Double-lined spectroscopic binaries (SB2s) are one of the main sources of stellar masses, as additional observations are only needed to give the inclinations of the orbital planes in order to obtain the individual masses of the components. For this reason, we are observing a selection of SB2s using the SOPHIE spectrograph at the Haute-Provence observatory in order to precisely determine their orbital elements. Our objective is to finally obtain masses with an accuracy of the order of one percent by combining our radial velocity (RV) measurements and the astrometric measurements that will come from the Gaia satellite. We present here the RVs and the re-determined orbits of 10 SB2s. In order to verify the masses we will derive from Gaia, we obtained interferometric measurements of the ESO VLTI for one of these SB2s. Adding the interferometric or speckle measurements already published by us or by others for 4 other stars, we finally obtain the masses of the components of 5 binary stars, with masses ranging from 0.51 to 2.2 solar masses, including main-sequence dwarfs and some more evolved stars whose location in the HR diagram has been estimated.

Context. The large quantity of high-quality asteroseismic data that obtained from space-based photometric missions and the accuracy of the resulting frequencies motivate a careful consideration of the accuracy of computed oscillation frequencies of stellar models, when applied as diagnostics of the model properties. Aims. Based on models of red-giant stars that have been independently calculated using different stellar evolution codes, we investigate the extent to which the differences in the model calculation affect the model oscillation frequencies. Methods. For each of the models, which cover four different masses and different evolution stages on the red-giant branch, we computed full sets of low-degree oscillation frequencies using a single pulsation code and, from these frequencies, typical asteroseismic diagnostics. In addition, we carried out preliminary analyses to relate differences in the oscillation properties to the corresponding model differences. Results. In general, the differences in asteroseismic properties between the different models greatly exceed the observational precision of these properties, in particular for the nonradial modes whose mixed acoustic and gravity-wave character makes them sensitive to the structure of the deep stellar interior. In some cases, identifying these differences led to improvements in the final models presented here and in Paper I; here we illustrate particular examples of this. Conclusions. Further improvements in stellar modelling are required in order fully to utilise the observational accuracy to probe intrinsic limitations in the modelling. However, our analysis of the frequency differences and their relation to stellar internal properties provides a striking illustration of the potential of the mixed modes of red-giant stars for the diagnostics of stellar interiors.

Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data

Over the course of its history, the Milky Way has ingested multiple smaller satellite galaxies. While these accreted stellar populations can be forensically identified as kinematically distinct structures within the Galaxy, it is difficult in general to precisely date the age at which any one merger occurred. Recent results have revealed a population of stars that were accreted via the collision of a dwarf galaxy, called \textit{Gaia}-Enceladus, leading to a substantial pollution of the chemical and dynamical properties of the Milky Way. Here, we identify the very bright, naked-eye star $\nu$\,Indi as a probe of the age of the early in situ population of the Galaxy. We combine asteroseismic, spectroscopic, astrometric, and kinematic observations to show that this metal-poor, alpha-element-rich star was an indigenous member of the halo, and we measure its age to be $11.0 \pm 0.7$ (stat) $\pm 0.8$ (sys)$\,\rm Gyr$. The star bears hallmarks consistent with it having been kinematically heated by the \textit{Gaia}-Enceladus collision. Its age implies that the earliest the merger could have begun was 11.6 and 13.2 Gyr ago at 68 and 95% confidence, respectively. Input from computations based on hierarchical cosmological models tightens (i.e. reduces) slightly the above limits.

(Abridged). We introduce the Aarhus Red Giants Challenge, a series of detailed comparisons between widely used stellar evolution and oscillation codes aiming at establishing the minimum level of uncertainties in properties of red giants arising solely from numerical implementations. Using 9 state-of-the-art stellar evolution codes, we defined a set of input physics and physical constants for our calculations and calibrated the convective efficiency to a specific point on the main sequence. We produced evolutionary tracks and stellar structure models at fixed radius along the red-giant branch for masses of 1.0 M$_\odot$, 1.5 M$_\odot$, 2.0 M$_\odot$, and 2.5 M$_\odot$, and compared the predicted stellar properties. Once models have been calibrated on the main sequence we find a residual spread in the predicted effective temperatures across all codes of ~20 K at solar radius and ~30-40 K in the RGB regardless of the considered stellar mass. The predicted ages show variations of 2-5% (increasing with stellar mass) which we track down to differences in the numerical implementation of energy generation. The luminosity of the RGB-bump shows a spread of about 10% for the considered codes, which translates into magnitude differences of ~0.1 mag in the optical V-band. We also compare the predicted [C/N] abundance ratio and found a spread of 0.1 dex or more for all considered masses. Our comparisons show that differences at the level of a few percent still remain in evolutionary calculations of red giants branch stars despite the use of the same input physics. These are mostly due to differences in the energy generation routines and interpolation across opacities, and call for further investigations on these matters in the context of using properties of red giants as benchmarks for astrophysical studies.

When modelling stars with masses larger than 1.2Msun with no observed chemical peculiarity, atomic diffusion is often neglected because, on its own, it causes unrealistic surface abundances compared with those observed. The reality is that atomic diffusion is in competition with other transport processes. The purpose of this study is to quantify the opposite or conjugated effects of atomic diffusion and rotationally induced mixing in stellar models of low mass stars. Our second goal is to estimate the impact of neglecting both rotational mixing and atomic diffusion in stellar parameter inferences for stars with masses larger than 1.3Msun. Using the AIMS code, we infer the masses and ages of a set of representative artificial stars for which models were computed with the CESTAM evolution code, taking into account rotationally induced mixing and atomic diffusion, including radiative accelerations. We show that for masses lower than 1.3Msun, rotation dominates the transport of chemical elements, and strongly reduces the effect of atomic diffusion, with net surface abundance modifications similar to solar ones. At larger mass, atomic diffusion and rotation are competing equally. Above 1.44Msun, atomic diffusion dominates in stellar models with initial rotation smaller than 80km.s-1 producing a chemical peculiarity which is not observed in Kepler-legacy stars. This indicates that a transport process of chemical elements is missing. Importantly, neglecting rotation and atomic diffusion (including radiative accelerations) in the models, when inferring the parameters of F-type stars, may lead to errors of 5%, 2.5% and 25% respectively for stellar masses, radii and ages. Atomic diffusion (including radiative accelerations) and rotational mixing should be taken into account in stellar models in order to determine accurate stellar parameters.

The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of $R_{\star}=0.726\pm0.014 R_{\odot}$. We also derived the stellar density from the transits light curves ($\rho_{\star}=1.82\pm0.19 \rho_{\odot}$), which finally gives a direct estimate of the mass ($M_{\star}=0.696\pm0.078 M_{\odot}$) with a correlation of 0.46 between $R_{\star}$ and $M_{\star}$. This new mass is smaller than that derived from the C2kSMO stellar evolutionary model, which provides a mass range of 0.755$-$0.810 ($\pm 0.040$) $M_{\odot}$. This allows us to infer the mass, radius and density of the two transiting exoplanets of the system. We then use an inference model to obtain the internal parameters of these two transiting exoplanets. Moreover, we find that planet $b$ and $c$ have smaller radii than previously estimated ($1.500\pm0.057$ and $1.415\pm0.049 R_{\oplus}$, respectively); this clearly puts these planets out of the gap in the exoplanetary radii distribution and validates their super-Earth nature. Planet $b$ is more massive than planet $c$, but possibly less dense. We investigate whether this could be caused by partial melting of the mantle and find that tidal heating due to non-zero eccentricity of planet $b$ may be powerful enough. The system of HD219134 constitutes a very valuable benchmark for both stellar physics and exoplanetary science. The direct determination of the stellar density, radius and mass should be more extensively applied to provide accurate exoplanets properties and calibrate stellar models.

(Abridged) The Maunakea Spectroscopic Explorer (MSE) is an end-to-end science platform for the design, execution and scientific exploitation of spectroscopic surveys. It will unveil the composition and dynamics of the faint Universe and impact nearly every field of astrophysics across all spatial scales, from individual stars to the largest scale structures in the Universe. Major pillars in the science program for MSE include (i) the ultimate Gaia follow-up facility for understanding the chemistry and dynamics of the distant Milky Way, including the outer disk and faint stellar halo at high spectral resolution (ii) galaxy formation and evolution at cosmic noon, via the type of revolutionary surveys that have occurred in the nearby Universe, but now conducted at the peak of the star formation history of the Universe (iii) derivation of the mass of the neutrino and insights into inflationary physics through a cosmological redshift survey that probes a large volume of the Universe with a high galaxy density. MSE is positioned to become a critical hub in the emerging international network of front-line astronomical facilities, with scientific capabilities that naturally complement and extend the scientific power of Gaia, the Large Synoptic Survey Telescope, the Square Kilometer Array, Euclid, WFIRST, the 30m telescopes and many more.

We present the discovery of TOI-197.01, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. TOI-197 (HIP116158) is a bright (V=8.2 mag), spectroscopically classified subgiant which oscillates with an average frequency of about 430 muHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2-minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (2.943+/-0.064 Rsun), mass (1.212 +/- 0.074 Msun) and age (4.9+/-1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (9.17+/-0.33 Rearth) with an orbital period of ~14.3 days, irradiance of 343+/-24 Fearth, moderate mass (60.5 +/- 5.7 Mearth) and density (0.431+/-0.062 gcc). The properties of TOI-197.01 show that the host-star metallicity - planet mass correlation found in sub-Saturns (4-8 Rearth) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ~15%, TOI-197.01 is one of the best characterized Saturn-sized planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology.

The preparation of science objectives of the ESA's PLATO space mission will require the implementation of hare-and-hound exercises relying on the massive generation of representative simulated light-curves. We developed a light-curve simulator named the PLATO Solar-like Light-curve Simulator (PSLS) in order to generate light-curves representative of typical PLATO targets, i.e. showing simultaneously solar-like oscillations, stellar granulation, and magnetic activity. At the same time, PSLS also aims at mimicking in a realistic way the random noise and the systematic errors representative of the PLATO multi-telescope concept. To quantify the instrumental systematic errors, we performed a series of simulations at pixel level that include various relevant sources of perturbations expected for PLATO. From the simulated pixels, we extract the photometry as planned on-board. The simulated light-curves are then corrected for instrumental effects using the instrument Point Spread Functions reconstructed on the basis of a microscanning technique that will be operated during the in-flight calibration phases. These corrected light-curves are then fitted by a parametric model, which we incorporated in PSLS. We show that the instrumental systematic errors dominate the signal only at frequencies below 20muHz and are found to mainly depend on stellar magnitude and on the detector charge transfer inefficiency. To illustrate how realistic our simulator is, we compared its predictions with observations made by Kepler on three typical targets and found a good qualitative agreement with the observations. PSLS reproduces the main properties of expected PLATO light-curves. Its speed of execution and its inclusion of relevant stellar signals as well as sources of noises representative of the PLATO cameras make it an indispensable tool for the scientific preparation of the PLATO mission.

