The Complete Calibration of the Colour-Redshift Relation survey (C3R2) is a spectroscopic effort involving ESO and Keck facilities designed to empirically calibrate the galaxy colour-redshift relation - P(z|C) to the Euclid depth (i_AB=24.5) and is intimately linked to upcoming Stage IV dark energy missions based on weak lensing cosmology. The aim is to build a spectroscopic calibration sample that is as representative as possible of the galaxies of the Euclid weak lensing sample. In order to minimise the number of spectroscopic observations to fill the gaps in current knowledge of the P(z|C), self-organising map (SOM) representations of the galaxy colour space have been constructed. Here we present the first results of an ESO@ VLT Large Programme approved in the context of C3R2, which makes use of the two VLT optical and near-infrared multi-object spectrographs, FORS2 and KMOS. This paper focuses on high-quality spectroscopic redshifts of high-z galaxies observed with the KMOS spectrograph in the H- and K-bands. A total of 424 highly-reliable z are measured in the 1.3<=z<=2.5 range, with total success rates of 60.7% in the H-band and 32.8% in the K-band. The newly determined z fill 55% of high and 35% of lower priority empty SOM grid cells. We measured Halpha fluxes in a 1."2 radius aperture from the spectra of the spectroscopically confirmed galaxies and converted them into star formation rates. In addition, we performed an SED fitting analysis on the same sample in order to derive stellar masses, E(B-V), total magnitudes, and SFRs. We combine the results obtained from the spectra with those derived via SED fitting, and we show that the spectroscopic failures come from either weakly star-forming galaxies (at z<1.7, i.e. in the H-band) or low S/N spectra (in the K-band) of z>2 galaxies.

Weak lensing, which is the deflection of light by matter along the line of sight, has proven to be an efficient method for constraining models of structure formation and reveal the nature of dark energy. So far, most weak-lensing studies have focused on the shear field that can be measured directly from the ellipticity of background galaxies. However, within the context of forthcoming full-sky weak-lensing surveys such as Euclid, convergence maps (mass maps) offer an important advantage over shear fields in terms of cosmological exploitation. While it carry the same information, the lensing signal is more compressed in the convergence maps than in the shear field. This simplifies otherwise computationally expensive analyses, for instance, non-Gaussianity studies. However, the inversion of the non-local shear field requires accurate control of systematic effects caused by holes in the data field, field borders, shape noise, and the fact that the shear is not a direct observable (reduced shear). We present the two mass-inversion methods that are included in the official Euclid data-processing pipeline: the standard Kaiser & Squires method (KS), and a new mass-inversion method (KS+) that aims to reduce the information loss during the mass inversion. This new method is based on the KS method and includes corrections for mass-mapping systematic effects. The results of the KS+ method are compared to the original implementation of the KS method in its simplest form, using the Euclid Flagship mock galaxy catalogue. In particular, we estimate the quality of the reconstruction by comparing the two-point correlation functions and third- and fourth- order moments obtained from shear and convergence maps, and we analyse each systematic effect independently and simultaneously...

The data from the Euclid mission will enable the measurement of the photometric redshifts, angular positions, and weak lensing shapes for over a billion galaxies. This large dataset will allow for cosmological analyses using the angular clustering of galaxies and cosmic shear. The cross-correlation (XC) between these probes can tighten constraints and it is therefore important to quantify their impact for Euclid. In this study we carefully quantify the impact of XC not only on the final parameter constraints for different cosmological models, but also on the nuisance parameters. In particular, we aim at understanding the amount of additional information that XC can provide for parameters encoding systematic effects, such as galaxy bias or intrinsic alignments (IA). We follow the formalism presented in Euclid Collaboration: Blanchard et al. (2019) and make use of the codes validated therein. We show that XC improves the dark energy Figure of Merit (FoM) by a factor $\sim 5$, whilst it also reduces the uncertainties on galaxy bias by $\sim 17\%$ and the uncertainties on IA by a factor $\sim 4$. We observe that the role of XC on the final parameter constraints is qualitatively the same irrespective of the galaxy bias model used. We also show that XC can help in distinguishing between different IA models, and that if IA terms are neglected then this can lead to significant biases on the cosmological parameters. We find that the XC terms are necessary to extract the full information content from the data in future analyses. They help in better constraining the cosmological model, and lead to a better understanding of the systematic effects that contaminate these probes. Furthermore, we find that XC helps in constraining the mean of the photometric-redshift distributions, but it requires a more precise knowledge of this mean in order not to degrade the final FoM. [Abridged]

