Normalized to: Lessio, L.
[1]
oai:arXiv.org:1908.03396 [pdf] - 1932765
(Very) Fast astronomical photometry for meter-class telescopes
Zampieri, L.;
Naletto, G.;
Barbieri, C.;
Burtovoi, A.;
Fiori, M.;
Spolon, A.;
Ochner, P.;
Lessio, L.;
Umbriaco, G.;
Barbieri, M.
Submitted: 2019-08-09
Our team at the INAF-Astronomical Observatory of Padova and the University of
Padova is engaged in the design, construction and operations of instruments
with very high time accuracy in the optical band for applications to High Time
Resolution Astrophysics and Quantum Astronomy. Two instruments were built to
perform photon counting with sub-nanosecond temporal accuracy, Aqueye+ and
Iqueye. Aqueye+ is regularly mounted at the 1.8m Copernicus telescope in
Asiago, while Iqueye was mounted at several 4m class telescopes around the
world and is now attached through the Iqueye Fiber Interface at the 1.2m
Galileo telescope in Asiago. They are used to perform coordinated high time
resolution optical observations and, for the first time ever, experiments of
optical intensity interferometry on a baseline of a few kilometers. I will
report on recent technological developments and scientific results obtained
within the framework of this project.
[2]
oai:arXiv.org:1902.00738 [pdf] - 1875316
Development of the Warm Astrometric Mask for MICADO astrometry
calibration
Rodeghiero, Gabriele;
Sawczuck, Miriam;
Pott, Jörg Uwe;
Glück, Martin;
Biancalani, Enrico;
Häberle, Maximilian;
Reichert, Hannes;
Pernechele, Claudio;
Naranjo, Vianak;
Ventas, Javier Moreno;
Bizenberger, Peter;
Lessio, Luigi
Submitted: 2019-02-02
The achievement of $\mu$arcsec relative astrometry with ground-based, near
infrared, extremely large telescopes requires a significant endeavour of
calibration strategies. In this paper we address the removal of instrument
optical distortions coming from the ELT first light instrument MICADO and its
adaptive optics system MAORY by means of an astrometric calibration mask. The
results of the test campaign on a prototype mask (scale 1:2) has probed the
manufacturing precision down to $\sim$ 50nm/1mm scale, leading to a relative
precision $\delta\sigma \sim 5e-5$. The assessed manufacturing precision
indicates that an astrometric relative precision of $\delta\sigma \sim 5e-5 =
\frac{50\mu as}{1 arcsec}$ is in principle achievable, disclosing $\mu$arcsec
near infrared astrometry behind an extremely large telescope. The impact of
$\sim$ 10-100 nm error residuals on the mask pinholes position is tolerable at
a calibration level as confirmed by ray tracing simulations of realistic MICADO
distortion patterns affected by mid spatial frequencies residuals. We
demonstrated that the MICADO astrometric precision of 50 $\mu$as is achievable
also in presence of a mid spatial frequencies pattern and manufacturing errors
of the WAM by fitting the distorted WAM pattern seen through the instrument
with a 10$^{th}$ order Legendre polynomial.
[3]
oai:arXiv.org:1810.01096 [pdf] - 1759427
A 3.9 km baseline intensity interferometry photon counting experiment
Submitted: 2018-10-02
In the last years we have operated two very similar ultrafast photon counting
photometers (Iqueye and Aqueye+) on different telescopes. The absolute time
accuracy in time tagging the detected photon with these instruments is of the
order of 500 ps for hours of observation, allowing us to obtain, for example,
the most accurate ever light curve in visible light of the optical pulsars.
Recently we adapted the two photometers for working together on two telescopes
at Asiago (Italy), for realizing an Hanbury-Brown and Twiss Intensity
Interferometry like experiment with two 3.9 km distant telescopes. In this
paper we report about the status of the activity and on the very preliminary
results of our first attempt to measure the photon intensity correlation.