The Maunakea Spectroscopic Explorer (MSE) is a planned 11.25-m aperture facility with a 1.5 square degree field of view that will be fully dedicated to multi-object spectroscopy. A rebirth of the 3.6m Canada-France-Hawaii Telescope on Maunakea, MSE will use 4332 fibers operating at three different resolving powers (R ~ 2500, 6000, 40000) across a wavelength range of 0.36-1.8mum, with dynamical fiber positioning that allows fibers to match the exposure times of individual objects. MSE will enable spectroscopic surveys with unprecedented scale and sensitivity by collecting millions of spectra per year down to limiting magnitudes of g ~ 20-24 mag, with a nominal velocity precision of ~100 m/s in high-resolution mode. This white paper describes science cases for stellar astrophysics and exoplanet science using MSE, including the discovery and atmospheric characterization of exoplanets and substellar objects, stellar physics with star clusters, asteroseismology of solar-like oscillators and opacity-driven pulsators, studies of stellar rotation, activity, and multiplicity, as well as the chemical characterization of AGB and extremely metal-poor stars.

The characterization of exoplanets relies on that of their host star. However, stellar evolution models cannot always be used to derive the mass and radius of individual stars, because many stellar internal parameters are poorly constrained. Here, we use the probability density functions (PDFs) of directly measured parameters to derive the joint PDF of the stellar and planetary mass and radius. Because combining the density and radius of the star is our most reliable way of determining its mass, we find that the stellar (respectively planetary) mass and radius are strongly (respectively moderately) correlated. We then use a generalized Bayesian inference analysis to characterize the possible interiors of 55 Cnc e. We quantify how our ability to constrain the interior improves by accounting for correlation. The information content of the mass-radius correlation is also compared with refractory element abundance constraints. We provide posterior distributions for all interior parameters of interest. Given all available data, we find that the radius of the gaseous envelope is $0.08 \pm 0.05 R_p$. A stronger correlation between the planetary mass and radius (potentially provided by a better estimate of the transit depth) would significantly improve interior characterization and reduce drastically the uncertainty on the gas envelope properties.

Context. The origin of the fossil magnetic fields detected in 5 to 10% of intermediate-mass main sequence stars is still highly debated. Aims. We want to bring observational constraints to a large population of intermediate-mass pre-main sequence (PMS) stars in order to test the theory that convective-dynamo fields generated during the PMS phases of stellar evolution can occasionally relax into fossil fields on the main sequence. Methods. Using distance estimations, photometric measurements, and spectropolarimetric data from HARPSpol and ESPaDOnS of 38 intermediate-mass PMS stars, we determined fundamental stellar parameters (Teff, L and v sin i) and measured surface magnetic field characteristics (including detection limits for non-detections, and longitudinal fields and basic topologies for positive detections). Using PMS evolutionary models, we determined the mass, radius, and internal structure of these stars. We compared different PMS models to check that our determinations were not model-dependant. We then compared the magnetic characteristics of our sample accounting for their stellar parameters and internal structures. Results. We detect magnetic fields in about half of our sample. About 90% of the magnetic stars have outer convective envelopes larger than ~25% of the stellar radii, and heavier than ~2% of the stellar mass. Going to higher mass, we find that the magnetic incidence in intermediate-mass stars drops very quickly, within a time-scale of the order of few times 0.1 Myr. Finally, we propose that intermediate-mass T Tauri stars with large convective envelopes, close to the fully convective limit, have complex fields and that their dipole component strengths may decrease as the sizes of their convective envelopes decrease, similar to lower-mass T Tauri stars.

In a recent paper (Crida et al. 2018, accepted on April 19), we presented a method to derive the mass and radius of a transiting exoplanet and their intrinsic correlation, that we applied to 55 Cnc e. We wrote: "More precise observations of the transit would be very useful in this particular case and would allow to increase significantly the gain on the planetary density precision." Three months later, Bourrier et al. (2018) published new observations of the system. Additionally, Gaia's DR2 was released on April 25, 2018. The purpose of this research note is solely to implement these precise new data in our pipeline to provide an up-to-date result of our model. We find $R_p = 1.947\pm 0.038\,R_\oplus$ and $M_p = 8.59\pm 0.43\,M_\oplus$. We also double the precision on the planetary density ($\rho_p = 1.164\pm 0.062\,\rho_\oplus$), which allows us to refine the estimates for all interior parameters of interest. In particular, we now find that the radius of the gaseous envelope is $0.03\pm 0.02\,R_p$.

We highlight the power of the Gaia DR2 in studying many fine structures of the Hertzsprung-Russell diagram (HRD). Gaia allows us to present many different HRDs, depending in particular on stellar population selections. We do not aim here for completeness in terms of types of stars or stellar evolutionary aspects. Instead, we have chosen several illustrative examples. We describe some of the selections that can be made in Gaia DR2 to highlight the main structures of the Gaia HRDs. We select both field and cluster (open and globular) stars, compare the observations with previous classifications and with stellar evolutionary tracks, and we present variations of the Gaia HRD with age, metallicity, and kinematics. Late stages of stellar evolution such as hot subdwarfs, post-AGB stars, planetary nebulae, and white dwarfs are also analysed, as well as low-mass brown dwarf objects. The Gaia HRDs are unprecedented in both precision and coverage of the various Milky Way stellar populations and stellar evolutionary phases. Many fine structures of the HRDs are presented. The clear split of the white dwarf sequence into hydrogen and helium white dwarfs is presented for the first time in an HRD. The relation between kinematics and the HRD is nicely illustrated. Two different populations in a classical kinematic selection of the halo are unambiguously identified in the HRD. Membership and mean parameters for a selected list of open clusters are provided. They allow drawing very detailed cluster sequences, highlighting fine structures, and providing extremely precise empirical isochrones that will lead to more insight in stellar physics. Gaia DR2 demonstrates the potential of combining precise astrometry and photometry for large samples for studies in stellar evolution and stellar population and opens an entire new area for HRD-based studies.

Chemical element transport processes are among the crucial physical processes needed for precise stellar modelling. Atomic diffusion by gravitational settling nowadays is usually taken into account, and is essential for helioseismic studies. On the other hand, radiative accelerations are rarely accounted for, act differently on the various chemical elements, and can strongly counteract gravity in some stellar mass domains. In this study we aim at determining whether radiative accelerations impact the structure of solar-like oscillating main-sequence stars observed by asteroseismic space missions. We implemented the calculation of radiative accelerations in the CESTAM code using the Single-Valued Parameter method. We built and compared several grids of stellar models including gravitational settling, but some with and others without radiative accelerations. We found that radiative accelerations may not be neglected for stellar masses larger than 1.1~M$_{\odot}$ at solar metallicity. The difference in age due to their inclusion in models can reach 9\% for the more massive stars of our grids. We estimated that the percentage of the PLATO core program stars whose modelling would require radiative accelerations ranges between 33 and 58\% depending on the precision of the seismic data. We conclude that, in the context of Kepler, TESS, and PLATO missions, which provide (or will provide) high quality seismic data, radiative accelerations can have a significant effect when inferring the properties of solar-like oscillators properly. This is particularly important for age inferences. However, the net effect for each individual star results from the competition between atomic diffusion including radiative accelerations and other internal transport processes. This will be investigated in a forthcoming companion paper.

The second Gaia data release (Gaia-DR2) contains, beyond the astrometry, three-band photometry for 1.38 billion sources. We have used these three broad bands to infer stellar effective temperatures, Teff, for all sources brighter than G=17 mag with Teff in the range 3000-10 000 K (161 million sources). Using in addition the parallaxes, we infer the line-of-sight extinction, A_G, and the reddening, E[BP-RP], for 88 million sources. Together with a bolometric correction we derive luminosity and radius for 77 million sources. These quantities as well as their estimated uncertainties are part of Gaia-DR2. Here we describe the procedures by which these quantities were obtained, including the underlying assumptions, comparison with literature estimates, and the limitations of our results. Typical accuracies are of order 324 K (Teff), 0.46 mag (A_G), 0.23 mag (E[BP-RP]), 15% (luminosity), and 10% (radius). Being based on only a small number of observable quantities and limited training data, our results are necessarily subject to some extreme assumptions that can lead to strong systematics in some cases (not included in the aforementioned accuracy estimates). One aspect is the non-negativity contraint of our estimates, in particular extinction. Yet in several regions of parameter space our results show very good performance, for example for red clump stars and solar analogues. Large uncertainties render the extinctions less useful at the individual star level, but they show good performance for ensemble estimates. We identify regimes in which our parameters should and should not be used and we define a "clean" sample. Despite the limitations, this is the largest catalogue of uniformly-inferred stellar parameters to date. More precise and detailed astrophysical parameters based on the full BP/RP spectrophotometry are planned as part of the third Gaia data release.

The orbital motion of non-contact double-lined spectroscopic binaries (SB2), with periods of a few tens of days to several years, holds unique accurate informations on individual stellar masses, that only long-term monitoring can unlock. The combination of radial velocity measurements from high-resolution spectrographs and astrometric measurements from high-precision interferometers allows the derivation of SB2 components masses down to the percent precision. Since 2010, we observed a large sample of SB2 with the SOPHIE spectrograph at the Observatoire de Haute-Provence, aiming at the derivation of orbital elements with sufficient accuracy to obtain masses of components with relative errors as low as 1$\%$ when the astrometric measurements of the Gaia satellite will be taken into account. In this paper we present the results from six years of observations of 14 SB2 systems with periods ranging from 33 to 4185 days. Using the TODMOR algorithm we computed radial velocities from the spectra, and then derived the orbital elements of these binary systems. The minimum masses of the 28 stellar components are then obtained with a sample average accuracy of 1.0$\pm$0.2$\,\%$. Combining the radial velocities with existing interferometric measurements, we derived the masses of the primary and secondary components of HIP 61100, HIP 95995 and HIP 101382 with relative errors for components (A,B) of respectively (2.0, 1.7)$\,\%$, (3.7, 3.7)$\,\%$, and (0.2, 0.1)$\,\%$. Using the Cesam2k stellar evolution code, we could constrain the initial He-abundance, age and metallicity for HIP 61100 and HIP 95995.

