Aims. We aim to determine far-infrared fluxes at 70, 100, and 160$\mu$m of the five major Uranus satellites Titania, Oberon, Umbriel, Ariel and Miranda, based on observations with the photometer PACS-P aboard the Herschel Space Observatory. Methods. The bright image of Uranus is subtracted using a scaled Uranus point spread function (PSF) reference established from all maps of each wavelength in an iterative process removing the superimposed moons. Photometry of the satellites is performed by PSF photometry. Thermophysical models of the icy moons are fitted to the photometry of each measurement epoch and auxilliary data at shorter wavelengths. Results. The best fitting thermophysical models provide constraints for important thermal properties of the moons like surface roughness and thermal inertia. We present the first thermal infrared radiometry longward of 50$\mu$m of the four largest Uranian moons, Titania, Oberon, Umbriel and Ariel, at epochs with equator-on illumination. Due to this inclination geometry there was heat transport to the night side so that thermal inertia played a role, allowing us to constrain that parameter. Also some indication for differences in the thermal properties of leading and trailing hemispheres is found. We specify precisely the systematic error of the Uranus flux by its moons, when using Uranus as a far-infrared prime flux calibrator. Conclusions. We have successfully demonstrated an image processing technique for PACS photometer data allowing to remove a bright central source. We have established improved thermophysical models of the five major Uranus satellites. Derived thermal inertia values resemble more those of TNO dwarf planets Pluto and Haumea than those of smaller TNOs and Centaurs.

Non-resolved thermal infrared observations enable studies of thermal and physical properties of asteroid surfaces provided the shape and rotational properties of the target are well determined via thermo-physical models. We used calibration-programme Herschel PACS data (70, 100, 160 $\mu$m) and state-of-the-art shape models derived from adaptive-optics observations and/or optical light curves to constrain for the first time the thermal inertia of twelve large main-belt asteroids. We also modelled previously well-characterised targets such as (1) Ceres or (4) Vesta as they constitute important benchmarks. Using the scale as a free parameter, most targets required a re-scaling $\sim$5\% consistent with what would be expected given the absolute calibration error bars. This constitutes a good cross-validation of the scaled shape models, although some targets required larger re-scaling to reproduce the IR data. We obtained low thermal inertias typical of large main belt asteroids studied before, which continues to give support to the notion that these surfaces are covered by fine-grained insulating regolith. Although the wavelengths at which PACS observed are longwards of the emission peak for main-belt asteroids, they proved to be extremely valuable to constrain size and thermal inertia and not too sensitive to surface roughness. Finally, we also propose a graphical approach to help examine how different values of the exponent used for scaling the thermal inertia as a function of heliocentric distance (i.e. temperature) affect our interpretation of the results.

We present an analysis of DES17X1boj and DES16E2bjy, two peculiar transients discovered by the Dark Energy Survey (DES). They exhibit nearly identical double-peaked light curves which reach very different maximum luminosities (M$_\mathrm{r}$ = -15.4 and M$_\mathrm{r}$ = -17.9, respectively). The light curve evolution of these events is highly atypical and has not been reported before. The transients are found in different host environments: DES17X1boj was found near the nucleus of a spiral galaxy, while DES16E2bjy is located in the outskirts of a passive red galaxy. Early photometric data is well fitted with a blackbody and the resulting moderate photospheric expansion velocities (1800 km/s for DES17X1boj and 4800 km/s for DES16E2bjy) suggest an explosive or eruptive origin. Additionally, a feature identified as high-velocity CaII absorption (v $\approx$ 9400km/s) in the near-peak spectrum of DES17X1boj may imply that it is a supernova. While similar light curve evolution suggests a similar physical origin for these two transients, we are not able to identify or characterise the progenitors.

The goal of this work is to determine the physical characteristics of resonant, detached and scattered disk objects in the transneptunian region, observed mainly in the framework of the "TNOs are Cool!" Herschel Open Time Key Program. Based on thermal emission measurements with the Herschel/PACS and Spitzer/MIPS instruments we determine size, albedo, and surface thermal properties for 23 objects using radiometric modelling techniques. This is the first analysis in which the physical properties of objects in the outer resonances are determined for a notable sample. In addition to the results for individual objects, we have compared these characteristics with the bulk properties of other populations of the transneptunian region. The newly analyzed objects show a large variety of beaming factors, indicating a diversity of thermal properties, and in general, they follow the albedo-colour clustering identified earlier for Kuiper belt objects and Centaurs, further strengthening the evidence for a compositional discontinuity in the young Solar System.

Here we present the results of visible range light curve observations of ten Centaurs using the Kepler Space Telescope in the framework of the K2 mission. Well defined periodic light curves are obtained in six cases allowing us to derive rotational periods, a notable increase in the number of Centaurs with known rotational properties. The low amplitude light curves of (471931) 2013 PH44 and (250112) 2002 KY14 can be explained either by albedo variegations, binarity or elongated shape. (353222) 2009 YD7 and (514312) 2016 AE193 could be rotating elongated objects, while 2017 CX33 and 2012 VU85 are the most promising binary candidates due to their slow rotations and higher light curve amplitudes. (463368) 2012 VU85 has the longest rotation period, P=56.2h observed among Centaurs. The P>20h rotation periods obtained for the two potential binaries underlines the importance of long, uninterrupted time series photometry of solar system targets that can suitably be performed only from spacecraft, like the Kepler in the K2 mission, and the currently running TESS mission.

In this paper we present the "Small Bodies: Near and Far" Infrared Database, an easy-to-use tool intended to facilitate the modeling of thermal emission of small Solar System bodies. Our database collects thermal emission measurements of small Solar Systems targets that are otherwise available in scattered sources and gives a complete description of the data, with all information necessary to perform direct scientific analyses and without the need to access additional, external resources. This public database contains representative data of asteroid observations of large surveys (e.g. AKARI, IRAS and WISE) as well as a collection of small body observations of infrared space telescopes (e.g. the Herschel Space Observatory) and provides a web interface to access this data (https://ird.konkoly.hu). We also provide an example for the direct application of the database and show how it can be used to estimate the thermal inertia of specific populations, e.g. asteroids within a given size range. We show how different scalings of thermal inertia with heliocentric distance (i.e. temperature) may affect our interpretation of the data and discuss why the widely-used radiative conductivity exponent ($\alpha$=-3/4) might not be adequate in general, as hinted by previous studies.

Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.

In this paper we present visible range light curves of the irregular Uranian satellites Sycorax, Caliban, Prospero, Ferdinand and Setebos taken with Kepler Space Telescope in the course of the K2 mission. Thermal emission measurements obtained with the Herschel/PACS and Spitzer/MIPS instruments of Sycorax and Caliban were also analysed and used to determine size, albedo and surface characteristics of these bodies. We compare these properties with the rotational and surface characteristics of irregular satellites in other giant planet systems and also with those of main belt and Trojan asteroids and trans-Neptunian objects. Our results indicate that the Uranian irregular satellite system likely went through a more intense collisional evolution than the irregular satellites of Jupiter and Saturn. Surface characteristics of Uranian irregular satellites seems to resemble the Centaurs and trans-Neptunian objects more than irregular satellites around other giant planets, suggesting the existence of a compositional discontinuity in the young Solar system inside the orbit of Uranus.

Astrophysics lies at the crossroads of big datasets (such as the Large Synoptic Survey Telescope and Gaia), open source software to visualize and interpret high dimensional datasets (such as Glue, WorldWide Telescope, and OpenSpace), and uniquely skilled software engineers who bridge data science and research fields. At the same time, more than 4,000 planetariums across the globe immerse millions of visitors in scientific data. We have identified the potential for critical synergy across data, software, hardware, locations, and content that -- if prioritized over the next decade -- will drive discovery in astronomical research. Planetariums can and should be used for the advancement of scientific research. Current facilities such as the Hayden Planetarium in New York City, Adler Planetarium in Chicago, Morrison Planetarium in San Francisco, the Iziko Planetarium and Digital Dome Research Consortium in Cape Town, and Visualization Center C in Norrkoping are already developing software which ingests catalogs of astronomical and multi-disciplinary data critical for exploration research primarily for the purpose of creating scientific storylines for the general public. We propose a transformative model whereby scientists become the audience and explorers in planetariums, utilizing software for their own investigative purposes. In this manner, research benefits from the authentic and unique experience of data immersion contained in an environment bathed in context and equipped for collaboration. Consequently, in this white paper we argue that over the next decade the research astronomy community should partner with planetariums to create visualization-based research opportunities for the field. Realizing this vision will require new investments in software and human capital.

The thermal emission of transneptunian objects (TNO) and Centaurs has been observed at mid- and far-infrared wavelengths - with the biggest contributions coming from the Spitzer and Herschel space observatories-, and the brightest ones also at sub-millimeter and millimeter wavelengths. These measurements allowed to determine the sizes and albedos for almost 180 objects, and densities for about 25 multiple systems. The derived very low thermal inertias show evidence for a decrease at large heliocentric distances and for high-albedo objects, which indicates porous and low-conductivity surfaces. The radio emissivity was found to be low ($\epsilon_r$=0.70$\pm$0.13) with possible spectral variations in a few cases. The general increase of density with object size points to different formation locations or times. The mean albedos increase from about 5-6% (Centaurs, Scattered-Disk Objects) to 15% for the Detached objects, with distinct cumulative albedo distributions for hot and cold classicals. The color-albedo separation in our sample is evidence for a compositional discontinuity in the young Solar System. The median albedo of the sample (excluding dwarf planets and the Haumea family) is 0.08, the albedo of Haumea family members is close to 0.5, best explained by the presence of water ice. The existing thermal measurements remain a treasure trove at times where the far-infrared regime is observationally not accessible.

Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM). Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotation period. Methods. To decrease the bias against slow rotators, we conducted a photometric observing campaign of main-belt asteroids with periods longer than 12 hours, from multiple stations worldwide, adding in some cases data from WISE and Kepler space telescopes. For spin and shape reconstruction we used the lightcurve inversion method, and to derive thermal inertias we applied a thermophysical model to fit available infrared data from IRAS, AKARI, and WISE. Results. We present new models of 11 slow rotators that provide a good fit to the thermal data. In two cases, the TPM analysis showed a clear preference for one of the two possible mirror solutions. We derived the diameters and albedos of our targets in addition to their thermal inertias, which ranged between 3$^{+33}_{-3}$ and 45$^{+60}_{-30}$ Jm$^{-2}$s$^{-1/2}$K$^{-1}$. Conclusions. Together with our previous work, we have analysed 16 slow rotators from our dense survey with sizes between 30 and 150 km. The current sample thermal inertias vary widely, which does not confirm the earlier suggestion that slower rotators have higher thermal inertias.

Of the nine confirmed transiting circumbinary planet systems, only Kepler-47 is known to contain more than one planet. Kepler-47 b (the "inner planet") has an orbital period of 49.5 days and a radius of about $3\,R_{\oplus}$. Kepler-47 c (the "outer planet") has an orbital period of 303.2 days and a radius of about $4.7\,R_{\oplus}$. Here we report the discovery of a third planet, Kepler-47 d (the "middle planet"), which has an orbital period of 187.4 days and a radius of about $7\,R_{\oplus}$. The presence of the middle planet allows us to place much better constraints on the masses of all three planets, where the $1\sigma$ ranges are less than $26\,M_{\oplus}$, between $7-43\,M_{\oplus}$, and between $2-5\,M_{\oplus}$ for the inner, middle, and outer planets, respectively. The middle and outer planets have low bulk densities, with $\rho_{\rm middle} < 0.68$ g cm$^{-3}$ and $\rho_{\rm outer} < 0.26$ g cm$^{-3}$ at the $1\sigma$ level. The two outer planets are "tightly packed," assuming the nominal masses, meaning no other planet could stably orbit between them. All of the orbits have low eccentricities and are nearly coplanar, disfavoring violent scattering scenarios and suggesting gentle migration in the protoplanetary disk.

A group of trans-Neptunian objects (TNO) are dynamically related to the dwarf planet 136108 Haumea. Ten of them show strong indications of water ice on their surfaces, are assumed to have resulted from a collision, and are accepted as the only known TNO collisional family. Nineteen other dynamically similar objects lack water ice absorptions and are hypothesized to be dynamical interlopers. We have made observations to determine sizes and geometric albedos of six of the accepted Haumea family members and one dynamical interloper. Ten other dynamical interlopers have been measured by previous works. We compare the individual and statistical properties of the family members and interlopers, examining the size and albedo distributions of both groups. We also examine implications for the total mass of the family and their ejection velocities. We use far-infrared space-based telescopes to observe the target TNOs near their thermal peak and combine these data with optical magnitudes to derive sizes and albedos using radiometric techniques. We determine the power-law slope of ejection velocity as a function of effective diameter. The detected Haumea family members have a diversity of geometric albedos $\sim$ 0.3-0.8, which are higher than geometric albedos of dynamically similar objects without water ice. The median geometric albedo for accepted family members is $p_V=0.48_{-0.18}^{+0.28}$, compared to 0.08$_{-0.05}^{+0.07}$ for the dynamical interlopers. In the size range $D=175-300$ km, the slope of the cumulative size distribution is $q$=3.2$_{-0.4}^{+0.7}$ for accepted family members, steeper than the $q$=2.0$\pm$0.6 slope for the dynamical interlopers with D$< $500 km. The total mass of Haumea's moons and family members is 2.4% of Haumea's mass. The ejection velocities required to emplace them on their current orbits show a dependence on diameter, with a power-law slope of 0.21-0.50.

The mid-infrared (mid-IR) wavelength regime offers several advantages for following the late-time evolution of supernovae (SNe). First, the peaks of the SN spectral energy distributions shift toward longer wavelengths following the photospheric phase. Second, mid-IR observations suffer less from effects of interstellar extinction. Third, and perhaps most important, the mid-IR traces dust formation and circumstellar interaction at late-times (>100 days) after the radioactive ejecta component fades. The Spitzer Space Telescope has provided substantial mid-IR observations of SNe since its launch in 2003. More than 200 SNe have been targeted, but there are even more SNe that have been observed serendipitously. Here we present the results of a comprehensive study based on archival Spitzer/IRAC images of more than 1100 SN positions; from this sample, 119 SNe of various subclasses have been detected, including 45 SNe with previously unpublished mid-IR photometry. The photometry reveal significant amounts of warm dust in some cases. We perform an in-depth analysis to constrain the origin and heating mechanism of the dust, and present the resulting statistics.

A recent occultation measurement of the dwarf planet Haumea (Ortiz et al. 2017) revealed an elongated shape with the longest axis comparable to Pluto's mean diameter. The chords also indicate a ring around Haumea's equatorial plane, where its largest moon, Hi'iaka, is also located. The Haumea occultation size estimate (equivalent diameter 1595 km) is larger than previous radiometric solutions (in the range between 1150 and 1350 km), which lowers the object's density to about 1.8 gcm-3, a value closer to the densities of other large TNOs. We present unpublished and also reprocessed Herschel and Spitzer MIR and FIR measurements. We compare 100 and 160um thermal lightcurve amplitudes - originating from Haumea itself - with models of the total measured system fluxes (ring, satellite, Haumea) from 24-350um. The combination with results derived from the occultation measurements show that Haumea's crystalline water ice surface must have a thermal inertia of ~5 SIu. We also have indications that the satellites (at least Hi'iaka) must have high geometric albedos >=0.5, otherwise the derived thermal amplitude would be inconsistent with the total measured system fluxes at 24, 70, 100, 160, 250, and 350um. The high albedos imply sizes of about 300 and 150 km for Hi'iaka and Namaka, respectively, indicating unexpectedly high densities >1.0 gcm-3 for TNOs this small, and the assumed collisional formation from Haumea's icy crust. We also estimated the thermal emission of the ring for the time period 1980-2030, showing that the contribution during the Spitzer and Herschel epochs was small, but not negligible. Due to the progressive opening of the ring plane, the ring emission will be increasing in the next decade when JWST is operational. In the MIRI 25.5um band it will also be possible to obtain a very high-quality thermal lightcurve to test the derived Haumea properties.

Faint star-forming galaxies at $z\sim 2-3$ can be used as alternative background sources to probe the Lyman-$\alpha$ forest in addition to quasars, yielding high sightline densities that enable 3D tomographic reconstruction of the foreground absorption field. Here, we present the first data release from the COSMOS Lyman-Alpha Mapping And Mapping Observations (CLAMATO) Survey, which was conducted with the LRIS spectrograph on the Keck-I telescope. Over an observational footprint of 0.157$\mathrm{deg}^2$ within the COSMOS field, we used 240 galaxies and quasars at $2.17<z<3.00$, with a mean comoving transverse separation of $2.37\,h^{-1}\,\mathrm{Mpc^3}$, as background sources probing the foreground Lyman-$\alpha$ forest absorption at $2.05<z<2.55$. The Lyman-$\alpha$ forest data was then used to create a Wiener-filtered tomographic reconstruction over a comoving volume of $3.15\,\times 10^5\,h^{-3}\,\mathrm{Mpc^3}$ with an effective smoothing scale of $2.5\,h^{-1}\,\mathrm{Mpc}$. In addition to traditional figures, this map is also presented as a virtual-reality YouTube360 video visualization and manipulable interactive figure. We see large overdensities and underdensities that visually agree with the distribution of coeval galaxies from spectroscopic redshift surveys in the same field, including overdensities associated with several recently-discovered galaxy protoclusters in the volume. This data release includes the redshift catalog, reduced spectra, extracted Lyman-$\alpha$ forest pixel data, and tomographic map of the absorption.

Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.

We present the results from an analysis of deep Herschel Space Observatory observations of six nearby dwarf galaxies known to host galactic-scale winds. The superior far-infrared sensitivity and angular resolution of Herschel have allowed detection of cold circumgalactic dust features beyond the stellar components of the host galaxies traced by Spitzer 4.5 $\mu$m images. Comparisons of these cold dust features with ancillary data reveal an imperfect spatial correlation with the ionized gas and warm dust wind components. We find that typically $\sim$10-20\% of the total dust mass in these galaxies resides outside of their stellar disks, but this fraction reaches $\sim$60\% in the case of NGC 1569. This galaxy also has the largest metallicity (O/H) deficit in our sample for its stellar mass. Overall, the small number of objects in our sample precludes drawing strong conclusions on the origin of the circumgalactic dust. We detect no statistically significant trends with star formation properties of the host galaxies, as might be expected if the dust were lifted above the disk by energy inputs from on-going star formation activity. Although a case for dust entrained in a galactic wind is seen in NGC 1569, in all cases, we cannot rule out the possibility that some of the circumgalactic dust might be associated instead with gas accreted or removed from the disk by recent galaxy interaction events, or that it is part of the outer gas-rich portion of the disk that lies below the sensitivity limit of the Spitzer 4.5 $\mu$m data.

