An analytical model for fully developed three-dimensional incompressible turbulence was recently proposed in the hydrodynamics community, based on the concept of multiplicative chaos. It consists of a random field represented by means of a stochastic integral, which, with only a few parameters, shares many properties with experimental and numerical turbulence, including in particular energy transfer through scales (the cascade) and intermittency (non-Gaussianity) which is most conveniently controlled with a single parameter. Here, we propose three models extending this approach to MHD turbulence. Our formulae provide physically motivated 3D models of a turbulent velocity field and magnetic field coupled together. Besides its theoretical value, this work is meant to provide a tool for observers: a dozen of physically meaningful free parameters enter the description, which is useful to characterize astrophysical data.

Radio observations of Asymptotic Giant Branch (AGB) star envelopes frequently show some excess emission at frequencies below 100 GHz which cannot be explained by thermal dust emission (hereafter anomalous microwave emission-AME). Moreover, AGB envelopes are a common place where gas molecules condense to form nanoparticles (e.g., polycyclic aromatic hydrocarbons) and large grains. In this paper, we will study whether electric dipole emission from rapidly spinning nanoparticles can reproduce the AME observed toward AGB stars. To properly model the size distribution of nanoparticles in the AGB envelope, we take into account both the increase of nanoparticles due to rotational disruption of large grains spun-up by radiative torques and the decrease of smallest nanoparticles due to rotational disruption driven by stochastic gas collisions. We then perform detailed modeling of microwave emission from rapidly spinning nanoparticles from both C-rich and O-rich AGB envelopes using the grain size distribution constrained by rotational disruption. We find that spinning dust emission is dominant over thermal dust emission at frequencies below 100 GHz. We attempt to fit the observational data of AME using our spinning dust model and demonstrate that spinning dust can reproduce the observed AME in six AGB stars. Finally, we discuss that microwave emission from spinning dust in AGB envelopes could be observed with high-resolution upcoming radio telescopes such as ngVLA and ALMA Band 1. This would be a major leap for understanding AGB envelopes, formation, evolution, and internal structures of dust. Observations would help to distinguish the carrier of AME from comparing C-rich to O-rich stars, because PAHs are formed in C-rich AGB stars while silicates are formed in O-rich stars.

With an aim of probing the physical conditions and excitation mechanisms of warm molecular gas in individual star-forming regions, we performed Herschel SPIRE FTS observations of 30 Doradus in the LMC. In our FTS observations, important FIR cooling lines in the ISM, including CO J=4-3 to 13-12, [CI] 370 micron, and [NII] 205 micron, were clearly detected. In combination with ground-based CO data, we then constructed CO spectral line energy distributions (SLEDs) on 10 pc scales over a 60 pc x 60 pc area and found that the shape of the observed CO SLEDs considerably changes across 30 Doradus, e.g., the peak transition varies from J=6-5 to 10-9, while the slope characterized by the high-to-intermediate J ratio ranges from 0.4 to 1.8. To examine the source(s) of these variations in CO transitions, we analyzed the CO observations, along with [CII] 158 micron, [CI] 370 micron, [OI] 145 micron, H2 0-0 S(3), and FIR luminosity data, using state-of-the-art models of PDRs and shocks. Our detailed modeling showed that the observed CO emission likely originates from highly-compressed (thermal pressure ~ 1e7-1e9 K cm-3) clumps on 0.7-2 pc scales, which could be produced by either UV photons (UV radiation field ~ 1e3-1e5 Mathis fields) or low-velocity C-type shocks (pre-shock medium density ~ 1e4-1e6 cm-3 and shock velocity ~ 5-10 km s-1). Considering the stellar content in 30 Doradus, however, we tentatively excluded the stellar origin of CO excitation and concluded that low-velocity shocks driven by kpc scale processes (e.g., interaction between the Milky Way and the Magellanic Clouds) are likely the dominant source of heating for CO. The shocked CO-bright medium was then found to be warm (temperature ~ 100-500 K) and surrounded by a UV-regulated low pressure component (a few (1e4-1e5) K cm-3) that is bright in [CII] 158 micron, [CI] 370 micron, [OI] 145 micron, and FIR dust continuum emission.

Spectrally-resolved observations of three pure rotational lines of H$_2$, conducted with the EXES instrument on SOFIA toward the classic bow shock HH7, reveal systematic velocity shifts between the S(5) line of ortho-H$_2$ and the two para-H$_2$ lines [S(4) and S(6)] lying immediately above and below it on the rotational ladder. These shifts, reported here for the first time, imply that we are witnessing the conversion of para-H$_2$ to ortho-H$_2$ within a shock wave driven by an outflow from a young stellar object. The observations are in good agreement with the predictions of models for non-dissociative, C-type molecular shocks. They provide a clear demonstration of the chemical changes wrought by interstellar shock waves, in this case the conversion of para-H$_2$ to ortho-H$_2$ in reactive collisions with atomic hydrogen, and provide among the most compelling evidence yet obtained for C-type shocks in which the flow velocity changes continuously.

SPICA, the cryogenic infrared space telescope recently pre-selected for a `Phase A' concept study as one of the three remaining candidates for ESA's fifth medium class (M5) mission, is foreseen to include a far-infrared polarimetric imager (SPICA-POL, now called B-BOP), which would offer a unique opportunity to resolve major issues in our understanding of the nearby, cold magnetized Universe. This paper presents an overview of the main science drivers for B-BOP, including high dynamic range polarimetric imaging of the cold interstellar medium (ISM) in both our Milky Way and nearby galaxies. Thanks to a cooled telescope, B-BOP will deliver wide-field 100-350 micron images of linearly polarized dust emission in Stokes Q and U with a resolution, signal-to-noise ratio, and both intensity and spatial dynamic ranges comparable to those achieved by Herschel images of the cold ISM in total intensity (Stokes I). The B-BOP 200 micron images will also have a factor ~30 higher resolution than Planck polarization data. This will make B-BOP a unique tool for characterizing the statistical properties of the magnetized interstellar medium and probing the role of magnetic fields in the formation and evolution of the interstellar web of dusty molecular filaments giving birth to most stars in our Galaxy. B-BOP will also be a powerful instrument for studying the magnetism of nearby galaxies and testing galactic dynamo models, constraining the physics of dust grain alignment, informing the problem of the interaction of cosmic rays with molecular clouds, tracing magnetic fields in the inner layers of protoplanetary disks, and monitoring accretion bursts in embedded protostars.