Accurate stellar masses are requested in order to improve our understanding of stellar interiors, but they are still rather rare. Fortunately, the forthcoming Gaia Mission will provide astrometric measurements permitting the derivation of the orbital inclinations of nearby binaries which are also observed as double-lined spectroscopic binaries (SB2s) with ground-based telescopes. A programme of radial velocity (RV) measurements was initiated in 2010 with the Sophie spectrograph of the Haute-Provence observatory in order to derive accurate SB2 orbits for a large set of stars. Therefore, combined SB2+astrometric orbits will be derived thanks to Gaia, and masses with errors around 1~\% are expected for both components. The programme includes 70 SB2s, and the accurate SB2 orbits of 24 of them were already derived. In addition, two complementary programmes devoted to southern stars or to late-type dwarf stars were also initiated with the HERMES and the CARMENES spectrographs, respectively. Interferometric measurements were obained with the VLTI/PIONIER for 7 SB2s, and were taken from other sources for 4 others. Currently, combined "visual binary" (VB) +SB2 solutions were derived for 7 binaries, leading to the masses of the components and to the parallaxes. The parallaxes from the Hipparcos 2 catalogue were corrected for orbital motion and compared to our solution, confirming the high quality of Hipparcos 2.

Deciphering the assembly history of the Milky Way is a formidable task, which becomes possible only if one can produce high-resolution chrono-chemo-kinematical maps of the Galaxy. Data from large-scale astrometric and spectroscopic surveys will soon provide us with a well-defined view of the current chemo-kinematical structure of the Milky Way, but will only enable a blurred view on the temporal sequence that led to the present-day Galaxy. As demonstrated by the (ongoing) exploitation of data from the pioneering photometric missions CoRoT, Kepler, and K2, asteroseismology provides the way forward: solar-like oscillating giants are excellent evolutionary clocks thanks to the availability of seismic constraints on their mass and to the tight age-initial-mass relation they adhere to. In this paper we identify five key outstanding questions relating to the formation and evolution of the Milky Way that will need precise and accurate ages for large samples of stars to be addressed, and we identify the requirements in terms of number of targets and the precision on the stellar properties that are needed to tackle such questions. By quantifying the asteroseismic yields expected from PLATO for red-giant stars, we demonstrate that these requirements are within the capabilities of the current instrument design, provided that observations are sufficiently long to identify the evolutionary state and allow robust and precise determination of acoustic-mode frequencies. This will allow us to harvest data of sufficient quality to reach a 10% precision in age. This is a fundamental pre-requisite to then reach the more ambitious goal of a similar level of accuracy, which will only be possible if we have to hand a careful appraisal of systematic uncertainties on age deriving from our limited understanding of stellar physics, a goal which conveniently falls within the main aims of PLATO's core science.

Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, that involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity ($PL$), period-Wesenheit ($PW$) relations for classical and Type II Cepheids and infrared $PL$, $PL$-metallicity ($PLZ$) and optical luminosity-metallicity ($M_V$-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS. The new relations were computed using multi-band ($V,I,J,K_{\mathrm{s}},W_{1}$) photometry and spectroscopic metal abundances available in the literature, and applying three alternative approaches: (i) by linear least squares fitting the absolute magnitudes inferred from direct transformation of the TGAS parallaxes, (ii) by adopting astrometric-based luminosities, and (iii) using a Bayesian fitting approach. TGAS parallaxes bring a significant added value to the previous Hipparcos estimates. The relations presented in this paper represent first Gaia-calibrated relations and form a "work-in-progress" milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia's Data Release 2 (DR2) in 2018.

Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.

We use asteroseismic data from the Kepler satellite to determine fundamental stellar properties of the 66 main-sequence targets observed for at least one full year by the mission. We distributed tens of individual oscillation frequencies extracted from the time series of each star among seven modelling teams who applied different methods to determine radii, masses, and ages for all stars in the sample. Comparisons among the different results reveal a good level of agreement in all stellar properties, which is remarkable considering the variety of codes, input physics and analysis methods employed by the different teams. Average uncertainties are of the order of $\sim$2\% in radius, $\sim$4\% in mass, and $\sim$10\% in age, making this the best-characterised sample of main-sequence stars available to date. Our predicted initial abundances and mixing-length parameters are checked against inferences from chemical enrichment laws $\Delta Y / \Delta Z$ and predictions from 3D atmospheric simulations. We test the accuracy of the determined stellar properties by comparing them to the Sun, angular diameter measurements, Gaia parallaxes, and binary evolution, finding excellent agreement in all cases and further confirming the robustness of asteroseismically-determined physical parameters of stars when individual frequencies of oscillation are available. Baptised as the Kepler dwarfs LEGACY sample, these stars are the solar-like oscillators with the best asteroseismic properties available for at least another decade. All data used in this analysis and the resulting stellar parameters are made publicly available for the community.

The advent of space-based missions like $Kepler$ has revolutionized the study of solar-type stars, particularly through the measurement and modeling of their resonant modes of oscillation. Here we analyze a sample of 66 $Kepler$ main-sequence stars showing solar-like oscillations as part of the $Kepler$ seismic LEGACY project. We use $Kepler$ short-cadence data, of which each star has at least 12 months, to create frequency power spectra optimized for asteroseismology. For each star we identify its modes of oscillation and extract parameters such as frequency, amplitude, and line width using a Bayesian Markov chain Monte Carlo `peak-bagging' approach. We report the extracted mode parameters for all 66 stars, as well as derived quantities such as frequency difference ratios, the large and small separations $\Delta\nu$ and $\delta\nu_{02}$; the behavior of line widths with frequency and line widths at $\nu_{\rm max}$ with $T_{\rm eff}$, for which we derive parametrizations; and behavior of mode visibilities. These average properties can be applied in future peak-bagging exercises to better constrain the parameters of the stellar oscillation spectra. The frequencies and frequency ratios can tightly constrain the fundamental parameters of these solar-type stars, and mode line widths and amplitudes can test models of mode damping and excitation.

Context: Detailed oscillation spectra comprising individual frequencies for numerous solar-type stars and red giants are or will become available. These data can lead to a precise characterisation of stars. Aims: Our goal is to test and compare different methods for obtaining stellar properties from oscillation frequencies and spectroscopic constraints, in order to evaluate their accuracy and the reliability of the error bars. Methods: In the context of the SpaceInn network, we carried out a hare-and-hounds exercise in which one group produced "observed" oscillation spectra for 10 artificial solar-type stars, and various groups characterised these stars using either forward modelling or acoustic glitch signatures. Results: Results based on the forward modelling approach were accurate to 1.5 % (radius), 3.9 % (mass), 23 % (age), 1.5 % (surface gravity), and 1.8 % (mean density). For the two 1 Msun stellar targets, the accuracy on the age is better than 10 % thereby satisfying PLATO 2.0 requirements. The average accuracies for the acoustic radii of the base of the convection zone, the He II ionisation, and the Gamma_1 peak were 17 %, 2.4 %, and 1.9 %, respectively. Glitch fitting analysis seemed to be affected by aliasing problems for some of the targets. Conclusions: Forward modelling is the most accurate approach, but needs to be complemented by model-independent results from, e.g., glitch analysis. Furthermore, global optimisation algorithms provide more robust error bars.

In anticipation of the Gaia astrometric mission, a large sample of spectroscopic binaries has been observed since 2010 with the SOPHIE spectrograph at the Haute--Provence Observatory. Our aim is to derive the orbital elements of double-lined spectroscopic binaries (SB2s) with an accuracy sufficient to finally obtain the masses of the components with relative errors as small as 1 % when the astrometric measurements of Gaia are taken into account. In this paper we present the results from five years of observations of 10 SB2 systems with periods ranging from 37 to 881 days. Using the TODMOR algorithm we computed radial velocities from the spectra, and then derived the orbital elements of these binary systems. The minimum masses of the components are then obtained with an accuracy better than 1.2 % for the ten binaries. Combining the radial velocities with existing interferometric measurements, we derived the masses of the primary and secondary components of HIP 87895 with an accuracy of 0.98 % and 1.2 % respectively.

Our poor understanding of the boundaries of convective cores generates large uncertainties on the extent of these cores and thus on stellar ages. Our aim is to use asteroseismology to consistently measure the extent of convective cores in a sample of main-sequence stars whose masses lie around the mass-limit for having a convective core. We first test and validate a seismic diagnostic that was proposed to probe in a model-dependent way the extent of convective cores using the so-called $r_{010}$ ratios, which are built with $l=0$ and $l=1$ modes. We apply this procedure to 24 low-mass stars chosen among Kepler targets to optimize the efficiency of this diagnostic. For this purpose, we compute grids of stellar models with both the CESAM2k and MESA evolution codes, where the extensions of convective cores are modeled either by an instantaneous mixing or as a diffusion process. Among the selected targets, we are able to unambiguously detect convective cores in eight stars and we obtain seismic measurements of the extent of the mixed core in these targets with a good agreement between the CESAM2k and MESA codes. By performing optimizations using the Levenberg-Marquardt algorithm, we then obtain estimates of the amount of extra-mixing beyond the core that is required in CESAM2k to reproduce seismic observations for these eight stars and we show that this can be used to propose a calibration of this quantity. This calibration depends on the prescription chosen for the extra-mixing, but we find that it should be valid also for the code MESA, provided the same prescription is used. This study constitutes a first step towards the calibration of the extension of convective cores in low-mass stars, which will help reduce the uncertainties on the ages of these stars.

In anticipation of the Gaia astrometric mission, a sample of spectroscopic binaries is being observed since 2010 with the Sophie spectrograph at the Haute--Provence Observatory. Our aim is to derive the orbital elements of double-lined spectroscopic binaries (SB2s) with an accuracy sufficient to finally obtain the masses of the components with relative errors as small as 1 % when combined with Gaia astrometric measurements. In order to validate the masses derived from Gaia, interferometric observations are obtained for three SB2s in our sample with F-K components: HIP 14157, HIP 20601 and HIP 117186. The masses of the six stellar components are derived. Due to its edge-on orientation, HIP 14157 is probably an eclipsing binary. We note that almost all the derived masses are a few percent larger than the expectations from the standard spectral-type-mass calibration and mass-luminosity relation. Our calculation also leads to accurate parallaxes for the three binaries, and the Hipparcos parallaxes are confirmed.