Context. Future weak lensing surveys, such as the Euclid mission, will attempt to measure the shapes of billions of galaxies in order to derive cosmological information. These surveys will attain very low levels of statistical error, and systematic errors must be extremely well controlled. In particular, the point spread function (PSF) must be estimated using stars in the field, and recovered with high accuracy. Aims. The aims of this paper are twofold. Firstly, we took steps toward a nonparametric method to address the issue of recovering the PSF field, namely that of finding the correct PSF at the position of any galaxy in the field, applicable to Euclid. Our approach relies solely on the data, as opposed to parametric methods that make use of our knowledge of the instrument. Secondly, we studied the impact of imperfect PSF models on the shape measurement of galaxies themselves, and whether common assumptions about this impact hold true in an Euclid scenario. Methods. We extended the recently proposed resolved components analysis approach, which performs super-resolution on a field of under-sampled observations of a spatially varying, image-valued function. We added a spatial interpolation component to the method, making it a true 2-dimensional PSF model. We compared our approach to PSFEx, then quantified the impact of PSF recovery errors on galaxy shape measurements through image simulations. Results. Our approach yields an improvement over PSFEx in terms of the PSF model and on observed galaxy shape errors, though it is at present far from reaching the required Euclid accuracy. We also find that the usual formalism used for the propagation of PSF model errors to weak lensing quantities no longer holds in the case of an Euclid-like PSF. In particular, different shape measurement approaches can react differently to the same PSF modeling errors.

Stage IV weak lensing experiments will offer more than an order of magnitude leap in precision. We must therefore ensure that our analyses remain accurate in this new era. Accordingly, previously ignored systematic effects must be addressed. In this work, we evaluate the impact of the reduced shear approximation and magnification bias, on the information obtained from the angular power spectrum. To first-order, the statistics of reduced shear, a combination of shear and convergence, are taken to be equal to those of shear. However, this approximation can induce a bias in the cosmological parameters that can no longer be neglected. A separate bias arises from the statistics of shear being altered by the preferential selection of galaxies and the dilution of their surface densities, in high-magnification regions. The corrections for these systematic effects take similar forms, allowing them to be treated together. We calculated the impact of neglecting these effects on the cosmological parameters that would be determined from Euclid, using cosmic shear tomography. To do so, we employed the Fisher matrix formalism, and included the impact of the super-sample covariance. We also demonstrate how the reduced shear correction can be calculated using a lognormal field forward modelling approach. These effects cause significant biases in Omega_m, sigma_8, n_s, Omega_DE, w_0, and w_a of -0.53 sigma, 0.43 sigma, -0.34 sigma, 1.36 sigma, -0.68 sigma, and 1.21 sigma, respectively. We then show that these lensing biases interact with another systematic: the intrinsic alignment of galaxies. Accordingly, we develop the formalism for an intrinsic alignment-enhanced lensing bias correction. Applying this to Euclid, we find that the additional terms introduced by this correction are sub-dominant.

The Euclid mission will observe well over a billion galaxies out to $z\sim6$ and beyond. This will offer an unrivalled opportunity to investigate several key questions for understanding galaxy formation and evolution. The first step for many of these studies will be the selection of a sample of quiescent and star-forming galaxies, as is often done in the literature by using well known colour techniques such as the `UVJ' diagram. However, given the limited number of filters available for the Euclid telescope, the recovery of such rest-frame colours will be challenging. We therefore investigate the use of observed Euclid colours, on their own and together with ground-based u-band observations, for selecting quiescent and star-forming galaxies. The most efficient colour combination, among the ones tested in this work, consists of the (u-VIS) and (VIS-J) colours. We find that this combination allows users to select a sample of quiescent galaxies complete to above $\sim70\%$ and with less than 15$\%$ contamination at redshifts in the range $0.75<z<1$. For galaxies at high-z or without the u-band complementary observations, the (VIS-Y) and (J-H) colours represent a valid alternative, with $>65\%$ completeness level and contamination below 20$\%$ at $1<z<2$ for finding quiescent galaxies. In comparison, the sample of quiescent galaxies selected with the traditional UVJ technique is only $\sim20\%$ complete at $z<3$, when recovering the rest-frame colours using mock Euclid observations. This shows that our new methodology is the most suitable one when only Euclid bands, along with u-band imaging, are available.

