The interaction between a YSO stellar magnetic field and its protostellar disc can result in stellar accretional flows and outflows from the inner disc rim. Gas flows with a velocity component perpendicular to disc midplane subject particles to centrifugal acceleration away from the protostar, resulting in particles being catapulted across the face of the disc. The ejected material can produce a "dust fan", which may be dense enough to mimic the appearance of a "puffed-up" inner disc rim. We derive analytic equations for the time dependent disc toroidal field, the disc magnetic twist, the size of the stable toroidal disc region, the jet speed and the disc region of maximal jet flow speed. We show how the observed infrared variability of the pre-transition disc system LRLL~31 can be modelled by a dust ejecta fan from the inner-most regions of the disc whose height is partially dependent on the jet flow speed. The greater the jet flow speed, the higher is the potential dust fan scale height. An increase in mass accretion onto the star tends to increase the height and optical depth of the dust ejection fan, increasing the amount of 1--8~$\mu$m radiation. The subsequent shadow reduces the amount of light falling on the outer disc and decreases the 8-- 40~$\mu$m radiation. A decrease in the accretion rate reverses this scenario, thereby producing the observed "see-saw" infrared variability.

Type 3 chondritic meteorites often contain chondrules and refractory inclusions that are coated with accretionary, fine-grained rims (FGRs). FGRs are of low porosity, were subject to centrally directed pressure, may contain high temperature products like microchondrules and there is a linear relationship between the rim thickness and the radius of the enclosed object. FGRs are thought to have formed by the gentle adhesion of dust onto the central object with the subsequent compression of this fluffy rim within the parent body. However, this model does not explain the low porosity, micro-chondrules and centralized pressure. This model also has difficulties explaining the linear relationship between rim thickness and object size including the existence of a non-zero constant in that linear relationship. We propose that FGRs formed by the relatively high-speed interaction between dust and the object, where high initial impact speed produced abrasion and, possibly, microchondrules. FGR formation occurred over a range of lower speeds aided by vacuum adhesion of fragments from the impacting dust particles. This model naturally produces the rim thickness linear relationship with non-zero constant, low porosity and centrally directed pressure. We call this process kinetic dust aggregation (KDA), which is another name for the aerosol deposition processes used in industry. KDA may be a tentative, part explanation of how dust aggregation occurs in protostellar disks on the pathway from dust to planets.

A small subset of young stellar objects (YSOs) exhibit "see-saw" temporal variations in their mid-infrared SED; as the flux short-ward of a fulcrum wavelength ($\lambda_{f}$) increases the flux long-wards of this wavelength decreases (and vice-versa) over timescales of weeks to years. While previous studies have shown that an opaque, axisymmetric occulter of variable height can cause this behaviour in the SED of these objects, the conditions under which a single $\lambda_{f}$ occurs have not previously been determined, nor the factors determining its value. Using radiative transfer modelling, we conduct a parametric study of the exemplar of this class, LRLL 31 to explore this phenomenon, and confirm that the cause of this flux variation is likely due to the change in height of the optically thick inner rim of the accretion disc at the dust sublimation radius, or some other phenomenon which results in a similar appearance. We also determine that a fulcrum wavelength only occurs for high inclinations, where the line of sight intersects the accretion disc. Accepting that the disc of LRLL 31 is highly inclined, the inner rim radius, radial and vertical density profiles are independently varied to gauge what effect this had on $\lambda_{f}$ and its position relative to the silicate feature near $10 \mu$m. While $\lambda_{f}$ is a function of each of these parameters, it is found to be most strongly dependent on the vertical density exponent $\beta$. All other factors being held constant, only for flatter discs ($\beta < 1.2$) did we find a $\lambda_{f}$ beyond the silicate feature.

Calcium Aluminium Inclusions (CAIs) formed in the Solar System, some 4,567 million years ago. CAIs are almost always surrounded by Wark-Lovering Rims (WLRs), which are a sequence of thin, mono/bi-mineralic layers of refractory minerals, with a total thickness in the range of 1 to 100 microns. Recently, some CAIs have been found that have tektite-like bowl-shapes. To form such shapes, the CAI must have travelled through a rarefied gas at hypersonic speeds. We show how CAIs may have been ejected from the inner solar accretion disc via the centrifugal interaction between the solar magnetosphere and the inner disc rim. They subsequently punched through the hot, inner disc rim wall at hypersonic speeds. This re-entry heating partially or completely evaporated the CAIs. Such evaporation could have significantly increased the metal abundances of the inner disc rim. High speed movement through the inner disc produced WLRs. To match the observed thickness of WLRs required metal abundances at the inner disc wall that are of order ten times that of standard solar abundances. The CAIs cooled as they moved away from the protosun, the deduced CAI cooling rates are consistent with the CAI cooling rates obtained from experiment and observation. The speeds and gas densities required to form bowl-shaped CAIs are also consistent with the expected speeds and gas densities for larger, ~ 1 cm, CAIs punching through an inner accretion disc wall.