The AKARI IRC All-sky survey provided more than twenty thousand thermal infrared observations of over five thousand asteroids. Diameters and albedos were obtained by fitting an empirically calibrated version of the standard thermal model to these data. After the publication of the flux catalogue in October 2016, our aim here is to present the AKARI IRC all-sky survey data and discuss valuable scientific applications in the field of small-body physical properties studies. As an example, we update the catalogue of asteroid diameters and albedos based on AKARI using the near-Earth asteroid thermal model (NEATM). We fit the NEATM to derive asteroid diameters and, whenever possible, infrared beaming parameters. We obtained a total of 8097 diameters and albedos for 5170 asteroids, and we fitted the beaming parameter for almost two thousand of them. When it was not possible to fit the beaming parameter, we used a straight line fit to our sample's beaming parameter-versus-phase angle plot to set the default value for each fit individually instead of using a single average value. Our diameters agree with stellar-occultation-based diameters well within the accuracy expected for the model. They also match the previous AKARI-based catalogue at phase angles lower than 50 degrees, but we find a systematic deviation at higher phase angles, at which near-Earth and Mars-crossing asteroids were observed. The AKARI IRC All-sky survey provides observations at different observation geometries, rotational coverages and aspect angles. For example, by comparing in more detail a few asteroids for which dimensions were derived from occultations, we discuss how the multiple observations per object may already provide three-dimensional information about elongated objects even based on an idealised model like the NEATM.

The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too. To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large and varied, we performed spin and shape modelling with two different methods. We used the convex inversion method and the non-convex SAGE algorithm, applied on the same datasets of dense lightcurves. Unlike convex inversion, the SAGE method allows for the existence of valleys and indentations on the shapes based only on lightcurves. We obtained detailed spin and shape models for the first five targets of our sample: (159) Aemilia, (227) Philosophia, (329) Svea, (478) Tergeste, and (487) Venetia. When compared to stellar occultation chords, our models obtained an absolute size scale and major topographic features of the shape models were also confirmed. When applied to thermophysical modelling, they provided a very good fit to the infrared data and allowed their size, albedo, and thermal inertia to be determined. Convex and non-convex shape models provide comparable fits to lightcurves. However, some non-convex models fit notably better to stellar occultation chords and to infrared data in sophisticated thermophysical modelling (TPM). In some cases TPM showed strong preference for one of the spin and shape solutions. Also, we confirmed that slowly rotating asteroids tend to have higher-than-average values of thermal inertia.

The combination of visible and thermal data from the ground and astrophysics space missions is key to improving the scientific understanding of near-Earth, main-belt, trojans, centaurs, and trans-Neptunian objects. To get full information on a small sample of selected bodies we combine different methods and techniques: lightcurve inversion, stellar occultations, thermophysical modeling, radiometric methods, radar ranging and adaptive optics imaging. The SBNAF project will derive size, spin and shape, thermal inertia, surface roughness, and in some cases bulk densities and even internal structure and composition, for objects out to the most distant regions in the Solar System. The applications to objects with ground-truth information allows us to advance the techniques beyond the current state-of-the-art and to assess the limitations of each method. We present results from our project's first phase: the analysis of combined Herschel-KeplerK2 data and Herschel-occultation data for TNOs; synergy studies on large MBAs from combined high-quality visual and thermal data; establishment of well-known asteroids as celestial calibrators for far-infrared, sub-millimetre, and millimetre projects; first results on near-Earth asteroids properties from combined lightcurve, radar and thermal measurements, as well as the Hayabusa-2 mission target characterisation. We also introduce public web-services and tools for studies of small bodies in general.

The sensitivity of ALMA makes it possible to detect thermal mm/submm emission from small/distant Solar System bodies at the sub-mJy level. Measured fluxes are primarily sensitive to the objects' diameters, but deriving precise sizes is somewhat hampered by the uncertain effective emissivity at these wavelengths. Following Brown and Butler (2017) who presented ALMA data for four binary TNOs, we report ALMA 1.29 mm measurements of four Centaurs (2002 GZ$_{32}$, Bienor, Chiron, Chariklo) and two TNOs (Huya and Makemake), sampling a range of size, albedo and composition. These thermal fluxes are combined with mid/far-infrared fluxes to derive the relative emissivity at radio (mm/submm) wavelengths, using NEATM and thermophysical models. We reassess earlier thermal measurements of these and other objects -- including Pluto/Charon and Varuna -- exploring effects due to non-spherical shape and varying apparent pole orientation, and show that those can be key for reconciling previous diameter determinations and correctly estimating the spectral emissivities. We also evaluate the possible contribution to thermal fluxes of established (Chariklo) or claimed (Chiron) ring systems. As a general conclusion, all the objects, except Makemake, have radio emissivities significantly lower than unity. Although the emissivity values show diversity, we do not find any significant trend with physical parameters such as diameter, composition, beaming factor, albedo, or color, but we suggest that the emissivity could be correlated with grain size. The mean relative radio emissivity is found to be 0.70$\pm$0.13, a value that we recommend for the analysis of further mm/submm data.

Context. The high-angular-resolution capability of the new-generation ground-based adaptive-optics camera SPHERE at ESO VLT allows us to assess, for the very first time, the cratering record of medium-sized (D~100-200 km) asteroids from the ground, opening the prospect of a new era of investigation of the asteroid belt's collisional history. Aims. We investigate here the collisional history of asteroid (6) Hebe and challenge the idea that Hebe may be the parent body of ordinary H chondrites, the most common type of meteorites found on Earth (~34% of the falls). Methods. We observed Hebe with SPHERE as part of the science verification of the instrument. Combined with earlier adaptive-optics images and optical light curves, we model the spin and three-dimensional (3D) shape of Hebe and check the consistency of the derived model against available stellar occultations and thermal measurements. Results. Our 3D shape model fits the images with sub-pixel residuals and the light curves to 0.02 mag. The rotation period (7.274 47 h), spin (343 deg,+47 deg), and volume-equivalent diameter (193 +/- 6km) are consistent with previous determinations and thermophysical modeling. Hebe's inferred density is 3.48 +/- 0.64 g.cm-3 , in agreement with an intact interior based on its H-chondrite composition. Using the 3D shape model to derive the volume of the largest depression (likely impact crater), it appears that the latter is significantly smaller than the total volume of close-by S-type H-chondrite-like asteroid families. Conclusions. Our results imply that (6) Hebe is not the most likely source of H chondrites. Over the coming years, our team will collect similar high-precision shape measurements with VLT/SPHERE for ~40 asteroids covering the main compositional classes, thus providing an unprecedented dataset to investigate the origin and collisional evolution of the asteroid belt.

Core-collapse supernova explosions expose the structure and environment of massive stars at the moment of their death. We use the global fitting technique of Pejcha & Prieto (2015a,b) to estimate a set of physical parameters of 19 normal Type II SNe, such as their distance moduli, reddenings, $^{56}$Ni masses $M_{\rm Ni}$, and explosion energies $E_{\rm exp}$ from multicolor light curves and photospheric velocity curves. We confirm and characterize known correlations between $M_{\rm Ni}$ and bolometric luminosity at 50 days after the explosion, and between $M_{\rm Ni}$ and $E_{\rm exp}$. We pay special attention to the observed distribution of $M_{\rm Ni}$ coming from a joint sample of 38 Type~II SNe, which can be described as a skewed-Gaussian-like distribution between $0.005~M_{\odot}$ and $0.280~M_{\odot}$, with a median of $0.031~M_{\odot}$, mean of $0.046~M_{\odot}$, standard deviation of $0.048~M_{\odot}$ and skewness of $3.050$. We use two-sample Kolmogorov-Smirnov test and two-sample Anderson-Darling test to compare the observed distribution of $M_{\rm Ni}$ to results from theoretical hydrodynamical codes of core-collapse explosions with the neutrino mechanism presented in the literature. Our results show that the theoretical distributions obtained from the codes tested in this work, KEPLER and Prometheus Hot Bubble, are compatible with the observations irrespective of different pre-supernova calibrations and different maximum mass of the progenitors.

2007OR10 is currently the third largest known dwarf planet in the transneptunian region, with an effective radiometric diameter of ~1535 km. It has a slow rotation period of ~45 h that was suspected to be caused by tidal interactions with a satellite undetected at that time. Here we report on the discovery of a likely moon of 2007OR10, identified on archival Hubble Space Telescope WFC3/UVIS system images. Although the satellite is detected at two epochs, this does not allow an unambiguous determination of the orbit and the orbital period. A feasible 1.5-5.8x10^21 kg estimate for the system mass leads to a likely 35 to 100 d orbital period. The moon is about 4.2m fainter than 2007OR10 in HST images that corresponds to a diameter of 237 km assuming equal albedos with the primary. Due to the relatively small size of the moon the previous size and albedo estimates for the primary remains unchanged. With this discovery all trans-Neptunian objects larger than 1000 km are now known to harbour satellites, an important constraint for moon formation theories in the young Solar system.

