We present here the first release of the open-source python package ExoTETHyS, which aims to provide a stand-alone set of tools for modeling spectro-photometric observations of the transiting exoplanets. In particular, we describe: (1) a new calculator of stellar limb-darkening coefficients that outperforms the existing software by one order of magnitude in terms of light-curve model accuracy, i.e., down to <10 parts per million (ppm); (2) an exact transit light-curve generator based on the entire stellar intensity profile rather than limb-darkening coefficients. New tools will be added in later releases to model various effects in exoplanetary transits and eclipsing binaries. ExoTETHyS is a reference package for high-precision exoplanet atmospheric spectroscopy with the upcoming JWST and ARIEL missions.

The James Webb Space Telescope (JWST) is expected to revolutionize the field of exoplanets. The broad wavelength coverage and the high sensitivity of its instruments will allow characterization of exoplanetary atmospheres with unprecedented precision. Following the Call for the Cycle 1 Early Release Science Program, the Transiting Exoplanet Community was awarded time to observe several targets, including WASP-43b. The atmosphere of this hot Jupiter has been intensively observed but still harbors some mysteries, especially concerning the day-night temperature gradient, the efficiency of the atmospheric circulation, and the presence of nightside clouds. We will constrain these properties by observing a full orbit of the planet and extracting its spectroscopic phase curve in the 5--12 $\mu$m range with JWST/MIRI. To prepare for these observations, we performed an extensive modeling work with various codes: radiative transfer, chemical kinetics, cloud microphysics, global circulation models, JWST simulators, and spectral retrieval. Our JWST simulations show that we should achieve a precision of 210 ppm per 0.1 $\mu$m spectral bin on average, which will allow us to measure the variations of the spectrum in longitude and measure the night-side emission spectrum for the first time. If the atmosphere of WASP-43b is clear, our observations will permit us to determine if its atmosphere has an equilibrium or disequilibrium chemical composition, providing eventually the first conclusive evidence of chemical quenching in a hot Jupiter atmosphere. If the atmosphere is cloudy, a careful retrieval analysis will allow us to identify the cloud composition.

Alpha Centauri A is the closest solar-type star to the Sun and offers an excellent opportunity to detect the thermal emission of a mature planet heated by its host star. The MIRI coronagraph on JWST can search the 1-3 AU (1"-2") region around alpha Cen A which is predicted to be stable within the alpha Cen AB system. We demonstrate that with reasonable performance of the telescope and instrument, a 20 hr program combining on-target and reference star observations at 15.5 um could detect thermal emission from planets as small as ~5 RE. Multiple visits every 3-6 months would increase the geometrical completeness, provide astrometric confirmation of detected sources, and push the radius limit down to ~3 RE. An exozodiacal cloud only a few times brighter than our own should also be detectable, although a sufficiently bright cloud might obscure any planet present in the system. While current precision radial velocity (PRV) observations set a limit of 50-100 ME at 1-3 AU for planets orbiting alpha Cen A, there is a broad range of exoplanet radii up to 10 RE consistent with these mass limits. A carefully planned observing sequence along with state-of-the-art post-processing analysis could reject the light from alpha Cen A at the level of ~10^-5 at 1"-2" and minimize the influence of alpha Cen B located 7-8" away in the 2022-2023 timeframe. These space-based observations would complement on-going imaging experiments at shorter wavelengths as well as PRV and astrometric experiments to detect planets dynamically. Planetary demographics suggest that the likelihood of directly imaging a planet whose mass and orbit are consistent with present PRV limits is small, ~5%, and possibly lower if the presence of a binary companion further reduces occurrence rates. However, at a distance of just 1.34 pc, alpha Cen A is our closest sibling star and certainly merits close scrutiny.

We present here a reanalysis of the Spitzer Space Telescope phase curves of the hot Jupiter WASP43 b, using the wavelet pixel-Independent Component Analysis, a blind signal-source separation method. The data analyzed were recorded with the InfraRed Array Camera and consisted of two visits at 3.6 $\mu$m, and one visit at 4.5 $\mu$m, each visit covering one transit and two eclipse events. To test the robustness of our technique we repeated the analysis on smaller portions of the phase curves, and by employing different instrument ramp models. Our reanalysis presents significant updates of the planetary parameters compared to those reported in the original phase curve study of WASP43 b. In particular, we found (1) higher nightside temperatures, (2) smaller hotspot offsets, (3) a greater consistency ($\sim$1 $\sigma$) between the two 3.6~$\mu$m visits, and (4) a greater similarity with the predictions of the atmospheric circulation models. Our parameter results are consistent within 1 $\sigma$ with those reported by a recent reanalysis of the same data sets. For each visit we studied the variation of the retrieved transit parameters as a function of various sets of stellar limb-darkening coefficients, finding significant degeneracy between the limb-darkening models and the analysis output. Furthermore, we performed the analysis of the single transit and eclipse events, and we examined the differences between these results with the ones obtained with the whole phase curve. Finally we provide a formula useful to optimize the trade-off between precision and duration of observations of transiting exoplanets.

We highlight how guaranteed time observations (GTOs) and early release science (ERS) will advance understanding of exoplanet atmospheres and provide a glimpse into what transiting exoplanet science will be done with JWST during its first year of operations. These observations of 27 transiting planets will deliver significant insights into the compositions, chemistry, clouds, and thermal profiles of warm-to-hot gas-dominated planets well beyond what we have learned from HST, Spitzer, and other observatories to date. These data and insights will in turn inform our understanding of planet formation, atmospheric transport and climate, and relationships between various properties. Some insight will likely be gained into rocky planet atmospheres as well. JWST will be the most important mission for characterizing exoplanet atmospheres in the 2020s, and this should be considered in assessing exoplanet science for the 2020s and 2030s and future facilities.

The primary objectives of the ExoplANETS-A project are to: establish new knowledge on exoplanet atmospheres; establish new insight on influence of the host star on the planet atmosphere; disseminate knowledge, using online, web-based platforms. The project, funded under the EU's Horizon-2020 programme, started in January 2018 and has a duration ~3 years. We present an overview of the project, the activities concerning the host stars and some early results on the host stars.

By generalizing the theory of convection to any type of thermal and compositional source terms (diabatic processes), we show that thermohaline convection in Earth oceans, fingering convection in stellar atmospheres, and moist convection in Earth atmosphere are deriving from the same general diabatic convective instability. We show also that "radiative convection" triggered by CO/CH4 transition with radiative transfer in the atmospheres of brown dwarfs is analog to moist and thermohaline convection. We derive a generalization of the mixing length theory to include the effect of source terms in 1D codes. We show that CO/CH4 radiative convection could significantly reduce the temperature gradient in the atmospheres of brown dwarfs similarly to moist convection in Earth atmosphere thus possibly explaining the reddening in brown-dwarf spectra. By using idealized two-dimensional hydrodynamic simulations in the Ledoux unstable regime, we show that compositional source terms can indeed provoke a reduction of the temperature gradient. The L/T transition could be explained by a bifurcation between the adiabatic and diabatic convective transports and could be seen as a giant cooling crisis: an analog of the boiling crisis in liquid/steam-water convective flows. This mechanism with other chemical transitions could be present in many giant and earth-like exoplanets. The study of the impact of different parameters (effective temperature, compositional changes) on CO/CH4 radiative convection and the analogy with Earth moist and thermohaline convection is opening the possibility to use brown dwarfs to better understand some aspects of the physics at play in the climate of our own planet.