[4]
oai:arXiv.org:1809.01001 [pdf] - 1789493
High-Contrast study of the candidate planets and protoplanetary disk
around HD~100546
Sissa, E.;
Gratton, R.;
Garufi, A.;
Rigliaco, E.;
Zurlo, A.;
Mesa, D.;
Langlois, M.;
de Boer, J.;
Desidera, S.;
Ginski, C.;
Lagrange, A. -M.;
Maire, A. -L.;
Vigan, A.;
Dima, M.;
Antichi, J.;
Baruffolo, A.;
Bazzon, A.;
Benisty, M.;
Beuzit, J. -L.;
Biller, B.;
Boccaletti, A.;
Bonavita, M.;
Bonnefoy, M.;
Brandner, W.;
Bruno, P.;
Buenzli, E.;
Cascone, E.;
Chauvin, G.;
Cheetham, A.;
Claudi, R. U.;
Cudel, M.;
De Caprio, V.;
Dominik, C.;
Fantinel, D.;
Farisato, G.;
Feldt, M.;
Fontanive, C.;
Galicher, R.;
Giro, E.;
Hagelberg, J.;
Incorvaia, S.;
Janson, M.;
Kasper, M.;
Keppler, M.;
Kopytova, T.;
Lagadec, E.;
Lannier, J.;
Lazzoni, C.;
LeCoroller, H.;
Lessio, L.;
Ligi, R.;
Marzari, F.;
Menard, F.;
Meyer, M. R.;
Mouillet, D.;
Peretti, S.;
Perrot, C.;
Potiron, P. J.;
Rouan, D.;
Salasnich, B.;
Salter, G.;
Samland, M.;
Schmidt, T.;
Scuderi, S.;
Wildi, F.
Submitted: 2018-09-04
The nearby Herbig Be star HD100546 is known to be a laboratory for the study
of protoplanets and their relation with the circumstellar disk that is carved
by at least 2 gaps. We observed the HD100546 environment with high contrast
imaging exploiting several different observing modes of SPHERE, including
datasets with/without coronagraphs, dual band imaging, integral field
spectroscopy and polarimetry. The picture emerging from these different data
sets is complex. Flux-conservative algorithms images clearly show the disk up
to 200au. More aggressive algorithms reveal several rings and warped arms
overlapping the main disk. The bright parts of this ring lie at considerable
height over the disk mid-plane at about 30au. Our images demonstrate that the
brightest wings close to the star in the near side of the disk are a unique
structure, corresponding to the outer edge of the intermediate disk at ~40au.
Modeling of the scattered light from the disk with a geometrical algorithm
reveals that a moderately thin structure can well reproduce the light
distribution in the flux-conservative images. We suggest that the gap between
44 and 113 au span between the 1:2 and 3:2 resonance orbits of a massive body
located at ~70au that might coincide with the candidate planet HD100546b
detected with previous thermal IR observations. In this picture, the two wings
can be the near side of a ring formed by disk material brought out of the disk
at the 1:2 resonance with the same massive object. While we find no clear
evidence confirming detection of the planet candidate HD100546c in our data, we
find a diffuse emission close to the expected position of HD100546b. This
source can be described as an extremely reddened substellar object surrounded
by a dust cloud or its circumplanetary disk. Its astrometry is broadly
consistent with a circular orbital motion on the disk plane.
[5]
oai:arXiv.org:1808.00788 [pdf] - 1726845
A testing facility for AO on-sky demonstrations at the Copernico's
Telescope within the ADONI framework
Chinellato, S.;
Ragazzoni, R.;
Farinato, J.;
Greggio, D.;
Dima, M.;
Biondi, F.;
Benetti, S.;
Bergomi, M.;
Cappellaro, E.;
Carolo, E.;
Chiomento, V.;
Frigo, A.;
Lessio, L.;
Magrin, D.;
Marafatto, L.;
Martorana, G.;
Portaluri, E.;
Rebeschini, M.;
Tomasella, L.;
Traverso, L.;
Turatto, M.;
Umbriaco, G.;
Vassallo, D.;
Viotto, V.
Submitted: 2018-08-02
In the context of ADONI - the ADaptive Optics National laboratory of INAF -
we are arranging for a facility, accessible to the AO community, in which
visiting multi-purpose instrumentation, e.g. systems and prototypes of
innovative AO concepts, may be directly tested on sky. The facility is located
at the 182cm Copernico telescope in Asiago, the largest telescope in Italy, at
its Coude focus, for which refurbishment activities are carried out, given that
this focus was initially foreseen in the design, but never implemented and used
till today. The facility hosts a laboratory where specialized visiting AO
instrumentation may be properly accommodated on an optical bench for on-sky
demonstrations. We present the current status of the facility, describing the
opto-mechanical design implemented at the telescope that allows to redirect the
light toward the Coude focus, the tests on the opto-mechanics carried on for
stability verification, the integration of the optical and mechanical
components within the preexisting structure.