Aims. The goal of the paper is to present a detailed study of the propagation of low velocity (5 to 25 km s-1) stationary molecular shocks in environments illuminated by an external ultraviolet (UV) radiation field. In particular, we intend to show how the structure, dynamics, energetics, and chemical properties of shocks are modified by UV photons and to estimate how efficiently shocks can produce line emission. Methods. We implemented several key physico-chemical processes in the Paris-Durham shock code to improve the treatment of the radiative transfer and its impact on dust and gas particles. We propose a new integration algorithm to find the steady-state solutions of magnetohydrodynamics equations in a range of parameters in which the fluid evolves from a supersonic to a subsonic regime. We explored the resulting code over a wide range of physical conditions, which encompass diffuse interstellar clouds and hot and dense photon-dominated regions (PDR). Results. We find that C-type shock conditions cease to exist as soon as G0 > 0.2 (nH/cm-3)^1/2. Such conditions trigger the emergence of another category of stationary solutions, called C*-type and CJ-type shocks, in which the shocked gas is momentarily subsonic along its trajectory. These solutions are shown to be unique for a given set of physical conditions and correspond to dissipative structures in which the gas is heated up to temperatures comprised between those found in C-type and adiabatic J-type shocks. High temperatures combined with the ambient UV field favour the production or excitation of a few molecular species to the detriment of others, hence leading to specific spectroscopic tracers such as rovibrational lines of H2 and rotational lines of CH+. Unexpectedly, the rotational lines of CH+ may carry as much as several percent of the shock kinetic energy.

We present an approach to turbulence closure based on mixing length theory with three-dimensional fluctuations against a two-dimensional background. This model is intended to be rapidly computable for implementation in stellar evolution software and to capture a wide range of relevant phenomena with just a single free parameter, namely the mixing length. We incorporate magnetic, rotational, baroclinic and buoyancy effects exactly within the formalism of linear growth theories with nonlinear decay. We treat differential rotation effects perturbatively in the corotating frame using a novel controlled approximation which matches the time evolution of the reference frame to arbitrary order. We then implement this model in an efficient open source code and discuss the resulting turbulent stresses and transport coefficients. We demonstrate that this model exhibits convective, baroclinic and shear instabilities as well as the magnetorotational instability (MRI). It also exhibits non-linear saturation behaviour, and we use this to extract the asymptotic scaling of various transport coefficients in physically interesting limits.

Stars are bad neighbors: they often disturb their surroundings. They sometimes travel very fast through the interstellar medium (ISM). They frequently undergo violent ejection events which leave an imprint on their neighborhood (jets, winds, supernovae). These supersonic flows generate shocks both in the ejected material (bow shock) and in the stellar environment (termination shock). The global purpose of this thesis is to link the properties of stars and the ISM by studying these shocks. We model them with the Paris-Durham planar shock code, which incorporates a wealth of micro-physics and chemical processes relevant to the magnetized ISM. In the first part, we model 3D magnetized axis-symmetric bow shock by a statistical distribution of 1D planar shocks computed with the Paris-Durham model. For the first time, we examine systematically the effect of the geometry, age, and various other parameters on the H2 excitation diagram and emission line profiles. Then, we will show that this 3D bow shock model unprecedentedly improves interpretations of the H2 observations inOrion BN-KL and BHR71, and show how spectral resolved H2 line emission profiles on the Herbig-Haro objects HH54 can be used to extract a wealth of dynamical information. In the second part, we model 1D steady stellar winds from AGB stars, which trigger the termination shock, by including relevant physical and chemical ingredients in the Paris-Durham code. For the first time, we examine the time-dependent conversion of atomic to molecular hydrogen along the wind trajectories of "hot" and "cold" AGB stars. We suggest that the low abundance of HI inferred from observations is due to hydrogen locked in its molecular form. Then, we try to reproduce HI 21-cm line profile in a "hot" AGB (called Y CVn) and a "cold" AGB (called CW Leo).

When a fast moving star or a protostellar jet hits an interstellar cloud, the surrounding gas gets heated and illuminated: a bow shock is born which delineates the wake of the impact. In such a process, the new molecules that are formed and excited in the gas phase become accessible to observations. In this article, we revisit models of H2 emission in these bow shocks. We approximate the bow shock by a statistical distribution of planar shocks computed with a magnetized shock model. We improve on previous works by considering arbitrary bow shapes, a finite irradiation field, and by including the age effect of non-stationary C-type shocks on the excitation diagram and line profiles of H2. We also examine the dependence of the line profiles on the shock velocity and on the viewing angle: we suggest that spectrally resolved observations may greatly help to probe the dynamics inside the bow shock. For reasonable bow shapes, our analysis shows that low velocity shocks largely contribute to H2 excitation diagram. This can result in an observational bias towards low velocities when planar shocks are used to interpret H2 emission from an unresolved bow. We also report a large magnetization bias when the velocity of the planar model is set independently. Our 3D models reproduce excitation diagrams in BHR71 and Orion bow shocks better than previous 1D models. Our 3D model is also able to reproduce the shape and width of the broad H2 1-0S(1) line profile in an Orion bow shock.

Molecular clouds are essentially made up of atomic and molecular hydrogen, which in spite of being the simplest molecule in the ISM plays a key role in the chemical evolution of molecular clouds. Since its formation time is very long, the H2 molecules can be transported by the turbulent motions within the cloud toward low density and warm regions, where its enhanced abundance can boost the abundances of molecules with high endothermicities. We present high resolution simulations where we include the evolution of the molecular gas under the effect of the dynamics, and we analyze its impact on the abundance of CH+.

We estimate the extent of overshooting inwards from the bottom of the intershell convective zone in thermal pulses in (S)AGB stars. We find that the buoyancy is so strong that any overshooting should be negligible. The temperature inversion at the bottom of the convective zone adds to the stability of the region. Any mixing that occurs in this region is highly unlikely to be due to convective overshooting, and so must be due to another process.