The JAXA Hayabusa-2 mission was approved in 2010 and launched on December 3, 2014. The spacecraft will arrive at the near-Earth asteroid 162173 Ryugu in 2018 where it will perform a survey, land and obtain surface material, then depart in Dec 2019 and return to Earth in Dec 2020. We observed Ryugu with the Herschel Space Observatory in Apr 2012 at far-IR thermal wavelengths, supported by several ground-based observations to obtain optical lightcurves. We reanalysed previously published Subaru-COMICS and AKARI-IRC observations and merged them with a Spitzer-IRS data set. In addition, we used a large set of Spitzer-IRAC observations obtained in the period Jan to May, 2013. The data set includes two complete rotational lightcurves and a series of ten "point-and-shoot" observations. The almost spherical shape of the target together with the insufficient lightcurve quality forced us to combine radiometric and lightcurve inversion techniques in different ways to find the object's key physical and thermal parameters. We find that the solution which best matches our data sets leads to this C class asteroid having a retrograde rotation with a spin-axis orientation of (lambda = 310-340 deg; beta = -40+/-15 deg) in ecliptic coordinates, an effective diameter (of an equal-volume sphere) of 850 to 880 m, a geometric albedo of 0.044 to 0.050 and a thermal inertia in the range 150 to 300 Jm-2s-0.5K-1. Based on estimated thermal conductivities of the top-layer surface in the range 0.1 to 0.6 WK-1m-1, we calculated that the grain sizes are approximately equal to between 1 and 10 mm. The finely constrained values for this asteroid serve as a `design reference model', which is currently used for various planning, operational and modelling purposes by the Hayabusa2 team.

A stellar occultation by a trans-Neptunian object (TNO) provides an opportunity to probe its size and shape. Very few occultations by TNOs have been sampled simultaneously from multiple locations, while a robust estimation of shadow size has been possible for only two objects. We present the first observation of an occultation by the TNO 2007 UK126 on 15 November 2014, measured by three observers, one nearly on and two almost symmetrical to the shadow's centerline. This is the first multi-chord dataset obtained for a so-called detached object, a TNO subgroup with perihelion distances so large that the giant planets have likely not perturbed their orbits. We revisit Herschel/PACS far-infrared data, applying a new reduction method to improve the accuracy of the measured fluxes. Combining both datasets allows us to comprehensively characterize 2007 UK126. We use error-in-variable regression to solve the non-linear problem of propagating timing errors into uncertainties of the ellipse parameters. Based on the shadow's size and a previously reported rotation period, we expect a shape of a Maclaurin spheroid and derive a geometrically plausible size range. To refine our size estimate of 2007 UK126, we model its thermal emission using a thermophysical model code. We conduct a parametric study to predict far-infrared fluxes and compare them to the Herschel/PACS measurements. The favorable geometry of our occultation chords, combined with minimal dead-time imaging, and precise GPS time measurements, allow for an accurate estimation of the shadow size (best-fitting ellipse with axes 645.80 $\pm$ 5.68 km $\times$ 597.81 $\pm$ 12.74 km) and the visual geometric albedo (15.0 $\pm$ 1.6 %). By combining our analyses of the occultation and the far-infrared data, we can constrain the effective diameter of 2007 UK126 to 599 - 629 km. We conclude that subsolar surface temperatures are $\approx$ 50 - 55 K.

The near-Earth asteroid (NEA) 2015 TB145 had a very close encounter with Earth at 1.3 lunar distances on October 31, 2015. We obtained 3-band mid-infrared observations with the ESO VLT-VISIR instrument and visual lightcurves during the close-encounter phase. The NEA has a (most likely) rotation period of 2.939 +/- 0.005 hours and the visual lightcurve shows a peak-to-peak amplitude of approximately 0.12+/-0.02 mag. We estimate a V-R colour of 0.56+/-0.05 mag from MPC database entries. Applying different phase relations to the available R-/V-band observations produced H_R = 18.6 mag (standard H-G calculations) or H_R = 19.2 mag & H_V = 19.8 mag (via the H-G12 procedure), with large uncertainties of approximately 1 mag. We performed a detailed thermophysical model analysis by using spherical and ellipsoidal shape models. The thermal properties are best explained by an equator-on (+/- ~30 deg) viewing geometry during our measurements with a thermal inertia in the range 250-700 Jm-2s-0.5K-1 (retrograde rotation) or above 500 Jm-2s-0.5K-1 (prograde rotation). We find that the NEA has a minimum size of 625 m, a maximum size of just below 700 m, and a slightly elongated shape with a/b ~1.1. The best match to all thermal measurements is found for: (i) Thermal inertia of 900 Jm-2s-0.5K-1; D_eff = 644 m, p_V = 5.5% (prograde rotation); regolith grain sizes of ~50-100 mm; (ii) thermal inertia of 400 Jm-2s-0.5K-1; D_eff = 667 m, p_V = 5.1% (retrograde rotation); regolith grain sizes of ~10-20 mm. A near-Earth asteroid model (NEATM) confirms an object size well above 600 m, significantly larger than early estimates based on radar measurements. We give recommendations for improved observing strategies for similar events in the future.

We present the first comprehensive thermal and rotational analysis of the second most distant trans-Neptunian object (225088) 2007 OR10. We combined optical light curves provided by the Kepler space telescope -- K2 extended mission and thermal infrared data provided by the Herschel Space Observatory. We found that (225088) 2007 OR10 is likely to be larger and darker than derived by earlier studies: we obtained a diameter of d=1535^{+75}_{-225} km which places (225088) 2007 OR10 in the biggest top three trans-Neptunian objects. The corresponding visual geometric albedo is p_V=0.089^{+0.031}_{-0.009}. The light curve analysis revealed a slow rotation rate of P_rot=44.81+/-0.37 h, superseded by a very few objects only. The most likely light-curve solution is double-peaked with a slight asymmetry, however, we cannot safely rule out the possibility of having a rotation period of P_rot=22.40+/-0.18 h which corresponds to a single-peaked solution. Due to the size and slow rotation, the shape of the object should be a MacLaurin ellipsoid, so the light variation should be caused by surface inhomogeneities. Its newly derived larger diameter also implies larger surface gravity and a more likely retention of volatiles -- CH_4, CO and N_2 -- on the surface.

We present all Herschel PACS photometer observations of Mars, Saturn, Uranus, Neptune, Callisto, Ganymede, and Titan. All measurements were carefully inspected for quality problems, were reduced in a (semi-)standard way, and were calibrated. The derived flux densities are tied to the standard PACS photometer response calibration, which is based on repeated measurements of five fiducial stars. The overall absolute flux uncertainty is dominated by the estimated 5% model uncertainty of the stellar models in the PACS wavelength range between 60 and 210 micron. A comparison with the corresponding planet and satellite models shows excellent agreement for Uranus, Neptune, and Titan, well within the specified 5%. Callisto is brighter than our model predictions by about 4-8%, Ganymede by about 14-21%. We discuss possible reasons for the model offsets. The measurements of these very bright point-like sources, together with observations of stars and asteroids, show the high reliability of the PACS photometer observations and the linear behavior of the PACS bolometer source fluxes over more than four orders of magnitude (from mJy levels up to more than 1000 Jy). Our results show the great potential of using the observed solar system targets for cross-calibration purposes with other ground-based, airborne, and space-based instruments and projects. At the same time, the PACS results will lead to improved model solutions for future calibration applications.

Thermal observations of the Pluto-Charon system acquired by the Herschel Space Observatory in February 2012 are presented. They consist of photometric measurements with the PACS and SPIRE instruments (nine visits to the Pluto system each), covering six wavelengths from 70 to 500 $\mu$m altogether. The thermal light curve of Pluto-Charon is observed in all filters, albeit more marginally at 160 and especially 500 $\mu$m. Putting these data into the context of older ISO, Spitzer and ground-based observations indicates that the brightness temperature (T$_B$) of the system (rescaled to a common heliocentric distance) drastically decreases with increasing wavelength, from $\sim$53 K at 20 $\mu$m to $\sim$35 K at 500 $\mu$m, and perhaps ever less at longer wavelengths. Considering a variety of diurnal and/or seasonal thermophysical models, we show that T$_B$ values of 35 K are lower than any expected temperature for the dayside surface or subsurface of Pluto and Charon, implying a low surface emissivity. Based on multiterrain modeling, we infer a spectral emissivity that decreases steadily from 1 at 20-25 $\mu$m to $\sim$0.7 at 500~$\mu$m. This kind of behavior is usually not observed in asteroids (when proper allowance is made for subsurface sounding), but is found in several icy surfaces of the solar system. We tentatively identify that a combination of a strong dielectric constant and a considerable surface material transparency (typical penetration depth $\sim$1 cm) is responsible for the effect. Our results have implications for the interpretation of the temperature measurements by REX/New Horizons at 4.2 cm wavelength.

In this paper we investigate the opportunities provided by the James Webb Space Telescope (JWST) for significant scientific advances in the study of solar system bodies and rings using stellar occultations. The strengths and weaknesses of the stellar occultation technique are evaluated in light of JWST's unique capabilities. We identify several possible JWST occultation events by minor bodies and rings, and evaluate their potential scientific value. These predictions depend critically on accurate a priori knowledge of the orbit of JWST near the Sun-Earth Lagrange-point 2 (L2). We also explore the possibility of serendipitous stellar occultations by very small minor bodies as a by-product of other JWST observing programs. Finally, to optimize the potential scientific return of stellar occultation observations, we identify several characteristics of JWST's orbit and instrumentation that should be taken into account during JWST's development.