[6]
oai:arXiv.org:1808.00364 [pdf] - 1726387
SHARK-NIR, the coronagraphic camera for LBT, moving toward construction
Farinato, Jacopo;
Bacciotti, Francesca;
Baffa, Carlo;
Baruffolo, Andrea;
Bergomi, Maria;
Bianco, Andrea;
Bongiorno, Angela;
Carbonaro, Luca;
Carolo, Elena;
Carlotti, Alexis;
Chinellato, Simonetta;
Close, Laird;
De Pascale, Marco;
Dima, Marco;
D'Orazi, Valentina;
Esposito, Simone;
Fantinel, Daniela;
Farisato, Giancarlo;
Gaessler, Wolgang;
Giallongo, Emanuele;
Greggio, Davide;
Guyon, Olivier;
Hinz, Philip;
Lessio, Luigi;
Lisi, Franco;
Magrin, Demetrio;
Marafatto, Luca;
Mesa, Dino;
Mohr, Lars;
Montoya, Manny;
Pedichini, Fernando;
Pinna, Enrico;
Puglisi, Alfio;
Ragazzoni, Roberto;
Salasnich, Bernardo;
Stangalini, Marco;
Vassallo, Daniele;
Verinaud, Christophe;
Viotto, Valentina;
Zanutta, Alessio
Submitted: 2018-08-01
SHARK-NIR is one of the two coronagraphic instruments proposed for the Large
Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging
in the visible domain), it will offer the possibility to do binocular
observations combining direct imaging, coronagraphic imaging and coronagraphic
low resolution spectroscopy in a wide wavelength domain, going from 0.5{\mu}m
to 1.7{\mu}m. Additionally, the contemporary usage of LMIRCam, the
coronagraphic LBTI NIR camera, working from K to L band, will extend even more
the covered wavelength range. In January 2017 SHARK-NIR underwent a successful
final design review, which endorsed the instrument for construction and future
implementation at LBT. We report here the final design of the instrument, which
foresees two intermediate pupil planes and three focal planes to accomodate a
certain number of coronagraphic techniques, selected to maximize the instrument
contrast at various distances from the star. Exo-Planets search and
characterization has been the science case driving the instrument design, but
the SOUL upgrade of the LBT AO will increase the instrument performance in the
faint end regime, allowing to do galactic (jets and disks) and extra-galactic
(AGN and QSO) science on a relatively wide sample of targets, normally not
reachable in other similar facilities.
[7]
oai:arXiv.org:1807.06281 [pdf] - 2038186
Design of a SiPM-based cluster for the Large Size Telescope camera of
CTA
Mallamaci, M.;
Baibussinov, B.;
Busetto, G.;
Corti, D.;
De Angelis, A.;
Di Pierro, F.;
Doro, M.;
Lessio, L.;
Mariotti, M.;
Prandini, E.;
Rando, R.;
Vallania, P.;
Vigorito, C. F.
Submitted: 2018-07-17
A Silicon Photomultiplier (SiPM)-based photodetector is being built to
demonstrate its feasibility for an alternative silicon-based camera design for
the Large Size Telescope (LST) of the Cherenkov Telescope Array. It has been
designed to match the size of the standard Photomultiplier Tube (PMT) cluster
unit and to be compatible with mechanics, electronics and focal plane optics of
the first LST camera. Here, we describe the overall SiPM cluster design along
with the main differences with respect to the currently used PMT cluster unit.
The fast electronics of the SiPM pixel and its layout are also presented. In
order to derive the best working condition for the final unit, we measured the
SiPM performances in terms of gain, photo-detection efficiency and cross-talk.
One pixel, a unit of 14 SiPMs, has been built. We will discuss also some
preliminary results regarding this device and we will highlight the future
steps of this project.
[8]
oai:arXiv.org:1712.05828 [pdf] - 1678501
New spectro-photometric characterization of the substellar object HR
2562 B using SPHERE
Mesa, D.;
Baudino, J. -L.;
Charnay, B.;
D'Orazi, V.;
Desidera, S.;
Boccaletti, A.;
Gratton, R.;
Bonnefoy, M.;
Delorme, P.;
Langlois, M.;
Vigan, A.;
Zurlo, A.;
Maire, A. -L.;
Janson, M.;
Antichi, J.;
Baruffolo, A.;
Bruno, P.;
Cascone, E.;
Chauvin, G.;
Claudi, R. U.;
De Caprio, V.;
Fantinel, D.;
Farisato, G.;
Feldt, M.;
Giro, E.;
Hagelberg, J.;
Incorvaia, S.;
Lagadec, E.;
Lagrange, A. -M.;
Lazzoni, C.;
Lessio, L.;
Salasnich, B.;
Scuderi, S.;
Sissa, E.;
Turatto, M.