We provide predictions of the yield of $7<z<9$ quasars from the Euclid wide survey, updating the calculation presented in the Euclid Red Book in several ways. We account for revisions to the Euclid near-infrared filter wavelengths; we adopt steeper rates of decline of the quasar luminosity function (QLF; $\Phi$) with redshift, $\Phi\propto10^{k(z-6)}$, $k=-0.72$, and a further steeper rate of decline, $k=-0.92$; we use better models of the contaminating populations (MLT dwarfs and compact early-type galaxies); and we use an improved Bayesian selection method, compared to the colour cuts used for the Red Book calculation, allowing the identification of fainter quasars, down to $J_{AB}\sim23$. Quasars at $z>8$ may be selected from Euclid $OYJH$ photometry alone, but selection over the redshift interval $7<z<8$ is greatly improved by the addition of $z$-band data from, e.g., Pan-STARRS and LSST. We calculate predicted quasar yields for the assumed values of the rate of decline of the QLF beyond $z=6$. For the case that the decline of the QLF accelerates beyond $z=6$, with $k=-0.92$, Euclid should nevertheless find over 100 quasars with $7.0<z<7.5$, and $\sim25$ quasars beyond the current record of $z=7.5$, including $\sim8$ beyond $z=8.0$. The first Euclid quasars at $z>7.5$ should be found in the DR1 data release, expected in 2024. It will be possible to determine the bright-end slope of the QLF, $7<z<8$, $M_{1450}<-25$, using 8m class telescopes to confirm candidates, but follow-up with JWST or E-ELT will be required to measure the faint-end slope. Contamination of the candidate lists is predicted to be modest even at $J_{AB}\sim23$. The precision with which $k$ can be determined over $7<z<8$ depends on the value of $k$, but assuming $k=-0.72$ it can be measured to a 1 sigma uncertainty of 0.07.

Our aim is to quantify the impact of systematic effects on the inference of cosmological parameters from cosmic shear. We present an end-to-end approach that introduces sources of bias in a modelled weak lensing survey on a galaxy-by-galaxy level. Residual biases are propagated through a pipeline from galaxy properties (one end) through to cosmic shear power spectra and cosmological parameter estimates (the other end), to quantify how imperfect knowledge of the pipeline changes the maximum likelihood values of dark energy parameters. We quantify the impact of an imperfect correction for charge transfer inefficiency (CTI) and modelling uncertainties of the point spread function (PSF) for Euclid, and find that the biases introduced can be corrected to acceptable levels.

The Euclid space telescope will measure the shapes and redshifts of galaxies to reconstruct the expansion history of the Universe and the growth of cosmic structures. Estimation of the expected performance of the experiment, in terms of predicted constraints on cosmological parameters, has so far relied on different methodologies and numerical implementations, developed for different observational probes and for their combination. In this paper we present validated forecasts, that combine both theoretical and observational expertise for different cosmological probes. This is presented to provide the community with reliable numerical codes and methods for Euclid cosmological forecasts. We describe in detail the methodology adopted for Fisher matrix forecasts, applied to galaxy clustering, weak lensing and their combination. We estimate the required accuracy for Euclid forecasts and outline a methodology for their development. We then compare and improve different numerical implementations, reaching uncertainties on the errors of cosmological parameters that are less than the required precision in all cases. Furthermore, we provide details on the validated implementations that can be used by the reader to validate their own codes if required. We present new cosmological forecasts for Euclid. We find that results depend on the specific cosmological model and remaining freedom in each setup, i.e. flat or non-flat spatial cosmologies, or different cuts at nonlinear scales. The validated numerical implementations can now be reliably used for any setup. We present results for an optimistic and a pessimistic choice of such settings. We demonstrate that the impact of cross-correlations is particularly relevant for models beyond a cosmological constant and may allow us to increase the dark energy Figure of Merit by at least a factor of three.