Protostellar jets and outflows are key features of the star-formation process, and primary processes of the feedback of young stars on the interstellar medium. Understanding the underlying shocks is necessary to explain how jets and outflows are launched, and to quantify their chemical and energetic impacts on the surrounding medium. We performed a high-spectral resolution study of the [OI]$_{\rm 63 \mu m}$ emission in the outflow of the intermediate-mass Class 0 protostar Cep E-mm. We present observations of the OI $^3$P$_1 \rightarrow$ $^3$P$_2$, OH between $^2\Pi_{1/2}$ $J = 3/2$ and $J = 1/2$ at 1837.8 GHz, and CO (16-15) lines with SOFIA-GREAT at three positions in the Cep E outflow: mm (the driving protostar), BI (in the southern lobe), and BII (the terminal position in the southern lobe). The CO line is detected at all three positions. The OI line is detected in BI and BII, whereas the OH line is not detected. In BII, we identify three kinematical components in OI and CO, already detected in CO: the jet, the HH377 terminal bow-shock, and the outflow cavity. The OI column density is higher in the outflow cavity than in the jet, which itself is higher than in the terminal shock. The terminal shock is where the abundance ratio of OI to CO is the lowest (about 0.2), whereas the jet component is atomic (ratio $\sim$2.7). In the jet, we compare the OI observations with shock models that successfully fit the integrated intensity of 10 CO lines: these models do not fit the OI data. The high intensity of OI emission points towards the propagation of additional dissociative or alternative FUV-irradiated shocks, where the illumination comes from the shock itself. From the sample of low-to-high mass protostellar outflows where similar observations have been performed, the effects of illumination seem to increase with the mass of the protostar.

The grand question of star and planet formation is the distribution of magnetic flux in the protoplanetary disks. To answer it, a detailed self-consistent chemical evolution is needed to describe the magnetic dissipation in the collapsing core accurately. We use a chemo-dynamical version of RAMSES to follow the evolution of collapsing dense cores for a range in the dust size assumptions. The number density of dust and it's mean size are affecting the efficiency of the charge capturing and thus the chemistry. The chemical abundances for the range of dust sizes are produced by RAMSES and serve as an input to calculations of Ohmic, ambipolar and Hall diffusivity terms. We find that Ohmic resistivity only plays a role at the late stage of the collapse where gas density exceeds few times $10^{13}\rm cm^{-3}$. Ambipolar diffusion is a dominant magnetic diffusivity term in cases where mean dust size is a typical ISM value or larger. We show that the assumption of a fixed 'dominant ion' mass can change the ambipolar diffusion up to one order of magnitude. 'Negative' Hall effect is dominant during the collapse in case of mean dust size of 0.02 $\mu$m and smaller, the effect which we connect to the dominance of negatively charged grains. We find that the Hall effect's sign reversal is depending on relative contribution of negatively charged dust to the hall conductivity. The dust grain mean size appears to be the parameter dividing the collapsing clouds in Hall-dominated and ambipolar-dominated clouds, and thus affecting the size of the new-born disks. We propose to link the dust properties and the occurance and size of disk structures in Class 0 YSO's. The proper accounting for dust grain growth in the radiative magneto-hydrodynamical collapse models appear to be be as important as coupling the dynamics of the collapse with the chemistry.

This paper assesses the roles of the presence of warm H2, and the increased formation rate due to the ion-neutral drift. We performed ideal MHD simulations that include the heating and cooling of the multiphase ISM, and where we treat dynamically the formation of H2. In a post-processing step we compute the abundances of species at chemical equilibrium. We show that CH+ is efficiently formed at the edge of clumps, in regions where the H2 fraction is low, but nevertheless higher than its equilibrium value, and where the gas temperature is high. We show that warm and out of equilibrium H2 increases the integrated column densities of CH+ by one order of magnitude, up to values still 3-10 times lower than those observed in the diffuse ISM. We balance the Lorentz force with the ion-neutral drag to estimate the ion-drift velocities (vd). We find that the vd distribution peaks around 0.04 km s-1, and that high vd are too rare to have a significant statistical impact on the abundances of CH+. Compared to previous works, our multiphase simulations reduce the spread in vd, and our self-consistent treatment of the ionisation leads to much reduced vd. Nevertheless, our resolution study shows that this velocity distribution is not converged: the ion-neutral drift has a higher impact on CH+ at higher resolution. On the other hand, our ideal MHD simulations do not include ambipolar diffusion, which would yield lower drift velocities. Within these limitations, we conclude that warm H2 is a key ingredient in the efficient formation of CH+ and that the ambipolar diffusion has very little influence on the abundance of CH+, mainly due to the small drift velocities obtained. However, we point out that small-scale processes and other non-thermal processes not included in our MHD simulation may be of crucial importance, and higher resolution studies with better controlled dissipation processes are needed.

Previous literature suggests that the densest structures in the interstellar medium form through colliding flows, but patent evidence of this process is still missing. Recent literature proposes using SiO line emission to trace low-velocity shocks associated with cloud formation through collision. In this paper we investigate the bright and extended SiO(2-1) emission observed along the ~5 pc-long W43-MM1 ridge to determine its origin. We used high angular resolution images of the SiO(2-1) and HCN(1-0) emission lines obtained with the IRAM plateau de Bure (PdBI) interferometer and combined with data from the IRAM 30 m radiotelescope. These data were complemented by a Herschel column density map of the region. We performed spectral analysis of SiO and HCN emission line profiles to identify protostellar outflows and spatially disentangle two velocity components associated with low- and high-velocity shocks. Then, we compared the low-velocity shock component to a dedicated grid of one-dimensional (1D) radiative shock models. We find that the SiO emission originates from a mixture of high-velocity shocks caused by bipolar outflows and low-velocity shocks. Using SiO and HCN emission lines, we extract seven bipolar outflows associated with massive dense cores previously identified within the W43-MM1 mini-starburst cluster. Comparing observations with dedicated Paris-Durham shock models constrains the velocity of the low-velocity shock component from 7 to 12km/s. The SiO arising from low-velocity shocks spreads along the complete length of the ridge. Its contribution represents at least 45% and up to 100% of the total SiO emission depending on the area considered. The low-velocity component of SiO is most likely associated with the ridge formation through colliding flows or cloud-cloud collision.