The Mid-Infrared instrument (MIRI) on board the James Webb Space Telescope will perform the first ever characterization of young giant exoplanets observed by direct imaging in the 5-28 microns spectral range. This wavelength range is key for both determining the bolometric luminosity of the cool known exoplanets and for accessing the strongest ammonia bands. In conjunction with shorter wavelength observations, MIRI will enable a more accurate characterization of the exoplanetary atmospheric properties. Here we consider a subsample of the currently known exoplanets detected by direct imaging and we discuss their detectability with MIRI, either using the coronagraphic or the spectroscopic modes. By using the Exo-REM atmosphere model we calculate the mid-infrared emission spectra of fourteen exoplanets, and we simulate MIRI coronagraphic or spectroscopic observations. Specifically we analyze four coronagraphic observational setups, which depend on (i) the target-star and reference-star offset (0, 3, 14 mas), (ii) the wave-front-error (130, 204 nm rms), (iii) the telescope jitter amplitude (1.6, 7 mas). We then determine the signal-to-noise and integration time values for the coronagraphic targets whose planet-to-star contrasts range from 3.9 to 10.1 mag. We conclude that all the MIRI targets should be observable with different degrees of difficulty, which depends on the final in-flight instrument performances. Furthermore, we test for detection of ammonia in the atmosphere of the coolest targets. Finally, we present the case of HR 8799 b to discuss what MIRI observations can bring to the knowledge of a planetary atmosphere, either alone or in combination with shorter wavelength observations.

The James Webb Space Telescope (JWST) presents the opportunity to transform our understanding of planets and the origins of life by revealing the atmospheric compositions, structures, and dynamics of transiting exoplanets in unprecedented detail. However, the high-precision, time-series observations required for such investigations have unique technical challenges, and prior experience with other facilities indicates that there will be a steep learning curve when JWST becomes operational. In this paper we describe the science objectives and detailed plans of the Transiting Exoplanet Community Early Release Science (ERS) Program, which is a recently approved program for JWST observations early in Cycle 1. The goal of this project, for which the obtained data will have no exclusive access period, is to accelerate the acquisition and diffusion of technical expertise for transiting exoplanet observations with JWST, while also providing a compelling set of representative datasets that will enable immediate scientific breakthroughs. The Transiting Exoplanet Community ERS Program will exercise the time-series modes of all four JWST instruments that have been identified as the consensus highest priorities, observe the full suite of transiting planet characterization geometries (transits, eclipses, and phase curves), and target planets with host stars that span an illustrative range of brightnesses. The observations in this program were defined through an inclusive and transparent process that had participation from JWST instrument experts and international leaders in transiting exoplanet studies. Community engagement in the project will be centered on a two-phase Data Challenge that culminates with the delivery of planetary spectra, time-series instrument performance reports, and open-source data analysis toolkits in time to inform the agenda for Cycle 2 of the JWST mission.

We present infrared (IR) and submillimeter observations of the Crab-like supernova remnant (SNR) G54.1+0.3 including 350 micron (SHARC-II), 870 micron (LABOCA), 70, 100, 160, 250, 350, 500 micron (Herschel) and 3-40 micron (Spitzer). We detect dust features at 9, 11 and 21 micron and a long wavelength continuum dust component. The 21 micron dust coincides with [Ar II] ejecta emission, and the feature is remarkably similar to that in Cas A. The IRAC 8 micron image including Ar ejecta is distributed in a shell-like morphology which is coincident with dust features, suggesting that dust has formed in the ejecta. We create a cold dust map that shows excess emission in the northwestern shell. We fit the spectral energy distribution of the SNR using the continuous distributions of ellipsoidal (CDE) grain model of pre-solar grain SiO2 that reproduces the 21 and 9 micron dust features and discuss grains of SiC and PAH that may be responsible for the 10-13 micron dust features. To reproduce the long-wavelength continuum, we explore models consisting of different grains including Mg2SiO4, MgSiO3, Al2O3, FeS, carbon, and Fe3O4. We tested a model with a temperature-dependent silicate absorption coefficient. We detect cold dust (27-44 K) in the remnant, making this the fourth such SNR with freshly-formed dust. The total dust mass in the SNR ranges from 0.08-0.9 Msun depending on the grain composition, which is comparable to predicted masses from theoretical models. Our estimated dust masses are consistent with the idea that SNe are a significant source of dust in the early Universe.

Given the forthcoming launch of the James Webb Space Telescope (JWST) which will allow observ- ing exoplanet atmospheres with unprecedented signal-over-noise ratio, spectral coverage and spatial resolution, the uncertainties in the atmosphere modelling used to interpret the data need to be as- sessed. As the first step, we compare three independent 1D radiative-convective models: ATMO, Exo-REM and petitCODE. We identify differences in physical and chemical processes taken into ac- count thanks to a benchmark protocol we developed. We study the impact of these differences on the analysis of observable spectra. We show the importance of selecting carefully relevant molecular linelists to compute the atmospheric opacity. Indeed, differences between spectra calculated with Hitran and ExoMol exceed the expected uncertainties of future JWST observations. We also show the limitation in the precision of the models due to uncertainties on alkali and molecule lineshape, which induce spectral effects also larger than the expected JWST uncertainties. We compare two chemical models, Exo-REM and Venot Chemical Code, which do not lead to significant differences in the emission or transmission spectra. We discuss the observational consequences of using equilibrium or out-of- equilibrium chemistry and the major impact of phosphine, detectable with the JWST.Each of the models has benefited from the benchmarking activity and has been updated. The protocol developed in this paper and the online results can constitute a test case for other models.

Atmospheric modeling of low-gravity (VL-G) young brown dwarfs remains a challenge. The presence of very thick clouds has been suggested because of their extremely red near-infrared (NIR) spectra, but no cloud models provide a good fit to the data with a radius compatible with evolutionary models for these objects. We show that cloudless atmospheres assuming a temperature gradient reduction caused by fingering convection provides a very good model to match the observed VL-G NIR spectra. The sequence of extremely red colors in the NIR for atmospheres with effective temperature from ~2000 K down to ~1200 K is very well reproduced with predicted radii typical of young low-gravity objects. Future observations with NIRSPEC and MIRI on the James Webb Space Telescope (JWST) will provide more constrains in the mid-infrared, helping to confirm/refute whether or not the NIR reddening is caused by fingering convection. We suggest that the presence/absence of clouds will be directly determined by the silicate absorption features that can be observed with MIRI. JWST will therefore be able to better characterize the atmosphere of these hot young brown dwarfs and their low-gravity exoplanet analogues.