In modern weak-lensing surveys, the common approach to correct for residual systematic biases in the shear is to calibrate shape measurement algorithms using simulations. These simulations must fully capture the complexity of the observations to avoid introducing any additional bias. In this paper we study the importance of faint galaxies below the observational detection limit of a survey. We simulate simplified Euclid VIS images including and excluding this faint population, and measure the shift in the multiplicative shear bias between the two sets of simulations. We measure the shear with three different algorithms: a moment-based approach, model fitting, and machine learning. We find that for all methods, a spatially uniform random distribution of faint galaxies introduces a shear multiplicative bias of the order of a few times $10^{-3}$. This value increases to the order of $10^{-2}$ when including the clustering of the faint galaxies, as measured in the Hubble Space Telescope Ultra-Deep Field. The magnification of the faint background galaxies due to the brighter galaxies along the line of sight is found to have a negligible impact on the multiplicative bias. We conclude that the undetected galaxies must be included in the calibration simulations with proper clustering properties down to magnitude 28 in order to reach a residual uncertainty on the multiplicative shear bias calibration of a few times $10^{-4}$, in line with the $2\times10^{-3}$ total accuracy budget required by the scientific objectives of the Euclid survey. We propose two complementary methods for including faint galaxy clustering in the calibration simulations.

We describe the first determination of thermal properties and size of the M-type asteroid (16) Psyche from interferometric observations obtained with the Mid-Infrared Interferometric Instrument (MIDI) of the Very Large Telescope Interferometer. We used a thermophysical model to interpret our interferometric data. Our analysis shows that Psyche has a low macroscopic surface roughness. Using a convex 3-D shape model obtained by Kaasalainen et al. (2002, Icarus 159, 369-395), we derived a volume-equivalent diameter for (16) Psyche of 247 +- 25 km or 238 +- 24 km, depending on the possible values of surface roughness. Our corresponding thermal inertia estimates are 133 or 114 J.m-2.s-0.5.K-1, with a total uncertainty estimated to 40 J.m-2.s-0.5.K-1. They are among the highest thermal inertia values ever measured for an asteroid of this size. We consider this as a new evidence of a metal-rich surface for the asteroid (16) Psyche.

The Gravitation Astrometric Measurement Experiment (GAME) is a mission concept based on astronomical techniques (astrometry and coronagraphy) for Fundamental Physics measurements, namely the \gamma\ and \beta\ parameters of the Parametrized Post-Newtonian formulation of gravitation theories extending the General Relativity. The science case also addresses cosmology, extra-solar planets, Solar system objects and fundamental stellar parameters. The mission concept is described, including the measurement approach and the instrument design.

Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study.

We describe interferometric observations of the asteroid (41) Daphne in the thermal infrared obtained with the Mid-Infrared Interferometric Instrument (MIDI) of the Very Large Telescope Interferometer (VLTI). We derived the size and the surface thermal properties of (41) Daphne by means of a thermophysical model (TPM), which is used for the interpretation of interferometric data for the first time. From our TPM analysis, we derived a volume equivalent diameter for (41) Daphne of 189 km, using a non-convex 3-D shape model derived from optical lightcurves and adaptive optics images (B. Carry, private communication). On the other hand, when using the convex shape of Kaasalainen et al. (2002. Icarus 159, 369-395) in our TPM analysis, the resulting volume equivalent diameter of (41) Daphne is between 194 and 209 km, depending on the surface roughness. The shape of the asteroid is used as an a priori information in our TPM analysis. No attempt is made to adjust the shape to the data. Only the size of the asteroid and its thermal parameters (albedo, thermal inertia and roughness) are adjusted to the data. We estimated our model systematic uncertainty to be of 4% and of 7% on the determination of the asteroid volume equivalent diameter depending on whether the non-convex or the convex shape is used, respectively. In terms of thermal properties, we derived a value of the surface thermal inertia smaller than 50 J m-2 s-0.5 K-1 and preferably in the range between 0 and 30 J m-2 s-0.5 K-1. Our TPM analysis also shows that Daphne has a moderate macroscopic surface roughness.