The recent detection of a convective core in a main-sequence solar-type star is used here to test particular models of dark matter (DM) particles, those with masses and scattering cross sections in the range of interest for the DM interpretation of the positive results in several DM direct detection experiments. If DM particles do not effectively self-annihilate after accumulating inside low-mass stars (e.g. in the asymmetric DM scenario) their conduction provides an efficient mechanism of energy transport in the stellar core. For main-sequence stars with masses between 1.1 and 1.3 Msun, this mechanism may lead to the suppression of the inner convective region expected to be present in standard stellar evolution theory. The asteroseismic analysis of the acoustic oscillations of a star can prove the presence/absence of such a convective core, as it was demonstrated for the first time with the Kepler field main-sequence solar-like pulsator, KIC 2009505. Studying this star we found that the asymmetric DM interpretation of the results in the CoGeNT experiment is incompatible with the confirmed presence of a small convective core in KIC 2009505.

The detection of oscillations with a mixed character in subgiants and red giants allows us to probe the physical conditions in their cores. With these mixed modes, we aim at determining seismic markers of stellar evolution. Kepler asteroseismic data were selected to map various evolutionary stages and stellar masses. Seismic evolutionary tracks were then drawn with the combination of the frequency and period spacings. We measured the asymptotic period spacing for more than 1170 stars at various evolutionary stages. This allows us to monitor stellar evolution from the main sequence to the asymptotic giant branch and draw seismic evolutionary tracks. We present clear quantified asteroseismic definitions that characterize the change in the evolutionary stages, in particular the transition from the subgiant stage to the early red giant branch, and the end of the horizontal branch.The seismic information is so precise that clear conclusions can be drawn independently of evolution models. The quantitative seismic information can now be used for stellar modeling, especially for studying the energy transport in the helium-burning core or for specifying the inner properties of stars entering the red or asymptotic giant branches. Modeling will also allow us to study stars that are identified to be in the helium-subflash stage, high-mass stars either arriving or quitting the secondary clump, or stars that could be in the blue-loop stage.

Among the various methods used to age-date stars, methods based on stellar model predictions are widely used, for nearly all kind of stars in large ranges of masses, chemical compositions and evolutionary stages. The precision and accuracy on the age determination depend on both the precision and number of observational constraints, and on our ability to correctly describe the stellar interior and evolution. The imperfect input physics of stellar models as well as the uncertainties on the initial chemical composition of stars are responsible for uncertainties in the age determination. We present an overview of the calculation of stellar models and discuss the impact on age of their numerous inputs.

Accurate and precise stellar ages are best determined for stars which are strongly observationally constrained, that is which are intrinsically oscillating. We review here the seismic diagnostics which are sensitive to stellar ages and provide some illustrating examples of seismically age-dated stars.

Recently the number of main-sequence and subgiant stars exhibiting solar-like oscillations that are resolved into individual mode frequencies has increased dramatically. While only a few such data sets were available for detailed modeling just a decade ago, the Kepler mission has produced suitable observations for hundreds of new targets. This rapid expansion in observational capacity has been accompanied by a shift in analysis and modeling strategies to yield uniform sets of derived stellar properties more quickly and easily. We use previously published asteroseismic and spectroscopic data sets to provide a uniform analysis of 42 solar-type Kepler targets from the Asteroseismic Modeling Portal (AMP). We find that fitting the individual frequencies typically doubles the precision of the asteroseismic radius, mass and age compared to grid-based modeling of the global oscillation properties, and improves the precision of the radius and mass by about a factor of three over empirical scaling relations. We demonstrate the utility of the derived properties with several applications.

In anticipation of the Gaia astrometric mission, a large sample of spectroscopic binaries is being observed since 2010 with the Sophie spectrograph at the Haute--Provence Observatory. Our aim is to derive the orbital elements of double-lined spectroscopic binaries (SB2s) with an accuracy sufficient to finally obtain the masses of the components with relative errors as small as 1% when the astrometric measurements of Gaia are taken into account. Simultaneously, the luminosities of the components in the Gaia photometric band G will also be obtained. Our observation program started with 200 SBs, including 152 systems that were only known as single-lined. Thanks to the high efficiency of the Sophie spectrograph, an additional component was found for 25 SBs. After rejection of 5 multiple systems, 20 new SB2s were retained, including 8 binaries with evolved primary, and their mass ratios were derived. Our final sample contains 68 SB2s, including 2 late-type giants and 10 other evolved stars.

In the context of CoRoT, Kepler, Gaia, TESS, and PLATO, precise and accurate stellar ages, masses and radii are of paramount importance. They are crucial to constrain scenarii of planetary formation and evolution.We aim at quantifying how detailed stellar modeling improves the accuracy and precision on age and mass of individual stars. We adopt a multifaceted approach where we examine how the number of observational constraints as well as the uncertainties on observations and on model input physics impact the age-dating and weighing. We modelled the exoplanet host-star HD52265, a MS, solar-like oscillator observed by CoRoT. We considered different sets of observational constraints (HR data, metallicity, seismic constraints). For each case, we determined the age, mass, and properties of HD52265 inferred from models, and quantified the impact of the models inputs. Our seismic analysis provides an age A=2.10-2.54 Gyr, a mass M=1.14-1.32 Msun, and a radius R=1.30-1.34 Rsun, which corresponds to uncertainties of 10, 7, and 1.5% respectively. Our seismic study provides constraints on surface convection, through the mixing-length found to be 12-15% smaller than the solar one. Because of helium-mass degeneracy, the initial He abundance is determined modulo the mass. The seismic mass of the exoplanet is found to be Mp sin i=1.17-1.26 MJup, much more precise than what can be derived by HR diagram inversion. We demonstrate that asteroseismology allows to improve the age accuracy compared to other methods. We emphasize that the knowledge of the mean properties of oscillations -as the large frequency separation- is not enough for deriving accurate ages. We need precise individual frequencies to narrow the age scatter due to model uncertainties. This strengthen the case for precise classical stellar parameters and frequencies as will be obtained by Gaia and PLATO.

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

Context. The object HD 43587Aa is a G0V star observed during the 145-day LRa03 run of the COnvection, ROtation and planetary Transits space mission (CoRoT), for which complementary High Accuracy Radial velocity Planet Searcher (HARPS) spectra with S/N>300 were also obtained. Its visual magnitude is 5.71, and its effective temperature is close to 5950 K. It has a known companion in a highly eccentric orbit and is also coupled with two more distant companions. Aims. We undertake a preliminary investigation of the internal structure of HD 43587Aa. Methods. We carried out a seismic analysis of the star, using maximum likelihood estimators and Markov Chain Monte Carlo methods. Results. We established the first table of the eigenmode frequencies, widths, and heights for HD 43587Aa. The star appears to have a mass and a radius slightly larger than the Sun, and is slightly older (5.6 Gyr). Two scenarios are suggested for the geometry of the star: either its inclination angle is very low, or the rotation velocity of the star is very low. Conclusions. A more detailed study of the rotation and of the magnetic and chromospheric activity for this star is needed, and will be the subject of a further study. New high resolution spectrometric observations should be performed for at least several months in duration.

High precision photometry as performed by the CoRoT and Kepler satellites on-board instruments has allowed to detect stellar oscillations over the whole HR diagram. Oscillation frequencies are closely related to stellar interior properties via the density and sound speed profiles, themselves tightly linked with the mass and evolutionary state of stars. Seismic diagnostics performed on stellar internal structure models allow to infer the age and mass of oscillating stars. The accuracy and precision of the age determination depend both on the goodness of the observational parameters (seismic and classical) and on our ability to model a given star properly. They therefore suffer from any misunderstanding of the physical processes at work inside stars (as microscopic physics, transport processes...). In this paper, we recall some seismic diagnostics of stellar age and we illustrate their efficiency in age-dating the CoRoT target HD 52265.

The Gaia satellite will survey the entire celestial sphere down to 20th magnitude, obtaining astrometry, photometry, and low resolution spectrophotometry on one billion astronomical sources, plus radial velocities for over one hundred million stars. Its main objective is to take a census of the stellar content of our Galaxy, with the goal of revealing its formation and evolution. Gaia's unique feature is the measurement of parallaxes and proper motions with hitherto unparalleled accuracy for many objects. As a survey, the physical properties of most of these objects are unknown. Here we describe the data analysis system put together by the Gaia consortium to classify these objects and to infer their astrophysical properties using the satellite's data. This system covers single stars, (unresolved) binary stars, quasars, and galaxies, all covering a wide parameter space. Multiple methods are used for many types of stars, producing multiple results for the end user according to different models and assumptions. Prior to its application to real Gaia data the accuracy of these methods cannot be assessed definitively. But as an example of the current performance, we can attain internal accuracies (RMS residuals) on F,G,K,M dwarfs and giants at G=15 (V=15-17) for a wide range of metallicites and interstellar extinctions of around 100K in effective temperature (Teff), 0.1mag in extinction (A0), 0.2dex in metallicity ([Fe/H]), and 0.25dex in surface gravity (logg). The accuracy is a strong function of the parameters themselves, varying by a factor of more than two up or down over this parameter range. After its launch in November 2013, Gaia will nominally observe for five years, during which the system we describe will continue to evolve in light of experience with the real data.

Using asteroseismic data and stellar evolution models we make the first detection of a convective core in a Kepler field main-sequence star, putting a stringent constraint on the total size of the mixed zone and showing that extra mixing beyond the formal convective boundary exists. In a slightly less massive target the presence of a convective core cannot be conclusively discarded, and thus its remaining main-sequence life time is uncertain. Our results reveal that best-fit models found solely by matching individual frequencies of oscillations corrected for surface effects do not always properly reproduce frequency combinations. Moreover, slightly different criteria to define what the best-fit model is can lead to solutions with similar global properties but very different interior structures. We argue that the use of frequency ratios is a more reliable way to obtain accurate stellar parameters, and show that our analysis in field main-sequence stars can yield an overall precision of 1.5%, 4%, and 10% in radius, mass and age, respectively. We compare our results with those obtained from global oscillation properties, and discuss the possible sources of uncertainties in asteroseismic stellar modeling where further studies are still needed.