Infrared observations provide the dust composition in the protoplanetary discs surface layers, but can not probe the dust chemistry in the midplane, where planet formation occurs. Meteorites show that dynamics was important in determining the dust distribution in the Solar Nebula and needs to be considered if we are to understand the global chemistry in discs. 1D radial condensation sequences can only simulate one disc layer at a time and cannot describe the global chemistry or the complexity of meteorites. To address these limitations, we compute for the first time the two dimensional distribution of condensates in the inner Solar Nebula using a thermodynamic equilibrium model, and derive timescales for vertical settling and radial migration of dust. We find two enstatite-rich zones within 1 AU from the young Sun: a band ~0.1 AU thick in the upper optically-thin layer of the disc interior to 0.8 AU, and in the optically-thick disc midplane out to ~0.4 AU. The two enstatite-rich zones support recent evidence that Mercury and enstatite chondrites shared a bulk material with similar composition. Our results are also consistent with infrared observation of protoplanetary disc which show emission of enstatite-rich dust in the inner surface of discs. The resulting chemistry and dynamics suggests that the formation of the bulk material of enstatite chondrites occurred in the inner surface layer of the disc, within 0.4~AU. We also propose a simple alternative scenario in which gas fractionation and vertical settling of the condensates lead to an enstatite-chondritic bulk material.

A number of objects in primitive meteorites have oxygen isotopic compositions that place them on a distinct, mass-independent fractionation line with a slope of one on a three-isotope plot. The most popular model for describing how this fractionation arose assumes that CO self-shielding produced 16O-rich CO and 16O-poor H2O, where the H2O subsequently combined with interstellar dust to form relatively 16O-poor solids within the Solar Nebula. Another model for creating the different reservoirs of 16O-rich gas and 16O-poor solids suggests that these reservoirs were produced by Galactic chemical evolution (GCE) if the Solar System dust component was somewhat younger than the gas component and both components were lying on the line of slope one in the O three-isotope plot. We argue that GCE is not the cause of mass-independent fractionation of the oxygen isotopes in the Solar System. The GCE scenario is in contradiction with observations of the 18O/17O ratios in nearby molecular clouds and young stellar objects. It is very unlikely for GCE to produce a line of slope one when considering the effect of incomplete mixing of stellar ejecta in the interstellar medium. Furthermore, the assumption that the Solar System dust was younger than the gas requires unusual timescales or the existence of an important stardust component that is not theoretically expected to occur nor has been identified to date.

The composition of the most primitive Solar System condensates, such as calcium-aluminum-rich inclusions (CAI) and micron-sized corundum grains, show that short-lived radionuclides (SLR), e.g., 26Al, were present in the early Solar System. Their abundances require a local origin, which however is far from being understood. We present for the first time the abundances of several SLR up to 60Fe predicted from stars with initial mass in the range roughly 7-11 Msun. These stars evolve through core H, He, and C burning. After core C burning they go through a "Super"-asymptotic giant branch (Super-AGB) phase, with the H and He shells activated alternately, episodic thermal pulses in the He shell, a very hot temperature at the base of the convective envelope (~ 10^8 K), and strong stellar winds driving the H-rich envelope into the surrounding interstellar medium. The final remnants of the evolution of Super-AGB stars are mostly O-Ne white dwarfs. Our Super-AGB models produce 26Al/27Al yield ratios ~ 0.02 - 0.26. These models can account for the canonical value of the 26Al/27Al ratio using dilutions with the Solar Nebula of the order of 1 part of Super-AGB mass per several 10^2 to several 10^3 of Solar Nebula mass, resulting in associated changes in the O composition in the range 3 permil to 20 permil. This is in agreement with observations of the O isotopic ratios in primitive Solar System condensated, which do not carry the signature of a stellar pollutor. The radionuclides 41Ca and 60Fe are produced by neutron captures in Super-AGB stars and their meteoritic abundances are also matched by some of our models, depending on the nuclear and stellar physics uncertainties as well as the meteoritic experimental data. We also expect and are currently investigating Super-AGB production of SLR heavier than iron, such as 107Pd.

