Normalized to: Liljeström, A.
[1]
oai:arXiv.org:1109.5070 [pdf] - 1084341
Mapping the prestellar core Ophiuchus D (L1696A) in ammonia
Submitted: 2011-09-23
The gas kinetic temperature in the centres of starless, high-density cores is
predicted to fall as low as 5-6 K. The aim of this study was to determine the
kinetic temperature distribution in the low-mass prestellar core Oph D where
previous observations suggest a very low central temperature. The densest part
of the Oph D core was mapped in the NH3(1,1) and (2,2) inversion lines using
the Very Large Array (VLA). The physical quantities were derived from the
observed spectra by fitting the hyperfine structure of the lines, and
subsequently the temperature distribution of Oph D was calculated using the
standard rotational temperature techniques. A physical model of the cores was
constructed, and the simulated spectra after radiative transfer calculations
with a 3D Monte Carlo code were compared with the observed spectra.
Temperature, density, and ammonia abundance of the core model were tuned until
a satisfactory match with the observation was obtained. The high resolution of
the interferometric data reveals that the southern part of Oph D comprises of
two small cores. The gas kinetic temperatures, as derived from ammonia towards
the centres of the southern and northern core are 7.4 and 8.9 K, respectively.
The observed masses of the cores are only 0.2 M_Sun. Their potential collapse
could lead to formation of brown dwarfs or low-mass stars.
[2]
oai:arXiv.org:0906.1200 [pdf] - 25009
Reynolds stresses from hydrodynamic turbulence with shear and rotation
Submitted: 2009-06-08, last modified: 2009-11-19
To study the Reynolds stresses which describe turbulent momentum transport
from turbulence affected by large-scale shear and rotation. Three-dimensional
numerical simulations are used to study turbulent transport under the
influences of large-scale shear and rotation in homogeneous, isotropically
forced turbulence. We study three cases: one with only shear, and two others
where in addition to shear, rotation is present. These cases differ by the
angle (0 or 90\degr) the rotation vector makes with respect to the z-direction.
Two subsets of runs are performed with both values of \theta where either
rotation or shear is kept constant. When only shear is present, the
off-diagonal stress can be described by turbulent viscosity whereas if the
system also rotates, nondiffusive contributions (\Lambda-effect) to the stress
can arise. Comparison of the direct simulations are made with analytical
results from a simple closure model. We find that the turbulent viscosity is of
the order of the first order smoothing result in the parameter regime studied
and that for sufficiently large Reynolds numbers the Strouhal number,
describing the ratio of correlation to turnover times, is roughly 1.5. This is
consistent with the closure model based on the minimal tau-approximation which
produces a reasonable fit to the simulation data for similar Strouhal numbers.
In the cases where rotation is present, separating the diffusive and
nondiffusive components of the stress turns out to be challenging but taking
the results at face value, we can obtain nondiffusive contributions of the
order of 0.1 times the turbulent viscosity. We also find that the simple
closure model is able to reproduce most of the qualitative features of the
numerical results provided that the Strouhal number is of the order of unity.
[3]
oai:arXiv.org:0811.2341 [pdf] - 18538
Turbulent stresses as a function of shear rate in a local disk model
Submitted: 2008-11-14
We present local numerical models of accretion disk turbulence driven by the
magnetorotational instability with varying shear rate. The resulting turbulent
stresses are compared with predictions of a closure model in which triple
correlations are modelled in terms of quadratic correlations. This local model
uses five nondimensional parameters to describe the properties of the flow. We
attempt to determine these closure parameters for our simulations and find that
the model does produce qualitatively correct behaviour. In addition, we present
results concerning the shear rate dependency of the magnetic to kinetic energy
ratio. We find both the turbulent stress ratio and the total stress to be
strongly dependent on the shear rate.