It is widely believed that adaptive optics only has a role in correcting turbulent wavefronts on large telescopes using very bright reference stars. Unfortunately these are very scarce and many astronomical targets require wavefront correction to work over much of the sky. We therefore need to be able to use very much fainter reference objects. Laser guide stars in principle can allow 0.1 arcsecond resolution but have a number of severe technical problems that limit their application. Our aims are to provide imaging at even higher resolution than Hubble. Lucky Imaging completely eliminates the tip-tilt errors in astronomical wavefront detection. Most of the power that remains is in low order, large scale structures. These may be detected with high sensitivity using photon-counting EMCCD detectors working at high frame rate, up to ~100Hz. With a new design of curvature wavefront sensor, wavefront errors may be measured and corrected to give near diffraction-limited performance on large groundbased telescopes in the visible. Reference stars (and reference compact galaxies) fainter than I~17.5 mag may be used routinely. This paper will describe how these work, what detector and other hardware is needed and what software should be used to measure the wavefront errors and drive deformable mirror hardware. The software techniques that are used are those routinely applied for MRI and CT imaging. They are fast and relatively easy to implement. The net effect is that imaging systems can be constructed that improve substantially over Hubble resolution from the ground for a relatively modest sum of money.

GravityCam is a new concept of ground-based imaging instrument capable of delivering significantly sharper images from the ground than is normally possible without adaptive optics. Advances in optical and near infrared imaging technologies allow images to be acquired at high speed without significant noise penalty. Aligning these images before they are combined can yield a 3-5 fold improvement in image resolution. By using arrays of such detectors, survey fields may be as wide as the telescope optics allows. We describe the instrument and detail its application to accelerate greatly the rate of detection of Earth size planets by gravitational microlensing. GravityCam will improve substantially the quality of weak shear studies of dark matter distribution in distant clusters of galaxies. An extensive microlensing survey will also provide a vast dataset for asteroseismology studies, and GravityCam promises to generate a unique data set on the population of the Kuiper belt and possibly the Oort cloud.

Astronomers working with faint targets will benefit greatly from improved image quality on current and planned ground-based telescopes. At present, most adaptive optic systems are targeted at the highest resolution with bright guide stars. We demonstrate a significantly new approach to measuring low-order wavefront errors by using a pupil-plane curvature wavefront sensor design. By making low order wavefront corrections we can deliver significant improvements in image resolution in the visible on telescopes in the 2.5m to 8.2m range on good astronomical sites. As a minimum the angular resolution will be improved by a factor of 2.5 to 3 under any reasonable conditions and, with further correction and image selection, even sharper images may be obtained routinely. We re-examine many of the assumptions about what may be achieved with faint reference stars to achieve this performance. We show how our new design of curvature wavefront sensor combined with wavefront fitting routines based on radon transforms allow this performance to be achieved routinely. Simulations over a wide range of conditions match the performance already achieved in runs with earlier versions of the hardware described. Reference stars significantly fainter than I 17m may be used routinely to produce images with a near diffraction limited core and halo much smaller than that delivered by natural seeing.

This paper is a report from a recent meeting on "the Future of high-resolution imaging in the visible and infrared", reviewing the astronomical drivers for development and the technological advances that might boost performance. Each of the authors listed contributed a section themselves.

The TP3-WFS (Two Pupil Plane Positions Wavefront Sensor) is, to the best of the authors' knowledge, the first physical implementation of the geometrical wavefront reconstruction algorithm that has been tested in a telescope as part of an actual AO-enabled instrument. The main advantage of this algorithm is that it theoretically provides a fairly good reconstruction accuracy even under very low levels of light, in the order of a few hundreds of photons. This paper presents the first control-related results obtained at the William Herschel Telescope (WHT). Such results demonstrate the feasibility of this novel WFS as part of a real-time AO control loop.

GravityCam is a new concept of ground-based imaging instrument capable of delivering significantly sharper images from the ground than is normally possible without adaptive optics. Advances in optical and near infrared imaging technologies allow images to be acquired at high speed without significant noise penalty. Aligning these images before they are combined can yield a 2.5 to 3 fold improvement in image resolution. By using arrays of such detectors, survey fields may be as wide as the telescope optics allows. Consequently, GravityCam enables both wide-field high-resolution imaging and high-speed photometry. We describe the instrument and detail its application to provide demographics of planets and satellites down to Lunar mass (or even below) across the Milky Way. GravityCam is also suited to improve the quality of weak shear studies of dark matter distribution in distant clusters of galaxies and multiwavelength follow-ups of background sources that are strongly lensed by galaxy clusters. The photometric data arising from an extensive microlensing survey will also be useful for asteroseismology studies, while GravityCam can be used to monitor fast multiwavelength flaring in accreting compact objects, and promises to generate a unique data set on the population of the Kuiper belt and possibly the Oort cloud.

