Thick disks are faint and extended stellar components found around several disk galaxies including our Milky Way. The Milky Way thick disk, the only one studied in detail, contains mostly old disk stars (~10 Gyr), so that thick disks are likely to trace the early stages of disk evolution. Previous detections of thick disk stellar light in external galaxies have been originally made for early-type, edge-on galaxies but detailed 2D thick/thin disk decompositions have been reported for only a scant handful of mostly late-type disk galaxies. We present in this paper for the first time explicit 3D thick/thin disk decompositions characterising the presence and properties (eg scalelength and scaleheight) for a sample of eight lenticular galaxies by fitting 3D disk models to the data. For six out of the eight galaxies we were able to derive a consistent thin/thick disk model. The mean scaleheight of the thick disk is 3.6 times larger than that of the thin disk. The scalelength of the thick disk is about twice, and its central luminosity density between 3-10% of, the thin disk value. Both thin and thick disk are truncated at similar radii. This implies that thick disks extend over fewer scalelengths than thin disks, and turning a thin disk into a thick one requires therefore vertical but little radial heating. All these structural parameters are similar to thick disk parameters for later Hubble-type galaxies previously studied. We discuss our data in respect to present models for the origin of thick disks, either as pre- or post-thin-disk structures, providing new observational constraints.

Inspecting all 1224 edge-on disk galaxies larger than 2' in the RC3 on DSS images we have found several galaxies with extraordinary bulges meeting two criteria: They are box shaped and large in respect to the diameters of their galaxies. These bulges are often disturbed, show frequently prominent irregularities and asymmetries, and some possess possible merger remnants or merging satellites. For these bulges we have introduced the term "Thick Boxy Bulges" (TBBs). About 2% of all disk galaxies (S0-Sd), respectively 4% of all galaxies with box- and peanut-shaped (b/p) bulges, belong to this class of galaxies. Using multicolour CCD and NIR data we have enlarged and followed up our sample of nearly 20 galaxies with a TBB. The disturbed morphology of a large fraction of these galaxies shows that many of the TBB galaxies are not dynamically settled. For the TBBs the extent of the box shape seems to be too large to result from a normal bar potential. Therefore we conclude that two classes of b/p bulges exist with different origins. While most (~96%) b/p bulges can be explained by bars alone, the extended boxy structures of TBBs result most likely from accreted material by infalling satellite companions (soft merging).

Late-type spiral galaxies are thought to be the dynamically simplest type of disk galaxies and our understanding of their properties plays a key role in the galaxy formation and evolution scenarios. The low surface brightness (LSB) galaxy UGC 7321, a nearby, isolated, ``superthin'' edge-on galaxy, is an ideal object to study those purely disk dominated bulge-less galaxies. Although late type spirals are believed to exhibit the simplest possible structure, even prior observations showed deviations from a pure single component exponential disk in the case of UGC 7321. We present for the first time photometric evidence for peanut-shaped outer isophotes from a deep optical (R-band) image of UGC 7321. Observations and dynamical modeling suggest that boxy/peanut-shaped (b/p) bulges in general form through the buckling instability in bars of the parent galaxy disks. Together with recent HI observations supporting the presence of a stellar bar in UGC 7321 this could be the earliest known case of the buckling process during the evolutionary life of a LSB galaxy, whereby material in the disk-bar has started to be pumped up above the disk, but a genuine bulge has not yet formed.

We present deep optical imaging of three face-on disk galaxies together with a detailed description of the reduction and calibration methods used, in order to measure the intrinsic shape of their outer stellar edges. Whereas it is now well accepted that disks of spiral galaxies are not infinite exponential beyond galactocentric distances of about 3-5 radial scalelengths, the genuine structure of the truncation region is not yet well known. Our data quantitatively establish a smooth truncation behaviour of the radial surface brightness profiles and is best described by a two-slope model, characterised by an inner and outer exponential scalelength separated at a relatively well defined break radius. This result disagrees with the frequently assumed sharply truncated nature of the radial surface brightness profiles and implies the presence of stars and even star-formation beyond the break radius. In addition, we do not find a strong influence of a nearby companion on the ratio of the break radius to the radial scalelength. Our results denote new observational constraints for the search of the physical explanation for these smooth disk truncations.

