sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Lefèvre, Charlène

Normalized to: Lefèvre, C.

12 article(s) in total. 44 co-authors, from 1 to 6 common article(s). Median position in authors list is 3,0.

[1]  oai:arXiv.org:2002.01346  [pdf] - 2076877
Physical and chemical modeling of the starless core L1512
Comments: 22 pages, 18 figures, accepted for publication in A&A
Submitted: 2020-02-04, last modified: 2020-02-18
The deuterium fractionation in starless cores gives us a clue to estimate their lifetime scales, thus allowing us to distinguish between different dynamical theories of core formation. Cores also seem to be subject to a differential N2 and CO depletion which was not expected from models. We aim to make a survey of 10 cores to estimate their lifetime scales and depletion profiles in detail. After L183, in Serpens, we present the second cloud of the series, L1512 in Auriga. To constrain the lifetime scale, we perform chemical modeling of the deuteration profiles across L1512 based on dust extinction measurements from near-infrared observations and non-local thermal equilibrium radiative transfer with multiple line observations of N2H+, N2D+, DCO+, C18O, and 13CO, plus H2D+ (1$_{10}$--1$_{11}$). We find a peak density of 1.1$\times$10$^5$ cm$^{-3}$ and a central temperature of 7.5$\pm$1 K, which are respectively higher and lower compared with previous dust emission studies. The depletion factors of N2H+ and N2D+ are 27$^{+17}_{-13}$ and 4$^{+2}_{-1}$ in L1512, intermediate between the two other more advanced and denser starless core cases, L183 and L1544. These factors also indicate a similar freeze-out of N2 in L1512, compared to the two others despite a peak density one to two orders of magnitude lower. Retrieving CO and N2 abundance profiles with the chemical model, we find that CO has a depletion factor of $\sim$430-870 and the N2 profile is similar to that of CO unlike towards L183. Therefore, L1512 has probably been living long enough so that N2 chemistry has reached steady state. N2H+ modeling remains compulsory to assess the precise physical conditions in the center of cold starless cores, rather than dust emission. L1512 is presumably older than 1.4 Myr. Therefore, the dominating core formation mechanism should be ambipolar diffusion for this source.
[2]  oai:arXiv.org:2002.00592  [pdf] - 2076875
Questioning the spatial origin of complex organic molecules in young protostars with the CALYPSO survey
Comments: Accepted for publication in Astronomy and Astrophysics
Submitted: 2020-02-03
Complex organic molecules (COMs) have been detected in a few Class 0 protostars but their origin is not well understood. Going beyond studies of individual objects, we want to investigate the origin of COMs in young protostars on a statistical basis. We use the CALYPSO survey performed with the IRAM PdBI to search for COMs at high angular resolution in a sample of 26 solar-type protostars, including 22 Class 0 and four Class I objects. Methanol is detected in 12 sources and tentatively in one source, which represents half of the sample. Eight sources (30%) have detections of at least three COMs. We find a strong chemical differentiation in multiple systems with five systems having one component with at least three COMs detected but the other component devoid of COM emission. The internal luminosity is found to be the source parameter impacting the most the COM chemical composition of the sources, while there is no obvious correlation between the detection of COM emission and that of a disk-like structure. A canonical hot-corino origin may explain the COM emission in four sources, an accretion-shock origin in two or possibly three sources, and an outflow origin in three sources. The CALYPSO sources with COM detections can be classified into three groups on the basis of the abundances of oxygen-bearing molecules, cyanides, and CHO-bearing molecules. These chemical groups correlate neither with the COM origin scenarii, nor with the evolutionary status of the sources if we take the ratio of envelope mass to internal luminosity as an evolutionary tracer. We find strong correlations between molecules that are a priori not related chemically (for instance methanol and methyl cyanide), implying that the existence of a correlation does not imply a chemical link. [abridged]