Here we present the Adaptive Optics Lucky Imager (AOLI), a state-of-the-art instrument which makes use of two well proved techniques, Lucky Imaging (LI) and Adaptive Optics (AO), to deliver diffraction limited imaging at visible wavelengths, 20 mas, from ground-based telescopes. Thanks to its revolutionary TP3-WFS, AOLI shall have the capability of using faint reference stars. In the extremely-big telescopes era, the combination of techniques and the development of new WFS systems seems the clue key for success. We give details of the integration and verification phases explaining the defiance that we have faced and the innovative and versatile solutions for each of its subsystems that we have developed, providing also very fresh results after its first fully-working observing run at the William Herschel Telescope (WHT).

The Adaptive Optics Lucky Imager (AOLI) is a new instrument designed to combine adaptive optics (AO) and lucky imaging (LI) techniques to deliver high spatial resolution in the visible, 20 mas, from ground-based telescopes. Here we present details of the integration and verification phases explaining the defiance that we have faced and the innovative and versatile solution of modular integration for each of its subsystems that we have developed. Modularity seems a clue key for opto-mechanical integration success in the extremely-big telescopes era. We present here the very fresh preliminary results after its first fully-working observing run on the WHT.

AOLI (Adaptive Optics Lucky Imager) is a state-of-art instrument that combines adaptive optics (AO) and lucky imaging (LI) with the objective of obtaining diffraction limited images in visible wavelength at mid- and big-size ground-based telescopes. The key innovation of AOLI is the development and use of the new TP3-WFS (Two Pupil Plane Positions Wavefront Sensor). The TP3-WFS, working in visible band, represents an advance over classical wavefront sensors such as the Shack-Hartmann WFS (SH-WFS) because it can theoretically use fainter natural reference stars, which would ultimately provide better sky coverages to AO instruments using this newer sensor. This paper describes the software, algorithms and procedures that enabled AOLI to become the first astronomical instrument performing real-time adaptive optics corrections in a telescope with this new type of WFS, including the first control-related results at the William Herschel Telescope (WHT).

The limits to the angular resolution achievable with conventional ground-based telescopes are unchanged over 70 years. Atmospheric turbulence limits image quality to typically ~1 arcsec in practice. We have developed a new concept of ground-based imaging instrument called GravityCam capable of delivering significantly sharper images from the ground than is normally possible without adaptive optics. The acquisition of visible images at high speed without significant noise penalty has been made possible by advances in optical and near IR imaging technologies. Images are recorded at high speed and then aligned before combination and can yield a 3-5 fold improvement in image resolution. Very wide survey fields are possible with widefield telescope optics. We describe GravityCam and detail its application to accelerate greatly the rate of detection of Earth size planets by gravitational microlensing. GravityCam will also improve substantially the quality of weak shear studies of dark matter distribution in distant clusters of galaxies. The microlensing survey will also provide a vast dataset for asteroseismology studies. In addition, GravityCam promises to generate a unique data set that will help us understand of the population of the Kuiper belt and possibly the Oort cloud.

The Adaptive Optics Lucky Imager, AOLI, is an instrument developed to deliver the highest spatial resolution ever obtained in the visible, 20 mas, from ground-based telescopes. In AOLI a new philosophy of instrumental prototyping has been applied, based on the modularization of the subsystems. This modular concept offers maximum flexibility regarding the instrument, telescope or the addition of future developments.

The combination of Lucky Imaging with a low order adaptive optics system was demonstrated very successfully on the Palomar 5m telescope nearly 10 years ago. It is still the only system to give such high-resolution images in the visible or near infrared on ground-based telescope of faint astronomical targets. The development of AOLI for deployment initially on the WHT 4.2 m telescope in La Palma, Canary Islands, will be described in this paper. In particular, we will look at the design and status of our low order curvature wavefront sensor which has been somewhat simplified to make it more efficient, ensuring coverage over much of the sky with natural guide stars as reference object. AOLI uses optically butted electron multiplying CCDs to give an imaging array of 2000 x 2000 pixels.