The James Webb Space Telescope will enable astronomers to obtain exoplanet spectra of unprecedented precision. Especially the MIRI instrument may shed light on the nature of the cloud particles obscuring planetary transmission spectra in the optical and near-infrared. We provide self-consistent atmospheric models and synthetic JWST observations for prime exoplanet targets in order to identify spectral regions of interest and estimate the number of transits needed to distinguish between model setups. We select targets which span a wide range in planetary temperature and surface gravity, ranging from super-Earths to giant planets, and have a high expected SNR. For all targets we vary the enrichment, C/O ratio, presence of optical absorbers (TiO/VO) and cloud treatment. We calculate atmospheric structures and emission and transmission spectra for all targets and use a radiometric model to obtain simulated observations. We analyze JWST's ability to distinguish between various scenarios. We find that in very cloudy planets such as GJ 1214b less than 10 transits with NIRSpec may be enough to reveal molecular features. Further, the presence of small silicate grains in atmospheres of hot Jupiters may be detectable with a single JWST MIRI transit. For a more detailed characterization of such particles less than 10 transits are necessary. Finally, we find that some of the hottest hot Jupiters are well fitted by models which neglect the redistribution of the insolation and harbor inversions, and that 1-4 eclipse measurements with NIRSpec are needed to distinguish between the inversion models. Wet thus demonstrate the capabilities of JWST for solving some of the most intriguing puzzles in current exoplanet atmospheric research. Further, by publishing all models calculated for this study we enable the community to carry out similar or retrieval analyses for all planets included in our target list.

With a scheduled launch in October 2018, the James Webb Space Telescope (JWST) is expected to revolutionise the field of atmospheric characterization of exoplanets. The broad wavelength coverage and high sensitivity of its instruments will allow us to extract far more information from exoplanet spectra than what has been possible with current observations. In this paper, we investigate whether current retrieval methods will still be valid in the era of JWST, exploring common approximations used when retrieving transmission spectra of hot Jupiters. To assess biases, we use 1D photochemical models to simulate typical hot Jupiter cloud-free atmospheres and generate synthetic observations for a range of carbon-to-oxygen ratios. Then, we retrieve these spectra using TauREx, a Bayesian retrieval tool, using two methodologies: one assuming an isothermal atmosphere, and one assuming a parametrized temperature profile. Both methods assume constant-with-altitude abundances. We found that the isothermal approximation biases the retrieved parameters considerably, overestimating the abundances by about one order of magnitude. The retrieved abundances using the parametrized profile are usually within one sigma of the true state, and we found the retrieved uncertainties to be generally larger compared to the isothermal approximation. Interestingly, we found that using the parametrized temperature profile we could place tight constraints on the temperature structure. This opens the possibility to characterize the temperature profile of the terminator region of hot Jupiters. Lastly, we found that assuming a constant-with-altitude mixing ratio profile is a good approximation for most of the atmospheres under study.

Context: Exoplanet science has made staggering progress in the last two decades, due to the relentless exploration of new detection methods and refinement of existing ones. Yet astrometry offers a unique and untapped potential of discovery of habitable-zone low-mass planets around all the solar-like stars of the solar neighborhood. To fulfill this goal, astrometry must be paired with high precision calibration of the detector. Aims: We present a way to calibrate a detector for high accuracy astrometry. An experimental testbed combining an astrometric simulator and an interferometric calibration system is used to validate both the hardware needed for the calibration and the signal processing methods. The objective is an accuracy of 5e-6 pixel on the location of a Nyquist sampled polychromatic point spread function. Methods: The interferometric calibration system produced modulated Young fringes on the detector. The Young fringes were parametrized as products of time and space dependent functions, based on various pixel parameters. The minimization of func- tion parameters was done iteratively, until convergence was obtained, revealing the pixel information needed for the calibration of astrometric measurements. Results: The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than five pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached.

Theia is an astrometric mission proposed to ESA in 2014 for which one of the scientific objectives is detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. This objective requires the capability to measure stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 3e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The Theia consortium is operating a testbed in vacuum in order to achieve 1e-5 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the Theia spacecraft. The testbed consists of two main sub-systems. The first one produces pseudo stars: a blackbody source is fed into a large core fiber and lights-up a pinhole mask in the object plane, which is imaged by a mirror on the CCD. The second sub-system is the metrology, it projects young fringes on the CCD. The fringes are created by two single mode fibers facing the CCD and fixed on the mirror. In this paper we present the latest experiments conducted and the results obtained after a series of upgrades on the testbed was completed. The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than 5 pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached.

The James Webb Space Telescope will revolutionize transiting exoplanet atmospheric science due to its capability for continuous, long-duration observations and its larger collecting area, spectral coverage, and spectral resolution compared to existing space-based facilities. However, it is unclear precisely how well JWST will perform and which of its myriad instruments and observing modes will be best suited for transiting exoplanet studies. In this article, we describe a prefatory JWST Early Release Science (ERS) program that focuses on testing specific observing modes to quickly give the community the data and experience it needs to plan more efficient and successful future transiting exoplanet characterization programs. We propose a multi-pronged approach wherein one aspect of the program focuses on observing transits of a single target with all of the recommended observing modes to identify and understand potential systematics, compare transmission spectra at overlapping and neighboring wavelength regions, confirm throughputs, and determine overall performances. In our search for transiting exoplanets that are well suited to achieving these goals, we identify 12 objects (dubbed "community targets") that meet our defined criteria. Currently, the most favorable target is WASP-62b because of its large predicted signal size, relatively bright host star, and location in JWST's continuous viewing zone. Since most of the community targets do not have well-characterized atmospheres, we recommend initiating preparatory observing programs to determine the presence of obscuring clouds/hazes within their atmospheres. Measurable spectroscopic features are needed to establish the optimal resolution and wavelength regions for exoplanet characterization. Other initiatives from our proposed ERS program include testing the instrument brightness limits and performing phase-curve observations.(Abridged)

The Low Resolution Spectrometer of the MIRI, which forms part of the imager module, will provide R~100 long-slit and slitless spectroscopy from 5 to 12 micron. The design is optimised for observations of compact sources, such as exoplanet host stars. We provide here an overview of the design of the LRS, and its performance as measured during extensive test campaigns, examining in particular the delivered image quality, dispersion, and resolving power, as well as spectrophotometric performance, flatfield accuracy and the effects of fringing. We describe the operational concept of the slitless mode, which is optimally suited to transit spectroscopy of exoplanet atmospheres. The LRS mode of the MIRI was found to perform consistently with its requirements and goals.