As gas flowed from the solar accretion disk or solar nebula onto the proto-Sun, magnetic pressure gradients in the solar magnetosphere and the inner solar nebula provided an environment where some of this infalling flow was diverted to produce a low pressure, high temperature, gaseous, "infall" atmosphere around the inner solar nebula. The pressure in this inner disk atmosphere was mainly dependant on the accretion flow rate onto the star. High flow rates implied relatively high pressures, which decreased over time as the accretion rate decreased. In the first hundred thousand years after the formation of the solar nebula, accretional flow gas pressures were high enough to create submicron-sized Refractory Metal Nuggets (RMNs) - the precursors to Calcium Aluminum Inclusions (CAIs). Optimal temperatures and pressures for RMN formation may have occurred between 20,000 to 100,000 years after the formation of the solar nebula. It is possible that conditions were conducive to RMN/CAI formation over an eighty thousand year timescale. The "infall" atmosphere and the condensation of refractory particles within this atmosphere may be observable around the inner disks of other protostellar systems. The interaction of forces from magnetic fields with the radiation pressure from the proto-Sun and the inner solar accretion disk potentially produced an optical-magnetic trap above and below the inner solar nebula, which provided a relatively stable environment in which the RMNs/proto-CAIs could form and grow. These RMN formation sites only existed during accretion events from the proto-solar disk onto the proto-Sun. As such, the formation and growth time of a particular RMN was dependent on the timescale of its nascent accretion event.

We utilize a chemical equilibrium code in order to study the condensation process which occurs in protoplanetary discs during the formation of the first solids. The model specifically focuses on the thermodynamic behaviour on the solid species assuming the regular solution model. For each solution, we establish the relationship between the activity of the species, the composition and the temperature using experimental data from the literature. We then apply the Gibbs free energy minimization method and study the resulting condensation sequence for a range of temperatures and pressures within a protoplanetary disc. Our results using the regular solution model show that grains condense over a large temperature range and therefore throughout a large portion of the disc. In the high temperature region (T > 1400 K) Ca-Al compounds dominate and the formation of corundum is sensitive to the pressure. The mid-temperature region is dominated by Fe(s) and silicates such as Mg2SiO4 and MgSiO3 . The chemistry of forsterite and enstatite are strictly related, and our simulations show a sequence of forsterite-enstatite-forsterite with decreasing temperature. In the low temperature regions (T < 600 K) a range of iron compounds and sulfides form. We also run simulations using the ideal solution model and see clear differences in the resulting condensation sequences with changing solution model In particular, we find that the turning point in which forsterite replaces enstatite in the low temperature region is sensitive to the solution model. Our results show that the ideal solution model is often a poor approximation to experimental data at most temperatures important in protoplanetary discs. We find some important differences in the resulting condensation sequences when using the regular solution model, and suggest that this model should provide a more realistic condensation sequence.

It has been suggested that shock waves in the solar nebula formed the high temperature materials observed in meteorites and comets. It is shown that the temperatures at the inner rim of the solar nebula could have been high enough over a sufficient length of time to produce chondrules, CAIs, refractory dust grains and other high-temperature materials observed in comets and meteorites. The solar bipolar jet flow may have produced an enrichment of 16O in the solar nebula over time and the chondrule oxygen isotopic reservoirs are possibly due to temporal changes in the relative position of the inner edge of the solar nebula and the subsequent strength of the solar bipolar jet flow. As such, nebula heating models, such as the shock model, are not required to explain the formation of most high-temperature chondritic components

We discuss the star-disk electric circuit for a young stellar object (YSO) and calculate the expected torques on the star and the disk. We obtain the same disk magnetic field and star-disk torques as given by standard magnetohydrodynamic (MHD) analysis. We show how a short circuit in the star-disk electric circuit may produce a magnetically-driven jet flow from the inner edge of a disk surrounding a young star. An unsteady bipolar jet flow is produced that flows perpendicular to the disk plane. Jet speeds of order hundreds of kilometres per second are possible, while the outflow mass loss rate is proportional to the mass accretion rate and is a function of the disk inner radius relative to the disk co-rotation radius.

A chondrule formation theory is presented where the chondrule formation zone is located within 0.1 AU of the protosun. This hot, optically thick, inner zone of the solar accretion disk is coincident with the formation region of the protosolar jet. The model assumes that particles, ranging in diameter from 1 micron to 1 cm, can be ejected from the inner-accretion disk by the jet flow, and that the angular momentum of this material is sufficient to eject it from the jet flow. Given these assumptions, any material so ejected, will fly across the face of the accretion disk at speeds greater than the escape velocity of the system. This material can only be recaptured through the action of gas drag. Such a capture process naturally produces aerodynamic size sorting of chondrules and chondrule fragments, while the ejection of refractory dust provides a possible explanation for the observed complementarity between matrix and chondrules. This transfer of material will result in the loss of angular momentum from the upper atmosphere of the outer accretion disk and thereby facilitate the accretion of matter onto the protosun.