We present the results from our deep optical imaging survey \mu_lim=26-27 V-mag/arcsec^2 of a morphologically selected sample of 72 edge-on disk galaxies. The question of the global structure of galactic stellar disks, especially the radial surface brightness profile at large galactocentric distances, is addressed. We find that typical radial profiles are better described by a two-slope exponential profile --characterised by an inner and outer scalelength separated at a break radius-- rather than a sharply-truncated exponential model. Results are given for three face-on equivalents, serving as the crucial test to assure the findings for the edge-on sample without possible geometrical line-of-sight effects.

We have observed 60 edge-on galaxies in the NIR in order to study the stellar distribution in galaxies with box/peanut-shaped bulges. The much smaller amount of dust extinction at these wavelengths allows us to identify in almost all target galaxies with box/peanut-shaped bulges an additional thin, central component in cuts parallel to the major axis. This structure can be identified with a bar. The length of this structure scaled by the length of the bulge correlates with the morphologically classified shape of the bulge. This newly established correlation is therefore mainly interpreted as the projection of the bar at different aspect angles. Galaxies with peanut bulges have a bar seen nearly edge-on and the ratio of bar length to thickness, 14 +/- 4, can be directly measured for the first time. In addition, the correlation of the boxiness of bulges with the bar strength indicates that the bar characteristic could partly explain differences in the bulge shape. Furthermore, a new size relation between the box/peanut structure and the central bulge is found. Our observations are discussed in comparison to a N-body simulation for barred galaxies (Pfenniger & Friedli 1991). We conclude that the inner region of barred disk galaxies are build up by three distinct components: the spheroidal bulge, a thin bar, and a b/p structure most likely representing the thick part of the bar.

We present a classification for bulges of a complete sample of ~1350 edge-on disk galaxies derived from the RC3 (Third Reference Catalogue of Bright Galaxies, de Vaucouleurs et al. 1991). A visual classification of the bulges using the Digitized Sky Survey (DSS) in three types of b/p bulges or as an elliptical type is presented and supported by CCD images. NIR observations reveal that dust extinction does almost not influence the shape of bulges. There is no substantial difference between the shape of bulges in the optical and in the NIR. Our analysis reveals that 45% of all bulges are box- and peanut-shaped (b/p). The frequency of b/p bulges for all morphological types from S0 to Sd is > 40%. In particular, this is for the first time that such a large frequency of b/p bulges is reported for galaxies as late as Sd. The fraction of the observed b/p bulges is large enough to explain the b/p bulges by bars.

We present the analysis of a CCD survey of 31 nearby (<= 110 Mpc) edge-on spiral galaxies. The three-dimensional one-component best fit models provide their disk-scalelengths h and for the first time their disk cut-off radii R_{co}. We confirm for this sample the existence of such sharp truncations, and find a significantly lower mean value of the distance independent ratio R_{co}/h =2.9 +- 0.7 than the standard value of 4.5 often used in the literature. Our data show no correlation of these parameters with Hubble type, whereas we report a correlation between R_{co}/h and the distance based scalelength in linear units. Compared to the Milky Way we find only lower values of R_{co}/h, explained either by possible selection effects or by the completely different techniques used. We discuss our data in respect to present models for the origin of the cut-off radii, either as a relict of the galaxy formation process, or as an evolutionary phenomenon.

We present detailed three-dimensional modelling of the stellar luminosity distribution for the disks of 31 relatively nearby (<= 110 Mpc) edge-on spiral galaxies. In contrast to most of the standard methods available in the literature we take into account the full three-dimensional information of the disk. We minimize the difference between the observed 2D-image and an image of our 3D-disk model integrated along the line of sight. Thereby we specify the inclination, the fitting function for the z-distribution of the disk, and the best values for the structural parameters such as scalelength, scaleheight, central surface brightness, and a disk cut-off radius. From a comparison of two independently developed methods we conclude, that the discrepancies e.g. for the scaleheights and scalelengths are of the order of ~10%. These differences are not due to the individual method itself, but rather to the selected fitting region, which masks the bulge component, the dust lane, or present foreground stars. Other serious limitations are small but appreciable intrinsic deviations of real disks compared to the simple input model. In this paper we describe the methods and present contour plots as well as radial profiles for all galaxies without previously published surface photometry. Resulting parameters are given for the complete sample.