In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of 74"x113". The remainder of its nominal 113"x113" field is occupied by the coronagraphs and the low resolution spectrometer. We present the instrument optical and mechanical design. We show that the test data, as measured during the test campaigns undertaken at CEA-Saclay, at the Rutherford Appleton Laboratory, and at the NASA Goddard Space Flight Center, indicate that the instrument complies with its design requirements and goals. We also discuss the operational requirements (multiple dithers and exposures) needed for optimal scientific utilization of the MIRIM.

The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a bright point-source in its vicinity. Such bright sources might include stars that are orbited by exoplanets and circumstellar material, mass-loss envelopes around post-main-sequence stars, the near-nuclear environments in active galaxies, and the host galaxies of distant quasars. This paper describes the coronagraphic observing modes of MIRI, as well as performance estimates based on measurements of the MIRI flight model during cryo-vacuum testing. A brief outline of coronagraphic operations is also provided. Finally, simulated MIRI coronagraphic observations of a few astronomical targets are presented for illustration.

MIRI (the Mid-Infrared Instrument for the James Webb Space Telescope (JWST)) operates from 5 to 28.5 microns and combines over this range: 1.) unprecedented sensitivity levels; 2.) sub-arcsec angular resolution; 3.) freedom from atmospheric interference; 4.) the inherent stability of observing in space; and 5.) a suite of versatile capabilities including imaging, low and medium resolution spectroscopy (with an integral field unit), and coronagraphy. We illustrate the potential uses of this unique combination of capabilities with various science examples: 1.) imaging exoplanets; 2.) transit and eclipse spectroscopy of exoplanets; 3.) probing the first stages of star and planet formation, including identifying bioactive molecules; 4.) determining star formation rates and mass growth as galaxies are assembled; and 5.) characterizing the youngest massive galaxies. This paper is the introduction to a series of ten covering all aspects of the instrument.

The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

The discovery of almost 2000 exoplanets has revealed an unexpectedly diverse planet population. Observations to date have shown that our Solar System is certainly not representative of the general population of planets in our Milky Way. The key science questions that urgently need addressing are therefore: What are exoplanets made of? Why are planets as they are? What causes the exceptional diversity observed as compared to the Solar System? EChO (Exoplanet Characterisation Observatory) has been designed as a dedicated survey mission for transit and eclipse spectroscopy capable of observing a large and diverse planet sample within its four-year mission lifetime. EChO can target the atmospheres of super-Earths, Neptune-like, and Jupiter-like planets, in the very hot to temperate zones (planet temperatures of 300K-3000K) of F to M-type host stars. Over the next ten years, several new ground- and space-based transit surveys will come on-line (e.g. NGTS, CHEOPS, TESS, PLATO), which will specifically focus on finding bright, nearby systems. The current rapid rate of discovery would allow the target list to be further optimised in the years prior to EChO's launch and enable the atmospheric characterisation of hundreds of planets. Placing the satellite at L2 provides a cold and stable thermal environment, as well as a large field of regard to allow efficient time-critical observation of targets randomly distributed over the sky. A 1m class telescope is sufficiently large to achieve the necessary spectro-photometric precision. The spectral coverage (0.5-11 micron, goal 16 micron) and SNR to be achieved by EChO, thanks to its high stability and dedicated design, would enable a very accurate measurement of the atmospheric composition and structure of hundreds of exoplanets.

This article summarizes a workshop held on March, 2014, on the potential of the James Webb Space Telescope (JWST) to revolutionize our knowledge of the physical properties of exoplanets through transit observations. JWST's unique combination of high sensitivity and broad wavelength coverage will enable the accurate measurement of transits with high signal-to-noise. Most importantly, JWST spectroscopy will investigate planetary atmospheres to determine atomic and molecular compositions, to probe vertical and horizontal structure, and to follow dynamical evolution, i.e. exoplanet weather. JWST will sample a diverse population of planets of varying masses and densities in a wide variety of environments characterized by a range of host star masses and metallicities, orbital semi-major axes and eccentricities. A broad program of exoplanet science could use a substantial fraction of the overall JWST mission.

NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The European part of the NEAT consortium is building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. The testbed consists of two main sub-systems. The first one produces pseudo stars: a blackbody source is fed into a large core fiber and lights-up a pinhole mask in the object plane, which is imaged by a mirror on the CCD. The second sub-system is the metrology, it projects young fringes on the CCD. The fringes are created by two single mode fibers facing the CCD and fixed on the mirror. In this paper we present the experiments conducted and the results obtained since July 2013 when we had the first light on both the metrology and pseudo stars. We explain the data reduction procedures we used.

NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The European part of the NEAT consortium is building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. In this paper we present the metrology and the pseudo stellar sources sub-systems, we present a performance model and an error budget of the experiment and we report the present status of the demonstration. Finally we also present our first results: the experiment had its first light in July 2013 and a first set of data was taken in air. The analysis of this first set of data showed that we can already measure the pixel positions with an accuracy of about 1e-4 pixel.

NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. In NEAT, one fundamental aspect is the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 4e-5 pixel at Nyquist sampling. Simulations showed that a precision of 2 micro-pixels can be reached, if intra and inter pixel quantum efficiency variations are calibrated and corrected for by a metrology system. The European part of the NEAT consortium is designing and building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. In this paper we give the basic relations and trade-offs that come into play for the design of a centroid testbed and its metrology system. We detail the different conditions necessary to reach the targeted precision, present the characteristics of our current design and describe the present status of the demonstration.

The NEAT (Nearby Earth Astrometric Telescope) mission is a proposal submitted to ESA for its 2010 call for M-size mission within the Cosmic Vision 2015-2025 plan. The main scientific goal of the NEAT mission is to detect and characterize planetary systems in an exhaustive way down to 1 Earth mass in the habitable zone and further away, around nearby stars for F, G, and K spectral types. This survey would provide the actual planetary masses, the full characterization of the orbits including their inclination, for all the components of the planetary system down to that mass limit. NEAT will continue the work performed by Hipparcos and Gaia by reaching a precision that is improved by two orders of magnitude on pointed targets.

SPICES (Spectro-Polarimetric Imaging and Characterization of Exoplanetary Systems) is a five-year M-class mission proposed to ESA Cosmic Vision. Its purpose is to image and characterize long-period extrasolar planets and circumstellar disks in the visible (450 - 900 nm) at a spectral resolution of about 40 using both spectroscopy and polarimetry. By 2020/22, present and near-term instruments will have found several tens of planets that SPICES will be able to observe and study in detail. Equipped with a 1.5 m telescope, SPICES can preferentially access exoplanets located at several AUs (0.5-10 AU) from nearby stars ($<$25 pc) with masses ranging from a few Jupiter masses to Super Earths ($\sim$2 Earth radii, $\sim$10 M$_{\oplus}$) as well as circumstellar disks as faint as a few times the zodiacal light in the Solar System.

