We have identified a sample of 33 Sun-like stars observed by the {\it International Ultraviolet Explorer (IUE)} with the short wavelength (SW) spectrographs that have ground-based detections of chromospheric Ca\,II H+K activity. Our objective is to determine if these observations can provide an estimate of the decrease in ultraviolet (UV) surface flux associated with a transition from a normal stellar cycle to a grand minimum state. The activity detections, corrected to solar metallicity, span the range $-$5.16 $<$ log $R'$$_{HK}$ $<$ $-$4.26, and eight stars have log $R'$$_{HK}$ $<$ $-$5.00. The {\it IUE}-observed flux spectra are integrated over the wavelength range 1250$-$1910 \AA , transformed to surface fluxes, and then normalized to solar B $-$ V. These normalized surface fluxes show a strong linear relationship with activity $R'$$_{HK}$ ($R^2$ $=$ 0.857 after three outliers are omitted). From this linear regression we estimate a range in UV flux of 9.3\% over solar cycle 22, and a reduction of 6.9\% below solar cycle minimum under a grand minimum. The 95\% confidence interval in this grand minimum estimate is 5.5\%$-$8.4\%. An alternative estimate is provided by the {\it IUE} observations of $\tau$\,Cet (HD\,10700), a star having strong evidence of being in a grand-minimum state, and this star's normalized surface flux is 23.0$\pm$5.7\% lower than solar cycle minimum.

In this paper we present the Low Frequency Instrument (LFI), designed and developed as part of the Planck space mission, the ESA program dedicated to precision imaging of the cosmic microwave background (CMB). Planck-LFI will observe the full sky in intensity and polarisation in three frequency bands centred at 30, 44 and 70 GHz, while higher frequencies (100-850 GHz) will be covered by the HFI instrument. The LFI is an array of microwave radiometers based on state-of-the-art Indium Phosphide cryogenic HEMT amplifiers implemented in a differential system using blackbody loads as reference signals. The front-end is cooled to 20K for optimal sensitivity and the reference loads are cooled to 4K to minimise low frequency noise. We provide an overview of the LFI, discuss the leading scientific requirements and describe the design solutions adopted for the various hardware subsystems. The main drivers of the radiometric, optical and thermal design are discussed, including the stringent requirements on sensitivity, stability, and rejection of systematic effects. Further details on the key instrument units and the results of ground calibration are provided in a set of companion papers.

We present the first large sample of absorption systems in paired QSOs consisting of 691 absorption systems in the spectra of 310 QSOs including 170 pairings. All these absorption systems have metal lines, usually C IV or Mg II. We see 17 cases of absorption in one line-of-sight within 200 km/s (1 Mpc) of absorption in the paired line-of-sight with the probability at least approx 50% at 100kpc, declining rapidly to 23% at 100 - 200 kpc. We detect clustering on 0.5Mpc scales and see a hint of the "fingers of God" redshift-space distortion. The distribution matches absorbers arising in galaxies at z=2 with a normal correlation function and systematic infall velocities but unusually low random pair-wise velocity differences. Absorption in gas flowing out from galaxies at a mean velocity of 250 km/s would produce vastly more elongation than we see. The UV absorption from fast winds that Adelberger et al. 2005 see in spectra of LBGs is not representative of the absorption that we see. Either the winds are confined to LBGs, or they can not extend to 40 kpc with large velocities, while continuing to make UV absorption we see, implying most metals were in place in the IGM long before z=2. Separately, when we examine the absorption seen when a sight line passes a second QSO, we see 19 absorbers within 400 km/s of the partner QSO. The probability of seeing absorption is approximately constant for impact parameters 0.1 - 1.5 Mpc. Perhaps we do not see a rapid rise in the probability at small impact parameters because the UV from QSOs destroys some absorbers near to the QSOs. The 3D distribution of 64 absorbers around 313 QSOs is to first order isotropic, with just a hint of the anisotropy expected if the QSO UV emission is beamed, or alternatively QSOs might emit UV isotropically but for a surprisingly short time of only 0.3Myr.