We present Herschel SPIRE Fourier Transform Spectrometer (FTS) observations of N159W, an active star-forming region in the Large Magellanic Cloud (LMC). In our observations, a number of far-infrared cooling lines including CO(4-3) to CO(12-11), [CI] 609 and 370 micron, and [NII] 205 micron are clearly detected. With an aim of investigating the physical conditions and excitation processes of molecular gas, we first construct CO spectral line energy distributions (SLEDs) on 10 pc scales by combining the FTS CO transitions with ground-based low-J CO data and analyze the observed CO SLEDs using non-LTE radiative transfer models. We find that the CO-traced molecular gas in N159W is warm (kinetic temperature of 153-754 K) and moderately dense (H2 number density of (1.1-4.5)e3 cm-3). To assess the impact of the energetic processes in the interstellar medium on the physical conditions of the CO-emitting gas, we then compare the observed CO line intensities with the models of photodissociation regions (PDRs) and shocks. We first constrain the properties of PDRs by modelling Herschel observations of [OI] 145, [CII] 158, and [CI] 370 micron fine-structure lines and find that the constrained PDR components emit very weak CO emission. X-rays and cosmic-rays are also found to provide a negligible contribution to the CO emission, essentially ruling out ionizing sources (ultraviolet photons, X-rays, and cosmic-rays) as the dominant heating source for CO in N159W. On the other hand, mechanical heating by low-velocity C-type shocks with ~10 km/s appears sufficient enough to reproduce the observed warm CO.

Combining the co-evolving chemistry, hydrodynamics and radiative transfer is an important step for star formation studies. It allows both a better link to observations and a self-consistent monitoring of the magnetic dissipation in the collapsing core. Our aim is to follow a chemo-dynamical evolution of collapsing dense cores with a reduced gas-grain chemical network. We present the results of radiative hydrodynamic (RHD) simulations of 1 M$_\odot$ isolated dense core collapse. The physical setup includes RHD and dynamical evolution of a chemical network. To perform those simulations, we merged the multi-dimensional adaptive-mesh-refinement code RAMSES and the thermo-chemistry Paris-Durham shock code. We simulate the formation of the first hydro-static core (FHSC) and the co-evolution of 56 species describing mainly H-C-O chemistry. Accurate benchmarking is performed, testing the reduced chemical network against a well-establiched complex network. We show that by using a compact set of reactions, one can match closely the CO abundances with results of a much more complex network. Our main results are: (a) We find that gas-grain chemistry post-processing can lead to one order of magnitude lower CO gas-phase abundances compared to the dynamical chemistry, with strongest effect during the isothermal phase of collapse. (b) The free-fall time has little effect on the chemical abundances for our choice of the parameters. (c) Dynamical chemical evolution is required to describe the CO gas phase abundance as well as the CO ice formation for the mean grain size larger then 1$\mu{}$m. (d) Furthermore, dust mean size and size distribution have a strong effect on chemical abundances and hence on the ionization degree and magnetic dissipation. We conclude that dust grain growth in the collapse simulations can be as important as coupling the collapse with chemistry.

H2 is the simplest and the most abundant molecule in the ISM, and its formation precedes the formation of other molecules. Understanding the dynamical influence of the environment and the interplay between the thermal processes related to the formation and destruction of H2 and the structure of the cloud is mandatory to understand correctly the observations of H2. We perform high resolution MHD colliding flow simulations with the AMR code RAMSES in which the physics of H2 has been included. We compare the simulation results with various observations including the column densities of excited rotational levels. Due to a combination of thermal pressure, ram pressure and gravity, the clouds produced at the converging point of HI streams are highly inhomogeneous. H2 molecules quickly form in relatively dense clumps and spread into the diffuse interclump gas. This in particular leads to the existence of significant abundances of H2 in the diffuse and warm gas that lies in between clumps. Simulations and observations show similar trends, specially for the HI-to-H2 transition. The abundances of excited rotational levels, calculated at equilibrium in the simulations are very similar to the observed abundances inferred from FUSE results. This is a direct consequence of the presence of the H2 enriched diffuse and warm gas. Our simulations show that H2 rapidly forms in the dense clumps and, due to the complex structure of molecular clouds, quickly spreads at lower densities. Consequently a significant fraction of warm H2 exists in the low density gas. This warm H2 leads to column densities of excited rotational levels close to the observed ones likely revealing the complex intermix between the warm and the cold gas in molecular clouds. This suggests that the 2-phase structure of molecular clouds is an essential ingredient to fully understand molecular hydrogen in these objects.

We performed high-resolution, 3D MHD simulations and we compared to observations of translucent molecular clouds. We show that the observed populations of rotational levels of H2 can arise as a consequence of the multi-phase structure of the ISM.

We have observed five sulphur-bearing molecules in foreground diffuse molecular clouds lying along the sight-lines to five bright continuum sources. We have used the GREAT instrument on SOFIA to observe the 1383 GHz $^2\Pi_{3/2} J=5/2-3/2$ transitions of SH towards the star-forming regions W31C, G29.96-0.02, G34.3+0.1, W49N and W51, detecting foreground absorption towards all five sources; and the EMIR receivers on the IRAM 30m telescope at Pico Veleta to detect the H$_2$S 1(10)-1(01), CS J=2-1 and SO 3(2)-2(1) transitions. In nine foreground absorption components detected towards these sources, the inferred column densities of the four detected molecules showed relatively constant ratios, with N(SH)/N(H$_2$S) in the range 1.1 - 3.0, N(CS)/N(H$_2$S) in the range 0.32 - 0.61, and N(SO)/N(H$_2$S) in the range 0.08 - 0.30. The observed SH/H$_2$ ratios - in the range (0.5-2.6) $\times 10^{-8}$ - indicate that SH (and other sulphur-bearing molecules) account for << 1% of the gas-phase sulphur nuclei. The observed abundances of sulphur-bearing molecules, however, greatly exceed those predicted by standard models of cold diffuse molecular clouds, providing further evidence for the enhancement of endothermic reaction rates by elevated temperatures or ion-neutral drift. We have considered the observed abundance ratios in the context of shock and turbulent dissipation region (TDR) models. Using the TDR model, we find that the turbulent energy available at large scale in the diffuse ISM is sufficient to explain the observed column densities of SH and CS. Standard shock and TDR models, however, fail to reproduce the column densities of H$_2$S and SO by a factor of about 10; more elaborate shock models - in which account is taken of the velocity drift, relative to H$_2$, of SH molecules produced by the dissociative recombination of H$_3$S$^+$ - reduce this discrepancy to a factor ~ 3.

The dissipation of kinetic and magnetic energy in the interstellar medium (ISM) can proceed through viscous, Ohmic or ambipolar diffusion (AD). It occurs at very small scales compared to the scales at which energy is presumed to be injected. This localized heating may impact the ISM evolution but also its chemistry, thus providing observable features. Here, we perform 3D spectral simulations of decaying magnetohydrodynamic turbulence including the effects of AD. We find that the AD heating power spectrum peaks at scales in the inertial range, due to a strong alignment of the magnetic and current vectors in the dissipative range. AD affects much greater scales than the AD scale predicted by dimensional analysis. We find that energy dissipation is highly concentrated on thin sheets. Its probability density function follows a lognormal law with a power-law tail which hints at intermittency, a property which we quantify by use of structure function exponents. Finally, we extract structures of high dissipation, defined as connected sets of points where the total dissipation is most intense and we measure the scaling exponents of their geometric and dynamical characteristics: the inclusion of AD favours small sizes in the dissipative range.

