During its initial orbital phase in early 2019, the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission detected small particles apparently emanating from the surface of the near-Earth asteroid (101955) Bennu in optical navigation images. Identification and characterization of the physical and dynamical properties of these objects became a mission priority in terms of both spacecraft safety and scientific investigation. Traditional techniques for particle identification and tracking typically rely on manual inspection and are often time-consuming. The large number of particles associated with the Bennu events and the mission criticality rendered manual inspection techniques infeasible for long-term operational support. In this work, we present techniques for autonomously detecting potential particles in monocular images and providing initial correspondences between observations in sequential images, as implemented for the OSIRIS-REx mission.

Surface roughness is an important metric in understanding how the geologic history of an asteroid affects its small-scale topography and it provides an additional means to quantitatively compare one asteroid with another. In this study, we report the first detailed global surface roughness maps of 25143 Itokawa at horizontal scales from 8--32~m. Comparison of the spatial distribution of the surface roughness of Itokawa with 433 Eros, the other asteroid for which this kind of analysis has been possible, indicates that the two asteroids are dominated by different geologic processes. On Itokawa, the surface roughness reflects the results of down-slope activity that moves fine grained material into geopotential lows and leaves large blocks in geopotential highs. On 433 Eros, the surface roughness is controlled by geologically-recent large impact craters. In addition, large longitudinal spatial variations of surface roughness could impact the role of YORP on Itokawa.

The OSIRIS-REx asteroid sample-return mission is investigating primitive near-Earth asteroid (101955) Bennu. Thousands of images will be acquired by the MapCam instrument onboard the spacecraft, an imager with four color filters based on the Eight-Color Asteroid Survey (ECAS): $b$' (473 nm), $v$ (550 nm), $w$ (698 nm), and $x$ (847 nm). This set of filters will allow identification and characterization of the absorption band centered at 700 nm and associated with hydrated silicates. In this work, we present and validate a spectral clustering methodology for application to the upcoming MapCam images of the surface of Bennu. Our procedure starts with the projection, calibration, and photometric correction of the images. In a second step, we apply a K-means algorithm and we use the Elbow criterion to identify natural clusters. This methodology allows us to find distinct areas with spectral similarities, which are characterized by parameters such as the spectral slope $S$' and the center and depth of the 700-nm absorption band, if present. We validate this methodology using images of (1) Ceres from NASA's Dawn mission. In particular, we analyze the Occator crater and Ahuna Mons. We identify one spectral cluster--located in the outer parts of the Occator crater interior--showing the 700-nm hydration band centered at 698 $\pm$ 7 nm and with a depth of 3.4 $\pm$ 1.0 \%. We interpret this finding in the context of the crater's near-surface geology.

We observed the near-Earth asteroid (101955) Bennu from the ground in 1999 and 2005, and with the Hubble Space Telescope in 2012, to constrain its rotation rate. The data reveal an acceleration of $2.64 \pm 1.05 \times 10^{-6} \mathrm{deg\ day}^{-2}$, which could be due to a change in the moment of inertia of Bennu or to spin up from the YORP effect or other source of angular momentum. The best solution is within 1 sigma of the period determined by Nolan et al. (2013). The OSIRIS-REx mission will determine the rotation state independently in 2019. Those measurements should show whether the change in rotation rate is a steady increase (due, for example, to the YORP effect) or some other phenomenon. The precise shape and surface properties measured by the OSIRIS-REx science team will allow for a better understanding of variations in rotation rate of small asteroids.