The NEAT (Nearby Earth Astrometric Telescope) mission is a proposition submitted to ESA for its 2010 call for M-size mission. The main scientific goal is to detect and characterize planetary systems in an exhaustive way down to 1 Earth mass in the habitable zone and further away, around nearby stars for F, G, and K spectral types. This survey would provide the actual planetary masses, the full characterization of the orbits including their inclination, for all the components of the planetary system down to that mass limit. Extremely- high-precision astrometry, in space, can detect the dynamical effect due to even low mass orbiting planets on their central star, reaching those scientific goals. NEAT will continue the work performed by Hipparcos (1mas precision) and Gaia (7{\mu}as aimed) by reaching a precision that is improved by two orders of magnitude (0.05{\mu}as, 1{\sigma} accuracy). The two modules of the payload, the telescope and the focal plane, must be placed 40m away leading to a formation flying option studied as the reference mission. NEAT will operate at L2 for 5 years, the telescope satellite moving around the focal plane one to point different targets and allowing whole sky coverage in less than 20 days. The payload is made of 3 subsystems: primary mirror and its dynamic support, the focal plane with the detectors, and the metrology. The principle is to measure the angles between the target star, usually bright (R \leq 6), and fainter reference stars (R \leq 11) using a metrology system that projects dynamical Young's fringes onto the focal plane. The proposed architecture relies on two satellites of about 700 kg, offering a capability of more than 20,000 reconfigurations. The two satellites are launched in a stacked configuration using a Soyuz ST launch, and are deployed after launch to individually perform cruise to their operational Lissajous orbit.

(abridged) A complete census of planetary systems around a volume-limited sample of solar-type stars (FGK dwarfs) in the Solar neighborhood with uniform sensitivity down to Earth-mass planets within their Habitable Zones out to several AUs would be a major milestone in extrasolar planets astrophysics. This fundamental goal can be achieved with a mission concept such as NEAT - the Nearby Earth Astrometric Telescope. NEAT is designed to carry out space-borne extremely-high-precision astrometric measurements sufficient to detect dynamical effects due to orbiting planets of mass even lower than Earth's around the nearest stars. Such a survey mission would provide the actual planetary masses and the full orbital geometry for all the components of the detected planetary systems down to the Earth-mass limit. The NEAT performance limits can be achieved by carrying out differential astrometry between the targets and a set of suitable reference stars in the field. The NEAT instrument design consists of an off-axis parabola single-mirror telescope, a detector with a large field of view made of small movable CCDs located around a fixed central CCD, and an interferometric calibration system originating from metrology fibers located at the primary mirror. The proposed mission architecture relies on the use of two satellites operating at L2 for 5 years, flying in formation and offering a capability of more than 20,000 reconfigurations (alternative option uses deployable boom). The NEAT primary science program will encompass an astrometric survey of our 200 closest F-, G- and K-type stellar neighbors, with an average of 50 visits. The remaining time might be allocated to improve the characterization of the architecture of selected planetary systems around nearby targets of specific interest (low-mass stars, young stars, etc.) discovered by Gaia, ground-based high-precision radial-velocity surveys.

The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard the James Webb Space Telescope (JWST), providing imaging, coronagraphy and spectroscopy over the 5-28 microns band. To verify the optical performance of the instrument, extensive tests were performed at CEA on the flight model (FM) of the Mid-InfraRed IMager (MIRIM) at cryogenic temperatures and in the infrared. This paper reports on the point spread function (PSF) measurements at 5.6 microns, the shortest operating wavelength for imaging. At 5.6 microns the PSF is not Nyquist-sampled, so we use am original technique that combines a microscanning measurement strategy with a deconvolution algorithm to obtain an over-resolved MIRIM PSF. The microscanning consists in a sub-pixel scan of a point source on the focal plane. A data inversion method is used to reconstruct PSF images that are over-resolved by a factor of 7 compared to the native resolution of MIRI. We show that the FWHM of the high-resolution PSFs were 5-10% wider than that obtained with Zemax simulations. The main cause was identified as an out-of-specification tilt of the M4 mirror. After correction, two additional test campaigns were carried out, and we show that the shape of the PSF is conform to expectations. The FWHM of the PSFs are 0.18-0.20 arcsec, in agreement with simulations. 56.1-59.2% of the total encircled energy (normalized to a 5 arcsec radius) is contained within the first dark Airy ring, over the whole field of view. At longer wavelengths (7.7-25.5 microns), this percentage is 57-68%. MIRIM is thus compliant with the optical quality requirements. This characterization of the MIRIM PSF, as well as the deconvolution method presented here, are of particular importance, not only for the verification of the optical quality and the MIRI calibration, but also for scientific applications.

Sagittarius A* (Sgr A*) is the supermassive black hole residing at the center of the Milky Way. It has been the main target of an extensive multiwavelength campaign we carried out in April 2007. Herein, we report the detection of a bright flare from the vicinity of the horizon, observed simultaneously in X-rays (XMM/EPIC) and near infrared (VLT/NACO) on April 4th for 1-2 h. For the first time, such an event also benefitted from a soft gamma-rays (INTEGRAL/ISGRI) and mid infrared (VLT/VISIR) coverage, which enabled us to derive upper limits at both ends of the flare spectral energy distribution (SED). We discuss the physical implications of the contemporaneous light curves as well as the SED, in terms of synchrotron, synchrotron self-Compton and external Compton emission processes.

Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in between two large infrared bubbles and two HII regions. Methods: The region of G327.3-0.6 was imaged at 450 ? m with the CEA P-ArT\'eMiS bolometer array on the Atacama Pathfinder EXperiment telescope in Chile. APEX/LABOCA and APEX-2A, and Spitzer/IRAC and MIPS archives data were used in this study. Results: Ten massive cores were detected in the P-ArT\'eMiS image, embedded within the infrared dark cloud seen in absorption at both 8 and 24 ?m. Their luminosities and masses indicate that they form high-mass stars. The kinematical study of the region suggests that the infrared bubbles expand toward the infrared dark cloud. Conclusions: Under the influence of expanding bubbles, star formation occurs in the infrared dark areas at the border of HII regions and infrared bubbles.

This paper reports measurements of Sgr A* made with NACO in L' -band (3.80 um), Ks-band (2.12 um) and H-band (1.66 um) and with VISIR in N-band (11.88 um) at the ESO VLT, as well as with XMM-Newton at X-ray (2-10 keV) wavelengths. On 4 April, 2007, a very bright flare was observed from Sgr A* simultaneously at L'-band and X-ray wavelengths. No emission was detected using VISIR. The resulting SED has a blue slope (beta > 0 for nuL_nu ~ nu^beta, consistent with nuL_nu ~ nu^0.4) between 12 micron and 3.8 micron. For the first time our high quality data allow a detailed comparison of infrared and X-ray light curves with a resolution of a few minutes. The IR and X-ray flares are simultaneous to within 3 minutes. However the IR flare lasts significantly longer than the X-ray flare (both before and after the X-ray peak) and prominent substructures in the 3.8 micron light curve are clearly not seen in the X-ray data. From the shortest timescale variations in the L'-band lightcurve we find that the flaring region must be no more than 1.2 R_S in size. The high X-ray to infrared flux ratio, blue nuL_nu slope MIR to L' -band, and the soft nuL_nu spectral index of the X-ray flare together place strong constraints on possible flare emission mechanisms. We find that it is quantitatively difficult to explain this bright X-ray flare with inverse Compton processes. A synchrotron emission scenario from an electron distribution with a cooling break is a more viable scenario.