We report high spatial resolution i' band imaging of the multiple T Tauri system LkH$\alpha$ 262/LkH$\alpha$ 263 obtained during the first commissioning period of the Adaptive Optics Lucky Imager (AOLI) at the 4.2 m William Herschel Telescope, using its Lucky Imaging mode. AOLI images have provided photometry for each of the two components LkH$\alpha$ 263 A and B (0.41 arcsec separation) and marginal evidence for an unresolved binary or a disc in LkH$\alpha$ 262. The AOLI data combined with previously available and newly obtained optical and infrared imaging show that the three components of LkH$\alpha$ 263 are co-moving, that there is orbital motion in the AB pair, and, remarkably, that LkH$\alpha$ 262-263 is a common proper motion system with less than 1 mas/yr relative motion. We argue that this is a likely five-component gravitationally bounded system. According to BT-settl models the mass of each of the five components is close to 0.4 M$_{\odot}$ and the age is in the range 1-2 Myr. The presence of discs in some of the components offers an interesting opportunity to investigate the formation and evolution of discs in the early stages of multiple very low-mass systems. In particular, we provide tentative evidence that the disc in 263C could be coplanar with the orbit of 263AB.

In this paper we present the Adaptive Optics Lucky Imager (AOLI), a state-of-the-art instrument which makes use of two well proved techniques for extremely high spatial resolution with ground-based telescopes: Lucky Imaging (LI) and Adaptive Optics (AO). AOLI comprises an AO system, including a low order non-linear curvature wavefront sensor together with a 241 actuators deformable mirror, a science array of four 1024x1024 EMCCDs, allowing a 120x120 down to 36x36 arcseconds field of view, a calibration subsystem and a powerful LI software. Thanks to the revolutionary WFS, AOLI shall have the capability of using faint reference stars ({\it I\/} $\sim$ 16.5-17.5), enabling it to be used over a much wider part of the sky than with common Shack-Hartmann AO systems. This instrument saw first light in September 2013 at William Herschel Telescope. Although the instrument was not complete, these commissioning demonstrated its feasibility, obtaining a FWHM for the best PSF of 0.151$\pm$0.005 arcsec and a plate scale of 55.0$\pm$0.3 mas/pixel. Those observations served us to prove some characteristics of the interesting multiple T Tauri system LkH$\alpha$ 262-263, finding it to be gravitationally bounded. This interesting multiple system mixes the presence of proto-planetary discs, one proved to be double, and the first-time optically resolved pair LkH$\alpha$ 263AB (0.42 arcsec separation).

Lucky Imaging combined with a low order adaptive optics system has given the highest resolution images ever taken in the visible or near infrared of faint astronomical objects. This paper describes a new instrument that has already been deployed on the WHT 4.2m telescope on La Palma, with particular emphasis on the optical design and the predicted system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow virtually full sky coverage with faint natural guide stars. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.

We explore the scientific potential of next-generation high-angular resolution optical imager to study the AGN/Host connection. The availability of a significant number of X-raying AGN with natural guide stars, allowing for adaptive optics at optical wavelengths, offers an interesting perspective to complement high-resolution work currently done in the near-infrared.

We obtained high-resolution, high-contrast optical imaging in the SDSS $i'$ band with the LuckyCam camera mounted on the 2.56m Nordic Optical Telescope, to search for faint stellar companions to 16 stars harbouring transiting exoplanets. The Lucky Imaging technique uses very short exposures to obtain near diffraction-limited images yielding sub-arcsecond sensitivity, allowing us to search for faint stellar companions within the seeing disc of the primary planet host. Here we report the detection of two candidate stellar companions to the planet host TrES-1 at separations $<6.5\arcsec$ and we confirm stellar companions to CoRoT-2, CoRoT-3, TrES-2, TrES-4, and HAT-P-7 already known in the literature. We do not confirm the candidate companions to HAT-P-8 found via Lucky Imaging by \citet{Bergfors2013}, however, most probably because HAT-P-8 was observed in poor seeing conditions. Our detection sensitivity limits allow us to place constraints on the spectral types and masses of the putative bound companions to the planet host stars in our sample. If bound, the stellar companions identified in this work would provide stringent observational constraints to models of planet formation and evolution. In addition these companions could affect the derived physical properties of the exoplanets in these systems.

Lucky Imaging is now an established observing procedure that delivers near diffraction-limited images in the visible on ground-based telescopes up to ~2.5 m in diameter. Combined with low order adaptive optics it can deliver resolution several times better than that of the Hubble Space Telescope. Many images are taken at high speed as atmospheric turbulent effects appear static on these short timescales. The sharpest images are selected, shifted and added to give a much higher resolution than is normally possible in ground-based long exposure time observations. The method is relatively inefficient as a significant fraction of the frames are discarded because of their relatively poor quality. This paper shows that a new Lucky Imaging processing method involving selection in Fourier space can substantially improve the selection percentages. The results show that high resolution images with a large isoplanatic patch size may be obtained routinely both with conventional Lucky Imaging and with the new Lucky Fourier method. Other methods of improving the sensitivity of the method to faint reference stars are also described.