Some runaway stars are known to display IR arc-like structures around them, resulting from their interaction with surrounding interstellar material. The properties of these features as well as the processes involved in their formation are still poorly understood. We aim at understanding the physical mechanisms that shapes the dust arc observed near the runaway O star AEAur (HD34078). We obtained and analyzed a high spatial resolution map of the CO(1-0) emission that is centered on HD34078, and that combines data from both the IRAM interferometer and 30m single-dish antenna. The line of sight towards HD34078 intersects the outer part of one of the detected globulettes, which accounts for both the properties of diffuse UV light observed in the field and the numerous molecular absorption lines detected in HD34078's spectra, including those from highly excited H2 . Their modeled distance from the star is compatible with the fact that they lie on the 3D paraboloid which fits the arc detected in the 24 {\mu}m Spitzer image. Four other compact CO globulettes are detected in the mapped area. These globulettes have a high density and linewidth, and are strongly pressure-confined or transient. The good spatial correlation between the CO globulettes and the IR arc suggests that they result from the interaction of the radiation and wind emitted by HD 34078 with the ambient gas. However, the details of this interaction remain unclear. A wind mass loss rate significantly larger than the value inferred from UV lines is favored by the large IR arc size, but does not easily explain the low velocity of the CO globulettes. The effect of radiation pressure on dust grains also meets several issues in explaining the observations. Further observational and theoretical work is needed to fully elucidate the processes shaping the gas and dust in bow shocks around runaway O stars. (Abridged)

The formation of high-mass stars is tightly linked to that of their parental clouds. We here focus on the high-density parts of W43, a molecular cloud undergoing an efficient event of formation. The cloud structure is studied with a column density image derived from Herschel continuum maps obtained at 70, 160, 250, 350, and 500 micron. We identify two high-column density filamentary clouds, quoted as the W43-MM1 and W43-MM2 ridges, which both account for 1.5x10^4 Msun gas mass above 10^23 cm-2 and within areas of 5 and 14pc^2, respectively. We used the N_2H^+ 1--0 line to confirm that the W43-MM1 and W43-MM2 ridges are structures coherent in velocity and gravitationally bound, despite their large velocity dispersion and ~5 kms line widths. The most intriguing result of the W43 large program is the bright wide-spread SiO 2--1 emission: 1--11 K kms$ stretching an area of ~28 pc^2. Concentrated toward the W43-MM1 and W43-MM2 ridges and their immediate surroundings, it leads to a total luminosity of L_SiO 2-1 ~4 10^4 K kms kpc^2pc^2. We measured a steep relation between the luminosity and velocity extent of the SiO~2--1 lines and propose to use it to distinguish the low-velocity shocks observed here from the more classical high-velocity ones associated with outflows of high-mass young stellar objects. We used state-of-the-art shock models to demonstrate that low-velocity (<10 kms^-1) shocks with a small amount (10%) of Si atoms initially in gas phase or in grain mantles can explain the observed SiO column density in W43. The spatial and velocity overlaps between the ridges high-density gas (n_H2>10^4-10^5 cm^-3) and the shocked SiO gas suggests that ridges could be forming via colliding flows driven by gravity and accompanied by low-velocity shocks. This mechanism may be the initial conditions for the formation of young massive clusters in these ridges.

The helioseismic observations of the internal rotation profile of the Sun raise questions about the two-dimensional (2D) nature of the transport of angular momentum in stars. Here we derive a convective prescription for axisymmetric (2D) stellar evolution models. We describe the small scale motions by a spectrum of unstable linear modes in a Boussinesq fluid. Our saturation prescription makes use of the angular dependence of the linear dispersion relation to estimate the anisotropy of convective velocities. We are then able to provide closed form expressions for the thermal and angular momentum fluxes with only one free parameter, the mixing length. We illustrate our prescription for slow rotation, to first order in the rotation rate. In this limit, the thermodynamical variables are spherically symetric, while the angular momentum depends both on radius and latitude. We obtain a closed set of equations for stellar evolution, with a self-consistent description for the transport of angular momentum in convective regions. We derive the linear coefficients which link the angular momentum flux to the rotation rate ($\Lambda$- effect) and its gradient ($\alpha$-effect). We compare our results to former relevant numerical work.

We examine the chemical and emission properties of mildly irradiated (G0=1) magnetised shocks in diffuse media (nH=10^2 to 10^4 /cm3) at low to moderate velocities (from 3 to 40 km/s). Results: The formation of some molecules relies on endoergic reactions. In J-shocks, their abundances are enhanced by several orders of magnitude for shock velocities as low as 7 km/s. Otherwise most chemical properties of J-type shocks vary over less than an order of magnitude between velocities from about 7 to about 30 km/s, where H2 dissociation sets in. C-type shocks display a more gradual molecular enhancement as the shock velocity increases. We quantify the energy flux budget (fluxes of kinetic, radiated and magnetic energies) with emphasis on the main cooling lines of the cold interstellar medium. Their sensitivity to shock velocity is such that it allows observations to constrain statistical distributions of shock velocities. We fit various probability distribution functions (PDFs) of shock velocities to spectroscopic observations of the galaxy-wide shock in Stephan's Quintet (SQ) and of a Galactic line of sight sampling diffuse molecular gas in Chamaeleon. In both cases, low velocities bear the greatest statistical weight and the PDF is consistent with a bimodal distribution. In the very low velocity shocks (below 5 km/s), dissipation is due to ion-neutral friction which powers H2 low energy transitions and atomic lines. In moderate velocity shocks (20 km/s and above), the dissipation is due to viscous heating and accounts for most of the molecular emission. In our interpretation a significant fraction of the gas on the line of sight is shocked (from 4% to 66%). For example, C+ emission may trace shocks in UV irradiated gas where C+ is the dominant carbon species.