Asteroseismology with the space-borne missions CoRoT and Kepler provides a powerful mean of testing the modeling of transport processes in stars. Rotational splittings are currently measured for a large number of red giant stars and can provide stringent constraints on the rotation profiles. The aim of this paper is to obtain a theoretical framework for understanding the properties of the observed rotational splittings of red giant stars with slowly rotating cores. This allows us to establish appropriate seismic diagnostics for rotation of these evolved stars. Rotational splittings for stochastically excited dipolar modes are computed adopting a first-order perturbative approach for two $1.3 M_\odot$ benchmark models assuming slowly rotating cores. For red giant stars with slowly rotating cores, we show that the variation of the rotational splittings of $\ell=1$ modes with frequency depends only on the large frequency separation, the g-mode period spacing, and the ratio of the average envelope to core rotation rates (${\cal R}$). This leds us to propose a way to infer directly ${\cal R}$ from the observations. This method is validated using the Kepler red giant star KIC 5356201. Finally, we provide a theoretical support for the use of a Lorentzian profile to measure the observed splittings for red giant stars.

Rotational splittings are currently measured for several main sequence stars and a large number of red giants with the space mission Kepler. This will provide stringent constraints on rotation profiles. Our aim is to obtain seismic constraints on the internal transport and surface loss of angular momentum of oscillating solar-like stars. To this end, we study the evolution of rotational splittings from the pre-main sequence to the red-giant branch for stochastically excited oscillation modes. We modified the evolutionary code CESAM2K to take rotationally induced transport in radiative zones into account. Linear rotational splittings were computed for a sequence of $1.3 M_{\odot}$ models. Rotation profiles were derived from our evolutionary models and eigenfunctions from linear adiabatic oscillation calculations. We find that transport by meridional circulation and shear turbulence yields far too high a core rotation rate for red-giant models compared with recent seismic observations. We discuss several uncertainties in the physical description of stars that could have an impact on the rotation profiles. For instance, we find that the Goldreich-Schubert-Fricke instability does not extract enough angular momentum from the core to account for the discrepancy. In contrast, an increase of the horizontal turbulent viscosity by 2 orders of magnitude is able to significantly decrease the central rotation rate on the red-giant branch. Our results indicate that it is possible that the prescription for the horizontal turbulent viscosity largely underestimates its actual value or else a mechanism not included in current stellar models of low mass stars is needed to slow down the rotation in the radiative core of red-giant stars.

We present a new method to derive orbital elements of double-lined spectroscopic binaries (SB2). The aim is to have accurate orbital parameters of a selection of SB2 in order to prepare the exploitation of astrometric Gaia observations. Combined with our results, they should allow one to measure the mass of each star with a precision of better than 1%. The new method presented here consists of using the spectra at all epochs simultaneously to derive the orbital elements without templates. It is based on a Markov chain including a new method for disentangling the spectra.

Aims: We aim at characterizing the inward transition from convective to radiative energy transport at the base of the convective envelope of the solar-like oscillator HD 52265 recently observed by the CoRoT satellite. Methods: We investigated the origin of one specific feature found in the HD 52265 frequency spectrum. We modelled the star to derive the internal structure and the oscillation frequencies that best match the observations and used a seismic indicator sensitive to the properties of the base of the envelope convection zone. Results: The seismic indicators clearly reveal that to best represent the observed properties of HD 52265, models must include penetrative convection below the outer convective envelope. The penetrative distance is estimated to be $\sim0.95 H_P$, which corresponds to an extent over a distance representing 6.0 per cents of the total stellar radius, significantly larger than what is found for the Sun. The inner boundary of the extra-mixing region is found at $0.800\pm0.004 R$ where $R=1.3 R_\odot$ is the stellar radius. Conclusions: These results contribute to the tachocline characterization in stars other than the Sun.

The G6 giant HR\,2582 (HD\,50890) was observed by CoRoT for approximately 55 days. Mode frequencies are extracted from the observed Fourier spectrum of the light curve. Numerical stellar models are then computed to determine the characteristics of the star (mass, age, etc...) from the comparison with observational constraints. We provide evidence for the presence of solar-like oscillations at low frequency, between 10 and 20\,$\mu$Hz, with a regular spacing of $(1.7\pm0.1)\mu$Hz between consecutive radial orders. Only radial modes are clearly visible. From the models compatible with the observational constraints used here, We find that HR\,2582 (HD\,50890) is a massive star with a mass in the range (3--\,5\,$M_{\odot}$), clearly above the red clump. It oscillates with rather low radial order ($n$ = 5\,--\,12) modes. Its evolutionary stage cannot be determined with precision: the star could be on the ascending red giant branch (hydrogen shell burning) with an age of approximately 155 Myr or in a later phase (helium burning). In order to obtain a reasonable helium amount, the metallicity of the star must be quite subsolar. Our best models are obtained with a mixing length significantly smaller than that obtained for the Sun with the same physical description (except overshoot). The amount of core overshoot during the main-sequence phase is found to be mild, of the order of 0.1\,$H_{\rm p}$.

The characterization of the growing number of newly discovered exoplanets ---nature, internal structure, formation and evolution--- strongly relies on the properties of their host-star, i.e. its mass, radius and age. These latter can be inferred from stellar evolution models constrained by the observed global parameters of the host-star --- effective temperature, photospheric chemical composition, surface gravity and/or luminosity--- and by its mean density inferred from the transit analysis. Additional constraints for the models can be provided by asteroseismic observations of the host-star. The precision and accuracy on the age, mass and radius not only depend on the quality and number of available observations of the host-star but also on our ability to model it properly. Stellar models are still based on a number of approximations, they rely on physical inputs and data that can be uncertain and do not treat correctly all the physical processes that can be at work inside a star. We focus here on the determination of the age of HD 17156, an oscillating star hosting an exoplanet. We examine the dispersion of the age values obtained by different methods ---empirical or model-dependent--- and the different sources of errors ---observational or theoretical--- that intervene in the age determination based on stellar models.

We review some major open issues in the current modelling of low and intermediate mass, main sequence stars based on seismological studies. The solar case was discussed in a companion paper, here several issues specific to other stars than the Sun are illustrated with a few stars observed with CoRoT and expectations from Kepler data.

We review some major, open issues in the current modelling of low and intermediate mass, main sequence stars based on seismological studies. In the present paper, the solar case is discussed together with current problems that are common to the Sun and stars with a structure similar to that of the Sun. Several additional issues specific to main sequence stars other than the Sun are reviewed and illustrated with a few stars observed with CoRoT in a companion paper.

Theta^2 Tauri is a detached and single-lined interferometric-spectroscopic binary as well as the most massive binary system of the Hyades cluster. The system revolves in an eccentric orbit with a periodicity of 140.7 days. The secondary has a similar temperature but is less evolved and fainter than the primary. It is also rotating more rapidly. Since the composite spectra are heavily blended, the direct extraction of radial velocities over the orbit of component B was hitherto unsuccessful. Using high-resolution spectroscopic data recently obtained with the Elodie (OHP, France) and Hermes (ORM, La Palma, Spain) spectrographs, and applying a spectra disentangling algorithm to three independent data sets including spectra from the Oak Ridge Observatory (USA), we derived an improved spectroscopic orbit and refined the solution by performing a combined astrometric-spectroscopic analysis based on the new spectroscopy and the long-baseline data from the Mark III optical interferometer. As a result, the velocity amplitude of the fainter component is obtained in a direct and objective way. Major progress based on this new determination includes an improved computation of the orbital parallax. Our mass ratio is in good agreement with the older estimates of Peterson et al. (1991, 1993), but the mass of the primary is 15-25% higher than the more recent estimates by Torres et al. (1997) and Armstrong et al. (2006). Due to the strategic position of the components in the turnoff region of the cluster, these new determinations imply stricter constraints for the age and the metallicity of the Hyades cluster. The location of component B can be explained by current evolutionary models, but the location of the more evolved component A is not trivially explained and requires a detailed abundance analysis of its disentangled spectrum.

We present a brief overview of the history of attempts to obtain a clear detection of solar-like oscillations in cluster stars, and discuss the results on the first clear detection, which was made by the Kepler Asteroseismic Science Consortium (KASC) Working Group 2.

A 5-night asteroseismic observation of the F8V star HD 203608 was conducted in August 2006 with HARPS, followed by an analysis of the data, and a preliminary modeling of the star (Mosser et al. 2008). The stellar parameters were significantly constrained, but the behavior of one of the seismic indexes (the small spacing d01) could not be fitted with the observed one, even with the best considered models. We study the possibility of improving the agreement between models and observations by changing the physical properties of the inner parts of the star (to which d01 is sensitive). We show that, in spite of its low mass, it is possible to produce models of HD 203608 with a convective core. No such model was considered in the preliminary modeling. In practice, we obtain these models here by assuming some extra mixing at the edge of the early convective core. We optimize the model parameters using the Levenberg-Marquardt algorithm. The agreement between the new best model with a convective core and the observations is much better than for the models without. All the observational parameters are fitted within 1-sigma observational error bars. This is the first observational evidence of a convective core in an old and low-mass star such as HD 203608. In standard models of low-mass stars, the core withdraws shortly after the ZAMS. The survival of the core until the present age of HD 203608 provides very strong constraints on the size of the mixed zone associated to the convective core. Using overshooting as a proxy to model the processes of transport at the edge of the core, we find that to reproduce both global and seismic observations, we must have alpha_ov = 0.17 +/- 0.03 Hp for HD 203608. We revisit the process of the extension of the core lifetime due to overshooting in the particular case of HD 203608.

We have measured solar-like oscillations in red giants using time-series photometry from the first 34 days of science operations of the Kepler Mission. The light curves, obtained with 30-minute sampling, reveal clear oscillations in a large sample of G and K giants, extending in luminosity from the red clump down to the bottom of the giant branch. We confirm a strong correlation between the large separation of the oscillations (Delta nu) and the frequency of maximum power (nu_max). We focus on a sample of 50 low-luminosity stars (nu_max > 100 muHz, L <~ 30 L_sun) having high signal-to-noise ratios and showing the unambiguous signature of solar-like oscillations. These are H-shell-burning stars, whose oscillations should be valuable for testing models of stellar evolution and for constraining the star-formation rate in the local disk. We use a new technique to compare stars on a single echelle diagram by scaling their frequencies and find well-defined ridges corresponding to radial and non-radial oscillations, including clear evidence for modes with angular degree l=3. Measuring the small separation between l=0 and l=2 allows us to plot the so-called C-D diagram of delta nu_02 versus Delta nu. The small separation delta nu_01 of l=1 from the midpoint of adjacent l=0 modes is negative, contrary to the Sun and solar-type stars. The ridge for l=1 is notably broadened, which we attribute to mixed modes, confirming theoretical predictions for low-luminosity giants. Overall, the results demonstrate the tremendous potential of Kepler data for asteroseismology of red giants.

