Context. Asymptotic giant branch stars are cool luminous evolved stars that are well observable across the Galaxy and populating Gaia data. They have complex stellar surface dynamics Aims. On the AGB star CL Lac, it has been shown that the convection-related variability accounts for a substantial part of the Gaia DR2 parallax error. We observed this star with the MIRC-X beam combiner installed at the CHARA interferometer to detect the presence of stellar surface inhomogeneities. Methods. We performed the reconstruction of aperture synthesis images from the interferometric observations at different wavelengths. Then, we used 3D radiative hydrodynamics simulations of stellar convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps in the spectral channels of MIRC-X observations. Then, we determined the stellar radius and compared the 3D synthetic maps to the reconstructed ones focusing on matching the intensity contrast, the morphology of stellar surface structures, and the photocentre position at two different spectral channels, 1.52 and 1.70 micron, simultaneously. Results. We measured the apparent diameter of CL Lac at two wavelengths and recovered the radius using a Gaia parallax. In addition to this, the reconstructed images are characterised by the presence of a brighter area that largely affects the position of the photocentre. The comparison with 3D simulation shows good agreement with the observations both in terms of contrast and surface structure morphology, meaning that our model is adequate for explaining the observed inhomogenities. Conclusions. This work confirms the presence of convection-related surface structures on an AGB star of Gaia DR2. Our result will help us to take a step forward in exploiting Gaia measurement uncertainties to extract the fundamental properties of AGB stars using appropriate RHD simulations.

In young multiple stellar systems the gravitational influence of the stars shapes the circumstellar disk, controlling accretion and the material available for planet formation. Our observations of the triple system GW Orionis provide direct evidence for disk tearing, where the gravitational torques due to misaligned disk/orbit planes warp the disk and break the inner disk into precessing rings. We image an eccentric ring that is misaligned with respect to the orbital planes and outer disk, and casts shadows on the strongly warped intermediate disk. Our ring/warp geometry constraints and the fully characterized perturber orbits make the system a potential Rosetta Stone for studying disk hydrodynamics. The ring might offer suitable conditions for planet formation, providing a mechanism for forming wide-separation planets on highly oblique orbits.

We implement an electron avalanche photodiode (e-APD) in the MIRC-X instrument, upgrade of the 6-telescope near-infrared imager MIRC, at the CHARA array. This technology should improve the sensitivity of near-infrared interferometry. We first used the classical Mean-Variance analysis to measure the system gain and the amplification gain. We then developed a physical model of the statistical distribution of the camera output signal. This model is based on multiple convolutions of the Poisson statistic, the intrinsic avalanche gain distribution, and the observed distribution of the background signal. At low flux level, this model constraints independently the incident illumination level, the total gain, and the excess noise factor of the amplification. We measure a total transmission of $48\pm3\%$ including the cold filter and the Quantum Efficiency. We measure a system gain of 0.49 ADU/e, a readout noise of $10$ ADU, and amplification gains as high as 200. These results are consistent between the two methods and therefore validate our modeling approach. The measured excess noise factor based on the modeling is $1.47\pm0.03$, with no obvious dependency with flux level or amplification gain. The presented model allows measuring the characteristics of the e-APD array at low flux level independently of preexisting calibration. With $<0.3$\,electron equivalent readout noise at kilohertz frame rates, we confirm the revolutionary performances of the camera with respect to the PICNIC or HAWAII technologies. However, the measured excess noise factor is significantly higher than the one claimed in the literature ($<$1.25), and explains why counting multiple photons remains challenging with this camera.

We present the design for MYSTIC, the Michigan Young STar Imager at CHARA. MYSTIC will be a K-band, cryogenic, 6-beam combiner for the Georgia State University CHARA telescope array. The design follows the image-plane combination scheme of the MIRC instrument where single-mode fibers bring starlight into a non-redundant fringe pattern to feed a spectrograph. Beams will be injected in polarization-maintaining fibers outside the cryogenic dewar and then be transported through a vacuum feedthrough into the ~220K cold volume where combination is achieved and the light is dispersed. We will use a C-RED One camera (First Light Imaging) based on the eAPD SAPHIRA detector to allow for near-photon-counting performance. We also intend to support a 4-telescope mode using a leftover integrated optics component designed for the VLTI-GRAVITY experiment, allowing better sensitivity for the faintest targets. Our primary science driver motivation is to image disks around young stars in order to better understand planet formation and how forming planets might influence disk structures.

We characterize a near-infrared C-RED ONE camera from First Light Imaging (FLI). This camera uses a SAPHIRA electron avalanche photo-diode array (e-APD) from Leonardo (previously Selex). To do so, we developed a model of the signal distribution. This model allows a measurement of the gain and the Excess Noise Factor (ENF) independently of preexisting calibration such as the system gain. The results of this study show a gain which is 0.53 +/- 0.04 times the gain reported by the manufacturer. The measured ENF is 1.47 +/- 0.03 when we expected 1.25. For an avalanche gain of 60 and a frame rate larger than 100 Hz, the total noise can be lower than 1 e-/frame/pixel. The lowest dark current level is 90e-/s/pixel, in agreement with the expected H-band background passing through the camera window. These performance values provide a significant improvement compared to earlier-generation PICNIC camera and allowed us to improve the performance of the Michigan infrared combiner (MIRC) instrument at the Center for High Angular Resolution Astronomy (CHARA), as part of our MIRC-X instrumentation project.

MIRC-X is an upgrade of the six-telescope infrared beam combiner at the CHARA telescope array, the world's largest baseline interferometer in the optical/infrared, located at the Mount Wilson Observatory in Los Angeles. The upgraded instrument features an ultra-low noise and fast frame rate infrared camera (SAPHIRA detector) based on e-APD technology. We report the MIRC-X sensitivity upgrade work and first light results in detail focusing on the detector characteristics and software architecture.

MIRC-X is a new beam combination instrument at the CHARA array that enables 6-telescope interferometric imaging on object classes that until now have been out of reach for milliarcsecond-resolution imaging. As part of an instrumentation effort lead by the University of Exeter and University of Michigan, we equipped the MIRC instrument with an ultra-low read-noise detector system and extended the wavelength range to the J and H-band. The first phase of the MIRC-X commissioning was successfully completed in June 2017. In 2018 we will commission polarisation control to improve the visibility calibration and implement a 'cross-talk resiliant' mode that will minimise visibility cross-talk and enable exoplanet searches using precision closure phases. Here we outline our key science drivers and give an overview about our commissioning timeline. We comment on operational aspects, such as remote observing, and the prospects of co-phased parallel operations with the upcoming MYSTIC combiner.