Increasing interest in astronomical applications of non-linear curvature wavefront sensors for turbulence detection and correction makes it important to understand how best to handle the data they produce, particularly at low light levels. Algorithms for wavefront phase-retrieval from a four-plane curvature wavefront sensor are developed and compared, with a view to their use for low order phase compensation in instruments combining adaptive optics and Lucky Imaging. The convergence speed and quality of iterative algorithms is compared to their step-size and techniques for phase retrieval at low photon counts are explored. Computer simulations show that at low light levels, preprocessing by convolution of the measured signal with a gaussian function can reduce by an order of magnitude the photon flux required for accurate phase retrieval of low-order errors. This facilitates wavefront correction on large telescopes with very faint reference stars.

The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow dramatically fainter reference stars to be used, allowing virtually full sky coverage with a natural guide star. This paper also describes a significant improvements in the efficiency of Lucky Imaging, important advances in wavefront reconstruction with curvature sensors and the results of simulations and sensitivity limits. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is likely to be the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.

Electron Multiplying CCDs (EMCCDs) are used much less often than they might be because of the challenges they offer camera designers more comfortable with the design of slow-scan detector systems. However they offer an entirely new range of opportunities in astrophysical instrumentation. This paper will show some of the exciting new results obtained with these remarkable devices and talk about their potential in other areas of astrophysical application. We will then describe how they may be operated to give the very best performance at the lowest possible light levels. We will show that clock induced charge may be reduced to negligible levels and that, with care, devices may be clocked at significantly higher speeds than usually achieved. As an example of the advantages offered by these detectors we will show how a multi-detector EMCCD curvature wavefront sensor will revolutionise the sensitivity of adaptive optics instruments and been able to deliver the highest resolution images ever taken in the visible or the near infrared.

The Adaptive Optics Lucky Imager (AOLI) is a new instrument under development to demonstrate near diffraction limited imaging in the visible on large ground-based telescopes. We present the adaptive optics system being designed for the instrument comprising a large stroke deformable mirror, fixed component non-linear curvature wavefront sensor and photon-counting EMCCD detectors. We describe the optical design of the wavefront sensor where two photoncounting CCDs provide a total of four reference images. Simulations of the optical characteristics of the system are discussed, with their relevance to low and high order AO systems. The development and optimisation of high-speed wavefront reconstruction algorithms are presented. Finally we discuss the results of simulations to demonstrate the sensitivity of the system.

High Time Resolution Astrophysics (HTRA) concerns itself with observations on short scales normally defined as being lower than the conventional read-out time of a CCD. As such it is concerned with condensed objects such as neutron stars, black holes and white dwarfs, surfaces with extreme magnetic reconnection phenomena, as well as with planetary scale objects through transits and occultations. HTRA is the only way to make a major step forward in our understanding of several important astrophysical and physical processes; these include the extreme gravity conditions around neutron stars and stable orbits around stellar mass black holes. Transits, involving fast timing, can give vital information on the size of, and satellites around exoplanets. In the realm of fundamental physics very interesting applications lie in the regime of ultra-high time resolution, where quantum-physical phenomena, currently studied in laboratory physics, may be explored. HTRA science covers the full gamut of observational optical/IR astronomy from asteroids to {\gamma}-rays bursts, contributing to four out of six of AstroNet's fundamental challenges described in their Science Vision for European Astronomy. Giving the European-Extremely Large Telescope (E-ELT) an HTRA capability is therefore importance. We suggest that there are three possibilities for HTRA and E-ELT. These are, firstly giving the E-ELT first light engineering camera an HTRA science capability. Secondly, to include a small HTRA instrument within another instrument. Finally, to have separate fibre feeds to a dedicated HTRA instrument. In this case a small number of fibres could be positioned and would provide a flexible and low cost means to have an HTRA capability. By the time of E-ELT first light, there should be a number of significant developments in fast detector arrays, in particular in the infra-red (IR) region.

The design of electron multiplying CCD cameras require a very different approach from that appropriate for slow scan CCD operation. This paper describes the main problems in using electron multiplying CCDs for high-speed, photon counting applications in astronomy and how these may be substantially overcome. With careful design it is possible to operate the E2V Technologies L3CCDs at rates well in excess of that claimed by the manufacturer, and that levels of clock induced charge dramatically lower than those experienced with commercial cameras that need to operate at unity gain. Measurements of the performance of the E2V Technologies CCD201 operating at 26 MHz will be presented together with a guide to the effective reduction of clock induced charge levels. Examples of astronomical results obtained with our cameras are presented.