Submitted: 2017-12-15, last modified: 2017-12-19
HR2562 is an F5V star located at ~33 pc from the Sun hosting a substellar
companion that was discovered using the GPI instrument. The main objective of
the present paper is to provide an extensive characterisation of the substellar
companion, by deriving its fundamental properties. We observed HR 2562 with the
near-infrared branch (IFS and IRDIS) of SPHERE at the VLT. During our
observations IFS was operating in the YJ band, while IRDIS was observing with
the $H$ broad-band filter. The data were reduced with the dedicated SPHERE GTO
pipeline, which is custom-designed for this instrument. On the reduced images,
we then applied the post-processing procedures that are specifically prepared
to subtract the speckle noise. The companion is clearly detected in both IRDIS
and IFS datasets. We obtained photometry in three different spectral bands. The
comparison with template spectra allowed us to derive a spectral type of T2-T3
for the companion. Using both evolutionary and atmospheric models we inferred
the main physical parameters of the companion obtaining a mass of
32+/-14$~MJup, T_{eff}=1100+/-200 K and log(g)=4.75+/-0.41.
[9]
oai:arXiv.org:1710.03019 [pdf] - 1656138
Dynamical models to explain observations with SPHERE in planetary
systems with double debris belts
Lazzoni, C.;
Desidera, S.;
Marzari, F.;
Boccaletti, A.;
Langlois, M.;
Mesa, D.;
Gratton, R.;
Kral, Q.;
Pawellek, N.;
Olofsson, J.;
Bonnefoy, M.;
Chauvin, G.;
Lagrange, A. M.;
Vigan, A.;
Sissa, E.;
Antichi, J.;
Avenhaus, H.;
Baruffolo, A.;
Baudino, J. L.;
Bazzon, A.;
Beuzit, J. L.;
Biller, B.;
Bonavita, M.;
Brandner, W.;
Bruno, P.;
Buenzli, E.;
Cantalloube, F.;
Cascone, E.;
Cheetham, A.;
Claudi, R. U.;
Cudel, M.;
Daemgen, S.;
De Caprio, V.;
Delorme, P.;
Fantinel, D.;
Farisato, G.;
Feldt, M.;
Galicher, R.;
Ginski, C.;
Girard, J.;
Giro, E.;
Janson, M.;
Hagelberg, J.;
Henning, T.;
Incorvaia, S.;
Kasper, M.;
Kopytova, T.;
Lannier, J.;
LeCoroller, H.;
Lessio, L.;
Ligi, R.;
Maire, A. L.;
Ménard, F.;
Meyer, M.;
Milli, J.;
Mouillet, D.;
Peretti, S.;
Perrot, C.;
Rouan, D.;
Samland, M.;
Salasnich, B.;
Salter, G.;
Schmidt, T.;
Scuderi, S.;
Sezestre, E.;
Turatto, M.;
Udry, S.;
Wildi, F.;
Zurlo, A.
Submitted: 2017-10-09
A large number of systems harboring a debris disk show evidence for a double
belt architecture. One hypothesis for explaining the gap between the belts is
the presence of one or more planets dynamically carving it. This work aims to
investigate this scenario in systems harboring two components debris disks. All
the targets in the sample were observed with the SPHERE instrument which
performs high-contrast direct imaging. Positions of the inner and outer belts
were estimated by SED fitting of the infrared excesses or, when available, from
resolved images of the disk. Very few planets have been observed so far in
debris disks gaps and we intended to test if such non-detections depend on the
observational limits of the present instruments. This aim is achieved by
deriving theoretical predictions of masses, eccentricities and semi-major axes
of planets able to open the observed gaps and comparing such parameters with
detection limits obtained with SPHERE. The relation between the gap and the
planet is due to the chaotic zone around the orbit of the planet. The radial
extent of this zone depends on the mass ratio between the planet and the star,
on the semi-major axis and on the eccentricity of the planet and it can be
estimated analytically. We apply the formalism to the case of one planet on a
circular or eccentric orbit. We then consider multi-planetary systems: 2 and 3
equal-mass planets on circular orbits and 2 equal-mass planets on eccentric
orbits in a packed configuration. We then compare each couple of values (M,a),
derived from the dynamical analysis of single and multiple planetary models,
with the detection limits obtained with SPHERE. Our results show that the
apparent lack of planets in gaps between double belts could be explained by the
presence of a system of two or more planets possibly of low mass and on an
eccentric orbits whose sizes are below the present detection limits.