We present preliminary asteroseismic results from Kepler on three G-type stars. The observations, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation may be clearly distinguished in each star. We discuss the appearance of the oscillation spectra, use the frequencies and frequency separations to provide first results on the radii, masses and ages of the stars, and comment in the light of these results on prospects for inference on other solar-type stars that Kepler will observe.

Asteroseismology of stars in clusters has been a long-sought goal because the assumption of a common age, distance and initial chemical composition allows strong tests of the theory of stellar evolution. We report results from the first 34 days of science data from the Kepler Mission for the open cluster NGC 6819 -- one of four clusters in the field of view. We obtain the first clear detections of solar-like oscillations in the cluster red giants and are able to measure the large frequency separation and the frequency of maximum oscillation power. We find that the asteroseismic parameters allow us to test cluster-membership of the stars, and even with the limited seismic data in hand, we can already identify four possible non-members despite their having a better than 80% membership probability from radial velocity measurements. We are also able to determine the oscillation amplitudes for stars that span about two orders of magnitude in luminosity and find good agreement with the prediction that oscillation amplitudes scale as the luminosity to the power of 0.7. These early results demonstrate the unique potential of asteroseismology of the stellar clusters observed by Kepler.

Saio et al. (2006) have shown that the presence of an intermediate convective zone (ICZ) in post-main sequence models could prevent the propagation of g-modes in the radiative interior and hence avoid the corresponding radiative damping. The development of such a convective region highly depends on the structure of the star in the mu-gradient region surrounding the convective core during the main sequence phase. In particular,the development of this ICZ depends on physical processes such as mass loss, overshooting (Chiosi & Maeder 1986, Chiosi et al. 1992, see also Godart et al., these proceedings) and convective instability criterion (Schwarzschild's or Ledoux's criteria). In this paper we study the consequences of adopting the Ledoux's criterion on the evolution of the convective regions in massive stars (15 and 20 Msun), and on the pulsation spectrum of these new B-type variables (also called SPBsg).

Asteroseismology provides powerful means to probe stellar interiors. The oscillations frequencies are closely related to stellar interior properties via the density and sound speed profiles. Since these are tightly linked with the mass and evolutionary state, we can expect to determine the age and mass of a star from the comparison of its oscillation spectrum with predictions of stellar models. Such a comparison suffers both from the problems we face when modeling a particular star (as the uncertainties on global parameters and chemical composition) and from our misunderstanding of processes at work in stellar interiors (as the transport processes that may lead to core mixing and affect the model ages). For stars where observations have provided precise and numerous oscillation frequencies together with accurate global parameters and additional information (as the radius or the mass if the star is in a binary system, the interferometric radius or the mean density if the star is an exoplanet host), we can also expect to better constrain the physical description of the stellar structure and to get a more reliable age estimation. After a survey of stellar pulsations, we present some seismic diagnostics that can be used to infer the age of a star as well as their limitations. We then illustrate the ability of asteroseismology to scrutinize stellar interiors on the basis of a few exemples. In the years to come, extended very precise asteroseismic observations are expected, in photometry or in spectroscopy, from ground-based (HARPS, CORALIE, ELODIE, UVES, UCLES, SIAMOIS, SONG) or spatial devices (MOST, CoRoT, WIRE, Kepler, PLATO). This will considerably enlarge the sample of stars eligible to asteroseismic age determination and should allow to estimate the age of individual stars with a 10-20% accuracy.

We present grids of stellar models and their associated oscillation frequencies that have been used by the CoRoT Seismology Working Group during the scientific preparation of the CoRoT mission. The stellar models have been calculated with the CESAM stellar internal structure and evolution code while the oscillation frequencies have been obtained from the CESAM models by means of the ADIPLS adiabatic oscillation programme. The grids cover a range of masses, chemical compositions and evolutionary stages corresponding to those of the CoRoT primary targets. The stellar models and oscillation frequencies are available on line through the Evolution and Seismic Tools Activity (ESTA) web site.

The forthcoming data expected from space missions such as CoRoT require the capacity of the available tools to provide accurate models whose numerical precision is well above the expected observational errors. In order to secure that these tools meet the specifications, a team has been established to test and, when necessary, to improve the codes available in the community. The CoRoT evolution and seismic tool activity (ESTA) has been set up with this mission. Several groups have been involved. The present paper describes the motivation and the organisation of this activity, providing the context and the basis for the presentation of the results that have been achieved so far. This is not a finished task as future even better data will continue to demand more precise and complete tools for asteroseismology.

This contribution is not about the quality of the agreement between stellar models computed by CESAM and CLES codes, but more interesting, on what ESTA-Task~1 run has taught us about these codes and about the input physics they use. We also quantify the effects of different implementations of the same physics on the seismic properties of the stellar models, that in fact is the main aim of ESTA experiments.

The understanding and modeling of the structure and evolution of stars is based on statistical physics as well as on hydrodynamics. Today, a precise identification and proper description of the physical processes at work in stellar interiors are still lacking (one key point being that of transport processes) while the comparison of real stars to model predictions, which implies conversions from the theoretical space to the observational one, suffers from uncertainties in model atmospheres. That results in uncertainties on the prediction of stellar properties needed for galactic studies or cosmology (as stellar ages and masses). In the next decade, progress is expected from the theoretical, experimental and observational sides. I illustrate some of the problems we are faced with when modeling stars and the possible tracks towards their solutions. I discuss how future observational ground-based or spatial programs (in particular those dedicated to micro-arc-second astrometry, asteroseismology and interferometry) will provide precise determinations of the stellar parameters and contribute to a better knowledge of stellar interiors and atmospheres in a wide range of stellar masses, chemical compositions and evolution stages.

The Cesam code is a consistent set of programs and routines which perform calculations of 1D quasi-hydrostatic stellar evolution including microscopic diffusion of chemical species and diffusion of angular momentum. The solution of the quasi-static equilibrium is performed by a collocation method based on piecewise polynomials approximations projected on a B-spline basis; that allows stable and robust calculations, and the exact restitution of the solution, not only at grid points, even for the discontinuous variables. Other advantages are the monitoring by only one parameter of the accuracy and its improvement by super-convergence. An automatic mesh refinement has been designed for adjusting the localisations of grid points according to the changes of unknowns. For standard models, the evolution of the chemical composition is solved by stiffly stable schemes of orders up to four; in the convection zones mixing and evolution of chemical are simultaneous. The solution of the diffusion equation employs the Galerkin finite elements scheme; the mixing of chemicals is then performed by a strong turbulent diffusion. A precise restoration of the atmosphere is allowed for.

We compare stellar models produced by different stellar evolution codes for the CoRoT/ESTA project, comparing their global quantities, their physical structure, and their oscillation properties. We discuss the differences between models and identify the underlying reasons for these differences. The stellar models are representative of potential CoRoT targets. Overall we find very good agreement between the five different codes, but with some significant deviations. We find noticeable discrepancies (though still at the per cent level) that result from the handling of the equation of state, of the opacities and of the convective boundaries. The results of our work will be helpful in interpreting future asteroseismology results from CoRoT.

In order to make astroseismology a powerful tool to explore stellar interiors, different numerical codes should give the same oscillation frequencies for the same input physics. This work is devoted to test, compare and, if needed, optimize the seismic codes used to calculate the eigenfrequencies to be finally compared with observations. The oscillation codes of nine research groups in the field have been used in this study. The same physics has been imposed for all the codes in order to isolate the non-physical dependence of any possible difference. Two equilibrium models with different grids, 2172 and 4042 mesh points, have been used, and the latter model includes an explicit modelling of semiconvection just outside the convective core. Comparing the results for these two models illustrates the effect of the number of mesh points and their distribution in particularly critical parts of the model, such as the steep composition gradient outside the convective core. A comprehensive study of the frequency differences found for the different codes is given as well. These differences are mainly due to the use of different numerical integration schemes. The use of a second-order integration scheme plus a Richardson extrapolation provides similar results to a fourth-order integration scheme. The proper numerical description of the Brunt-Vaisala frequency in the equilibrium model is also critical for some modes. An unexpected result of this study is the high sensitivity of the frequency differences to the inconsistent use of values of the gravitational constant (G) in the oscillation codes, within the range of the experimentally determined ones, which differ from the value used to compute the equilibrium model.

Context: In a recent work, we tried to obtain a calibration of the two components of the pre-main sequence binary system RS Cha by means of theoretical stellar models. We found that the only way to reproduce the observational parameters of RS Cha with standard stellar models is to decrease the initial abundances of carbon and nitrogen derived from the GN93 solar mixture of heavy elements by a few tenths of dex. Aims: In this work, we aim to reproduce the observational properties of the RS Cha stars with stellar evolution models based on the new AGS05 solar mixture recently derived from a three-dimensional solar model atmosphere. The AGS05 mixture is depleted in carbon, nitrogen and oxygen with respect to the GN93 mixture. Methods: We calculated new stellar models of the RS Cha components using the AGS05 mixture and appropriate opacity tables. We sought models that simultaneously satisfy the observations of the two components (masses, radii, luminosities, effective temperatures and metallicity). Results: We find that it is possible to reproduce the observational data of the RS Cha stars with AGS05 models based on standard input physics. From these models, the initial helium content of the system is Y~0.255 and its age is ~9.13 +- 0.12 Myr.

The present paper provides a general overview of the asteroseismic potential of delta Scuti stars in clusters, in particular focusing on convection diagnostics. We give a summarise of the last results obtained by the authors for the Praesepe cluster of which five delta Scuti stars are analysed. In that work, linear analysis is confronted with observations, using refined descriptions for the effects of rotation on the determination of the global stellar parameters and on the adiabatic oscillation frequency computations. A single, complete, and coherent solution for all the selected stars is found, which lead the authors to find important restrictions to the convection description for a certain range of effective temperatures. Furthermore, the method used allowed to give an estimate of the global parameters of the selected stars and constrain the cluster.