(Abridged) The luminous z=0.286 quasar HE0450-2958 is interacting with a companion galaxy at 6.5 kpc distance and the whole system is a ULIRG. A so far undetected host galaxy triggered the hypothesis of a mostly "naked" black hole (BH) ejected from the companion by three-body interaction. We present new HST/NICMOS 1.6micron imaging data at 0.1" resolution and VLT/VISIR 11.3micron images at 0.35" resolution that for the first time resolve the system in the near- and mid-infrared. We combine these with existing optical HST and CO maps. (i) At 1.6micron we find an extension N-E of the quasar nucleus that is likely a part of the host galaxy, though not its main body. If true, this places HE0450-2958 directly onto the M_BH-M_bulge-relation for nearby galaxies. (ii) HE0450-2958 is consistent with lying at the high-luminosity end of Narrow-Line Seyfert 1 Galaxies, and more exotic explanations like a "naked quasar" are unlikely. (iii) All 11.3micron radiation in the system is emitted by the quasar nucleus, which is radiating at super-Eddington rate, L/L_Edd=6.2+3.8-1.8, or 12 M_sun/yr. (iv) The companion galaxy is covered in optically thick dust and is not a collisional ring galaxy. It emits in the far infrared at ULIRG strength, powered by Arp220-like star formation (strong starburst-like). An M82-like SED is ruled out. (v) With its black hole accretion rate HE0450-2958 produces not enough new stars to maintain its position on the M_BH-M_bulge-relation, and star formation and black hole accretion are spatially disjoint; the bulge has to grow by redistribution of preexisting stars. (vi) Systems similar to HE0450-2958 with spatially disjoint ULIRG-strength star formation and quasar activity are rare. At z<0.43 we only find <4% (3/77) candidates for a similar configuration.

PILOT (the Pathfinder for an International Large Optical Telescope is a proposed 2.5 m optical/infrared telescope to be located at DomeC on the Antarctic plateau. The atmospheric conditions at Dome C deliver a high sensitivity, high photometric precision, wide-field, high spatial resolution, and high-cadence imaging capability to the PILOT telescope. These capabilities enable a unique scientific potential for PILOT, which is addressed in this series of papers. The current paper presents a series of projects dealing with the nearby Universe that have been identified as key science drivers for the PILOT facility. Several projects are proposed that examine stellar populations in nearby galaxies and stellar clusters in order to gain insight into the formation and evolution processes of galaxies and stars. A series of projects will investigate the molecular phase of the Galaxy and explore the ecology of star formation, and investigate the formation processes of stellar and planetary systems. Three projects in the field of exoplanet science are proposed: a search for free-floating low-mass planets and dwarfs, a program of follow-up observations of gravitational microlensing events, and a study of infrared light-curves for previously discovered exoplanets. Three projects are also proposed in the field of planetary and space science: optical and near-infrared studies aimed at characterising planetary atmospheres, a study of coronal mass ejections from the Sun, and a monitoring program searching for small-scale Low Earth Orbit satellite debris items.

PILOT (the Pathfinder for an International Large Optical Telescope) is a proposed 2.5 m optical/infrared telescope to be located at Dome C on the Antarctic plateau. Conditions at Dome C are known to be exceptional for astronomy. The seeing (above ~30 m height), coherence time, and isoplanatic angle are all twice s good as at typical mid-latitude sites, while the water-vapour column, and the atmosphere and telescope thermal emission are all an order of magnitude better. These conditions enable a unique scientific capability for PILOT, which is addressed in this series of papers. The current paper presents an overview of the optical and instrumentation suite for PILO and its expected performance, a summary of the key science goals and observational approach for the facility, a discussion of the synergies between the science goals for PILOT and other telescopes, and a discussion of the future of Antarctic astronomy. Paper II and Paper III present details of the science projects divided, respectively, between the distant Universe (i.e., studies of first light, and the assembly and evolution of structure) and the nearby Universe (i.e., studies of Local Group galaxies, the Milky Way, and the Solar System).

We present high-resolution spectroscopic mid-infrared observations of the circumstellar disk around the Herbig Ae star HD97048 obtained with the VLT Imager and Spectrometer for the mid-InfraRed (VISIR). We conducted observations of mid-infrared pure rotational lines of molecular hydrogen (H2) as a tracer of warm gas in the disk surface layers. In a previous paper, we reported the detection of the S(1) pure rotational line of H2 at 17.035 microns and argued it is arising from the inner regions of the disk around the star. We used VISIR on the VLT for a more comprehensive study based on complementary observations of the other mid-infrared molecular transitions, namely S(2) and S(4) at 12.278 microns and 8.025 microns respectively, to investigate the physical properties of the molecular gas in the circumstellar disk around HD97048. We do not detect neither the S(2) line nor the S(4) H2 line from the disk of HD97048, but we derive upper limits on the integrated line fluxes which allows us to estimate an upper limit on the gas excitation temperature, T_ex < 570 K. This limit on the temperature is consistent with the assumptions previously used in the analysis of the S(1) line, and allows us to set stronger contraints on the mass of warm gas in the inner regions of the disk. Indeed, we estimate the mass of warm gas to be lower than 0.1 M_Jup. We also discuss the probable physical mechanisms which could be responsible of the excitation of H2 in the disk of HD97048.

We report mid-infrared observations of SGR 1806-20 and its environment - with the highest spatial resolution in this domain to date - using ESO/VISIR in 2005 and 2006, and we retrieved Spitzer/IRAC-MIPS archival data of the same field. We aimed at studying the mid-infrared emission of the stars associated with the same cluster as SGR 1806-20, to detect variations that could be due to the high-energy activity of the magnetar through interaction with the dust. We also aimed at studying the morphology of the cloud close to the centre of the cluster. We performed broadband photometry of three stars - LBV 1806-20, a WC9 and an O/B supergiant - on our VISIR images, as well as on the IRAC data. We then built and fitted their broadband spectral energy distributions with a combination of two absorbed black bodies, representing their stellar components, as well as a possible mid-infrared excess, in order to derive their physical parameters. We show that LBV 1806-20 and the WC9 star exhibit a mid-infrared excess, likely because of the presence of circumstellar dust related to their winds. We also show that only LBV 1806-20 had a variable flux over a period of two years, variability which is due to its LBV nature rather than to a heating of the gas and dust cloud by the high-energy emission of SGR 1806-20. Finally, differences in the intrinsic absorptions of the three stars show an inhomogeneous structure of the density of the gas and dust cloud in the massive star cluster.

Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron dust continuum map of the filamentary dense clump associated with NGC 3576. Results: Combining our 450-micron observations with existing data at other wavelengths, we have identified seven massive protostellar sources along the NGC 3576 filament and placed them in the M_env - L_bol evolutionary diagram for protostars. Conclusions: Comparison with theoretical evolutionary tracks suggests that these seven protostellar sources will evolve into massive stars with masses M* ~ 15-50 Msun. Four sources are classified as candidate high-mass Class 0 objects, two sources as massive Class I objects, and one source appears to be at an intermediate stage.

Context: Molecular hydrogen (H2) is the most abundant molecule in the circumstellar (CS) environments of young stars, and is a key element in giant planet formation. The measurement of the H2 content provides the most direct probe of the total amount of CS gas, especially in the inner warm planet-forming regions of the disks. Aims: Most Herbig Be stars (HBes) are distant from the Sun and their nature and evolution are still debated. We therefore conducted mid-infrared observations of H2 as a tracer of warm gas around HBes known to have gas-rich CS environments. Methods: We report a search for the H2 S(1) emission line at 17.0348 microns in the CS environments of 5 HBes with the high resolution spectroscopic mode of VISIR (ESO VLT Imager and Spectrometer for the mid-InfraRed). Results: No source shows evidence for H2 emission at 17.0348 microns. Stringent 3sigma upper limits on the integrated line fluxes are derived. Depending on the adopted temperature, limits on column densities and masses of warm gas are also estimated. These non-detections constrain the amount of warm (>150 K) gas in the immediate CS environments of our target stars to be less than 1-10 Jupiter masses.

In a previous work, three bright MIR/radio sources were discovered in the nuclear region of NGC1365. We here confirm that these sources are young and massive ``embedded'' clusters, and derive their parameters, such as extinction, age and mass. Using ISAAC and VISIR at the VLT we obtained NIR and MIR maps and LR spectra. The dataset is first interpreted by comparing the observations with images and spectra of the close-by young cluster R136 in the LMC and then by using model predictions for both the nebular emission lines and the spectral energy distribution of the sources. We produce maps of the region containing the three sources in the R, J, Ks, L' bands and at 12.8micro. We also provide spectra in K, L and N. The spectral energy distribution of the three sources rises with wavelength. Emission lines from ionised hydrogen and molecular hydrogen are detected, as well as PAH emission. Conspicuous [NeII]12.8 line is also present, while neither the [ArIII] 8.9 nor the [SIV] 10.4 lines are detected. This provides a stringent constraint on the age of the sources: they are relatively evolved young clusters (6-8 Myr). Owing to their ionising photon rates and ages, they must be extremely massive clusters (around 10^7 solar masses). Their MIR spectral energy distribution suggests the presence of two components: (1) an optically thin component, with a continuum comparable to that of R136, and (2) an optically thick component which might be related to subsequent or on-going episodes of star formation. These sources are good candidates for evolving according to a bi-modal hydrodynamical regime, in which matter is trapped at the centre of a compact and massive cluster.

METIS, the Mid-infrared ELT Imager and Spectrograph (formerly called MIDIR), is a proposed instrument for the European Extremely Large Telescope (E-ELT), currently undergoing a phase-A study. The study is carried out within the framework of the ESO-sponsored E-ELT instrumentation studies. METIS will be designed to cover the E-ELT science needs at wavelengths longward of 3um, where the thermal background requires different operating schemes. In this paper we discuss the main science drivers from which the instrument baseline has been derived. Specific emphasis has been given to observations that require very high spatial and spectral resolution, which can only be achieved with a ground-based ELT. We also discuss the challenging aspects of background suppression techniques, adaptive optics in the mid-IR, and telescope site considerations. The METIS instrument baseline includes imaging and spectroscopy at the atmospheric L, M, and N bands with a possible extension to Q band imaging. Both coronagraphy and polarimetry are also being considered. However, we note that the concept is still not yet fully consolidated. The METIS studies are being performed by an international consortium with institutes from the Netherlands, Germany, France, United Kingdom, and Belgium.

Dust enshrouded activity can ideally be studied by mid-infrared (MIR) observations. In order to explore the AGN versus star forming origin of the nuclear MIR emission of galaxies, observations of high spatial resolution are required. Here we report on 11.3mic. observations with VISIR at the VLT, reaching 0.35'' spatial resolution (FWHM). During the scientific verification of VISIR we have observed a sample of 36 nearby galaxies having a variety of optically classified nuclear activity: 17 black hole driven active galactic nuclei (AGN), 10 starbursts (SBs) and 9 quiet spirals. 16/17 AGN are detected and unresolved, 5/10 SBs are detected and resolved with structured emission up to a few arcsec, while for 5/10 SB and all 9 quiet nuclei low upper limits are provided. The morphology of the resolved SB nuclei follows that seen at radio frequencies. The compactness of AGN and the extent of the SB nuclei is consistent with predictions from radiative transfer models and with MIR spectra of lower spatial resolution. We explore the nuclear MIR surface brightness as a quantitative measure. While AGN and SB cannot be distinguished with MIR data from 4m class telescopes, our data provide evidence that, up to a distance of 100 Mpc, AGN and SB can well be separated by means of MIR surface brightness when using 8m class telescopes.

Preliminary site testing datasets suggest that Dome C in Antarctica is one of the best sites on Earth for astronomical observations in the 200 to 500 micron regime, i.e. for far-infrared (FIR) and submillimetre (submm) astronomy. We present an overview of potential science cases that could be addressed with a large telescope facility at Dome C. This paper also includes a presentation of the current knowledge about the site characterics in terms of atmospheric transmission, stability, sky noise and polar constraints on telescopes. Current and future site testing campaigns are finally described.

Context: The INTEGRAL mission has led to the discovery of a new type of supergiant X-ray binaries (SGXBs), whose physical properties differ from those of previously known SGXBs. Those sources are in the course of being unveiled by means of multi-wavelength X-rays, optical, near- and mid-infrared observations, and two classes are appearing. The first class consists of obscured persistent SGXBs and the second is populated by the so-called supergiant fast X-ray transients (SFXTs). Aims: We report here mid-infrared (MIR) observations of the companion stars of twelve SGXBs from these two classes in order to assess the contribution of the star and the material enshrouding the system to the total emission.} Methods: We used data from observations we carried out at ESO/VLT with VISIR, as well as archival and published data, to perform broad-band spectral energy distributions of the companion stars and fitted them with a combination of two black bodies representing the star and a MIR excess due to the absorbing material enshrouding the star, if there was any. Results: We detect a MIR excess in the emission of IGR J16318-4848, IGR J16358-4726, and perhaps IGR J16195-4945. The other sources do not exhibit any MIR excess even when the intrinsic absorption is very high. (abridged)

We present high resolution spectroscopic mid-infrared observations of the circumstellar disk around the Herbig Ae star HD97048 with the VLT Imager and Spectrometer for the mid-InfraRed (VISIR). We detect the S(1) pure rotational line of molecular hydrogen (H2) at 17.035 microns arising from the disk around the star. This detection reinforces the claim that HD97048 is a young object surrounded by a flared disk at an early stage of evolution. The emitting warm gas is located within the inner 35 AU of the disk. The line-to-continuum flux ratio is much higher than expected from models of disks at local thermodynamics equilibrium. We investigate the possible physical conditions, such as a gas-to-dust mass ratio higher than 100 and different excitation mechanisms of molecular hydrogen (X-ray heating, shocks, ...) in order to explain the detection. We tentatively estimate the mass of warm gas to be in the range from 0.01 to nearly 1 Jupiter Mass. Further observations are needed to better constrain the excitation mechanisms as well as the mass of gas.