We list and analyze H I absorption lines at redshifts 2 < z < 4 with column density (12 < log(N_HI) < 19) in 40 high-resolutional (FWHM = 8.0 km/s) quasar spectra obtained with the Keck+HIRES. We de-blend and fit all H I lines within 1,000 km/s of 86 strong H I lines whose column densities are log(N_HI/[cm^-2]) > 15. Unlike most prior studies, we use not only Lya but also all visible higher Lyman series lines to improve the fitting accuracy. This reveals components near to higher column density systems that can not be seen in Lya. We list the Voigt profile fits to the 1339 H I components that we found. We examined physical properties of H I lines after separating them into several sub-samples according to their velocity separation from the quasars, their redshift, column density and the S/N ratio of the spectrum. We found two interesting trends for lines with 12 < log(N_HI) < 15 which are within 200-1000 km/s of systems with log(N_HI) > 15. First, their column density distribution becomes steeper, meaning relatively fewer high column density lines, at z < 2.9. Second, their column density distribution also becomes steeper and their line width becomes broader by about 2-3 km/s when they are within 5,000 km/s of their quasar.

We use Keck/HIRES spectra of 37 optically bright quasars at z=2-4 to study narrow absorption lines that are intrinsic to the quasars (intrinsic NALs, produced in gas that is physically associated with the quasar central engine). We identify 150 NAL systems, that contain 124 C IV, 12 N V, and 50 Si IV doublets, of which 18 are associated systems (within 5,000 km/s of the quasar redshift). We use partial coverage analysis to separate intrinsic NALs from NALs produced in cosmologically intervening structures. We find 39 candidate intrinsic systems, (28 reliable determinations and 11 that are possibly intrinsic). We estimate that 10-17% of C IV systems at blueshifts of 5,000-70,000 km/s relative to quasars are intrinsic. At least 32% of quasars contain one or more intrinsic C IV NALs. Considering N V and Si IV doublets showing partial coverage as well, at least 50% of quasars host intrinsic NALs. This result constrains the solid angle subtended by the absorbers to the background source(s). We identify two families of intrinsic NAL systems, those with strong N V absorption, and those with negligible absorption in N V, but with partial coverage in the C IV doublet. We discuss the idea that these two families represent different regions or conditions in accretion disk winds. Of the 26 intrinsic C IV NAL systems, 13 have detectable low-ionization absorption lines at similar velocities, suggesting that these are two-phase structures in the wind rather than absorbers in the host galaxy. We also compare possible models for quasar outflows, including radiatively accelerated disk-driven winds, magnetocentrifugally accelerated winds, and pressure-driven winds, and we discuss ways of distinguishing between these models observationally.

We measure the amount of absorption in the Lyman-alpha forest at 0 < z < 1.6 in HST FOS spectra of 74 QSOs. At 0 < z < 1.6 we find that 79% of the absorption is from the low density intergalactic medium, 12% from metals and 9% from the strong H I lines, nearly identical to the percentages (78, 15 and 7) that we measured independently at z=2 from spectra taken with the Kast spectrograph on the Lick 3-m. At z=1 the low density intergalactic medium absorbs 0.037 +/- 0.004 of the flux. The error includes some but not all of the uncertainty in the continuum level. The remaining part gives relative errors of approximately 0.21 when we report the mean absorption in eight independent redshift intervals, and 0.047 when we average over all redshifts. We find 1.46 times more absorption from the low density intergalactic medium than comes from Ly-alpha lines that Bechtold et al. 2002 listed in the same spectra. The amount of absorption increases with z and can be fit by a power law in (1+z) with index 1.01. This corresponds to no change in the number of lines, of fixed rest frame equivalent widths, per unit redshift, consistent with the Janknecht et al. 2006 results on the distribution of lines. When we include similar measurements from higher redshifts, we need more degrees of freedom to fit the amount of absorption at 0 < z < 3.2. A power law with a break in slope, changing from index 1.5 at low z to 3.0 above z ~ 1.1 is a better but only marginally acceptable fit. We also calculate two other continuous statistics, the flux probability distribution function and the flux autocorrelation function that is non zero out to v ~ 500 km/sec at 0.5 < z < 1.5.