The potentially hazardous asteroid (PHA) (99942) Apophis is one of the most remarkable near-Earth asteroids (NEA) in terms of impact hazard. A good determination of its surface thermal inertia is very important in order to evaluate the Yarkovsky effect on its orbital evolution. We present thermal infrared observations obtained on January 29, 2013, with CanariCam mid-infrared camera/spectrograph attached to the Gran Telescopio CANARIAS (GTC, Roque de los Muchachos Observatory, La Palma, Spain) using the Si2-8.7, Si6-12.5, and Q1-17.65 filters with the aim of deriving Apophis' diameter ($D$), geometric albedo ($p_V$), and thermal inertia ($\Gamma$). We performed a detailed thermophysical model analysis of the GTC data combined with previously published thermal data obtained using Herschel Space Observatory PACS instrument at 70, 100, and 160 $\mu$m.The thermophysical model fit of the data favors low surface roughness solutions (within a range of roughness slope angles $rms$ between 0.1 and 0.5), and constrains the effective diameter, visible geometric albedo, and thermal inertia of Apophis to be $D_{eff} =$~380 -- 393 m, $p_V = $~0.24--0.33 (assuming absolute magnitude $H = 19.09 \pm 0.19$) and $\Gamma =$~50 -- 500 Jm$^{-2}$ s$^{-0.5}$ K$^{-1}$, respectively.

We present estimates of the basic physical properties -- including size and albedo -- of the extreme Centaur 2013 AZ60. These properties have been derived from optical and thermal infrared measurements. Our optical measurements revealed a likely full period of ~9.4 h with a shallow amplitude of 4.5%. By combining optical brightness information and thermal emission data, we are able to derive a diameter of 62.3 +/- 5.3 km and a geometric albedo of 2.9% -- corresponding to an extremely dark surface. Additionally, our finding of ~> 50 Jm^{-2}K^{-1}s^{-1/2} for the thermal inertia is also noticeably for objects in such a distance. The results of dynamical simulations yield an unstable orbit, with a 50% probability that the target will be ejected from the Solar System within 700,000 years. The current orbit of this object as well as its instability could imply a pristine cometary surface. This possibility is in agreement with the observed low geometric albedo and red photometric colour indices for the object, which are a good match for the surface of a dormant comet -- as would be expected for a long-period cometary body approaching perihelion. Despite the fact it was approaching ever closer to the Sun, however, the object exhibited star-like profiles in each of our observations, lacking any sign of cometary activity. By the albedo, 2013 AZ60 is a candidate for the darkest body among the known TNOs.

We present a detailed analysis of deep far-infrared observations of the nearby edge-on star-forming galaxy NGC 4631 obtained with the Herschel Space Observatory. Our PACS images at 70 and 160 um show a rich complex of filaments and chimney-like features that extends up to a projected distance of 6 kpc above the plane of the galaxy. The PACS features often match extraplanar Halpha, radio-continuum, and soft X-ray features observed in this galaxy, pointing to a tight disk-halo connection regulated by star formation. On the other hand, the morphology of the colder dust component detected on larger scale in the SPIRE 250, 350, and 500 um data matches the extraplanar H~I streams previously reported in NGC 4631 and suggests a tidal origin. The PACS 70/160 ratios are elevated in the central ~3.0 kpc region above the nucleus of this galaxy (the "superbubble"). A pixel-by-pixel analysis shows that dust in this region has a higher temperature and/or an emissivity with a steeper spectral index (beta > 2) than the dust in the disk, possibly the result of the harsher environment in the superbubble. Star formation in the disk seems energetically insufficient to lift the material out of the disk, unless it was more active in the past or the dust-to-gas ratio in the superbubble region is higher than the Galactic value. Some of the dust in the halo may also have been tidally stripped from nearby companions or lifted from the disk by galaxy interactions.

The thermal emission of comet C/2013 A1 (Siding Spring) was observed on March 31, 2013, at a heliocentric distance of 6.48 au using the PACS photometer camera of the Herschel Space Observatory. The comet was clearly active, showing a coma that could be traced to a distance of 10", i.e. 50000 km. Analysis of the radial intensity profiles of the coma provided dust mass and dust production rate; the derived grain size distribution characteristics indicate an overabundance of large grains in the thermal emission. We estimate that activity started about 6 months before these observations, at a heliocentric distance of 8 au.

We present the activities carried out to calibrate and characterise the performance of the elements of attitude control and measurement on board the Herschel spacecraft. The main calibration parameters and the evolution of the indicators of the pointing performance are described, from the initial values derived from the observations carried out in the performance verification phase to those attained in the last year and half of mission, an absolute pointing error around or even below 1 arcsec, a spatial relative pointing error of some 1 arcsec and a pointing stability below 0.2 arsec. The actions carried out at the ground segment to improve the spacecraft pointing measurements are outlined. On-going and future developments towards a final refinement of the Herschel astrometry are also summarised. A brief description of the different components of the attitude control and measurement system (both in the space and in the ground segments) is also given for reference. We stress the importance of the cooperation between the different actors (scientists, flight dynamics and systems engineers, attitude control and measurement hardware designers, star-tracker manufacturers, etc.) to attain the final level of performance.

The near-Earth asteroid (99942) Apophis is a potentially hazardous asteroid. We obtained far-infrared observations of this asteroid with the Herschel Space Observatory's PACS instrument at 70, 100, and 160 micron. These were taken at two epochs in January and March 2013 during a close Earth encounter. These first thermal measurements of Apophis were taken at similar phase angles before and after opposition. We performed a detailed thermophysical model analysis by using the spin and shape model recently derived from applying a 2-period Fourier series method to a large sample of well-calibrated photometric observations. We find that the tumbling asteroid Apophis has an elongated shape with a mean diameter of 375$^{+14}_{-10}$ m (of an equal volume sphere) and a geometric V-band albedo of 0.30$^{+0.05}_{-0.06}$. We find a thermal inertia in the range 250-800 Jm$^{-2}$s$^{-0.5}$K$^{-1}$ (best solution at 600 Jm$^{-2}$s$^{-0.5}$K$^{-1}$), which can be explained by a mixture of low conductivity fine regolith with larger rocks and boulders of high thermal inertia on the surface. The thermal inertia, and other similarities with (25143) Itokawa indicate that Apophis might also have a rubble-pile structure. If we combine the new size value with the assumption of an Itokawa-like density and porosity we estimate a mass between 4.4 and 6.2 10$^{10}$ kg which is more than 2-3 times larger than previous estimates. We expect that the newly derived properties will influence impact scenario studies and influence the long-term orbit predictions of Apophis.

The near-Earth asteroid (25143) Itokawa was characterised in great detail by the Japanese Hayabusa mission. We revisited the available thermal observations in the light of the true asteroid properties with the goal to evaluate the possibilities and limitations of thermal model techniques. In total, we used 25 published ground-based mid-infrared photometric observations and 5 so far unpublished measurements from the Japanese infrared astronomical satellite AKARI in combination with improved H-G values. Our thermophysical model (TPM) approach allowed us to determine correctly the sense of rotation, to estimate the thermal inertia and to derive robust effective size and albedo values by only using a simple spherical shape model. A more complex shape model, derived from light-curve inversion techniques, improved the quality of the predictions considerably and made the interpretation of thermal light-curve possible. The radiometrically derived effective diameter value agrees within 2% of the true Itokawa size value. The combination of our TPM and the final Itokawa in-situ shape model was then used as a benchmark for deriving and testing radiometric solutions. The consolidated value for the surface-averaged thermal inertia is 700 $\pm$ 200 Jm$^{-2}$s$^{-0.5}$K$^{-1}$. We found that even the high resolution shape models still require additional small-scale roughness in order to explain the disk-integrated infrared measurements. Our description of the thermal effects as a function of wavelengths, phase angle, and rotational phase facilitates the planning of crucial thermal observations for sophisticated characterization of small bodies, including other potentially hazardous asteroids. Our analysis shows the power of radiometric techniques to derive the size, albedo, thermal inertia, and also spin-axis orientation from small sets of measurements at thermal infrared wavelengths.

The classical Kuiper belt contains objects both from a low-inclination, presumably primordial, distribution and from a high-inclination dynamically excited population. Based on a sample of classical TNOs with observations at thermal wavelengths we determine radiometric sizes, geometric albedos and thermal beaming factors as well as study sample properties of dynamically hot and cold classicals. Observations near the thermal peak of TNOs using infra-red space telescopes are combined with optical magnitudes using the radiometric technique with near-Earth asteroid thermal model (NEATM). We have determined three-band flux densities from Herschel/PACS observations at 70.0, 100.0 and 160.0 $\mu$m and Spitzer/MIPS at 23.68 and 71.42 $\mu$m when available. We have analysed 18 classical TNOs with previously unpublished data and re-analysed previously published targets with updated data reduction to determine their sizes and geometric albedos as well as beaming factors when data quality allows. We have combined these samples with classical TNOs with radiometric results in the literature for the analysis of sample properties of a total of 44 objects. We find a median geometric albedo for cold classical TNOs of 0.14 and for dynamically hot classical TNOs, excluding the Haumea family and dwarf planets, 0.085. We have determined the bulk densities of Borasisi-Pabu (2.1 g/cm^3), Varda-Ilmare (1.25 g/cm^3) and 2001 QC298 (1.14 g/cm^3) as well as updated previous density estimates of four targets. We have determined the slope parameter of the debiased cumulative size distribution of dynamically hot classical TNOs as q=2.3 +- 0.1 in the diameter range 100<D<500 km. For dynamically cold classical TNOs we determine q=5.1 +- 1.1 in the diameter range 160<D<280 km as the cold classical TNOs have a smaller maximum size.