[3]  oai:arXiv.org:2001.06355  [pdf] - 2057880
Searching for kinematic evidence of Keplerian disks around Class 0 protostars with CALYPSO
Comments: Accepted for publication in Astronomy & Astrophysics
Submitted: 2020-01-17
The formation of protoplanetary disks is not well understood. To understand how and when these disks are formed, it is crucial to characterize the kinematics of the youngest protostars at a high angular resolution. Here we study a sample of 16 Class 0 protostars to measure their rotation profile at scales from 50 to 500~au and search for Keplerian rotation. We used high-angular-resolution line observations obtained with the Plateau de Bure Interferometer as part of the CALYPSO large program. From $\mathrm{^{13}CO}$ ($J=2-1$), $\mathrm{C^{18}O}$ ($J=2-1$) and SO ($N_{j}=5_{6}-4_{5}$) moment maps, we find that seven sources show rotation about the jet axis at a few hundred au scales: SerpS-MM18, L1448-C, L1448-NB, L1527, NGC1333- IRAS2A, NGC1333-IRAS4B, and SVS13-B. We analyzed the kinematics of these sources in the $uv$ plane to derive the rotation profiles down to 50~au scales. We find evidence for Keplerian rotation in only two sources, L1527 and L1448-C. Overall, this suggests that Keplerian disks larger than 50 au are uncommon around Class 0 protostars. However, in some of the sources, the line emission could be optically thick and dominated by the envelope emission. Due to the optical thickness of these envelopes, some of the disks could have remained undetected in our observations.
[4]  oai:arXiv.org:1911.03257  [pdf] - 2046321
Dust evolution in pre-stellar cores
Comments: 6 pages, 5 figures, to appear in the proceedings of the international conference entitled mm Universe @ NIKA2, Grenoble (France), June 2019, EPJ Web of conferences
Submitted: 2019-11-08, last modified: 2019-11-14
Dust grains are the building {blocks} of future planets. They evolve in size, shape and composition during the life cycle of the interstellar medium. We seek to understand the process which leads from diffuse medium grains to dust grains in the vicinity of protostars inside disks. As a first step, we propose to characterize the dust evolution inside pre-stellar cores thanks to multi-wavelength observations. We will present how NIKA2 maps are crucial to better constrain dust properties and {we will} introduce SIGMA: a new flexible dust model in open access.
[5]  oai:arXiv.org:1911.03248  [pdf] - 2046320
NOEMA complementarity with NIKA2
Comments: 6 pages, 3 figures, to appear in the proceedings of the international conference entitled mm Universe @ NIKA2, Grenoble (France), June 2019, EPJ Web of conferences
Submitted: 2019-11-08
IRAM operates two observatories - the 30-meter Telescope on Pico Veleta in Spain and NOEMA, an interferometer of ten 15-meter antennas on Plateau de Bure in France. Both observatories allow to observe at millimeter wavelengths. Here, we aim at discussing the complementary between continuum observations with NOEMA and NIKA2 at the 30m and their role at the cutting edge of research in astronomy. In particular, we will review possible synergies of continuum studies from nearby star forming regions to high redshift galaxies at cosmological distances.