Near-diffraction limited imaging and spectroscopy in the visible on large (8-10 meter) class telescopes has proved to be beyond the capabilities of current adaptive optics technologies, even when using laser guide stars. The need for high resolution visible imaging in any part of the sky suggests that a rather different approach is needed. This paper describes the results of simulations, experiments and astronomical observations that show that a combination of low order adaptive optic correction using a 4-field curvature sensor and fast Lucky Imaging strategies with a photon counting CCD camera systems should deliver 20-25 milliarcsecond resolution in the visible with reference stars as faint as 18.5 magnitude in I band on large telescopes. Such an instrument may be used to feed an integral field spectrograph efficiently using configurations that will also be described.

We use analytical and N-body methods to examine the survival of wide stellar binaries against repeated encounters with dark substructures orbiting in the dark matter haloes of dwarf spheroidal galaxies (dSphs). Our models adopt cosmologically-motivated conditions wherein dSphs are dark-matter dominated systems that form hierarchically and orbit about a host galaxy. Our analytical estimates show that wide binaries are disrupted at a rate that is proportional to the local density of dark substructures averaged over the life-time of the binary population. The fact that external tides can efficiently strip dark substructures from the outskirts of dSphs implies that the present number and distribution of binaries is strongly coupled with the mass evolution of individual galaxies. Yet we show that for the range of dynamical masses and Galactocentric distances spanned by Milky Way dSphs, a truncation in the separation function at a_max <~ 0.1 pc is expected in all these galaxies. An exception may be the Sagittarius dSph, which has lost most of is dark matter envelope to tides and is close to full disruption. Our simulations indicate that at separations larger than a_max the perturbed binary distribution scales as dN/da \propto a^{-2.1} independently of the mass and density of substructures. These results may be used to determine whether the binary separation function found in dwarf galaxies is compatible with the scale-free hierarchical picture that envisions the existence of dark substructures in all galactic haloes. We show that the ACS camera on board of the Hubble telescope may be able to test this prediction in dSphs at heliocentric distances <100 kpc, even if the binary fraction amounts only 10% of the stellar population.

PILOT (the Pathfinder for an International Large Optical Telescope) is a proposed 2.5 m optical/infrared telescope to be located at Dome C on the Antarctic plateau. Conditions at Dome C are known to be exceptional for astronomy. The seeing (above ~30 m height), coherence time, and isoplanatic angle are all twice s good as at typical mid-latitude sites, while the water-vapour column, and the atmosphere and telescope thermal emission are all an order of magnitude better. These conditions enable a unique scientific capability for PILOT, which is addressed in this series of papers. The current paper presents an overview of the optical and instrumentation suite for PILO and its expected performance, a summary of the key science goals and observational approach for the facility, a discussion of the synergies between the science goals for PILOT and other telescopes, and a discussion of the future of Antarctic astronomy. Paper II and Paper III present details of the science projects divided, respectively, between the distant Universe (i.e., studies of first light, and the assembly and evolution of structure) and the nearby Universe (i.e., studies of Local Group galaxies, the Milky Way, and the Solar System).

We describe the results from a new instrument which combines Lucky Imaging and Adaptive Optics to give the first routine direct diffraction-limited imaging in the visible on a 5m telescope. With fast image selection behind the Palomar AO system we obtained Strehl ratios of 5-20% at 700 nm in a typical range of seeing conditions, with a median Strehl of approximately 12% when 10% of the input frames are selected. At wavelengths around 700 nm the system gave diffraction-limited 35 milliarcsecond FWHMs. At 950 nm the output Strehl ratio was as high as 36% and at 500 nm the FWHM resolution was as small as 42 milliarcseconds, with a low Strehl ratio but resolution improved by factor of ~20 compared to the prevailing seeing. To obtain wider fields we also used multiple Lucky-Imaging guide stars in a configuration similar to a ground layer adaptive optics system. With eight guide stars but very undersampled data we obtained 300 milliarcsecond resolution across a 30X30 arcsec field of view in i' band.