A comparison between linear stability analysis and observations of pulsation modes in five delta Scuti stars, belonging to the same cluster, is presented. The study is based on the work by Michel et al. (1999), in which such a comparison was performed for a representative set of model solutions obtained independently for each individual star considered. In this paper we revisit the work by Michel et al. (1999) following, however, a new approach which consists in the search for a single, complete, and coherent solution for all the selected stars, in order to constrain and test the assumed physics describing these objects. To do so, refined descriptions for the effects of rotation on the determination of the global stellar parameters and on the adiabatic oscillation frequency computations are used. In addition, a crude attempt is made to study the role of rotation on the prediction of mode instabilities.The present results are found to be comparable with those reported by Michel et al. (1999). Within the temperature range log T_eff = 3.87-3.88 agreement between observations and model computations of unstable modes is restricted to values for the mixing-length parameter alpha_nl less or equal to 1.50. This indicates that for these stars a smaller value for alpha_nl is required than suggested from a calibrated solar model. We stress the point that the linear stability analysis used in this work still assumes stellar models without rotation and that further developments are required for a proper description of the interaction between rotation and pulsation dynamics.

We present recent work undertaken by the Evolution and Seismic Tools Activity (ESTA) team of the CoRoT Seismology Working Group. The new ESTA-Task 3 aims at testing, comparing and optimising stellar evolution codes which include microscopic diffusion of the chemical elements resulting from pressure, temperature and concentration gradients. The results already obtained are globally satisfactory, but some differences between the different numerical tools appear that require further investigations.

We present the results of comparing three different implementations of the microscopic diffusion process in the stellar evolution codes CESAM and CLES. For each of these implementations we computed models of 1.0, 1.2 and 1.3 M$_{\odot}$. We analyse the differences in their internal structure at three selected evolutionary stages, as well as the variations of helium abundance and depth of the stellar convective envelope. The origin of these differences and their effects on the seismic properties of the models are also considered.

Context: The calibration of binary systems with accurately known masses and/or radii provides powerful tools to test stellar structure and evolution theory and to determine the age and helium content of stars. We study the eclipsing double-lined spectroscopic binary system RS Cha, for which we have accurate observations of the parameters of both stars (masses, radii, luminosities, effective temperatures and metallicity). Aims: We have calculated several sets of stellar models for the components of the RS Cha system, with the aim of reproducing simultaneously the available observational constraints and to estimate the age and initial helium abundance of the system. Methods: Using the CESAM stellar evolution code, we model both components starting from the initial mass and metallicity and adjusting the input parameters and physics in order to satisfy the observational constraints. Results: We find that the observations cannot be reproduced if we assume that the abundance ratios are solar but they are satisfied if carbon and nitrogen are depleted in the RS Cha system with respect to the Sun. This is in accordance with the abundances observed in other young stars. The RS Cha system is in an evolutionary stage at the end of the PMS phase where models are not strongly sensitive to various physical uncertainties. However we show that the oscillations of these two stars, which have been detected, would be able to discriminate between different options in the physical description of this evolutionary phase.

We present the work undertaken by the Evolution and Seismic Tools Activity (ESTA) team of the CoRoT Seismology Working Group. We have focused on two main tasks: Task 1 - now finished - has aimed at testing, comparing and optimising seven stellar evolution codes which will be used to model the internal structure and evolution of the CoRoT target stars. Task 2, still underway, aims at testing, comparing and optimising different seismic codes used to calculate the oscillations of models for different types of stars. The results already obtained are quite satisfactory, showing minor differences between the different numerical tools provided the same assumptions on the physical parameters are made. This work gives us confidence on the numerical tools that will be available to interpret the future CoRoT seismic data.

A comparison between the oscillation frequencies of six multi-periodic Delta Scuti stars of the Pleiades cluster and the eigenfrequencies of rotating stellar models that match the corresponding stellar parameters has been carried out. The assumption that all the stars considered have some common parameters, such as metallicity, distance or age, is imposed as a constraint. As a result, we have a best fit solution associated with a cluster metallicity of [Fe/H] ~ 0.067, an age between 70x10^6 and 100x10^6 yr and a distance modulus of mv-Mv=5.60-5.70 mag. All the stars were found to oscillate mainly in non-radial, low degree, low order p modes. Estimates of mass and rotation rates for each star are also obtained

We compute the rates P at which acoustic energy is injected into the solar radial p modes for several solar models. The solar models are computed with two different local treatments of convection: the classical mixing-length theory (MLT hereafter) and Canuto et al (1996)'s formulation (CGM hereafter). Among the models investigated here, our best models reproduce both the solar radius and the solar luminosity at solar age and the observed Balmer line profiles. For the MLT treatment, the rates P do depend significantly on the properties of the atmosphere whereas for the CGM's treatment the dependence of P on the properties of the atmosphere is found smaller than the error bars attached to the seismic measurements. The excitation rates P for modes associated with the MLT models are significantly underestimated compared with the solar seismic constraints. The CGM models yield values for P closer to the seismic data than the MLT models. We conclude that the solar p-mode excitation rates provide valuable constraints and according to the present investigation clearly favor the CGM treatment with respect to the MLT, although neither of them yields values of P as close to the observations as recently found for 3D numerical simulations.

The activities related to the preparation of the asteroseismic, photometric space mission COROT are described. Photoelectric observations, wide--field CCD photometry, uvbyB calibrations and further time--series have been obtained at different observatories and telescopes. They have been planned to complete the COROT programme in the direction of the galactic Anticenter. In addition to suitable asteroseismic targets covering the different evolutionary stages between ZAMS and TAMS, we discovered several other variable stars, both pulsating and geometrical. We compared results on the incidence of variability in the galactic Center and Anticenter directions. Physical parameters have been obtained and evolutionary tracks fitting them have been calculated. The peculiarities of some individual stars alre pointed out. Paper based on observations collected at the San Pedro Martir, Sierra Nevada, Teide, La Silla, Haute-Provence and Roque de Los Muchachos (Telescopio Nazionale Galileo and Mercator telescopes) observatories.

Using VLTI/VINCI angular diameter measurements, we constrain the evolutionary status of three asteroseismic targets: the stars $\delta$ Eri, $\xi$ Hya, $\eta$ Boo. Our predictions of the mean large frequency spacing of these stars are in agreement with published observational estimations. Looking without success for a companion of $\delta$ Eri we doubt on its classification as an RS CVn star.

We compute, for several solar models, the rates P at which the solar radial p modes are expected to be excited. The solar models are computed with two different local treatments of convection : the classical mixing-length theory (MLT hereafter) and Canuto, Goldmann and Mazzitelli(1996, CGM hereafter)'s formulation. For one set of solar models (EMLT and ECGM models), the atmosphere is gray and assumes Eddington's approximation. For a second set of models (KMLT and KCGM models), the atmosphere is built using a T(tau) law which has been obtained from a Kurucz's model atmosphere computed with the same local treatment of convection. The mixing-length parameter in the model atmosphere is chosen so as to provide a good agreement between synthetic and observed Balmer line profiles, while the mixing-length parameter in the interior model is calibrated so that the model reproduces the solar radius at solar age. For the MLT treatment, the rates P do depend significantly on the properties of the atmosphere. On the other hand, for the CGM treatment, differences in P between the ECGM and the KCGM models are very small compared to the error bars attached to the seismic measurements. The excitation rates P for modes from the EMLT model are significantly under-estimated compared with the solar seismic constraints. The KMLT model results in intermediate values for P and shows also an important discontinuity in the temperature gradient and the convective velocity. On the other hand, the KCGM model and the ECGM model yield values for P closer to the seismic data than the EMLT and KMLT models. We conclude that the solar p-mode excitation rates provide valuable constraints and according to the present investigation cleary favor the CGM treatment with respect to the MLT.

Two problems about the faintest Small Magellanic Cloud (SMC) Cepheids are addressed. On one hand evolutionary tracks fail to cross the Cepheid Instability Strip for the highest magnitudes (i.e. I-mag~17) where Cepheids are observed; Mass-Luminosity relations (ML) obtained from evolutionary tracks disagree with Mass-Luminosity relations derived from observations. We find that the above failures concern models built with standard input physics as well as with non-standard ones. The present work suggests that towards highest magnitudes, Cepheids stars undergo a selection effect caused by evolution: only the most metal poor stars cross the Instability Strip during the ``blue loop'' phase and are therefore the only ones which can be observed at low luminosity. This solution enables us to reproduce the shape of the lower part of the Instability Strip and improves the agreement between observed and theoretical ML-relations. Some issues are discussed, among them Beat Cepheids results argue strongly in favor of our hypothesis.

The excitation rate P of solar p-modes is computed with a model of stochatic excitation which involves constraints on the averaged properties of the solar turbulence. These constraints are obtained from a 3D simulation. Resulting values for P are found ~9 times larger than when the calculation assumes properties of turbulent convection which are derived from an 1D solar model based on Gough (1977)'s formulation of the mixing-length theory (GMLT). This difference is mainly due to the assumed values for the mean anisotropy of the velocity field in each case.Calculations based on 3D constraints bring the P maximum closer to the observational one.We also compute P for several models of intermediate mass stars (1Mo < M < 2Mo). Differences in the values of P_max between models computed with the classical mixing-length theory and GMLT models are found large enough for main sequence stars to suggest that measurements of P in this mass range will be able to discriminate between different models of turbulent convection.

The main scope of this paper is to investigate the possible existence of a metallicity dependence of the overshooting from main sequence stars turbulent cores. We focus on objects with masses in the range ~2.5 Msol - ~25 Msol. Basically, evolutionary time scale ratios are compared with star numbers ratios on the main sequence. Star populations are synthesized using grids of evolutionary tracks computed with various overshooting amounts. Observational material is provided by the large and homogeneous photometric database of OGLE 2 project for the Magellanic clouds. Attention is paid to the study of uncertainties: distance modulus, intergalactic and interstellar reddening, IMF slope and average binarity rate. Rotation and chemical composition gradient are also considered. The result for the overshooting distance is l_over(SMC)= 0.40 +0.12-0.06 Hp (Z=0.004) and l_over(LMC)= 0.10+0.17-0.10 Hp (Z=0.008) suggesting a possible dependence of the extent of the mixed central regions with metallicity within the considered mass range. Unfortunately it is not yet possible to fully disentangle effects of mass and chemical composition.