Carbonaceous chondrite meteorites are some of the oldest Solar System planetary materials available for study. The CI group has bulk abundances of elements similar to those of the solar photosphere. Of particular interest in carbonaceous chondrite compositions are labile elements, which vaporize and mobilize efficiently during post-accretionary parent-body heating events. Thus, they can record low-temperature alteration events throughout asteroid evolution. However, the precise nature of labile-element mobilization in planetary materials is unknown. Here we characterize the thermally induced movements of the labile elements S, As, Se, Te, Cd, Sb, and Hg in carbonaceous chondrites by conducting experimental simulations of volatile-element mobilization during thermal metamorphism. This process results in appreciable loss of some elements at temperatures as low as 500 K. This work builds on previous laboratory heating experiments on primitive meteorites and shows the sensitivity of chondrite compositions to excursions in temperature. Elements such as S and Hg have the most active response to temperature across different meteorite groups. Labile element mobilization in primitive meteorites is essential for quantifying elemental fractionation that occurred on asteroids early in Solar System history. This work is relevant to maintaining a pristine sample from asteroid (101955) Bennu from the OSIRIS-REx mission and constraining the past orbital history of Bennu. Additionally, we discuss thermal effects on surface processes of near-Earth asteroids, including the thermal history of "rock comets" such as (3200) Phaethon. This work is also critical for constraining the concentrations of contaminants in vaporized water extracted from asteroid regolith as part of future in situ resource utilization for sustained robotic and human space exploration.

(3200) Phaethon is a compelling object as it has an asteroidal appearance and spectrum, produces a weak dust tail during perihelion at just 0.14 AU, and is the parent body of the Geminid Meteor Shower. A better understanding of the physical properties of Phaethon is needed to understand the nature of its current and previous activity, relationship to potential source populations, and to plan for the upcoming flyby of the DESTINY+ spacecraft of Phaethon in the 2020s. We performed rotationally-resolved spectroscopy of Phaethon at visible and near-infrared wavelengths (0.4-2.5 microns) in 2007 and 2017, respectively, to better understand its surface properties. The visible and near-infrared observations both spanned nearly a full rotation or more and were under similar observing geometries, covering the whole surface with the exception of the north pole. The visible wavelengths show blue slopes with only minor slope variations and no absorption features. The NIR data is minimally varying and concave upwards, from very blue to blue-neutral with increasing wavelength. We fit the short-wavelength tail of Phaethon's thermal emission and retrieve an average visible albedo of pv = 0.08 +/- 0.01, which is lower than previous measurements but plausible in light of the recent larger radar-measured diameter of Phaethon. We retrieve an average infrared beaming parameter of Phaethon of eta = 1.70 +/- 0.05, which is similar to previous results. We discuss the implications of Phaethon's visible and near-infrared spectrum as well as the lower albedo on its origin, source population, and evolutionary history.

The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can readily be ingested by the spacecraft's sampling mechanism. To inform this mission-critical decision, the surface of Bennu is mapped using the OSIRIS-REx Camera Suite and the images are used to develop several foundational data products. Acquiring the necessary inputs to these data products requires observational strategies that are defined specifically to overcome the challenges associated with mapping a small irregular body. We present these strategies in the context of assessing candidate sample-sites at Bennu according to a framework of decisions regarding the relative safety, sampleability, and scientific value across the asteroid's surface. To create data products that aid these assessments, we describe the best practices developed by the OSIRIS-REx team for image-based mapping of irregular small bodies. We emphasize the importance of using 3D shape models and the ability to work in body-fixed rectangular coordinates when dealing with planetary surfaces that cannot be uniquely addressed by body-fixed latitude and longitude.

NASA's OSIRIS-REx and JAXA's Hayabusa2 sample-return missions are currently on their way to encounter primitive near-Earth asteroids (101955) Bennu and (162173) Ryugu, respectively. Spectral and dynamical evidence indicates that these near-Earth asteroids originated in the inner part of the main belt. There are several primitive collisional families in this region, and both these asteroids are most likely to have originated in the Polana-Eulalia family complex. We present the expected spectral characteristics of both targets based on our studies of our primitive collisional families in the inner belt: Polana-Eulalia, Erigone, Sulamitis, and Clarissa. Observations were obtained in the framework of our PRIMitive Asteroids Spectroscopic Survey (PRIMASS). Our results are especially relevant to the planning and interpretation of in-situ images and spectra to be obtained by the two spacecraft during the encounters with their targets.