We present statistical and monitoring results of narrow absorption lines that are physically related to quasars (i.e., intrinsic NALs). We use Keck/HIRES spectra of 37 optically bright quasars at z=2-4, and identify 150 NAL systems that contain 124 C IV, 12 N V, and 50 Si IV doublets. Among them, 39 are classified as intrinsic systems based on partial coverage analysis. At least 50% of quasars host intrinsic NALs. We identify two families of intrinsic systems based on their ionization state. Some intrinsic systems have detectable low-ionization NALs at similar velocities as higher-ionization NALs, although such low-ionization lines are rare in broad absorption line (BAL) systems. We also have observed an optically bright quasar, HS1603+3820, eight times with Subaru/HDS and HET/MRS over an interval of 4.2 years (1.2 years in the quasar rest frame), for the purpose of monitoring a variable C IV mini-BAL system. We find that all the troughs of the system vary in concert. However, no other correlations are seen between the variations of different profile parameters. We propose that the observed variations are either (i) a result of rapid continuum fluctuations, caused by a clumpy screen of variable optical depth located between the continuum source and the mini-BAL gas, or (ii) a result of variable scattering of continuum photons around the absorber.

We use high quality echelle spectra of 24 QSOs to provide a calibrated measurement of the total amount of Lyman-alpha forest absorption (DA) over the redshift range 2.2 < z < 3.2. Our measurement of DA excludes absorption from metal lines or the Lyman-alpha lines of Lyman limit systems and damped Lyman-alpha systems. We use artificial spectra with realistic flux calibration errors to show that we are able to place continuum levels that are accurate to better than 1%. When we combine our results with our previous results between 1.6 < z < 2.2, we find that the redshift evolution of DA is well described over 1.6 < z < 3.2 as A*(1+z)^gamma, where A = 0.0062 and gamma = 2.75. We detect no significant deviations from a smooth power law evolution over the redshift range studied. We find less H I absorption than expected at z=3, implying that the UV background is about 40% higher than expected. Our data appears to be consistent with an H I ionization rate of Gamma ~ 1.4E-12 1/s.

We present 40 fully hydrodynamical numerical simulations of the intergalactic gas that gives rise to the Ly-alpha forest. We make artificial spectra from each and measure three output parameters: the mean flux, a measure of the most common Ly-alpha line width (b-value), and the 1D power spectrum of the flux on scales from 0.01 - 0.1 s/km. We investigate how these output parameters are correlated with the input parameters that describe the simulations. These input parameters include the main cosmological parameters; and two astrophysical parameters gammah and gammahe. The parameter gammah controls the rate of ionization of H I, He I and He II while gammahe controls the rate of heating. We compare the output from the simulations to data from HIRES and UVES spectra and we give a new measurement of the flux power from these spectra at z=1.95. We find that simulations with a wide variety of sigma_8 values, from at least 0.8 - 1.1, can fit the small scale flux power and b-values when we adjust gammahe to compensate for the sigma_8 change. We can also use gammah to adjust the H I ionization rate to simultaneously match the mean flux. We derive scaling relations that give the output parameter values expected for a variety of input parameters with errors of 2% for optical depth and 1.4% for b-balues. We can break the degeneracy between gammahe and sigma_8 using large scale power or other data to fix sigma_8.