In the present work, we study correlations between stellar fundamental parameters and the oscillation amplitude for delta Scuti stars. We present this study for a sample of 17 selected delta Scuti stars belonging to 5 young open clusters. Taking advantage of properties of delta Scuti stars in clusters, we correct the photometric parameters of our objects for the effect of fast rotation. We confirm the benefit of applying such corrections in this kind of studies. In addition, the technique used for this correction allows us to obtain an estimation of stellar parameters like the angle of inclination and the rotation rate, usually not accessible. A significant correlation between the parameter i' (estimation of the angle of inclination of the star) and the oscillation amplitude is found. A discussion and interpretation of these a priori surprising results is proposed, in terms of a possible selection rule for oscillation modes of delta Scuti stars.

In this work we propose a preliminary seismic investigation of $\delta$ Scuti stars in the Pleiades cluster, focusing on potential diagnostics of convection and core-overshooting. Taking into account the effect of fast rotation in the modelling, we compare observed frequencies for 4 $\delta$ Scuti stars with radial linear instability predictions. A satisfying agreement is reached between the predicted ranges of unstable modes and those derived from observations for ``low-mass'' stars ($\sim 1.55 M_{\odot}$). However, a strong disagreement is found for ``high-mass'' stars ($\sim 1.77 M_{\odot}$), whatever the mixing length $(\alpha)$ value. These results are compared with previous ones obtained for Praesepe.

Solar-like oscillations are stochastically excited by turbulent convection. In this work we investigate changes in the acoustic oscillation power spectrum of solar-type stars by varying the treatment of convection in the equilibrium structure and the properties of the stochastic excitation model. We consider different stellar models computed with the standard mixing-length description by Bohm-Vitense (1958) and with a generalized formulation of the mixing-length approach by Gough (1976, 1977). We calculate the acoustic power generated by the turbulent convection which is injected stochastically into the acoustic pulsation modes. Large differences in the oscillation powers are obtained depending on the choice of the assumed convection formulation. We show that the high-quality data Eddington will provide, will allow us to distinguish between theoretical predictions of acoustic power spectra obtained with different convection models.

We compare the accurate empirical mass-luminosity (M-L) relation based on five Hyades binary systems to predictions of stellar models calculated with various input parameters (helium, metallicity, age) or physics (mixing-length ratio, model atmosphere, equation of state, microscopic diffusion). Models based on a helium content Ysim0.28 inferred from the dydz enrichment law are more than 3sigma beyond the observations, suggesting that the initial helium abundance is lower than expected from its supersolar metallicity. With the photometric metallicity (FeH=0.144pm0.013 dex, Grenon (2000) we derive Y=0.255\pm0.009. Because of the (Y,FeH) degeneracy in the M-L plane, the uncertainty grows to Delta Y=0.013 if the metallicity from spectroscopy is adopted (FeH=0.14pm0.05 dex, Cayrel de Strobel et al 1997). We use these results to discuss the Hertzsprung-Russell (HR) diagram of the Hyades, in the (Mv,B-V) plane, based on the very precise Hipparcos dynamical parallaxes. Present models fit the tight observed sequence very well except at low temperatures. In the low mass region of the HR diagram sensitive to the mixing-length parameter (aMLT), the slope of the main sequence (MS) suggests that aMLT could decrease from a solar (or even supersolar) value at higher mass to subsolar values at low mass, which is also supported by the modeling of the vB22 M-L relation. We find that the discrepancy at low temperatures (B-V\gtrsim 1.2) remains, even if an improved equation of state or better model atmospheres are used. Finally, we discuss the positions of the stars at turn-off in the light of their observed rotation rates and we deduce that the maximum age of the Hyades predicted by the present models is sim650 Myr.

Pulsational properties of 1.8 M$_{\odot}$ stellar models covering the latest stages of contraction toward the main sequence up to early hydrogen burning phases are investigated by means of linear nonadiabatic analyses. Results confirm that pre-main sequence stars (pms) which cross the classical instability strip on their way toward the main sequence are pulsationally unstable with respect to the classical opacity mechanisms. For both pms and main sequence types of models in the lower part of the instability strip, the unstable frequency range is found to be roughly the same. Some non-radial unstable modes are very sensitive to the deep internal structure of the star. It is shown that discrimination between pms and main sequence stages is possible using differences in their oscillation frequency distributions in the low frequency range.

Acoustic power and oscillation amplitudes of radial oscillations computed for a solar model are compared with solar seismic observations. The oscillations are assumed stochastically excited by turbulence. The numerical computations are based upon a theoretical formulation of the power going into solar like oscillation modes as proposed by Samadi et al. (2000) in a companion paper. This formulation allows to investigate several assumptions concerning properties of the stellar turbulence. We find that the entropy source plays a dominant role in the stochastic excitation compared with the Reynold stress source in agreement with Goldreich et al. (1994). We consider several turbulent kinetic energy spectra suggested by different observations of the solar granulation. Differences between turbulent spectra manifest themselves by large differences in the computed oscillation powers at high oscillation frequency. Two free parameters which are introduced in the description of the turbulence enter the expression for the acoustic power. These parameters are adjusted in order to fit to the solar observations of the surface velocity oscillations. The best fit is obtained with the kinetic energy spectrum deduced from the observations of the solar granulation by Nesis et al. (1993); the corresponding adjusted parameters are found to be compatible with the theoretical upper limit which can be set on these parameters. The adopted theoretical approach improves the agreement between solar seismic observations and numerical results.

The acoustic power injected by turbulent convection into solar-like oscillations depends on the details of the turbulent spectrum. A theoretical formulation for the oscillation power is developed which generalizes previous ones. The formulation is first calibrated on a solar model in such a way as to reproduce the solar seismic data. This allows to investigate different assumptions about the stellar turbulent spectrum. We next explore consequences of the assumed turbulent description for some potentially solar-like oscillating stars. Large differences are found in the oscillation power of a given star when using different turbulent spectra as well as in a star to star comparison. Space seismic observations of such stars will be valuable for discriminating between several turbulent models.

Detailed evolutionary models of the visual binary alpha Centauri, including pre main-sequence evolution, have been performed using the masses recently determined by Pourbaix et al. (1999). Models have been constructed using the CEFF equation of state, OPAL opacities, NACRE thermonuclear reaction rates and microscopic diffusion. A chi^2-minimization is performed to derive the most reliable set of modeling parameters wp={t_alpha Cen, Yi, [Fe/H]i, alpha A, alpha B}, where t alpha Cen is the age of the system, Yi the initial helium content, [Fe/H]i the initial metallicity and, alpha A and alpha B the convection parameters of the two components. Using the basic Bohm-Vitense (1958) mixing-length theory of convection, we derive wp BV={2710 Myr, 0.284,0.257, 1.53, 1.57}. We obtain a noticeably smaller age than estimated previously, in agreement with Pourbaix et al. (1999), mainly because of the larger masses. If convective core overshoot is considered we get wp ov={3530 Myr, 0.279,0.264,1.64,1.66}. The use of Canuto & Mazitelli (1991, 1992) convection theory leads to the set wp CM={4086 Myr, 0.271, 0.264, 0.964, 0.986}. Using the observational constraints adopted by Guenther & Demarque (2000), and the basic mixing-length theory, we obtain wp GD={5640 Myr, 0.300, 0.296, 1.86, 1.97} and surface lithium depletions close to their observed values. A seismological analysis of our calibrated models has been performed. The determination of large and small spacings between the frequencies of acoustic oscillations from seismic observations would help to discriminate between the models of alpha Cen computed with different masses and to confirm or rules out the new determination of masses.

During the last decade, the understanding of fine features of the structure and evolution of stars has become possible as a result of enormous progress made in the acquisition of high-quality observational and experimental data and of new developments and refinements in the theoretical description of stellar plasmas. The confrontation of high-quality observations with sophisticated stellar models has allowed many aspects of the theory to be validated, and several characteristics of stars relevant to Galactic evolution and cosmology to be inferred. This paper is a review of the results of recent studies undertaken in the context of the Hipparcos mission, taking benefit of the high-quality astrometric data it has provided. Successes are discussed, as well as the problems that have arisen and suggestions proposed to solve them. Future observational and theoretical developments expected and required in the field are also presented.

From an initial sample of a few hundred stars selected for an Hipparcos program, a subsample of 33 objects with direct determination of their effective temperature, bolometric magnitude and [Fe/H] has been derived. An accurate observational (logTeff, Mbol) HR diagram has been obtained, and compared to theoretical isochrones. Attention has been concentrated on the cool part of the HR diagram, for which evolutionary effects are negligible. Whereas solar metallicity stars show a reasonable agreement with theoretical expectation, a clear discrepancy occurs for stars more metal-poor than [Fe/H] = -0.5. This discrepancy is reduced to practically zero, if corrections to LTE abundances are taken into account for Fe, and if sedimentation effects are included in stellar evolution computations.

We use absolute trigonometric parallaxes from the Hipparcos Catalogue to determine individual distances to members of the Hyades cluster, from which the 3-dimensional structure of the cluster can be derived. Inertially-referenced proper motions are used to rediscuss distance determinations based on convergent-point analyses. A combination of parallaxes and proper motions from Hipparcos, and radial velocities from ground-based observations, are used to determine the position and velocity components of candidate members with respect to the cluster centre, providing new information on cluster membership: 13 new candidate members within 20 pc of the cluster centre have been identified. Farther from the cluster centre there is a gradual merging between certain cluster members and field stars, both spatially and kinematically. Within the cluster, the kinematical structure is fully consistent with parallel space motion of the component stars with an internal velocity dispersion of about 0.3 km/s. The spatial structure and mass segregation are consistent with N-body simulation results, without the need to invoke expansion, contraction, rotation, or other significant perturbations of the cluster. The quality of the individual distance determinations permits the cluster zero-age main sequence to be accurately modelled. The helium abundance for the cluster is determined to be Y=0.26+/-0.02 which, combined with isochrone modelling including convective overshooting, yields a cluster age of 625+/-50 Myr. The distance to the observed centre of mass is 46.34+/-0.27 pc, corresponding to a distance modulus m-M=3.33+/-0.01 mag for the objects within 10 pc of the cluster centre (roughly corresponding to the tidal radius). Discrepancies with previous distance estimates are investigated and explained.