Our main purpose is to estimate the effect of assuming uniform density on the line-of-sight in PDR chemistry models, compared to a more realistic distribution for which total gas densities may well vary by several orders of magnitude. A secondary goal of this paper is to estimate the amount of molecular hydrogen which is not properly traced by the CO (J = 1 -> 0) line, the so-called "dark molecular gas". We use results from a magnetohydrodynamical (MHD) simulation as a model for the density structures found in a turbulent diffuse ISM with no star-formation activity. The Meudon PDR code is then applied to a number of lines of sight through this model, to derive their chemical structures. It is found that, compared to the uniform density assumption, maximal chemical abundances for H2, CO, CH and CN are increased by a factor 2 to 4 when taking into account density fluctuations on the line of sight. The correlations between column densities of CO, CH and CN with respect to those of H2 are also found to be in better overall agreement with observations. For instance, at N(H2) > 2.10^{20} cm-2, while observations suggest that d[log N(CO)]=d[log N(H2)] = 3.07 +/- 0.73, we find d[log N(CO)]=d[log N(H2)] =14 when assuming uniform density, and d[log N(CO)]=d[log N(H2)] = 5.2 when including density fluctuations.

Interstellar dark clouds are the sites of star formation. Their main component, dihydrogen, exists under two states, ortho and para. H2 is supposed to form in the ortho:para ratio (OPR) of 3:1 and to subsequently decay to almost pure para-H2 (OPR <= 0.001). Only if the H2 OPR is low enough, will deuteration enrichment, as observed in the cores of these clouds, be efficient. The second condition for strong deuteration enrichment is the local disappearance of CO, which freezes out onto grains in the core formation process. We show that this latter condition does not apply to DCO+, which, therefore, should be present all over the cloud. We find that an OPR >= 0.1 is necessary to prevent DCO+ large-scale apparition. We conclude that the inevitable decay of ortho-H2 sets an upper limit of ~6 million years to the age of starless molecular clouds under usual conditions.

Stellar physics and evolution calculations enable a broad range of research in astrophysics. Modules for Experiments in Stellar Astrophysics (MESA) is a suite of open source libraries for a wide range of applications in computational stellar astrophysics. A newly designed 1-D stellar evolution module, MESA star, combines many of the numerical and physics modules for simulations of a wide range of stellar evolution scenarios ranging from very-low mass to massive stars, including advanced evolutionary phases. MESA star solves the fully coupled structure and composition equations simultaneously. It uses adaptive mesh refinement and sophisticated timestep controls, and supports shared memory parallelism based on OpenMP. Independently usable modules provide equation of state, opacity, nuclear reaction rates, and atmosphere boundary conditions. Each module is constructed as a separate Fortran 95 library with its own public interface. Examples include comparisons to other codes and show evolutionary tracks of very low mass stars, brown dwarfs, and gas giant planets; the complete evolution of a 1 Msun star from the pre-main sequence to a cooling white dwarf; the Solar sound speed profile; the evolution of intermediate mass stars through the thermal pulses on the He-shell burning AGB phase; the interior structure of slowly pulsating B Stars and Beta Cepheids; evolutionary tracks of massive stars from the pre-main sequence to the onset of core collapse; stars undergoing Roche lobe overflow; and accretion onto a neutron star. Instructions for downloading and installing MESA can be found on the project web site (http://mesa.sourceforge.net/).

We introduce two simplified nuclear networks that can be used in hydrostatic carbon burning reactions occurring in white dwarf interiors. They model the relevant nuclear reactions in carbon-oxygen white dwarfs (COWDs) approaching ignition in Type Ia supernova (SN Ia) progenitors, including the effects of the main e-captures and \beta-decays that drive the convective Urca process. They are based on studies of a detailed nuclear network compiled by the authors and are defined by approximate sets of differential equations whose derivations are included in the text. The first network, N1, provides a good first order estimation of the distribution of ashes and it also provides a simple picture of the main reactions occurring during this phase of evolution. The second network, N2, is a more refined version of N1 and can reproduce the evolution of the main physical properties of the full network to the 5% level. We compare the evolution of the mole fraction of the relevant nuclei, the neutron excess, the photon energy generation and the neutrino losses between both simplified networks and the detailed reaction network in a fixed temperature and density parcel of gas.

We report the first detection of the ground-state rotational transition of the methylidyne cation CH+ towards the massive star-forming region DR21 with the HIFI instrument onboard the Herschel satellite. The line profile exhibits a broad emission line, in addition to two deep and broad absorption features associated with the DR21 molecular ridge and foreground gas. These observations allow us to determine a CH+ J=1-0 line frequency of 835137 +/- 3 MHz, in good agreement with a recent experimental determination. We estimate the CH+ column density to be a few 1e13 cm^-2 in the gas seen in emission, and > 1e14 cm^-2 in the components responsible for the absorption, which is indicative of a high line of sight average abundance [CH+]/[H] > 1.2x10^-8. We show that the CH+ column densities agree well with the predictions of state-of-the-art C-shock models in dense UV-illuminated gas for the emission line, and with those of turbulent dissipation models in diffuse gas for the absorption lines.

It is widely accepted that the onset of the explosive carbon burning in the core of a CO WD triggers the ignition of a SN Ia. The features of the ignition are among the few free parameters of the SN Ia explosion theory. We explore the role for the ignition process of two different issues: firstly, the ignition is studied in WD models coming from different accretion histories. Secondly, we estimate how a different reaction rate for C-burning can affect the ignition. Two-dimensional hydrodynamical simulations of temperature perturbations in the WD core ("bubbles") are performed with the FLASH code. In order to evaluate the impact of the C-burning reaction rate on the WD model, the evolution code FLASH_THE_TORTOISE from Lesaffre et al. (2006) is used. In different WD models a key role is played by the different gravitational acceleration in the progenitor's core. As a consequence, the ignition is disfavored at a large distance from the WD center in models with a larger central density, resulting from the evolution of initially more massive progenitors. Changes in the C reaction rate at T < 5e8 K slightly influence the ignition density in the WD core, while the ignition temperature is almost unaffected. Recent measurements of new resonances in the C-burning reaction rate (Spillane et al. 2007) do not affect the core conditions of the WD significantly. This simple analysis, performed on the features of the temperature perturbations in the WD core, should be extended in the framework of the state-of-the-art numerical tools for studying the turbulent convection and ignition in the WD core. Future measurements of the C-burning reactions cross section at low energy, though certainly useful, are not expected to affect dramatically our current understanding of the ignition process.