The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the light between the fringe tracker and the scientific instrument, the fringe tracker ensuring the co-phasing of the array, the scientific instrument delivering the interferometric observables and a calibration tool providing sources for internal alignment and interferometric calibrations. The two remaining sub-systems are the control system and the observation support software dedicated to the reduction of the interferometric data. This paper presents the global concept of VSI science path including the common path, the scientific instrument and the calibration tool. The scientific combination using a set of integrated optics multi-way beam combiners to provide high-stability visibility and closure phase measurements are also described. Finally we will address the performance budget of the global VSI instrument. The fringe tracker and scientific spectrograph will be shortly described.

The implementation of the simultaneous combination of several telescopes (from four to eight) available at Very Large Telescope Interferometer (VLTI) will allow the new generation interferometric instrumentation to achieve interferometric image synthesis with unprecedented resolution and efficiency. The VLTI Spectro Imager (VSI) is the proposed second-generation near-infrared multi-beam instrument for the Very Large Telescope Interferometer, featuring three band operations (J, H and K), high angular resolutions (down to 1.1 milliarcsecond) and high spectral resolutions. VSI will be equipped with its own internal Fringe Tracker (FT), which will measure and compensate the atmospheric perturbations to the relative beam phase, and in turn will provide stable and prolonged observing conditions down to the magnitude K=13 for the scientific combiner. In its baseline configuration, VSI FT is designed to implement, from the very start, the minimum redundancy combination in a nearest neighbor scheme of six telescopes over six baselines, thus offering better options for rejection of large intensity or phase fluctuations over each beam, due to the symmetric set-up. The planar geometry solution of the FT beam combiner is devised to be easily scalable either to four or eight telescopes, in accordance to the three phase development considered for VSI. The proposed design, based on minimum redundancy combination and bulk optics solution, is described in terms of opto-mechanical concept, performance and key operational aspects.

The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.

Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes.

We present two wide-field (5'x5'), diffraction limited, broad-band 10 and 20 micron images of the Orion Nebula, plus six 7-13 micron narrow-band images of BN/KL taken at the 3.8m UKIRT telescope. The wide-field images are mosaics of 35"x35" frames reconstructed using a new restoration method developed for this project. They show the filamentary structure of the dust emission and reveal a new remarkable group of arc-like structures ~1' to the South of the Trapezium. The morphology of the Ney-Allen nebula suggests a complex kinematical status at the center of the Cluster. We find indications that the B0.5V star theta1 Ori-D, is surrounded by a photoevaporated circumstellar disk. Among the four historic Trapezium OB stars, this is the only one without a binary companion, suggesting that stellar multiplicity and the presence of massive circumstellar disks may be mutually exclusive. In the BN/KL complex we detect optically thin silicate emission on top of the deep 10 micron absorption feature. We map the foreground optical depth, color temperature and mid-IR luminosity of the embedded sources. We resolve a conspicuous point source at the location of the IRc2-A knot. The spectral profile of the 10 micron feature is compatible with grain crystallization. We detect several point sources In the OMC-1 South region and discuss their association with the mass loss observed at optical and mm wavelengths. Finally, we list the position and photometry of 177 point sources. With two possible exceptions, all point sources detected at shorter wavelengths display 10 micron emission well above the photospheric level. The model of Robberto et al. (2002, ApJ, 578, 897) provides the simplest explanation for the mid-IR excess.

We have monitored the angularly resolved near infrared and 3.1 micron ice-band flux of the components of the young binary Haro 6-10 on 23 occasions during the years 1988 to 2000. Our observations reveal that both the visible star Haro 6-10 (Haro 6-10S) and its infrared companion (Haro 6-10N) show significant variation in flux on time scales as short as a month. The substantial flux decrease of Haro 6-10S over the last four years carries the reddening signature of increased extinction. However, a comparable K-band flux increase observed in the IRC is associated with a dimming in the H-band and cannot be explained by lower extinction. Absorption in the 3.1 micron water-ice feature was always greater towards the IRC during our observations, indicating a larger amount of obscuring material along its line of sight. We detect variability in the ice-band absorption towards Haro 6-10S and Haro 6-10N, significant at the 3.5 sigma and 2.0 sigma levels, respectively.