[10]
oai:arXiv.org:1707.06238 [pdf] - 1602569
Orbiting a binary: SPHERE characterisation of the HD 284149 system
Bonavita, Mariangela;
D'Orazi, V.;
Mesa, D.;
Fontanive, C.;
Desidera, S.;
Messina, S.;
Daemgen, S.;
Gratton, R.;
Vigan, A.;
Bonnefoy, M.;
Zurlo, A.;
Antichi, J.;
Avenhaus, H.;
Baruffolo, A.;
Baudino, J. L.;
Beuzit, J. L.;
Boccaletti, A.;
Bruno, P.;
Buey, T.;
Carbillet, M.;
Cascone, E.;
Chauvin, G.;
Claudi, R. U.;
De Caprio, V.;
Fantinel, D.;
Farisato, G.;
Feldt, M.;
Galicher, R.;
Giro, E.;
Gry, C.;
Hagelberg, J.;
Incorvaia, S.;
Janson, M.;
Jaquet, M.;
Lagrange, A. M.;
Langlois, M.;
Lannier, J.;
Coroller, H. Le;
Lessio, L.;
Ligi, R.;
Maire, A. L.;
Menard, F.;
Perrot, C.;
Peretti, S.;
Petit, C.;
Ramos, J.;
Roux, A.;
Salasnich, B.;
Salter, G.;
Samland, M.;
Scuderi, S.;
Schlieder, J.;
Surez, M.;
Turatto, M.;
Weber, L.
Submitted: 2017-07-19
In this paper we present the results of the SPHERE observation of the HD
284149 system, aimed at a more detailed characterisation of both the primary
and its brown dwarf companion. We observed HD 284149 in the near-infrared with
SPHERE, using the imaging mode (IRDIS+IFS) and the long-slit spectroscopy mode
(IRDIS-LSS). The data were reduced using the dedicated SPHERE pipeline, and
algorithms such as PCA and TLOCI were applied to reduce the speckle pattern.
The IFS images revealed a previously unknown low-mass (~0.16$M_{\odot}$)
stellar companion (HD 294149 B) at ~0.1$^{\prime\prime}$, compatible with
previously observed radial velocity differences, as well as proper motion
differences between Gaia and Tycho-2 measurements. The known brown dwarf
companion (HD 284149 b) is clearly visible in the IRDIS images. This allowed us
to refine both its photometry and astrometry. The analysis of the medium
resolution IRDIS long slit spectra also allowed a refinement of temperature and
spectral type estimates. A full reassessment of the age and distance of the
system was also performed, leading to more precise values of both mass and
semi-major axis. As a result of this study, HD 284149 ABb therefore becomes the
latest addition to the (short) list of brown dwarfs on wide circumbinary
orbits, providing new evidence to support recent claims that object in such
configuration occur with a similar frequency to wide companions to single
stars.
[11]
oai:arXiv.org:1611.10362 [pdf] - 1532922
Upper limits for Mass and Radius of objects around Proxima Cen from
SPHERE/VLT
Mesa, D.;
Zurlo, A.;
Milli, J.;
Gratton, R.;
Desidera, S.;
Langlois, M.;
Vigan, A.;
Bonavita, M.;
Antichi, J.;
Avenhaus, H.;
Baruffolo, A.;
Biller, B.;
Boccaletti, A.;
Bruno, P.;
Cascone, E.;
Chauvin, G.;
Claudi, R. U.;
De Caprio, V.;
Fantinel, D.;
Farisato, G.;
Girard, J.;
Giro, E.;
Hagelberg, J.;
Incorvaia, S.;
Janson, M.;
Kral, Q.;
Lagadec, E.;
Lagrange, A. -M.;
Lessio, L.;
Meyer, M.;
Peretti, S.;
Perrot, C.;
Salasnich, B.;
Schlieder, J.;
Schmid, H. -M.;
Scuderi, S.;
Sissa, E.;
Thalmann, C.;
Turatto, M.