We run mean-field shearing-box numerical simulations with a temperature-dependent resistivity and compare them to a reduced dynamical model. Our simulations reveal the co-existence of two quasi-steady states, a `quiet' state and an `active' turbulent state, confirming the predictions of the reduced model. The initial conditions determine on which state the simulation ultimately settles. The active state is strongly influenced by the geometry of the computational box and the thermal properties of the gas. Cubic domains support permanent channel flows, bar-shaped domains exhibit eruptive behaviour, and horizontal slabs give rise to infrequent channels. Meanwhile, longer cooling time-scales lead to higher saturation amplitudes.

Local simulations of the magnetorotational instability (MRI) in accretion disks can exhibit recurrent coherent structures called channel flows. The formation and destruction of these structures may play a role in the development and saturation of MRI-induced turbulence, and consequently help us understand the time-dependent accretion behaviour of certain astrophysical objects. Previous investigations have revealed that channel solutions are attacked by various parasitic modes, foremost of which is an analogue of the Kelvin-Helmholtz instability. We revisit these instabilities and show how they relate to the classical instabilities of plasma physics, the kink and pinch modes. However, we argue that in most cases channels emerge from developed turbulence and are eventually destroyed by turbulent mixing, not by the parasites. The exceptions are the clean isolated channels which appear in systems near criticality or which emerge from low amplitude initial conditions. These structures inevitably achieve large amplitudes and are only then destroyed, giving rise to eruptive behaviour.

Axisymmetric incompressible modes of the magneto-rotational instability (MRI) with a vertical wavenumber are exact solutions of the non-linear local equations of motion for a disk (shearing box). They are referred to as "channel solutions". Here, we generalize a class of these solutions to include energy losses, viscous, and resistive effects. In the limit of zero shear, we recover the result that torsional Alfv\'en waves are exact solutions of the non-linear equations. Our method allows the extension of these solutions into the dissipative regime. These new solutions serve as benchmarks for simulations including dissipation and energy loss, and to calibrate numerical viscosity and resistivity in the Zeus3D code. We quantify the anisotropy of numerical dissipation and compute its scaling with time and space resolution. We find a strong dependence of the dissipation on the mean magnetic field that may affect the saturation state of the MRI as computed with Zeus3D. It is also shown that elongated grid cells generally preclude isotropic dissipation and that a Courant time step smaller than that which is commonly used should be taken to avoid spurious anti-diffusion of magnetic field.

I present time-dependent analytical solutions of quasi-steady shocks with cooling, where quasi-steady shocks are objects composed of truncated steady-state models of shocks at any intermediate time. I compare these solutions to simulations with a hydrodynamical code and finally discuss quasi-steady shocks as approximations to time-dependent shocks. Large departure of both the adiabatic and steady-state approximations from the quasi-steady solution emphasise the importance of the cooling history in determining the trajectory of a shock.

Aims. We probe the effect of turbulent diffusion on the chemistry at the interface between a cold neutral medium (CNM) cloudlet and the warm neutral medium (WNM). Methods. We perform moving grid, multifluid, 1D, hydrodynamical simulations with chemistry including thermal and chemical diffusion. The diffusion coefficients are enhanced to account for turbulent diffusion. We post-process the steady-states of our simulations with a crude model of radiative transfer to compute line profiles. Results. Turbulent diffusion spreads out the transition region between the CNM and the WNM. We find that the CNM slightly expands and heats up: its CH and H$_2$ content decreases due to the lower density. The change of physical conditions and diffusive transport increase the H$^+$ content in the CNM which results in increased OH and H$_2$O. Diffusion transports some CO out of the CNM. It also brings H$_2$ into contact with the warm gas with enhanced production of CH$^+$, H$_3^+$, OH and H$_2$O at the interface. O lines are sensitive to the spread of the thermal profile in the intermediate region between the CNM and the WNM. Enhanced molecular content at the interface of the cloud broadens the molecular line profiles and helps exciting transitions of intermediate energy. The relative molecular yield are found higher for bigger clouds. Conclusions. Turbulent diffusion can be the source of additional molecular production and should be included in chemical models of the interstellar medium (ISM). It also is a good candidate for the interpretation of observational problems such as warm H$_2$, CH$^+$ formation and presence of H$_3^+$.

Doubly-degenerate binary systems consisting of two white dwarfs both composed of carbon and oxygen and close enough that mass is transferred from the less massive to the more massive are possible progenitors of type Ia supernovae. If the mass transfer rate is slow enough that the accreting white dwarf can reach 1.38 solar masses then it can ignite carbon degenerately at its centre. This can lead to a thermonuclear runaway and thence a supernova explosion. However if the accretion rate is too high the outer layers of the white dwarf heat up too much and carbon ignites there non-degenerately. A series of mild carbon flashes can then propagate inwards and convert the carbon to neon relatively gently. There is no thermonuclear runaway and no supernova. We have determined the critical rate for accretion and find it to be generally about two-fifths of the Eddington rate. In the case of actual bianry stars the mass transfer rate falls off as mass is transferred so we find that this rate can be very much exceeded at the onset of mass transfer. We determine combinations of white dwarf masses that can lead to central degenerate carbon ignition.

Theoretical models predict that the initial metallicity of the progenitor of a Type Ia supernova (SN Ia) affects the peak of the supernova light curve. This can cause a deviation from the standard light curve calibration employed when using SNe Ia as standardizable distance candles and, if there is a systematic evolution of the metallicity of SN Ia progenitors, could affect the determination of cosmological parameters. Here we show that this metallicity effect can be substantially larger than has been estimated previously, when the neutronisation in the immediate pre-explosion phase in the CO white dwarf is taken into account, and quantitatively assess the importance of metallicity evolution for determining cosmological parameters. We show that, in principle, a moderate and plausible amount of metallicity evolution could mimic a lambda-dominated, flat Universe in an open, lambda-free Universe. However, the effect of metallicity evolution appears not large enough to explain the high-z SN Ia data in a flat Universe, for which there is strong independent evidence, without a cosmological constant. We also estimate the systematic uncertainties introduced by metallicity evolution in a lambda-dominated, flat Universe. We find that metallicity evolution may limit the precision with which Omega_m and w can be measured and that it will be difficult to distinguish evolution of the equation of state of dark energy from metallicity evolution, at least from SN Ia data alone.

Thanks to a stellar evolution code able to compute through the C-flash we link the binary population synthesis of single degenerate progenitors of type Ia supernovae (SNe Ia) to their physical condition at the time of ignition. We show that there is a large range of possible ignition densities and we detail how their probability distribution depends on the accretion properties. The low density peak of this distribution qualitatively reminds of the clustering of the luminosities of Branch-normal SNe Ia. We tighten the possible range of initial physical conditions for explosion models: they form a one-parameter family, independent of the metallicity. We discuss how these results may be modified if we were to relax our hypothesis of a permanent Hachisu wind or if we were to include electron captures.