[6]  oai:arXiv.org:1810.11221  [pdf] - 1815012
Characterizing young protostellar disks with the CALYPSO IRAM-PdBI survey: large Class 0 disks are rare
Comments: Accepted for publication in Astronomy \& Astrophysics. 24 pages of main text, 22 pages of additional content (under the form of three appendices) - revised version including language and typos corrections
Submitted: 2018-10-26, last modified: 2018-11-12
Understanding the formation mechanisms of protoplanetary disks and multiple systems, and their pristine properties, is a key question for modern astrophysics. The properties of the youngest disks, embedded in rotating infalling protostellar envelopes, have largely remained unconstrained up to now. In the framework of the IRAM-PdBI CALYPSO survey, we have obtained sub-arcsecond observations of the dust continuum emission at 231 GHz and 94 GHz, for a sample of 16 solar-type Class 0 protostars. In an attempt to identify disk-like structures embedded at small scales in the protostellar envelopes, we model the dust continuum emission visibility profiles using both Plummer-like envelope models and envelope models including additional Gaussian disk-like components. Our analysis shows that in the CALYPSO sample, 11 of the 16 Class 0 protostars are better reproduced by models including a disk-like dust continuum component contributing to the flux at small scales, but less than 25% of these candidate protostellar disks are resolved at radii > 60 au. Including all available literature constraints on Class 0 disks at subarcsecond scales, we show that our results are representative: most (> 72% in a sample of 26 protostars) Class 0 protostellar disks are small and emerge only at radii < 60 au. Our multiplicity fraction at scales 100-5000 au is in global agreement with the multiplicity properties of Class I protostars at similar scales. We confront our observational constraints on the disk size distribution in Class 0 protostars to the typical disk properties from protostellar formation models. Because they reduce the centrifugal radius, and produce a disk size distribution peaking at radii <100 au during the main accretion phase, magnetized models of rotating protostellar collapse are favored by our observations.
[7]  oai:arXiv.org:1707.02262  [pdf] - 1585664
CALYPSO view of SVS 13A with PdBI: Multiple jet sources
Comments: 9 pages, 11 figures
Submitted: 2017-07-07
Aims. We wish to clarify the origin of the multiple jet features emanating from the binary protostar SVS 13A (= VLA4A/VLA4B). Methods. We used the Plateau de Bure Interferometer to map at 0.3-0.8" (~70-190 au) dust emission at 1.4 mm, CO(2-1), SiO(5-4), SO(65-54). Revised proper motions for VLA4A/4B and jet wiggling models are computed to clarify their respective contribution. Results. VLA4A shows compact dust emission suggestive of a disk < 50 au, and is the hot corino source, while CO/SiO/SO counterparts to the small-scale H2 jet originate from VLA4B and reveal the jet variable velocity structure. This jet exhibits ~ 3" wiggling consistent with orbital motion around a yet undetected ~ 20-30 au companion to VLA4B, or jet precession. Jet wiggling combined with velocity variability can explain the large apparent angular momentum in CO bullets. We also uncover a synchronicity between CO jet bullets and knots in the HH7-11 chain demonstrating that they trace two distinct jets. Their ~ 300 yr twin outburst period may be triggered by close perihelion approach of VLA4A in an eccentric orbit around VLA4B. A third jet is tentatively seen at PA ~ 0 degrees. Conclusions. SVS13 A harbors at least 2 and possibly 3 distinct jet sources. The CO and HH7-11 jets are launched from quasi-coplanar disks, separated by 20-70 au. Their synchronous major events every 300 yr favor external triggering by close binary interactions, a scenario also invoked for FU Or outbursts.
[8]  oai:arXiv.org:1608.05026  [pdf] - 1475489
First image of the L1157 molecular jet by the CALYPSO IRAM-PdBI survey
Comments: 6 pages, 3 figures, accepted for publication in A&A Letter
Submitted: 2016-08-17
Fast jets are thought to be a crucial ingredient of star formation because they might extract angular momentum from the disk and thus allow mass accretion onto the star. However, it is unclear whether jets are ubiquitous, and likewise, their contribution to mass and angular momentum extraction during protostar formation remains an open question. Our aim is to investigate the ejection process in the low-mass Class 0 protostar L1157. This source is associated with a spectacular bipolar outflow, and the recent detection of high-velocity SiO suggests the occurrence of a jet. Observations of CO 2-1 and SiO 5-4 at 0.8" resolution were obtained with the IRAM Plateau de Bure Interferometer as part of the CALYPSO large program. The jet and outflow structure were fit with a precession model. We derived the column density of CO and SiO, as well as the jet mass-loss rate and mechanical luminosity. High-velocity CO and SiO emission resolve for the first time the first 200 au of the outflow-driving molecular jet. The jet is strongly asymmetric, with the blue lobe 0.65 times slower than the red lobe. This suggests that the large-scale asymmetry of the outflow is directly linked to the jet velocity and that the asymmetry in the launching mechanism has been at work for the past 1800 yr. Velocity asymmetries are common in T Tauri stars, which suggests that the jet formation mechanism from Class 0 to Class II stages might be similar. Our model simultaneously fits the inner jet and the clumpy 0.2 pc scale outflow by assuming that the jet precesses counter-clockwise on a cone inclined by 73 degree to the line of sight with an opening angle of 8 degree on a period of 1640 yr. The estimated jet mass flux and mechanical luminosity are 7.7e-7 Msun/yr, and 0.9 Lsun, indicating that the jet could extract at least 25% of the gravitational energy released by the forming star.