Submitted: 2016-11-30
The recent discovery of an earth-like planet around Proxima Centauri has
drawn much attention to this star and its environment. We performed a series of
observations of Proxima Centauri using SPHERE, the planet finder instrument
installed at the ESO Very Large Telescope UT3, using its near infrared modules,
IRDIS and IFS. No planet was directly detected but we set upper limits on the
mass up to 7 au exploiting the AMES-COND models. Our IFS observations reveal
that no planet more massive than ~6-7 M Jup can be present within 1 au. The
dual band imaging camera IRDIS also enables us to probe larger separations than
the other techniques like the radial velocity or astrometry. We obtained mass
limits of the order of 4 M Jup at separations of 2 au or larger representing
the most stringent mass limits at separations larger than 5 au available at the
moment. We also did an attempt to estimate the radius of possible planets
around Proxima using the reflected light. Since the residual noise for this
observations are dominated by photon noise and thermal background, longer
exposures in good observing conditions could further improve the achievable
contrast limit.
[13]
oai:arXiv.org:1609.01134 [pdf] - 1474446
Intensity Interferometry with Aqueye+ and Iqueye in Asiago
Submitted: 2016-09-05
Since a number of years our group is engaged in the design, construction and
operation of instruments with very high time resolution in the optical band for
applications to Quantum Astronomy and more conventional Astrophysics. Two
instruments were built to perform photon counting with sub-nanosecond temporal
accuracy. The first of the two, Aqueye+, is regularly mounted at the 1.8 m
Copernicus telescope in Asiago, while the second one, Iqueye, was mounted at
the ESO New Technology Telescope in Chile, and at the William Herschel
Telescope and Telescopio Nazionale Galileo on the Roque (La Palma, Canary
Islands). Both instruments deliver extraordinarily accurate results in optical
pulsar timing. Recently, Iqueye was moved to Asiago to be mounted at the 1.2 m
Galileo telescope to attempt, for the first time ever, experiments of optical
intensity interferometry (a` la Hanbury Brown and Twiss) on a baseline of a few
kilometers, together with the Copernicus telescope. This application was one of
the original goals for the development of our instrumentation. To carry out
these measurements, we are experimenting a new way of coupling the instruments
to the telescopes, by means of moderate-aperture, low-optical-attenuation
multi-mode optical fibers with a double-clad design. Fibers are housed in
dedicated optical interfaces attached to the focus of another instrument of the
1.8 m telescope (Aqueye+) or to the Nasmyth focus of the 1.2 m telescope
(Iqueye). This soft-mount solution has the advantage to facilitate the mounting
of the photon counters, to keep them under controlled temperature and humidity
conditions (reducing potential systematics related to varying ambient
conditions), and to mitigate scheduling requirements. Here we will describe the
first successful implementation of the Asiago intensity interferometer and
future plans for improving it.
[14]
oai:arXiv.org:1504.02962 [pdf] - 1337367
A facility to evaluate the focusing performance of mirrors for Cherenkov
Telescopes
Submitted: 2015-04-12, last modified: 2016-01-08
Cherenkov Telescopes are equipped with optical dishes of large diameter -- in
general based on segmented mirrors -- with typical angular resolution of a few
arc-minutes. To evaluate the mirror's quality specific metrological systems are
required that possibly take into account the environmental conditions in which
typically these telescopes operate (in open air without dome protection). For
this purpose a new facility for the characterization of mirrors has been
developed at the labs of the Osservatorio Astronomico di Brera of the Italian
National Institute of Astrophysics. The facility allows the precise measurement
of the radius of curvature and the distribution of the concentred light in
terms of focused and scattered components and it works in open air. In this
paper we describe the facility and report some examples of its measuring
capabilities.
[16]
oai:arXiv.org:1509.01044 [pdf] - 1938097
First results of the two square meters multilayer glass composite mirror
design proposed for the Cherenkov Telescope Array developed at INFN
Submitted: 2015-09-03
The Cherenkov Telescope Array (CTA) is a future ground-based gamma-ray
astronomy detector that will consist of more than 100 Imaging Atmospheric
Cherenkov Telescopes of different sizes. The total reflective surface of
roughly 10 000 m$^2$ requires unprecedented technological efforts towards a
cost-efficient production of light-weight and reliable mirror substrates at
high production rate. We report on a new mirror concept proposed for CTA
developed by INFN, which is based on the replication from a spherical convex
mold under low pressure. The mirror substrate is an open structure design made
by thin glass layers at the mirror's front and rear interspaced by steel
cylinders. A first series of nominal size mirrors has been produced, for which
we discuss the optical properties in terms of radius of curvature and focusing
power.