We compute numerical simulations of spherical collapse triggered by a slow increase in external pressure. We compare isothermal models to models including cooling with a simple but self-consistent treatment of the coupling between gas, grains and radiation field temperatures. The hydrostatic equilibrium appears to hold past the marginally stable state, until the collapse proceeds. The last hydrostatic state before collapse has a lower central gas temperature in the centre due to the enhanced coupling between gas, grains and radiation field. This results in slightly lower pressure gradients in the bulk of the envelope which is hence slightly more extended than in the isothermal case. Due to the sensitivity of the collapse on these initial conditions, protostellar infall velocities in the envelope turn out to be much slower in the case with cooling.Our models also compute the radiative transfer and a rather large chemical network coupled to gas dynamics. However, we note that the steady-state chemisorption of CO is sufficient to provide an accurate cooling function of the gas. This justifies the use of post-processing techniques to account for the abundance of observed molecules. Existing observations of infall signatures put very stringent constraints on the kinematics and temperature profile of the class 0 protostar IRAM 04191+1522. We show that isothermal models fail to account for the innermost slow infall motions observed, even with the most hydrostatic initial conditions. In contrast, models with cooling reproduce the general shape of the temperature profile inferred from observations and are in much better agreement with the infall signatures in the inner 3000 AU.

The double pulsar J0737--3039 has become an important astrophysical laboratory for testing fundamental physics. Here we demonstrate that the low measured mass of Pulsar B can be used to constrain the equation of state of neutron star matter {\em under the assumption} that it formed in an electron-capture supernova. We show that the observed orbital parameters as well as the likely evolutionary history of the system support such a hypothesis and discuss future refinements that will improve the constraints this test may provide.

We derive a new formalism for convective motions involving two radial flows. This formalism provides a framework for convective models that guarantees consistency for the chemistry and the energy budget in the flows, allows time-dependence and accounts for the interaction of the convective motions with the global contraction or expansion of the star. In the one-stream limit the formalism reproduces several existing convective models and allows them to treat the chemistry in the flows. We suggest a version of the formalism that can be implemented easily in a stellar evolution code. We then apply the formalism to convective Urca cores in Chandrasekhar mass white dwarfs and compare it to previous studies. We demonstrate that, in degenerate matter, nuclear reactions that change the number of electrons strongly influence the convective velocities and we show that the net energy budget is sensitive to the mixing. We illustrate our model by computing stationary convective cores with Urca nuclei. Even a very small mass fraction of Urca nuclei (as little as $10^{-8}$) strongly influences the convective velocities. We conclude that the proper modelling of the Urca process is essential for determining the ignition conditions for the thermonuclear runaway in Chandrasekhar-mass white dwarfs.

One possible fate of an accreting white dwarf is explosion in a type Ia supernova. However, the route to the thermonuclear runaway has always been uncertain owing to the lack of a convective model consistent with the Urca process. We derive a formalism for convective motions involving two radial flows. This formalism provides a framework for convective models that guarantees self-consistency for chemistry and energy budget, allows time-dependence and describes the interaction of convective motions with the global contraction or expansion of the star. In the one-stream limit, we reproduce several already existing convective models and allow them to treat chemistry. We also suggest as a model easy to implement in a stellar evolution code. We apply this formalism to convective Urca cores in Chandrasekhar mass white dwarfs. We stress that in degenerate matter, nuclear reactions that change the number of electrons strongly influence the convective velocities. We point out the sensitivity of the energy budget on the mixing. We illustrate our model by computing {\it stationary} convective cores with Urca nuclei. We show that even a very small mass fraction of Urca nuclei ($10^{-8}$) strongly influences the convective velocities. Finally, we present preliminary computations of the late evolution of a close to Chandrasekhar mass C+O white dwarf including the convective Urca process.

We present time-dependent 1D simulations of multifluid magnetic shocks with chemistry resolved down to the mean free path. They are obtained with an adaptive moving grid implemented with an implicit scheme. We examine a broad range of parameters relevant to conditions in dense molecular clouds, with preshock densities between 10^3 and 10^5 cm-3, velocities between 10 and 40 km/s, and three different scalings for the transverse magnetic field: B=0,0.1,1 \mu G \sqrt{n.cm3}. We first use this study to validate the results of Chi\`eze, Pineau des For\^ets & Flower (1998), in particular the long delays necessary to obtain steady C-type shocks, and we provide evolutionary time-scales for a much greater range of parameters. We also present the first time-dependent models of dissociative shocks with a magnetic precursor, including the first models of stationary CJ shocks in molecular conditions. We find that the maximum speed for steady C-type shocks is reached before the occurrence of a sonic point in the neutral fluid, unlike previously thought. As a result, the maximum speed for C-shocks is lower than previously believed. Finally, we find a large amplitude bouncing instability in J-type fronts near the H2 dissociation limit (u ~ 25-30 km/s), driven by H2 dissociation/reformation. At higher speeds, we find an oscillatory behaviour of short period and small amplitude linked to collisional ionisation of H. Both instabilities are suppressed after some time when a magnetic field is present. In a companion paper, we use the present simulations to validate a new semi-analytical construction method for young low-velocity magnetic shocks based on truncated steady-state models.

In the first paper of this series (Paper I) we computed time dependent simulations of multifluid shocks with chemistry and a transverse magnetic field frozen in the ions, using an adaptive moving grid. In this paper, we present new analytical results on steady-state molecular shocks. Relationships between density and pressure in the neutral fluid are derived for the cold magnetic precursor, hot magnetic precursor, adiabatic shock front, and the following cooling layer. The compression ratio and temperature behind a fully dissociative adiabatic shock is also derived. To prove that these results may even hold for intermediate ages, we design a test to locally characterise the validity of the steady state equations in a time-dependent shock simulation. Applying this tool to the results of Paper I, we show that most of these shocks (all the stable ones) are indeed in a quasi-steady state at all times, i.e. : a given snapshot is composed of one or more truncated steady shock. Finally, we use this property to produce a construction method of any intermediate time of low velocity shocks (u < 20 km/s) with only a steady-state code. In particular, this method allows one to predict the occurrence of steady CJ-type shocks more accurately than previously proposed criteria.