[9]  oai:arXiv.org:1512.05119  [pdf] - 1335506
On the importance of scattering at 8 microns: Brighter than you think
Comments: letter 4 main pages, 2 pages of online material, 7 figures
Submitted: 2015-12-16
Context. Extinction and emission of dust models need for observational constraints to be validated. The coreshine phenomenon has already shown the importance of scattering in the 3 to 5 micron range and its ability to validate dust properties for dense cores. Aims. We want to investigate whether scattering can also play a role at longer wavelengths and to place even tighter constraints on the dust properties. Methods. We analyze the inversion of the Spitzer 8 micron map of the dense molecular cloud L183, to examine the importance of scattering as a potential contributor to the line-of-sight extinction. Results. The column density deduced from the inversion of the 8 micron map, when we neglect scattering, disagrees with all the other column density measurements of the same region. Modeling confirms that scattering at 8 microns is not negligible with an intensity of several hundred kJy per sr. This demonstrates the need of efficiently scattering dust grains at MIR wavelengths up to 8 microns. Coagulated aggregates are good candidates and might also explain the discrepancy at high extinction between E(J-K) et tau(9.7) toward dense molecular clouds. Further investigation requires considering efficiently scattering dust grains including ices as realistic dust models.
[10]  oai:arXiv.org:1508.04691  [pdf] - 1296247
Grain size limits derived from 3.6 {\mu}m and 4.5 {\mu}m coreshine
Comments: 23 pages, 18 figures, accepted for publication in A&A
Submitted: 2015-08-17
Recently discovered scattered light from molecular cloud cores in the wavelength range 3-5 {\mu}m (called "coreshine") seems to indicate the presence of grains with sizes above 0.5 {\mu}m. We aim to analyze 3.6 and 4.5 {\mu}m coreshine from molecular cloud cores to probe the largest grains in the size distribution. We analyzed dedicated deep Cycle 9 Spitzer IRAC observations in the 3.6 and 4.5 {\mu}m bands for a sample of 10 low-mass cores. We used a new modeling approach based on a combination of ratios of the two background- and foreground-subtracted surface brightnesses and observed limits of the optical depth. The dust grains were modeled as ice-coated silicate and carbonaceous spheres. We discuss the impact of local radiation fields with a spectral slope differing from what is seen in the DIRBE allsky maps. For the cores L260, ecc806, L1262, L1517A, L1512, and L1544, the model reproduces the data with maximum grain sizes around 0.9, 0.5, 0.65, 1.5, 0.6, and > 1.5 {\mu}m, respectively. The maximum coreshine intensities of L1506C, L1439, and L1498 in the individual bands require smaller maximum grain sizes than derived from the observed distribution of band ratios. Additional isotropic local radiation fields with a spectral shape differing from the DIRBE map shape do not remove this discrepancy. In the case of Rho Oph 9, we were unable to reliably disentangle the coreshine emission from background variations and the strong local PAH emission. Considering surface brightness ratios in the 3.6 and 4.5 {\mu}m bands across a molecular cloud core is an effective method of disentangling the complex interplay of structure and opacities when used in combination with observed limits of the optical depth.