We present a moderate resolution (~1.15 Angstroms/pixel) survey of 79 quasars obtained using the Kast spectrograph on the Shane 3m telescope at Lick observatory. The spectra span the wavelength range of 3175-5880 Angstroms, and have typical signal to noise of 6-20 in the regions of the spectra showing Lyman alpha forest absorption. The quasars have a mean emission redshift of z=2.17, and nearly all cover the entire Lyman alpha forest between Lyman alpha and Lyman beta. Although the quasars were selected to avoid BAL, two quasars in the survey are BAL, one of which is a new discovery. We list the HI and metal ions observed in a total of 140 absorption systems. We also identify 526 emission lines, and list their observed wavelengths, along with new redshifts of the quasars. We determine the rest wavelengths of 3 emission lines or line blends in the forest to be 1070.95 +/- 1.00, 1123.13 +/- 0.51, and 1175.88 +/- 0.30 Angstroms.

We identify a concordant model for the intergalactic medium (IGM) at redshift z=1.9 that uses popular values for cosmological and astrophysical parameters and accounts for all baryons with an uncertainty of 6%. We have measured the amount of absorption, DA, in the Ly-alpha forest at redshift 1.9 in spectra of 77 QSO from the Kast spectrograph. We calibrated the continuum fits with realistic artificial spectra, and we found that averaged over all 77 QSOs the mean continuum level is within 1-2% of the correct value. Absorption from all lines in the Ly-alpha forest at z=1.9 removes DA=15.1 +/- 0.7% of the flux between 1070 and 1170 (rest) Angstroms. This is the first measurement using many QSOs at this z, and the first calibrated measurement at any redshift. Metal lines absorb 2.3 +/- 0.5%, and LLS absorb 1.0 +/- 0.4% leaving 11.8 +/- 1.0% from the lower density bulk of the IGM. Averaging over Delta z=0.1 or 154 Mpc, the dispersion is 6.1 +/- 0.3% including LLS and metal lines, or 3.9 (+0.5, -0.7)% for the lower density IGM alone, consistent with the usual description of large scale structure. LLS and metal lines are major contributors to the variation in the mean flux, and they make the flux field significantly non-Gaussian. We find that a hydrodynamic simulation on a 1024 cubed grid in a 75.7 Mpc box reproduces the observed DA from the low density IGM with parameters values H_o=71 km/s/Mpc, Omega_Lambda=0.73, Omega_m=0.27, Omega_b=0.044, sigma_8=0.9 and a UV background that has an ionization rate that is 1.08 +/- 0.08 times the prediction by Madau, Haardt & Rees (1999).

We present a method to make predictions with sets of correlated data values, in this case QSO flux spectra. We predict the continuum in the Lyman-Alpha forest of a QSO, from 1020 -- 1216 A, using the spectrum of that QSO from 1216 -- 1600 A . We find correlations between the unabsorbed flux in these two wavelengths regions in the HST spectra of 50 QSOs. We use principal component analysis (PCA) to summarize the variety of these spectra and we relate the weights of the principal components for 1020 -- 1600 A to the weights for 1216 -- 1600 A, and we apply this relation to make predictions. We test the method on the HST spectra, and we find an average absolute flux error of 9%, with a range 3 -- 30%, where individual predictions are systematically too low or too high. We mention several ways in which the predictions might be improved.

We describe a new method to calibrate the relative flux levels in spectra from the HIRES echelle spectrograph on the Keck-I telescope. Standard data reduction techniques that transfer the instrument response between HIRES integrations leave errors in the flux of 5 - 10%, because the effective response varies. The flux errors are most severe near the ends of each spectral order, where there can be discontinuous jumps. The source of these errors is uncertain, but may include changes in the vignetting connected to the optical alignment. Our new flux calibration method uses a calibrated reference spectrum of each target to calibrate individual HIRES integrations. We determine the instrument response independently for each integration, and hence we avoid the need to transfer the instrument response between HIRES integrations. The procedure can be applied to any HIRES spectrum, or any other spectrum. While the accuracy of the method depends upon many factors, we have been able to flux calibrate a HIRES spectrum to 1% over scales of 200 A that include order joins. We illustrate the method with spectra of Q1243+3047 towards which we have measured the deuterium to hydrogen abundance ratio.