Transitional disks are protoplanetary disk around young stars that display inner holes in the dust distribution within a few AU, which is accompanied nevertheless by some gas accretion onto the central star. These cavities could possibly be created by the presence of one or more massive planets. If the gap is created by planets and gas is still present in it, then there should be a flow of gas past the planet into the inner region. It is our goal to study the mass accretion rate into the gap and in particular the dependency on the planet's mass and the thermodynamic properties of the disk. We performed 2D hydro simulations for disks with embedded planets. We added radiative cooling from the disk surfaces, radiative diffusion in the disk midplane, and stellar irradiation to the energy equation to have more realistic models. The mass flow rate into the gap region depends, for given disk thermodynamics, non-monotonically on the mass of the planet. Generally, more massive planets open wider and deeper gaps which would tend to reduce the mass accretion into the inner cavity. However, for larger mass planets the outer disk becomes eccentric and the mass flow rate is enhanced over the low mass cases. As a result, for the isothermal disks the mass flow is always comparable to the expected mass flow of unperturbed disks M_d, while for more realistic radiative disks the mass flow is very small for low mass planets (<= 4 M_jup) and about 50% for larger planet masses. For the radiative disks that critical planet mass for the disk to become eccentric is much larger that in the isothermal case. Massive embedded planets can reduce the mass flow across the gap considerably, to values of about an order of magnitude smaller than the standard disk accretion rate, and can be responsible for opening large cavities. The remaining mass flow into the central cavity is in good agreement with the observations.

Our goal was to characterize the distant gaseous and dust activity of comet C\2012 S1 (ISON), inbound, from observations of H2O, CO and the dust coma in the far-infrared and submillimeter domains. In this paper, we report observations undertaken with the Herschel Space Observatory on 8 & 13 March 2013 (rh = 4.54 - 4.47AU) and with the 30m telescope of Institut de Radioastronomie Millim\'etrique (IRAM) in March and April 2013 (rh = 4.45 - 4.18 AU). The HIFI instrument aboard Herschel was used to observe the H$_{2}$O $1_{10}-1_{01}$ line at 557 GHz, whereas images of the dust coma at 70 and 160 {\mu}m were acquired with the PACS instrument. Spectra acquired at the IRAM 30m telescope cover the CO J(2-1) line at 230.5 GHz. The spectral observations were analysed with excitation and radiative transfer models. A model of dust thermal emission taking into account a range of dust sizes is used to analyse the PACS maps. While H$_{2}$O was not detected in our 8 March 2013 observation, we derive a sensitive 3 $\sigma$ upper limit of QH$_{2}$O < 3.5 x 10$^{26}$ molecules/s for this date. A marginal 3.2 $\sigma$ detection of CO is found, corresponding to a CO production rate of QCO = 3.5 x 10$^{27}$ molecules/s. The Herschel PACS measurements show a clear detection of the coma and tail in both the 70 {\mu}m and 160 {\mu}m maps. Under the assumption of a 2 km radius nucleus, we infer dust production rates in the range 10 - 13 kg/s or 40 - 70 kg/s depending on whether a low or high gaseous activity from the nucleus surface is assumed. We constrain the size distribution of the emitted dust by comparing PACS 70 and 160 {\mu}m data, and considering optical data. Size indices between -4 and -3.6 are suggested. The morphology of the tail observed on 70 {\mu}m images can be explained by the presence of grains with ages older than 60 days.

The boloSource() algorithm is a tool to separate the signal of compact sources from that of the diffuse background in the timeline of far-infrared measurements performed by the PACS camera of the Herschel Space Observatory. An important characteristic and quality indicator of this method is that how well it can reproduce the flux of faint standard stars which have reliable flux estimates. For this propose we selected a few calibrator targets and constructed light curves by extracting point source flux for each repetition of the measurements independently using standard aperture photometry methods. These were compared with the light curves obtained using the boloSource() method on the same dataset. The results indicate that boloSource() provides a similar level of photometric accuracy and reproducibility as the usual flux extraction and photometry methods. This new technique will be developed further and also tested against other methods in more complex fields with the goal to make it usable for large-scale studies in the future.

The absolute stability of the PACS bolometer response over the entire mission lifetime without applying any corrections is about 0.5% (standard deviation) or about 8% peak-to-peak. This fantastic stability allows us to calibrate all scientific measurements by a fixed and time-independent response file, without using any information from the PACS internal calibration sources. However, the analysis of calibration block observations revealed clear correlations of the internal source signals with the evaporator temperature and a signal drift during the first half hour after the cooler recycling. These effects are small, but can be seen in repeated measurements of standard stars. From our analysis we established corrections for both effects which push the stability of the PACS bolometer response to about 0.2% (stdev) or 2% in the blue, 3% in the green and 5% in the red channel (peak-to-peak). After both corrections we still see a correlation of the signals with PACS FPU temperatures, possibly caused by parasitic heat influences via the Kevlar wires which connect the bolometers with the PACS Focal Plane Unit. No aging effect or degradation of the photometric system during the mission lifetime has been found.

This paper provides an overview of the PACS photometer flux calibration concept, in particular for the principal observation mode, the scan map. The absolute flux calibration is tied to the photospheric models of five fiducial stellar standards (alpha Boo, alpha Cet, alpha Tau, beta And, gamma Dra). The data processing steps to arrive at a consistent and homogeneous calibration are outlined. In the current state the relative photometric accuracy is around 2% in all bands. Starting from the present calibration status, the characterization and correction for instrumental effects affecting the relative calibration accuracy is described and an outlook for the final achievable calibration numbers is given. After including all the correction for the instrumental effects, the relative photometric calibration accuracy (repeatability) will be as good as 0.5% in the blue and green band and 2% in the red band. This excellent calibration starts to reveal possible inconsistencies between the models of the K-type and the M-type stellar calibrators. The absolute calibration accuracy is therefore mainly limited by the 5% uncertainty of the celestial standard models in all three bands. The PACS bolometer response was extremely stable over the entire Herschel mission and a single, time-independent response calibration file is sufficient for the processing and calibration of the science observations. The dedicated measurements of the internal calibration sources were needed only to characterize secondary effects. No aging effects of the bolometer or the filters have been found. Also, we found no signs of filter leaks. The PACS photometric system is very well characterized with a constant energy spectrum nu*Fnu = lambda*Flambda = const as a reference. Colour corrections for a wide range of sources SEDs are determined and tabulated.

The "TNOs are Cool!: A survey of the trans-Neptunian region" is a Herschel Open Time Key Program that aims to characterize planetary bodies at the outskirts of the Solar System using PACS and SPIRE data, mostly taken as scan-maps. In this paper we summarize our PACS data reduction scheme that uses a modified version of the standard pipeline for basic data reduction, optimized for faint, moving targets. Due to the low flux density of our targets the observations are confusion noise limited or at least often affected by bright nearby background sources at 100 and 160\,$\mu$m. To overcome these problems we developed techniques to characterize and eliminate the background at the positions of our targets and a background matching technique to compensate for pointing errors. We derive a variety of maps as science data products that are used depending on the source flux and background levels and the scientific purpose. Our techniques are also applicable to a wealth of other Herschel solar system photometric observations, e.g. comets and near-Earth asteroids. The principles of our observing strategies and reduction techniques for moving targets will also be applicable for similar surveys of future infrared space projects.

We present a flux calibration scheme for the PACS chopped point-source photometry observing mode based on the photometry of five stellar standard sources. This mode was used for science observations only early in the mission. Later, it was only used for pointing and flux calibration measurements. Its calibration turns this type of observation into fully validated data products in the Herschel Science Archive. Systematic differences in calibration with regard to the principal photometer observation mode, the scan map, are derived and amount to 5-6%. An empirical method to calibrate out an apparent response drift during the first 300 Operational Days is presented. The relative photometric calibration accuracy (repeatability) is as good as 1% in the blue and green band and up to 5% in the red band. Like for the scan map mode, inconsistencies among the stellar calibration models become visible and amount to 2% for the five standard stars used. The absolute calibration accuracy is therefore mainly limited by the model uncertainty, which is 5% for all three bands.

Transneptunian objects (TNOs) are bodies populating the Kuiper Belt and they are believed to retain the most pristine and least altered material of the solar system. The Herschel Open Time Key Program entitled "TNOs are Cool: A survey of the trans-Neptunian region" has been awarded 373 h to investigate the albedo, size distribution and thermal properties of TNOs and Centaurs. Here we focus on the brightest targets observed by both the PACS and SPIRE multiband photometers: the dwarf planet Haumea, six TNOs (Huya, Orcus, Quaoar, Salacia, 2002 UX25, and 2002 TC302), and two Centaurs (Chiron and Chariklo). Flux densities are derived from PACS and SPIRE instruments using optimised data reduction methods. The spectral energy distribution obtained with the Herschel PACS and SPIRE instruments over 6 bands (centred at 70, 100, 160, 250, 350, and 500 $\mu$m), and with Spitzer-MIPS at 23.7 and 71.4 $\mu$m has been modelled with the NEATM thermal model in order to derive the albedo, diameter, and beaming factor. For the Centaurs Chiron and Chariklo and for the 1000 km sized Orcus and Quaoar, a thermophysical model was also run to better constrain their thermal properties. We derive the size, albedo, and thermal properties, including thermal inertia and surface emissivity, for the 9 TNOs and Centaurs. Several targets show a significant decrease in their spectral emissivity longwards of $\sim$300 $\mu$m and especially at 500 $\mu$m. Using our size estimations and the mass values available in the literature, we also derive the bulk densities for the binaries Quaoar/Weywot (2.18$^{+0.43}_{-0.36}$ g/cm$^3$), Orcus/Vanth (1.53$^{+0.15}_{-0.13}$ g/cm$^3$), and Salacia/Actea (1.29$^{+0.29}_{-0.23}$ g/cm$^3$). Quaoar's density is similar to that of the other dwarf planets Pluto and Haumea, and its value implies high contents of refractory materials mixed with ices.