[17]
oai:arXiv.org:1310.1713 [pdf] - 728971
Status of the technologies for the production of the Cherenkov Telescope
Array (CTA) mirrors
Pareschi, G.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
de Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Förster, A.;
Garczarczyk, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
Mandat, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-10-07
The Cherenkov Telescope Array (CTA) is the next generation very high-energy
gamma-ray observatory, with at least 10 times higher sensitivity than current
instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov
Telescopes (IACTs) operated in array-mode and divided into three size classes:
large, medium and small telescopes. The total reflective surface could be up to
10,000 m2 requiring unprecedented technological efforts. The properties of the
reflector directly influence the telescope performance and thus constitute a
fundamental ingredient to improve and maintain the sensitivity. The R&D status
of lightweight, reliable and cost-effective mirror facets for the CTA telescope
reflectors for the different classes of telescopes is reviewed in this paper.
[19]
oai:arXiv.org:1307.5671 [pdf] - 696181
The ASTRI Mini-Array Science Case
Vercellone, S.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Misto', A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Zitelli, V.;
Tavecchio, F.
Submitted: 2013-07-22
ASTRI is a Flagship Project financed by the Italian Ministry of Education,
University and Research, and led by INAF, the Italian National Institute of
Astrophysics. Within this framework, INAF is currently developing an end-to-end
prototype of a Small Size Telescope in a dual-mirror configuration (SST-2M) for
the Cherenkov Telescope Array (CTA), scheduled to start data acquisition in
2014. Although the ASTRI SST-2M prototype is mainly a technological
demonstrator, it will perform scientific observations of the Crab Nebula, Mrk
421 and Mrk 501 at E>1 TeV. A remarkable improvement in terms of performance
could come from the operation, in 2016, of a SST-2M mini-array, composed of a
few SST-2M telescopes to be placed at final CTA Southern Site. The SST
mini-array will be able to study in great detail relatively bright sources (a
few x 10E-12 erg/cm2/s at 10 TeV) with angular resolution of a few arcmin and
energy resolution of about 10-15%. Thanks to the stereo approach, it will be
possible to verify the wide field of view (FoV) performance through the
detections of very high-energy showers with core located at a distance up to
500 m, to compare the mini-array performance with the Monte Carlo expectations
by means of deep observations of selected targets, and to perform the first CTA
science at the beginning of the mini-array operations. Prominent sources such
as extreme blazars, nearby well-known BL Lac objects and radio-galaxies,
galactic pulsar wind nebulae, supernovae remnants, micro-quasars, and the
Galactic Center can be observed in a previously unexplored energy range, in
order to investigate the electron acceleration and cooling, relativistic and
non relativistic shocks, the search for cosmic-ray (CR) Pevatrons, the study of
the CR propagation, and the impact of the extragalactic background light on the
spectra of the sources.
[20]
oai:arXiv.org:1307.5006 [pdf] - 695205
Expected performance of the ASTRI-SST-2M telescope prototype
Bigongiari, C.;
Di Pierro, F.;
Morello, C.;
Stamerra, A.;
Vallania, P.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vercellone, S.;
Zitelli, V.;
Arrabito, L.;
Bernlohr, K.;
Maier, G.;
Komin, N.;
Consortium, The Cta
Submitted: 2013-07-18
ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is an
Italian flagship project pursued by INAF (Istituto Nazionale di Astrofisica)
strictly linked to the development of the Cherenkov Telescope Array, CTA.
Primary goal of the ASTRI program is the design and production of an end-to-end
prototype of a Small Size Telescope for the CTA sub-array devoted to the
highest gamma-ray energy region. The prototype, named ASTRI SST-2M, will be
tested on field in Italy during 2014. This telescope will be the first
Cherenkov telescope adopting the double reflection layout in a
Schwarzschild-Couder configuration with a tessellated primary mirror and a
monolithic secondary mirror. The collected light will be focused on a compact
and light-weight camera based on silicon photo-multipliers covering a 9.6 deg
full field of view. Detailed Monte Carlo simulations have been performed to
estimate the performance of the planned telescope. The results regarding its
energy threshold, sensitivity and angular resolution are shown and discussed.