We report the detection of Deuterium absorption at redshift 2.525659 towards Q1243+3047. We describe improved methods to estimate the Deuterium to Hydrogen abundance ratio (D/H) in absorption systems, including improved modeling of the continuum level, the Ly-alpha forest and the velocity structure of the absorption. Together with improved relative flux calibration, these methods give D/H = 2.42^+0.35_-0.25 x 10^-5 cm^-2 from our Keck-I HIRES spectra of Q1243+3047, where the error is from the uncertainty in the shape of the continuum level and the amount of D absorption in a minor second component. The measured D/H is likely the primordial value because the [O/H] = -2.79 +/- 0.05. This absorption system has a neutral Hydrogen column density of 19.73 +/- 0.04 cm^-2, it shows five D lines and is mostly ionized. The best estimate of the primordial D/H is 2.78^+0.44_-0.38 x 10^-5, from the log D/H values towards five QSOs. The dispersion in the five values is larger than we expect from their individual measurement errors and we suspect this is because some of these errors were underestimated. We observe a trend in D/H with neutral H column density that we also suspect is spurious. The D/H corresponds to a baryon-to-photon ratio ETA = 5.9 +/- 0.5 x 10^-10 and a cosmological baryon density Omega_b h^2 = 0.0214 +/- 0.0020 (9.3%) that agrees with values from the pre-MAP measurements of the anisotropy of the Cosmic Microwave Background.

We present 14 N^0 measurements from our HIRES/Keck database of damped Lya abundances. These data are combined with measurements from the recent and past literature to build an homogeneous, uniform set of observations. We examine photoionization diagnostics like Fe^++ and Ar^0 in the majority of the complete sample and assess the impact of ionization corrections on N/alpha and alpha/H values derived from observed ionic column densities of N^0, Si^+, H^0, and S^+. Our final sample of 19 N/alpha, alpha/H pairs appears bimodal; the majority of systems show N/alpha values consistent with metal-poor emission regions in the local universe but a small sub-sample exhibit significantly lower N/alpha ratios. Contrary to previous studies of N/alpha in the damped systems, our sample shows little scatter within each sub-sample. We consider various scenarios to explain the presence of the low N/alpha sightlines and account for the apparent bimodality. We favor a model where at least some galaxies undergo an initial burst of star formation with suppressed formation of intermediate-mass stars. We found a power-law IMF with slope 0.10 or a mass cut of ~5-8 Msolar would successfully reproduce the observed LN-DLA values. If the bimodal distribution is confirmed by a larger sample of measurements, this may present the first observational evidence for a top heavy initial mass function in some early stellar populations.

We investigate the ionization state of the damped Lya system at z=2.62 toward GB1759+7539 through an analysis of ionic ratios sensitive to photoionization: ArI/SII, FeIII/FeII, NII/NI, AlIII/AlII. Approximately half of the metals arise in a mostly neutral velocity component with HI/H > 0.9, based on FeIII/FeII < 0.013. In contrast, the remaining half exhibits FeIII/FeII~0.3 indicative of a partially ionized medium with HI/H~0.5. These conclusions are supported by the observed NII/NI, AlIII/AlII, and ArI/SII ratios. We assess ionization corrections for the observed column densities through photoionization models derived from the CLOUDY software package. In the neutral gas, the ionization corrections are negligible except for ArI. However for the partially ionized gas, element abundance ratios differ from the ionic ratios by 0.1-0.3 dex for (SiII, SII, NiII, AlII)/FeII ratios and more for (NI, ArI)/FeII. Independent of the shape of the photoionizing spectrum and assumptions on the number of ionization phases, these ionization corrections have minimal impact (<0.1dex) on the total metallicity inferred for this damped Lya system. Measurements on the relative elemental abundances of the partially ionized gas, however, have a greater than ~0.15 dex uncertainty which hides the effects of nucleosynthesis and dust depletion. We caution the reader that this damped system is unusual for a number of reasons (e.g. a very low ArI/SII ratio) and we believe its ionization properties are special but not unique. Nevertheless, it clearly shows the value of examining photoionization diagnostics like FeIII/FeII in a larger sample of systems.