2012 DR30 is a recently discovered Solar System object on a unique orbit, with a high eccentricity of 0.9867, a perihelion distance of 14.54 AU and a semi-major axis of 1109 AU, in this respect outscoring the vast majority of trans-Neptunian objects. We performed Herschel/PACS and optical photometry to uncover the size and albedo of 2012 DR30, together with its thermal and surface properties. The body is 185 km in diameter and has a relatively low V-band geometric albedo of ~8%. Although the colours of the object indicate that 2012 DR30 is an RI taxonomy class TNO or Centaur, we detected an absorption feature in the Z-band that is uncommon among these bodies. A dynamical analysis of the target's orbit shows that 2012 DR30 moves on a relatively unstable orbit and was most likely only recently placed on its current orbit from the most distant and still highly unexplored regions of the Solar System. If categorised on dynamical grounds 2012 DR30 is the largest Damocloid and/or high inclination Centaur observed so far.

We have performed detailed thermophysical and dynamical modelling of Jovian Trojan (1173) Anchises. Our results reveal a most unusual object. By examining observational data taken by IRAS, Akari and WISE between 11.5 and 60 microns, along with variations in its optical lightcurve, we find Anchises is most likely an elongated body, with an axes-ratio of ~1.4. This yields calculated best-fit dimensions of 170x121x121km (an equivalent diameter of 136+18/-11km). We find the observations are best fit by Anchises having a retrograde sense of rotation, and an unusually high thermal inertia (25 to 100 Jm-2s-0.5K-1). The geometric albedo is found to be 0.027 (+0.006/-0.007). Anchises therefore has one of the highest published thermal inertias of any object larger than 100km in diameter, at such large heliocentric distances, and is one of the lowest albedo objects ever observed. More observations are needed to see if there is a link between the very shallow phase curve, with almost no opposition effect, and the derived thermal properties for this large Trojan asteroid. Our dynamical investigation of Anchises' orbit has revealed it to be dynamically unstable on timescales of hundreds of Myr, similar to the unstable Neptunian Trojans 2001 QR322 and 2008 LC18. Unlike those objects, we find that Anchises' dynamical stability is not a function of its initial orbital elements, the result of the exceptional precision with which its orbit is known. This is the first time that a Jovian Trojan has been shown to be dynamically unstable, and adds weight to the idea that planetary Trojans represent a significant ongoing contribution to the Centaur population, the parents of the short-period comets. The observed instability does not rule out a primordial origin for Anchises, but when taken in concert with the result of our thermophysical analysis, suggest that it would be a fascinating target for future study.

We present estimates of the basic physical properties (size and albedo) of (90377) Sedna, a prominent member of the detached trans-Neptunian object population and the recently discovered scattered disk object 2010 EK139, based on the recent observations acquired with the Herschel Space Observatory, within the "TNOs are Cool!" key programme. Our modeling of the thermal measurements shows that both objects have larger albedos and smaller sizes than the previous expectations, thus their surfaces might be covered by ices in a significantly larger fraction. The derived diameter of Sedna and 2010 EK139 are 995 +/- 80 km and 470 +35/-10 km, while the respective geometric albedos are pV 0.32 +/- 0.06 and 0.25 +0.02/-0.05. These estimates are based on thermophysical model techniques.

In 2D simulations of thin gaseous disks with embedded planets or self-gravity the gravitational potential needs to be smoothed to avoid singularities in the numerical evaluation of the gravitational potential or force. In order to correctly resemble the realistic case of vertically extended 3D disks the softening prescription used in 2D needs to be adjusted properly. In this paper we analyze the embedded planet and the self-gravity case and provide a method to evaluate the required smoothing in 2D simulations of thin disks. Starting from the averaged hydrodynamic equations and using a vertically isothermal disk model, we calculate the force. We compare our results to the often used Plummer form of the potential which runs as \propto 1/(r^2+\epsilon^2)^{1/2}. For that purpose we compute the required smoothing length \epsilon as a function of distance r to the planet or to a disk element within a self-gravitating disk. We find that for larger distances \epsilon is determined solely by the vertical disk thickness H. For the planet case we find that outside r\simH a value of \epsilon = 0.7H describes the averaged force very well, while in the self-gravitating disk the value needs to be larger, \epsilon = 1.2H. For smaller distances the smoothing needs to be reduced significantly. Comparing torque densities of 3D and 2D simulations we show that the modification to the vertical density stratification as induced by an embedded planet needs to be taken into account to obtain agreeing results. In disk fragmentation simulations the choice of \epsilon can determine whether a disk will fragment or not. Because a wrong smoothing length can change even the direction of migration, it is very important to include the effect of the planet on the local scale height in 2D planet-disk simulations. We provide an approximate and fast method for this purpose which gives very good agreement to full 3D simulations.

Trans-Neptunian objects (TNO) represent the leftovers of the formation of the Solar System. Their physical properties provide constraints to the models of formation and evolution of the various dynamical classes of objects in the outer Solar System. Based on a sample of 19 classical TNOs we determine radiometric sizes, geometric albedos and beaming parameters. Our sample is composed of both dynamically hot and cold classicals. We study the correlations of diameter and albedo of these two subsamples with each other and with orbital parameters, spectral slopes and colors. We have done three-band photometric observations with Herschel/PACS and we use a consistent method for data reduction and aperture photometry of this sample to obtain monochromatic flux densities at 70.0, 100.0 and 160.0 \mu m. Additionally, we use Spitzer/MIPS flux densities at 23.68 and 71.42 \mu m when available, and we present new Spitzer flux densities of eight targets. We derive diameters and albedos with the near-Earth asteroid thermal model (NEATM). As auxiliary data we use reexamined absolute visual magnitudes from the literature and data bases, part of which have been obtained by ground based programs in support of our Herschel key program. We have determined for the first time radiometric sizes and albedos of eight classical TNOs, and refined previous size and albedo estimates or limits of 11 other classicals. The new size estimates of 2002 MS4 and 120347 Salacia indicate that they are among the 10 largest TNOs known. Our new results confirm the recent findings that there are very diverse albedos among the classical TNOs and that cold classicals possess a high average albedo (0.17 +/- 0.04). Diameters of classical TNOs strongly correlate with orbital inclination in our sample. We also determine the bulk densities of six binary TNOs.

In this paper we study the evolution of viscous and radiative circumstellar disks under the influence of a companion star. We focus on the eccentric {\gamma} Cephei and {\alpha} Centauri system as examples and compare the disk quantities such as disk eccentricity and precession rate to previous isothermal simulations. We perform two-dimensional hydrodynamical simulations of the binary star systems under the assumption of coplanarity of the disk, host star and binary companion. We use the grid-based, staggered mesh code FARGO with an additional energy equation to which we added radiative cooling based on opacity tables. The eccentric binary companion perturbs the disk around the primary star periodically. Upon passing periastron spirals arms are induced that wind from the outer disk towards the star. In isothermal simulations this results in disk eccentricities up to {\epsilon}_disk ~ 0.2, but in more realistic radiative models we obtain much smaller eccentricities of about {\epsilon}_disk ~ 0.04 - 0.06 with no real precession. Models with varying viscosity and disk mass indicate show that disks with less mass have lower temperatures and higher disk eccentricity. The rather large high disk eccentricities, as indicated in previous isothermal disk simulations, implied a more difficult planet formation in the {\gamma} Cephei system due to the enhanced collision velocities of planetesimals. We have shown that under more realistic conditions with radiative cooling the disk become less eccentric and thus planet formation may be made easier. However, we estimate that the viscosity in the disk has to very small, with {\alpha} \lesssim 0.001, because otherwise the disk's lifetime will be too short to allow planet formation to occur along the core instability scenario. We estimate that the periodic heating of the disk in eccentric binaries will be observable in the mid-IR regime.

Physical characterization of Trans-Neptunian objects, a primitive population of the outer solar system, may provide constraints on their formation and evolution. The goal of this work is to characterize a set of 15 scattered disk (SDOs) and detached objects, in terms of their size, albedo, and thermal properties. Thermal flux measurements obtained with the Herschel-PACS instrument at 70, 100 and 160 \mu m, and whenever applicable, with Spitzer-MIPS at 24 and 70 \mu m, are modeled with radiometric techniques, in order to derive the objects' individual size, albedo and when possible beaming factor. Error bars are obtained from a Monte-Carlo approach. We look for correlations between these and other physical and orbital parameters. Diameters obtained for our sample range from 100 to 2400 km, and the geometric albedos (in V band) vary from 3.8 % to 84.5 %. The unweighted mean V geometric albedo for the whole sample is 11.2 % (excluding Eris); 6.9 % for the SDOs, and 17.0 % for the detached objects (excluding Eris). We obtain new bulk densities for three binary systems: Ceto/Phorcys, Typhon/Echidna and Eris/Dysnomia. Apart from correlations clearly due to observational bias, we find significant correlations between albedo and diameter (more reflective objects being bigger), and between albedo, diameter and perihelion distance (brighter and bigger objects having larger perihelia). We discuss possible explanations for these correlations.