We present results from a high-angular-resolution survey of 78 very low mass (VLM) binary systems with 6.0 <= V-K colour <= 7.5 and proper motion >= 0.15 arcsec/yr. 21 VLM binaries were detected, 13 of them new discoveries. The new binary systems range in separation between 0.18 arcsec and 1.3 arcsec. The distance-corrected binary fraction is 13.5% (+6.5%/-4%), in agreement with previous results. 9 of the new binary systems have orbital radii > 10 AU, including a new wide VLM binary with 27 AU projected orbital separation. One of the new systems forms two components of a 2300 AU separation triple system. We find that the orbital radius distribution of the binaries with V-K < 6.5 in this survey appears to be different from that of redder (lower-mass) objects, suggesting a possible rapid change in the orbital radius distribution at around the M5 spectral type. The target sample was also selected to investigate X-ray activity among VLM binaries. There is no detectable correlation between excess X-Ray emission and the frequency and binary properties of the VLM systems.

We survey a sample of 32 M5-M8 stars with distance < 40pc for companions with separations between 0.1 arcsec and 1.5 arcsec and with Delta m_i <5. We find five new VLM binaries with separations between 0.15 arcsec and 1.1 arcsec, including a candidate brown dwarf companion. The raw binary fraction is 16% +8/-4% and the distance bias corrected fraction is 7% +7/-3%, for companions within the surveyed range. No systems with contrast ratio Delta m_i>1 were found, even though our survey is sensitive to up to Delta m=5 (well into the brown dwarf regime). The distribution of orbital radii is in broad agreement with previous results, with most systems at 1-5AU, but one detected binary is very wide at 46.8+/-5.0AU. We also serendipitously imaged for the first time a companion to Ross 530, a metal-poor single-lined spectroscopic binary. We used the new Lucky Imaging system LuckyCam on the 2.5m Nordic Optical Telescope to complete the 32 very low mass star i' and z' survey in only 5 hours of telescope time.

We present preliminary results from the first part of the LuckyCam late M-dwarf binarity survey. We survey a sample of 48 nearby ($<$40 pc) and red (M5-M9) stars with the novel high angular resolution visible light imaging technique Lucky Imaging, in only 8 hours of 2.5m telescope time. We discover 10 new binaries; although the survey is sensitive to brown dwarf companions none are detected. The orbital radius distribution of the newly discovered binaries broadly matches that of previous detections by other groups, although we do discover one wide binary at ~40AU.

We use a Lucky Imaging system to obtain I-band images with much improved angular resolution on a ground-based 2.5m telescope. We present results from a 10-night assessment campaign on the 2.56m Nordic Optical Telescope and quantify the performance of our system in seeings better than 1.0''. In good seeing we have acquired near diffraction-limited images; in poorer seeing the angular resolution has been routinely improved by factors of 2.5-4. The system can use guide stars as faint as I=16 with full performance and its useful field of view is consistently larger than 40" diameter. The technique shows promise for a number of science programmes, both galactic (eg. binary candidates, brown dwarfs, globular cluster cores) and extragalactic (eg. quasar host galaxies, damped Lyman-alpha absorbers).

The Cambridge Infra-red Panoramic Survey Spectrograph (CIRPASS) is described. This near-infrared (NIR) spectrograph has been used on the 8m Gemini-South Telescope, the 3.9m Anglo-Australian Telescope (AAT) and the 4.2m William Herschel Telescope (WHT). Its performance in both integral field mode and multi-object mode is discussed and some scientific highlights are presented. A multi-IFU system, which is currently under construction, is also described.

Low light level charge coupled devices (L3CCDs) have recently been developed, incorporating on-chip gain. They may be operated to give an effective readout noise much less than one electron by implementing an on-chip gain process allowing the detection of individual photons. However, the gain mechanism is stochastic and so introduces significant extra noise into the system. In this paper we examine how best to process the output signal from an L3CCD so as to minimize the contribution of stochastic noise, while still maintaining photometric accuracy. We achieve this by optimising a transfer function which translates the digitised output signal levels from the L3CCD into a value approximating the photon input as closely as possible by applying thresholding techniques. We identify several thresholding strategies and quantify their impact on photon counting accuracy and effective signal-to-noise. We find that it is possible to eliminate the noise introduced by the gain process at the lowest light levels. Reduced improvements are achieved as the light level increases up to about twenty photons per pixel and above this there is negligible improvement. Operating L3CCDs at very high speeds will keep the photon flux low, giving the best improvements in signal-to-noise ratio.