The z ~ 0.701 absorption system towards the QSO PG1718+4807 is the only example of a QSO absorption system which might have a deuterium/hydrogen ratio approximately ten times the value found towards other QSOs. We have obtained new STIS spectra from the Hubble Space Telescope of the Lyman alpha and Lyman limit regions of the system. These spectra give the redshift and velocity dispersion of the neutral hydrogen which produces most of the observed absorption. The Lyman alpha line is too narrow to account for all of the observed absorption. It was previously known that extra absorption is needed on the blue side of the main H I near to the expected position of deuterium. The current data suggests with a 98% confidence level that the extra absorption is not deuterium. Some uncertainty persists because we have a low signal to noise ratio and the extra absorption - be it deuterium or hydrogen - is heavily blended with the Lyman alpha absorption from the main hydrogen component.

We report the measurement of the primordial D/H abundance ratio towards QSO \object. The column density of the hydrogen in the $z \simeq 2.536$ Lyman limit system is high, \lnhi $= 19.422 \pm 0.009$ \cmm, allowing for the deuterium to be seen in 5 Lyman series transitions. The measured value of the D/H ratio towards QSO \object is found to be D/H$ = 2.54 \pm 0.23 \times 10^{-5}$. The metallicity of the system showing D/H is found to be $\simeq 0.01$ solar, indicating that the measured D/H is the primordial D/H within the measurement errors. The gas which shows D/H is neutral, unlike previous D/H systems which were more highly ionized. Thus, the determination of the D/H ratio becomes more secure since we are measuring it in different astrophysical environments, but the error is larger because we now see more dispersion between measurements. Combined with prior measurements of D/H, the best D/H ratio is now D/H$ = 3.0 \pm 0.4 \times 10^{-5}$, which is 10% lower than the previous value. The new values for the baryon to photon ratio, and baryonic matter density derived from D/H are $\eta = 5.6 \pm 0.5 \times 10^{-10} $ and \ob $=0.0205 \pm 0.0018$ respectively.

Big Bang Nucleosynthesis (BBN) is the synthesis of the light nuclei, Deuterium, He3, He4 and Li7, during the first few minutes of the universe. This review concentrates on recent improvements in the measurement of the primordial (after BBN, and prior to modification) abundances of these nuclei. We mention improvement in the standard theory, and the non-standard extensions which are limited by the data. (abridged)

We have discovered a third quasar absorption system which is consistent with a low deuterium to hydrogen abundance ratio, D/H = 3.4 times 10^-5. The z ~ 2.8 partial Lyman limit system towards QSO 0130-4021 provides the strongest evidence to date against large D/H ratios because the H I absorption, which consists of a single high column density component with unsaturated high order Lyman series lines, is readily modeled -- a task which is more complex in other D/H systems. We have obtained twenty-two hours of spectra from the HIRES spectrograph on the W.M. Keck telescope, which allow a detailed description of the Hydrogen. We see excess absorption on the blue wing of the H I Lyman alpha line, near the expected position of Deuterium. However, we find that Deuterium cannot explain all of the excess absorption, and hence there must be contamination by additional absorption, probably H I. This extra H I can account for most or all of the absorption at the D position, and hence D/H = 0 is allowed. We find an upper limit of D/H < 6.7 times 10^-5 in this system, consistent with the value of D/H ~ 3.4 times 10^-5 deduced towards QSO 1009+2956 and QSO 1937-1009 by Burles and Tytler (1998a, 1998b). This absorption system shows only weak metal line absorption, and we estimate [Si/H] < -2.6 -- indicating that the D/H ratio of the system is likely primordial. All four of the known high redshift absorption line systems simple enough to provide useful limits on D are consistent with D/H = 3.4 +/- 0.25 times 10^-5. Conversely, this QSO provides the third case which is inconsistent with much larger values.