We present a comparison of our results from ground-based observations of asteroid (21) Lutetia with imaging data acquired during the flyby of the asteroid by the ESA Rosetta mission. This flyby provided a unique opportunity to evaluate and calibrate our method of determination of size, 3-D shape, and spin of an asteroid from ground-based observations. We present our 3-D shape-modeling technique KOALA which is based on multi-dataset inversion. We compare the results we obtained with KOALA, prior to the flyby, on asteroid (21) Lutetia with the high-spatial resolution images of the asteroid taken with the OSIRIS camera on-board the ESA Rosetta spacecraft, during its encounter with Lutetia. The spin axis determined with KOALA was found to be accurate to within two degrees, while the KOALA diameter determinations were within 2% of the Rosetta-derived values. The 3-D shape of the KOALA model is also confirmed by the spectacular visual agreement between both 3-D shape models (KOALA pre- and OSIRIS post-flyby). We found a typical deviation of only 2 km at local scales between the profiles from KOALA predictions and OSIRIS images, resulting in a volume uncertainty provided by KOALA better than 10%. Radiometric techniques for the interpretation of thermal infrared data also benefit greatly from the KOALA shape model: the absolute size and geometric albedo can be derived with high accuracy, and thermal properties, for example the thermal inertia, can be determined unambiguously. We consider this to be a validation of the KOALA method. Because space exploration will remain limited to only a few objects, KOALA stands as a powerful technique to study a much larger set of small bodies using Earth-based observations.

Thermal emission from Kuiper Belt object (136108) Haumea was measured with Herschel-PACS at 100 and 160 micrometers for almost a full rotation period. Observations clearly indicate a 100-micrometer thermal lightcurve with an amplitude of a factor of ~ 2, which is positively correlated with the optical lightcurve. This confirms that both are primarily due to shape effects. A 160-micrometer lightcurve is marginally detected. Radiometric fits of the mean Herschel- and Spitzer- fluxes indicate an equivalent diameter D ~ 1300 km and a geometric albedo p_v ~ 0.70-0.75. These values agree with inferences from the optical lightcurve, supporting the hydrostatic equilibrium hypothesis. The large amplitude of the 100-micrometer lightcurve suggests that the object has a high projected a/b axis ratio (~ 1.3) and a low thermal inertia as well as possible variable infrared beaming. This may point to fine regolith on the surface, with a lunar-type photometric behavior. The quality of the thermal data is not sufficient to clearly detect the effects of a surface dark spot.

The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210\mu\ m wavelength regime. In photometry mode, it simultaneously images two bands, 60-85\mu\ m or 85-125\mu\m and 125-210\mu\ m, over a field of view of ~1.75'x3.5', with close to Nyquist beam sampling in each band. In spectroscopy mode, it images a field of 47"x47", resolved into 5x5 pixels, with an instantaneous spectral coverage of ~1500km/s and a spectral resolution of ~175km/s. We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the Performance Verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions.

(Abridged) The Long Wavelength Spectrometer (LWS) onboard the Infrared Space Observatory (ISO) observed the four large main-belt asteroids (1) Ceres, (2) Pallas, (4) Vesta, and (10) Hygiea multiple times. The photometric and spectroscopic data cover the wavelength range between 43 and 197 um, and are a unique dataset for future investigations and detailed characterisations of these bodies. The standard ISO archive products, produced through the last post-mission LWS pipeline, were still affected by instrument artefacts. Our goal was to provide the best possible data products to exploit the full scientific potential of these observations. We performed a refined reduction of all measurements, corrected for various instrumental effects, and re-calibrated the data. We outline the data reduction process and give an overview of the available data and the quality of the observations. We apply a thermophysical model to the flux measurements to derive far-IR based diameter and albedo values of the asteroids. The measured thermal rotational lightcurve of (4) Vesta is compared to model predictions. The absolute photometric accuracy of the data products was foubd to be better than 10%. The calibrated spectra will serve as source for future mineralogical studies of dwarf planets and dwarf planet candidates.

Sagittarius A*, the supermassive compact object at the center of the Galaxy, exhibits outbursts in the near infrared and X-ray domains. These flares are likely due to energetic events very close to the central object, on a scale of a few Schwarzschild radii. Optical interferometry will soon be able to provide astrometry with an accuracy of this order (~10 muas). In this article we use recent photometric near infrared data observed with the adaptive optics system NACO at the Very Large Telescope combined with simulations in order to deploy a method to test the nature of the flares and to predict the possible outcome of observations with the Very Large Telescope Interferometer. To accomplish this we implement a hot spot model and investigate its appearance for a remote observer in terms of light curves and centroid tracks, based on general relativistic ray tracing methods. First, we use a simplified model of a small steady source in order to investigate the relativistic effects qualitatively. A more realistic scenario is then being developed by fitting our model to existing flare data. While indications for the spin of the black hole and multiple images due to lensing effects are marginal in the light curves, astrometric measurements offer the possibility to reveal these high-order general relativistic effects. This study makes predictions on these astrometric measurements and leads us to the conclusion that future infrared interferometers will be able to detect proper motion of hot spots in the vicinity of Sagittarius A*.

The Far-Infrared Surveyor (FIS) is one of two focal plane instruments on the AKARI satellite. FIS has four photometric bands at 65, 90, 140, and 160 um, and uses two kinds of array detectors. The FIS arrays and optics are designed to sweep the sky with high spatial resolution and redundancy. The actual scan width is more than eight arcmin, and the pixel pitch is matches the diffraction limit of the telescope. Derived point spread functions (PSFs) from observations of asteroids are similar to the optical model. Significant excesses, however, are clearly seen around tails of the PSFs, whose contributions are about 30% of the total power. All FIS functions are operating well in orbit, and its performance meets the laboratory characterizations, except for the two longer wavelength bands, which are not performing as well as characterized. Furthermore, the FIS has a spectroscopic capability using a Fourier transform spectrometer (FTS). Because the FTS takes advantage of the optics and detectors of the photometer, it can simultaneously make a spectral map. This paper summarizes the in-flight technical and operational performance of the FIS.

(4) Vesta and (9) Metis are large main-belt asteroids with high albedos. With millimetre-observations at 93.0 and 95.5 GHz we characterised the emission properties of the surface material. The coverage of the full rotation period allowed a detailed study of the heterogeneity of the surface. The rotationally averaged fluxes are explained very well by our thermophysical model techniques when using an emissivity in the mm-range of about 0.6 for (4) Vesta and about 0.7 for (9) Metis. The mm-lightcurves follow for a large fraction of the rotation period the shape-introduced variations. The rotational phases with clear deviations are connected to structures which are visible in the HST images of (4) Vesta and the Keck AO-images of (9) Metis. The observed lightcurve amplitudes are peak-to-peak ~30% for (4) Vesta and ~25% for (9) Metis, while the shape-related amplitudes are only 5 and 4%, respectively. The emissivities at mm-wavelengths are lower than in the far-IR, confirming that particles with sizes of about 100 mikron influence the mm-behaviour. The 3-mm observations are very powerful for the study of asteroid surface heterogeneities.

We investigated the physical and thermal properties of 65 Cybele}, one of the largest main-belt asteroids. Based on published and recently obtained thermal infrared observations, including ISO measurements, we derived through thermophysical modelling (TPM) a size of 302x290x232 km (+/- 4 %) and an geometric visible albedo of 0.050+/-0.005. Our model of a regolith covered surface with low thermal inertia and "default" roughness describes the wavelengths and phase angle dependent thermal aspects very well. Before/after opposition effect and beaming behaviour can be explained in that way. We found a constant emissivity of 0.9 at wavelengths up to about 100 micron and lower values towards the submillimetre range, indicating a grain size distribution dominated by 200 micron particle sizes. The spectroscopic analysis revealed an emissivity increase between 8.0 and 9.5 micron. We compared this emissivity behaviour with the Christiansen features of carbonaceous chondrite meteorites, but a conclusive identification was not possible. A comparison between the Standard Thermal Model (STM) and the applied TPM clearly demonstrates the limitations and problems of the STM for the analysis of multi-epoch and -wavelengths observations. While the TPM produced a unique diameter/albedo solution, the calculated STM values varied by +/-30 % and showed clear trends with wavelength and phase angle. Cybele can be considered as a nice textbook case for the thermophysical analysis of combined optical and thermal infrared observations.

Comet Hale-Bopp was observed five times with ISOPHOT, the photometer on board the Infrared Space Observatory (ISO). Each time broadband photometry was performed using 4 different detectors, 5 apertures and, 10 filters covering the range between 3.6 to 175 $\mu$m. Calibration measurements using the internal Fine Calibration Source were done together with each individual measurement. Background observations were performed with identical instrument settings at the same positions on the sky several days after the comet observations. The observation strategy and the initial data reduction steps are described in some detail and the resulting in-band power values of the Hale-Bopp observations and their uncertainties are derived. Initial reduction of these measurements was performed in 3 steps: (1) processing of raw data by removing instrumental and energetic particle effects, (2) averaging of the individual signals, and (3) determination of the detector responsivities and their uncertainties. The detector signal is determined by two different methods and the best value is chosen. At the present level of processing uncertainties range from 10% to a factor of 3 for the low power levels at short wavelengths. The in-band power levels at different wavelengths varied over 3 orders of magnitude.