[11]  oai:arXiv.org:1501.00861  [pdf] - 926688
Can we trace very cold dust from its emission alone ?
Comments: Letter to A&A (accepted for publication). must be viewed with ACROBAT READER for full enhancement. Otherwise, check images in Appendix A
Submitted: 2015-01-05
Context. Dust is a good tracer of cold dark clouds but its column density is difficult to quantify. Aims. We want to check whether the far-infrared and submillimeter high-resolution data from Herschel SPIRE and PACS cameras combined with ground-based telescope bolometers allow us to retrieve the whole dust content of cold dark clouds. Methods. We compare far-infrared and submillimeter emission across L183 to the 8 $\mu$m absorption map from Spitzer data and fit modified blackbody functions towards three different positions. Results. We find that none of the Herschel SPIRE channels follow the cold dust profile seen in absorption. Even the ground-based submillimeter telescope observations, although more closely following the absorption profile, cannot help to characterize the cold dust without external information such as the dust column density itself. The difference in dust opacity can reach up to a factor of 3 in prestellar cores of high extinction. Conclusions. In dark clouds, the amount of very cold dust cannot be measured from its emission alone. In particular, studies of dark clouds based only on Herschel data can miss a large fraction of the dust content. This has an impact on core and filament density profiles, masse and stability estimates.
[12]  oai:arXiv.org:1407.5804  [pdf] - 903574
Dust properties inside molecular clouds from coreshine modeling and observations
Comments:
Submitted: 2014-07-22
Context. Using observations to deduce dust properties, grain size distribution, and physical conditions in molecular clouds is a highly degenerate problem. Aims. The coreshine phenomenon, a scattering process at 3.6 and 4.5 $\mu$m that dominates absorption, has revealed its ability to explore the densest parts of clouds. We want to use this effect to constrain the dust parameters. The goal is to investigate to what extent grain growth (at constant dust mass) inside molecular clouds is able to explain the coreshine observations. We aim to find dust models that can explain a sample of Spitzer coreshine data. We also look at the consistency with near-infrared data we obtained for a few clouds. Methods. We selected four regions with a very high occurrence of coreshine cases: Taurus-Perseus, Cepheus, Chameleon and L183/L134. We built a grid of dust models and investigated the key parameters to reproduce the general trend of surface bright- nesses and intensity ratios of both coreshine and near-infrared observations with the help of a 3D Monte-Carlo radiative transfer code. The grid parameters allow to investigate the effect of coagulation upon spherical grains up to 5 $\mu$m in size derived from the DustEm diffuse interstellar medium grains. Fluffiness (porosity or fractal degree), ices, and a handful of classical grain size distributions were also tested. We used the near- and mostly mid-infrared intensity ratios as strong discriminants between dust models. Results. The determination of the background field intensity at each wavelength is a key issue. In particular, an especially strong background field explains why we do not see coreshine in the Galactic plane at 3.6 and 4.5 $\mu$m. For starless cores, where detected, the observed 4.5 $\mu$m / 3.6 $\mu$m coreshine intensity ratio is always lower than $\sim$0.5 which is also what we find in the models for the Taurus-Perseus and L183 directions. Embedded sources can lead to higher fluxes (up to four times greater than the strongest starless core fluxes) and higher coreshine ratios (from 0.5 to 1.1 in our selected sample). Normal interstellar radiation field conditions are sufficient to find suitable grain models at all wavelengths for starless cores. The standard interstellar grains are not able to reproduce observations and, due to the multi-wavelength approach, only a few grain types meet the criteria set by the data. Porosity does not affect the flux ratios while the fractal dimension helps to explain coreshine ratios but does not seem able to reproduce near-infrared observations without a mix of other grain types. Conclusions. Combined near- and mid-infrared wavelengths confirm the potential to reveal the nature and size distribution of dust grains. Careful assessment of the environmental parameters (interstellar and background fields, embedded or nearby reddened sources) is required to validate this new diagnostic.