFF to perform direct analysis of the high-resolution magnetogram data. As a result of these two implementations, we successfully extrapolated the high resolution force-free field introduced by cite{1990ApJ...352..343L} with better accuracy in a drastically shorter time. We also applied our extrapolation method to the MHD solution obtained from the flux-emergence simulation by cite{2012ApJ...748...53M}. We found that NLFFF extrapolation may be less effective for reproducing areas higher than a half-domain, where some magnetic loops are found in a state of continuous upward expansion. However, an inverse S shaped structure consisting of the sheared and twisted loops formed in the lower region can be captured well through our NLFFF extrapolation method. We further discuss how well these sheared and twisted fields are reconstructed by estimating the magnetic topology and twist quantitatively.

We study the three-dimensional magnetic structure of solar active region 11158, which produced one X-class and several M-class flares on 2011 February 13$-$16. We focus on the magnetic twist in four flare events, M6.6, X2.2, M1.0, and M1.1. The magnetic twist is estimated from the nonlinear force-free field extrapolated from the vector fields obtained from the Helioseismic and Magnetic Imager on board the Solar Dynamic Observatory using magnetohydrodynamic relaxation method developed by \cite{2011ApJ...738..161I}. We found that strongly twisted lines ranging from half-turn to one-turn twist were built up just before the M6.6- and X2.2 flares and disappeared after that. Because most of the twist remaining after these flares was less than half-turn twist, this result suggests that the buildup of magnetic twist over the half-turn twist is a key process in the production of large flares. On the other hand, even though these strong twists were also built up just before the M1.0 and M1.1 flares, most of them remained afterwords. Careful topological analysis before the M1.0 and M1.1 flares shows that the strongly twisted lines were surrounded mostly by the weakly twisted lines formed in accordance with the clockwise motion of the positive sunspot, whose footpoints are rooted in strong magnetic flux regions. These results imply that these weakly twisted lines might suppress the activity of the strongly twisted lines in the last two M-class flares.

We analyze the temporal evolution of the three-dimensional (3D) magnetic structure of the flaring active region (AR) NOAA 10930 by using the nonlinear force-free fields extrapolated from the photospheric vector magnetic fields observed by the Solar Optical Telescope on board {\it Hinode}. This AR consisted mainly of two types of twisted magnetic field lines: One has a strong negative (left-handed) twist due to the counterclockwise motion of the positive sunspot and is rooted in the regions of both polarities in the sunspot at a considerable distance from the polarity inversion line (PIL). In the flare phase, dramatic magnetic reconnection occurs in those negatively twisted lines in which the absolute value of the twist is greater than a half-turn. The other type consists of both positively and negatively twisted field lines formed relatively close to the PIL between two sunspots. A strong CaII image began to brighten in this region of mixed polarity, in which the positively twisted field lines were found to be injected within one day across the pre-existing negatively twisted region, along which strong currents were embedded. Consequently, the central region near the PIL distributed with a mix of differently twisted field lines and the strong currents may play a prominent role in flare onset.

The plasmoid-induced-reconnection model explaining solar flares based on bursty reconnection produced by an ejecting plasmoid suggests a possible relation between the ejection velocity of a plasmoid and the rate of magnetic reconnection. In this study, we focus on the quantitative description of this relation. We performed magnetohydrodynamic (MHD) simulations of solar flares by changing the values of resistivity and the plasmoid velocity. The plasmoid velocity has been changed by applying an additional force to the plasmoid to see how the plasmoid velocity affects the reconnection rate. An important result is that the reconnection rate has a positive correlation with the plasmoid velocity, which is consistent with the plasmoid-induced-reconnection model for solar flares. We also discuss an observational result supporting this positive correlation.