OSIRIS-REx will return pristine samples of carbonaceous asteroid Bennu. This article describes how pristine was defined based on expectations of Bennu and on a realistic understanding of what is achievable with a constrained schedule and budget, and how that definition flowed to requirements and implementation. To return a pristine sample, the OSIRIS- REx spacecraft sampling hardware was maintained at level 100 A/2 and <180 ng/cm2 of amino acids and hydrazine on the sampler head through precision cleaning, control of materials, and vigilance. Contamination is further characterized via witness material exposed to the spacecraft assembly and testing environment as well as in space. This characterization provided knowledge of the expected background and will be used in conjunction with archived spacecraft components for comparison with the samples when they are delivered to Earth for analysis. Most of all, the cleanliness of the OSIRIS-REx spacecraft was achieved through communication among scientists, engineers, managers, and technicians.

The requirements-driven OSIRIS-REx Camera Suite (OCAMS) acquires images essential to collecting a sample from the surface of Bennu. During proximity operations, these images document the presence of satellites and plumes, record spin state, enable an accurate digital terrain model of the shape of the asteroid and identify any surface hazards. They confirm the presence of sampleable regolith on the surface, observe the sampling event itself, and image the sample head in order to verify its readiness to be stowed. They document the history of Bennu as an example of early solar system material, as a microgravity body with a planetesimal size-scale, and as a carbonaceous object. OCAMS is fitted with three cameras. The MapCam records point-source color images on approach to the asteroid in order to connect ground-based point-source observations of Bennu to later higher-resolution surface spectral imaging. The SamCam documents the sample site before, during, and after it is disturbed by the sample mechanism. The PolyCam, using its focus mechanism, observes the sample site at sub-centimeter resolutions, revealing surface texture and morphology. While their imaging requirements divide naturally between the three cameras, they preserve a strong degree of functional overlap. OCAMS and the other spacecraft instruments allow the OSIRIS-REx mission to collect a sample from a microgravity body on the same visit during which it was first optically acquired from long range, a useful capability as humanity explores near-Earth, Main-Belt and Jupiter Trojan asteroids.

The OSIRIS-REx Thermal Emission Spectrometer (OTES) will provide remote measurements of mineralogy and thermophysical properties of Bennu to map its surface, help select the OSIRIS-REx sampling site, and investigate the Yarkovsky effect. OTES is a Fourier transform spectrometer covering the spectral range 5.71 - 100 {\mu}m (1750 - 100 cm-1) with a spectral sample interval of 8.66 cm-1 and a 6.5-mrad field of view. The OTES telescope is a 15.2-cm diameter Cassegrain telescope that feeds a flat-plate Michelson moving mirror mounted on a linear voice-coil motor assembly. A single uncooled deuterated L-alanine doped triglycine sulfate (DLATGS) pyroelectric detector is used to sample the interferogram every two seconds. Redundant ~0.855 {\mu}m laser diodes are used in a metrology interferometer to provide precise moving mirror control and IR sampling at 772 Hz. The beamsplitter is a 38-mm diameter, 1-mm thick chemical vapor deposited diamond with an antireflection microstructure to minimize surface reflection. An internal calibration cone blackbody target provides radiometric calibration. The radiometric precision in a single spectrum is <= 2.2 x 10-8 W cm-2 sr-1/cm-1 between 300 and 1350 cm-1. The absolute integrated radiance error is <1% for scene temperatures ranging from 150 to 380 K. The overall OTES envelope size is 37.5 x 28.9 x 52.2 cm, and the mass is 6.27 kg. The power consumption is 10.8 W average. The OTES was developed by Arizona State University with Moog Broad Reach developing the electronics. OTES was integrated, tested, and radiometrically calibrated on the Arizona State University campus in Tempe, AZ.

The OSIRIS-REx Visible and Infrared Spectrometer (OVIRS) is a point spectrometer covering the spectral range of 0.4 to 4.3 microns (25,000-2300 cm-1). Its primary purpose is to map the surface composition of the asteroid Bennu, the target asteroid of the OSIRIS-REx asteroid sample return mission. The information it returns will help guide the selection of the sample site. It will also provide global context for the sample and high spatial resolution spectra that can be related to spatially unresolved terrestrial observations of asteroids. It is a compact, low-mass (17.8 kg), power efficient (8.8 W average), and robust instrument with the sensitivity needed to detect a 5% spectral absorption feature on a very dark surface (3% reflectance) in the inner solar system (0.89-1.35 AU). It, in combination with the other instruments on the OSIRIS-REx Mission, will provide an unprecedented view of an asteroid's surface.