[21]
oai:arXiv.org:1307.4962 [pdf] - 1943149
The dual-mirror Small Size Telescope for the Cherenkov Telescope Array
Pareschi, G.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.;
Amans, J. P.;
Boisson, C.;
Costille, C.;
Dournaux, J. L.;
Dumas, D.;
Fasola, G.;
Hervet, O.;
Huet, J. M.;
Laporte, P.;
Rulten, C.;
Sol, H.;
Zech, A.;
White, R.;
Hinton, J.;
Ross, D.;
Sykes, J.;
Ohm, S.;
Schmoll, J.;
Chadwick, P.;
Greenshaw, T.;
Daniel, M.;
Cotter, G.;
Varner, G. S.;
Funk, S.;
Vandenbroucke, J.;
Sapozhnikov, L.;
Buckley, J.;
Moore, P.;
Williams, D.;
Markoff, S.;
Vink, J.;
Berge, D.;
Hidaka, N.;
Okumura, A.;
Tajima, H.
Submitted: 2013-07-18
In this paper, the development of the dual mirror Small Size Telescopes (SST)
for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a
primary mirror diameter of 4 m, will be produced and installed at the CTA
southern site. These will allow investigation of the gamma-ray sky at the
highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV.
The telescope presented in this contribution is characterized by two major
innovations: the use of a dual mirror Schwarzschild-Couder configuration and of
an innovative camera using as sensors either multi-anode photomultipliers
(MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the
telescope, achieved with the dual-mirror optics, allows the camera to be
compact (40 cm in diameter), and low-cost. The camera, which has about 2000
pixels of size 6x6 mm^2, covers a field of view of 10{\deg}. The dual mirror
telescopes and their cameras are being developed by three consortia, ASTRI
(Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE
(Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High
Energy Camera, universities in UK, US and Japan) which are merging their
efforts in order to finalize an end-to-end design that will be constructed for
CTA. A number of prototype structures and cameras are being developed in order
to investigate various alternative designs. In this contribution, these designs
are presented, along with the technological solutions under study.
[22]
oai:arXiv.org:1307.4563 [pdf] - 1943147
Mirror Development for the Cherenkov Telescope Array
Förster, A.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
De Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
MANDAT, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pareschi, G.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
Van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-07-17
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high
energy gamma-ray astronomy. It will consist of several tens of telescopes of
different sizes, with a total mirror area of up to 10,000 square meters. Most
mirrors of current installations are either polished glass mirrors or
diamond-turned aluminium mirrors, both labour intensive technologies. For CTA,
several new technologies for a fast and cost-efficient production of
light-weight and reliable mirror substrates have been developed and industrial
pre-production has started for most of them. In addition, new or improved
aluminium-based and dielectric surface coatings have been developed to increase
the reflectance over the lifetime of the mirrors compared to those of current
Cherenkov telescope instruments.
[23]
oai:arXiv.org:1307.3992 [pdf] - 692792
Towards the ASTRI mini-array
Di Pierro, F.;
Bigongiari, C.;
Morello, C.;
Stamerra, A.;
Vallania, P.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Misto, A.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vercellone, S.;
Zitelli, V.;
Consortium, The Cta
Submitted: 2013-07-15
The Cherenkov Telescope Array (CTA) will consist of an array of three types
of telescopes covering a wide energy range, from tens of GeV up to more than
100 TeV. The high energy section (> 3 TeV) will be covered by the Small Size
Telescopes (SST). ASTRI (Astrofisica con Specchi a Tecnologia Replicante
Italiana) is a flagship project of the Italian Ministry of Research and
Education led by INAF, aiming at the design and construction of a prototype of
the Dual Mirror SST. In a second phase the ASTRI project foresees the
installation of the first elements of the SST array at the CTA southern site, a
mini-array of 5-7 telescopes. The optimization of the layout of this mini-array
embedded in the SST array of the CTA Observatory has been the object of an
intense simulation effort. In this work we present the expected mini-array
performance in terms of energy threshold, angular and energy resolution and
sensitivity.
[24]
oai:arXiv.org:1304.6559 [pdf] - 664149
The ASTRI Project: a mini-array of dual-mirror small Cherenkov
telescopes for CTA
La Palombara, N.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Mistó, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.
Submitted: 2013-04-24, last modified: 2013-05-15
ASTRI is a flagship project of the Italian Ministry of Education, University
and Research, which aims to develop an end-to-end prototype of the CTA
small-size telescope. The proposed design is characterized by a dual-mirror
Schwarzschild-Couder configuration and a camera based on Silicon
photo-multipliers, two challenging but innovative technological solutions which
will be adopted for the first time on a Cherenkov telescope. Here we describe
the current status of the project, the expected performance and the possibility
to realize a mini-array composed by a few small-size telescopes, which shall be
placed at the final CTA Southern Site.