The LCIR Survey, using the Cambridge IR Survey Instrument (CIRSI), reaches H \~ 20-21 over ~1 deg^2. We present results for 744 arcmin^2 in which public UBVRI data exist. We compare optical-IR colours with predictions of a semi-analytic hierarchical model (SAM) and find reasonable agreement. We also determine photometric redshifts, finding a median z of z_m ~ 0.55. We compare N(z) of different spectral types with models, showing that the observations are inconsistent with simple PLE models while the SAM provides a reasonable fit to the total N(z) but underestimates the number of z ~ 1 red spectral types. We also present N(z) for samples of red objects (EROs). We find that EROs with R - H > 4 and H < 20.5 have z_m ~ 1; redder EROs have higher z_m. For 19 < H < 20, EROs with R - H > 4 comprise ~18% of the observed galaxy population while in the SAM they contribute only ~4%. We also determine the angular correlation function w(theta) for magnitude, colour, spectral type and photo-z selected samples and use the estimated N(z) to derive the spatial clustering xi(r). Parametrizing xi(r) by xi(r_c,z)=(r_c/r_*(z))^(-1.8) (r_c comoving), we find that r_*(z) increases by ~1.5-2 times from z = 0 to z ~ 1.2. We interpret this as a selection effect - the galaxies selected at z ~ 1.2 are intrinsically very luminous. When galaxies are selected by absolute magnitude we find no evidence for evolution in r_* over this z range. Extrapolated to z = 0, we find r_*(0) ~ 6.5 h^-1Mpc for red galaxies and r_*(0) ~ 2-4 h^-1Mpc for blue galaxies. We also find that while the angular clustering amplitude of EROs with R - H > 4 or I - H > 3 is up to four times that of the whole galaxy population, the spatial clustering length r_*(z=1) is ~7.5-10.5 h^-1Mpc which is only a factor of ~1.7 times r_* for non-EROs lying in a similar z and luminosity range.

By selecting short exposure images taken using a CCD with negligible readout noise we obtained essentially diffraction-limited 810 nm images of faint objects using nearby reference stars brighter than I=16 at a 2.56 m telescope. The FWHM of the isoplanatic patch for the technique is found to be 50 arcseconds, providing ~20% sky coverage around suitable reference stars.

(Abridged) The Las Campanas Infrared Survey, based on broad-band optical and near-infrared photometry, is designed to robustly identify a statistically significant and representative sample of evolved galaxies at redshifts z>1. We have completed an H-band imaging survey over 1.1 square degrees of sky in six separate fields. The average 5 sigma detection limit in a four arcsecond diameter aperture is H ~ 20. Here we describe the design of the survey, the observation strategies, data reduction techniques, and object identification procedures. We present sample near-infrared and optical photometric catalogs for objects identified in two survey fields. We perform object detection in all bandpasses and identify ~ 54,000 galaxies over 1,408 square arcminutes of sky in the two fields. Of these galaxies, ~ 14,000 are detected in the H-band and ~ 2,000 have the colors of evolved galaxies, I - H >3, at z > 1. We find that (1) the differential number counts N(m) for the H-band detected objects has a slope of 0.44 at H < 19 and 0.27 for H > 19. In addition, we find that (2) the differential number counts for the H detected red objects has a slope of 0.85 at H < 20 and 0.32 at H > 20, with a mean surface density ~ 3,000 degree^{-2} mag^{-1} at H=20. Finally, we find that (3) galaxies with red optical to near-IR colors (I-H > 3) constitute ~ 20% of the H detected galaxies at H ~ 21, but only 2% at H = 19. We show that red galaxies are strongly clustered, which results in a strong field to field variation in their surface density. Comparisons of observations and predictions based on various formation scenarios indicate that these red galaxies are consistent with mildly evolving early-type galaxies at z ~ 1, although with a significant amount of on-going star formation as indicated by the large scatter in their V-I colors.

(Abridged) We have identified a population of faint red galaxies from a 0.62 square degree region of the Las Campanas Infrared Survey whose properties are consistent with their being the progenitors of early-type galaxies. The optical and IR colors, number-magnitude relation and angular clustering together indicate modest evolution and increased star formation rates among the early-type field population at redshifts between one and two. The counts of red galaxies with $H$ magnitudes between 17 and 20 rise with a slope that is much steeper than that of the total H sample. The surface density of red galaxies drops from roughly 3000 per square degree at H = 20.5, I-H > 3 to ~ 20 per square degree at H = 20, I-H > 5. The V-I colors are approximately 1.5 magnitudes bluer on average than a pure old population and span a range of more than three magnitudes. The colors, and photometric redshifts derived from them, indicate that the red galaxies have redshift distributions adequately described by Gaussians with sigma_z ~ 0.2$ centered near redshift one, with the exception that galaxies having $V-I<1.6$ and $I-H>3$ are primarily in the 1.5 < z < 2 range. We find co-moving correlation lengths of 9-10 Mpc at z ~ 1, comparable to, or larger than, those found for early-type galaxies at lower redshifts. A simple photometric evolution model reproduces the counts of the red galaxies, with only a ~ 30% decline in the underlying space density of early-type galaxies at z ~ 1.2. We suggest on the basis of the colors, counts, and clustering that these red galaxies are the bulk of the progenitors of present day early-type galaxies.