In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on Jan. 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in August 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennus resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023.

The Design Reference Asteroid (DRA) is a compilation of all that is known about the OSIRIS-REx mission target, asteroid (101955) Bennu. It contains our best knowledge of the properties of Bennu based on an extensive observational campaign that began shortly after its discovery, and has been used to inform mission plan development and flight system design. The DRA will also be compared with post-encounter science results to determine the accuracy of our Earth-based characterization efforts. The extensive observations of Bennu in 1999 has made it one of the best-characterized near-Earth asteroids. Many physical parameters are well determined, and span a number of categories: Orbital, Bulk, Rotational, Radar, Photometric, Spectroscopic, Thermal, Surface Analog, and Environment Properties. Some results described in the DRA have been published in peer-reviewed journals while others have been reviewed by OSIRIS-REx Science Team members and/or external reviewers. Some data, such as Surface Analog Properties, are based on our best knowledge of asteroid surfaces, in particular those of asteroids Eros and Itokawa. This public release of the OSIRIS-REx Design Reference Asteroid is a annotated version of the internal OSIRIS-REx document OREX-DOCS-04.00-00002, Rev 9 (accepted by the OSIRIS-REx project on 2014-April-14). The supplemental data products that accompany the official OSIRIS-REx version of the DRA are not included in this release. We are making this document available as a service to future mission planners in the hope that it will inform their efforts.

The target asteroid of the OSIRIS-REx asteroid sample return mission, (101955) Bennu (formerly 1999 RQ$_{36}$), is a half-kilometer near-Earth asteroid with an extraordinarily well constrained orbit. An extensive data set of optical astrometry from 1999--2013 and high-quality radar delay measurements to Bennu in 1999, 2005, and 2011 reveal the action of the Yarkovsky effect, with a mean semimajor axis drift rate $da/dt = (-19.0 \pm 0.1)\times 10^{-4}$ au/Myr or $284\pm 1.5\;\rm{m/yr}$. The accuracy of this result depends critically on the fidelity of the observational and dynamical model. As an example, neglecting the relativistic perturbations of the Earth during close approaches affects the orbit with $3\sigma$ significance in $da/dt$. The orbital deviations from purely gravitational dynamics allow us to deduce the acceleration of the Yarkovsky effect, while the known physical characterization of Bennu allows us to independently model the force due to thermal emissions. The combination of these two analyses yields a bulk density of $\rho = 1260\pm70\,\rm{kg/m^3}$, which indicates a macroporosity in the range $40\pm10$% for the bulk densities of likely analog meteorites, suggesting a rubble-pile internal structure. The associated mass estimate is $(7.8\pm0.9)\times 10^{10}\, \rm{kg}$ and $GM = 5.2\pm0.6\,\rm{m^3/s^2}$. Bennu's Earth close approaches are deterministic over the interval 1654--2135, beyond which the predictions are statistical in nature. In particular, the 2135 close approach is likely within the lunar distance and leads to strong scattering and therefore numerous potential impacts in subsequent years, from 2175--2196. The highest individual impact probability is $9.5\times 10^{-5}$ in 2196, and the cumulative impact probability is $3.7\times 10^{-4}$, leading to a cumulative Palermo Scale of -1.70.

The so-called Nysa-Polana complex of asteroids is a diverse and widespread group. It appears to be two overlapping families of different asteroid taxonomies: (44) Nysa is an E-type asteroid with the lowest number in the midst of a predominantly S-type cluster and (142) Polana is a B-type asteroid near the low-albedo B- and C-type cluster. Using the data from the Wide-field Infrared Survey Explorer (WISE) mission we have re-analyzed the region around the Nysa-Polana complex in the inner Main Belt, focusing on the low-albedo population. (142) Polana does not appear to be a member of the family of low-albedo asteroids in the Nysa-Polana complex. Rather, the largest is asteroid (495) Eulalia. This asteroid has never before been linked to this complex for an important dynamical reason: it currently has a proper eccentricity slightly below the range of most of the family members. However, its orbit is very close to the 3:1 mean motion resonance with Jupiter and is in a weak secular resonance. We show that its osculating eccentricity varies widely on short timescales and the averaged value diffuses over long timescales. The diffusive orbit, low-albedo, taxonomic similarity and semimajor axis strongly suggests that despite its current proper eccentricity, (495) Eulalia could have recently been at an orbit very central to the family. Hierarchical Clustering Method tests confirm that at an eccentricity of e=0.15, (495) Eulalia could be the parent of the family. The ``Eulalia family'' was formed between 900--1500 Myr ago, and likely resulted from the breakup of a 100--160 km parent body. There is also compelling evidence for an older and more widespread primitive family in the same region of the asteroid belt parented by asteroid (142) Polana.

Extrasolar planet host stars have been found to be enriched in key planet-building elements. These enrichments have the potential to drastically alter the composition of material available for terrestrial planet formation. Here we report on the combination of dynamical models of late-stage terrestrial planet formation within known extrasolar planetary systems with chemical equilibrium models of the composition of solid material within the disk. This allows us to determine the bulk elemental composition of simulated extrasolar terrestrial planets. A wide variety of resulting planetary compositions are found, ranging from those that are essentially "Earth-like", containing metallic Fe and Mg-silicates, to those that are dominated by graphite and SiC. This shows that a diverse range of terrestrial planets may exist within extrasolar planetary systems.

Extrasolar planetary host stars are enriched in key planet-building elements. These enrichments have the potential to drastically alter the building blocks available for terrestrial planet formation. Here we report on the combination of dynamical models of late-stage terrestrial planet formation within known extrasolar planetary systems with chemical equilibrium models of the composition of solid material within the disk. This allows us to constrain the bulk elemental composition of extrasolar terrestrial planets. A wide variety of resulting planetary compositions exist, ranging from those that are essentially "Earth-like", containing metallic Fe and Mg-silicates, to those that are dominated by graphite and SiC. This implies that a diverse range of terrestrial planets are likely to exist within extrasolar planetary systems.

No terrestrial planet formation simulation completed to date has considered the detailed chemical composition of the planets produced. While many have considered possible water contents and late veneer compositions, none have examined the bulk elemental abundances of the planets produced as an important check of formation models. Here we report on the first study of this type. Bulk elemental abundances based on disk equilibrium studies have been determined for the simulated terrestrial planets of O'Brien et al. (2006). These abundances are in excellent agreement with observed planetary values, indicating that the models of O'Brien et al. (2006) are successfully producing planets comparable to those of the Solar System in terms of both their dynamical and chemical properties. Significant amounts of water are accreted in the present simulations, implying that the terrestrial planets form "wet" and do not need significant water delivery from other sources. Under the assumption of equilibrium controlled chemistry, the biogenic species N and C still need to be delivered to the Earth as they are not accreted in significant proportions during the formation process. Negligible solar photospheric pollution is produced by the planetary formation process. Assuming similar levels of pollution in other planetary systems, this in turn implies that the high metallicity trend observed in extrasolar planetary systems is in fact primordial.

We present elemental abundances of 118 stars (28 of which are known extrasolar planetary host stars) observed as part of the Anglo-Australian Planet Search. Abundances of O, Mg, Cr, Y, Zr, Ba, Nd and Eu (along with previously published abundances for C and Si) are presented. This study is one of the first to specifically examine planetary host stars for the heavy elements produced by neutron capture reactions. We find that the host stars are chemically different to both the standard solar abundance and non-host stars in all elements studied, with enrichments over non-host stars ranging from 0.06 dex (for O) to 0.11 dex (for Cr and Y). Such abundance trends are in agreement with other previous studies of field stars and lead us to conclude that the chemical anomalies observed in planetary host stars are the result of normal galactic chemical evolution processes. Based on this observation, we conclude that the observed chemical traits of planetary host stars are primordial in origin, coming from the original nebula and not from a ``pollution'' process occurring during or after formation and that planet formation occurs naturally with the evolution of stellar material.