A quantitative assessment is presented of diffraction-limited stellar images with Strehl ratios of 0.25-0.30 obtained by selection of short-exposure CCD images of stars brighter than +6m at 810nm with the Nordic Optical Telescope.

A radically new CCD development by Marconi Applied Technologies has enabled substantial internal gain within the CCD before the signal reaches the output amplifier. With reasonably high gain, sub-electron readout noise levels are achieved even at MHz pixel rates. This paper reports a detailed assessment of these devices, including novel methods of measuring their properties when operated at peak mean signal levels well below one electron per pixel. The devices are shown to be photon shot noise limited at essentially all light levels below saturation. Even at the lowest signal levels the charge transfer efficiency is good. The conclusion is that these new devices have radically changed the balance in the perpetual trade-off between readout noise and the speed of readout. They will force a re-evaluation of camera technologies and imaging strategies to enable the maximum benefit to be gained from these high-speed, essentially noiseless readout devices. This new LLLCCD technology, in conjunction with thinning (backside illumination) should provide detectors which will be very close indeed to being theoretically perfect.

We present the first detection of a gravitational depletion signal at near-infrared wavelengths, based on deep panoramic images of the cluster Abell 2219 (z=0.22) taken with the Cambridge Infrared Survey Instrument (CIRSI) at the prime focus of the 4.2m William Herschel Telescope. Infrared studies of gravitational depletion offer a number of advantages over similar techniques applied at optical wavelengths, and can provide reliable total masses for intermediate redshift clusters. Using the maximum likelihood technique developed by Schneider, King & Erben (1999), we detect the gravitational depletion at the 3 sigma confidence level. By modeling the mass distribution as a singular isothermal sphere and ignoring uncertainty in the unlensed number counts, we find an Einstein radius of 13.7 +3.9/-4.2 arcsec (66% confidence limit). This corresponds to a projected velocity dispersion of approximately 800 km/s, in agreement with constraints from strongly-lensed features. For a Navarro, Frenk and White mass model, the radial dependence observed indicates a best-fitting halo scale length of 125/h kpc}. We investigate the uncertainties arising from the observed fluctuations in the unlensed number counts, and show that clustering is the dominant source of error. We extend the maximum likelihood method to include the effect of incompleteness, and discuss the prospects of further systematic studies of lensing in the near-infrared band.

HST images of the western hot spot of the nearby FRII radio galaxy Pictor A resolve the hot spot into an amorphous region of highly polarized wisps. The high polarization (>~ 50%) indicates that the optical emission is synchrotron radiation and that the magnetic field structure has been well resolved. The magnetic field is oriented nearly perpendicular to the jet axis and apparently very uniform. We interpret these observations in terms of a compressed magnetic field at the working surface where the jet impinges on the intergalactic medium some 100 kpc from the nucleus of the host galaxy. Keywords: Polarization --- radiation mechanisms: nonthermal --- galaxies: active --- galaxies: individual: Pictor A --- galaxies: jets.

We present the first high resolution polarization map of the ultraviolet emission from the outer jet in M87. The data were obtained by the Faint Object Camera (FOC) on the Hubble Space Telescope. The polarization map has a resolution of 0.2 arcsec and was derived using data from three linearly polarized images combined with the best available calibration data. The ultraviolet emission is highly polarized (~40\%) with the magnetic vector aligned roughly with the jet axis, except in the region of the brightest knot (Knot A) where the position angle changes abruptly and the magnetic vector becomes perpendicular to the jet axis. A similar behaviour is seen in the 2cm VLA radio polarization map. By aligning the FOC and VLA data, we present ultraviolet--2cm spectral index, depolarization and rotation measure maps. We identify a region of high depolarization adjacent to Knot A. This is the first direct observational evidence that indicates the presence of a cloud or filament of dense thermal material which is mixed with the synchrotron emitting plasma of the jet. The interaction of the jet with this cloud is likely to be responsible for the sudden increase in the brightness of the jet at Knot A due to an induced shock. We suggest that the dark line seen in the 2cm radio data between Knot A and Knot C could be the shadow or magnetotail of the depolarizing cloud in the jet.