Half of the Seyfert-2 galaxies escaped detection of broad lines in their polarised spectra observed so far. Some authors have suspected that these non-HBLRs contain real Sy2 nuclei without intrinsic broad line region hidden behind a dust torus. If this were true, then their nuclear structure would fundamentally differ from that of Sy2s with polarised broad lines: in particular, they would not be explained by orientation-based AGN unification. Further arguments for two physically different Sy2 populations have been derived from the warm and cool IRAS F25/F60 ratios. These ratios, however, refer to the entire host galaxies and are unsuitable to conclusively establish the absence of a nuclear dust torus. Instead, a study of the Seyfert-2 dichotomy should be performed on the basis of nuclear properties only. Here we present the first comparison between [OIII] 5007A and mid-infrared imaging at matching spatial resolution. Exploring the Seyfert-2 dichotomy we find that the distributions of nuclear mid-infrared/[OIII] luminosity ratios are indistinguishable for Sy1s and Sy2s with and without detected polarised broad lines and irrespective of having warm or cool IRAS F25/F60 ratios. We find no evidence for the existence of a population of real Sy2s with a deficit of nuclear dust emission. Our results suggest 1) that all Seyfert nuclei possess the same physical structure including the putative dust torus and 2) that the cool IRAS colours are caused by a low contrast of AGN to host galaxy. Then the Seyfert-2 dichotomy is explained in part by unification of non-HBLRs with narrow-line Sy1s and to a larger rate by observational biases caused by a low AGN/host contrast and/or an unfavourable scattering geometry.

We present 12.8 microns images of the core of NGC 1068 obtained with the BURST mode of the VLT/VISIR. We trace structures under the diffraction limit of one UT and we investigate the link between dust in the vicinity of the central engine of NGC 1068, recently resolved by interferometry with MIDI, and more extended structures. This step is mandatory for a multi-scale understanding of the sources of mid-infrared emission in AGNs. A speckle processing of VISIR BURST mode images was performed to extract very low spatial-frequency visibilities, first considering the full field of VISIR BURST mode images and then limiting it to the mask used for the acquisition of MIDI data. Extracted visibilities are reproduced with a multi-component model. We identify two major sources of emission: one compact < 85 mas, associated with the dusty torus, and an elliptical one, (< 140) mas x 1187 mas at P.A.=-4 degrees from N to E. This is consistent with previous deconvolution processes. The combination with MIDI data reveals the close environment of the dusty torus to contribute to about 83 percent of the MIR flux seen by MIDI. This strong contribution has to be considered in modeling long baseline interferometric data. It must be related to the NS elongated component which is thought to originate from individually unresolved dusty clouds and is located inside the ionization cone. Low temperatures of the dusty torus are not challenged, emphasizing the scenarios of clumpy torus.

Submillimetre/TeraHertz (e.g. 200, 350, 450 microns) astronomy is the prime technique to unveil the birth and early evolution of a broad range of astrophysical objects. A major obstacle to carry out submm observations from ground is the atmosphere. Preliminary site testing and atmospheric transmission models tend to demonstrate that Dome C could offer the best conditions on Earth for submm/THz astronomy. The CAMISTIC project aims to install a filled bolometer-array camera with 16x16 pixels on IRAIT at Dome C and explore the 200-$\mu$m windows for potential ground-based observations.

We present a speckle analysis of the active galactic nucleus (AGN) inside the archetype Seyfert type 2 galaxy NGC 1068. This study is based on 12.8 microns images obtained with the burst mode of VISIR (the Very Large Telescope Imager and Spectrometer in the InfraRed). The interferometric processing allows to push the resolution far below the diffraction limit of a 8m telescope in the N-band and to trace two main contributions to the mid-IR flux inside the nucleus. It also allows to partially fill the lack of visibility points at low spatial frequencies. The confrontation with VLT/MIDI (the Mid-InfrareD Interferometer) data points helps to establish the link between dust in the vicinity of the central engine and inside the ionisation cone to get a multi-scale picture of mid-IR sources emitting in the nucleus of NGC 1068.

We present a new mode of observations with VISIR, the mid-InfraRed (mid-IR) imager and spectrometer on the VLT (ESO, Chile): the so-called BURST mode. This mode allows to reach the diffraction limit of the telescope. To illustrate results obtained with this mode, we discuss observations of disks around Herbig Ae stars. These stars are the more massive analogues of T Tauri stars and are believed to harbour circumstellar disks. The 10-20 microns atmospheric windows are well-suited to study the extended emission of these objects. With a 8 m class telescope, in fair seeing conditions, the observations are diffraction-limited at 10 microns and the spatial resolution could reach the diffraction limit of 0.3 arcsec. As a result, it is possible to resolve disks with a typical size of 100 AU around objects at a distance of 100 pc. We present here a significant example, HD97048, for which a flared disk of 350 AU is resolved at 11.3 microns (PAH band).

Planet formation has been known for many years to be tied to the spatial distribution of gas and dust in disks around young stars. To constrain planet formation models, imaging observations of protoplanetary disks are required. In this framework, we have undertaken a mid-infrared imaging survey of Herbig Ae stars, which are pre-main sequence stars of intermediate mass still surrounded by a large amount of circumstellar material. The observations were made at a wavelength of 20.5 $\mu$m with the CAMIRAS camera mounted at the Cassegrain focus of the Canada France Hawaii Telescope. We report the observations of three stars, HD135344, CQTau and HD163296. The circumstellar material around the three objects is spatially resolved. The extensions feature a disk like shape. The images provide direct information on two key parameters of the disk : its inclination and its outer radius. The outer radius is found to be quite different from the one deduced from disk models only constrained by fitting the Spectral Energy Distribution of the object. Other parameters of the disk, such as flaring, dust mass have been deduced from fitting both the observed extension and the spectral energy distribution with sophisticated disk models. Our results show how important imaging data are to tighten constraints on the disk model parameters.

We have observed a bright flare of Sgr A* in the near infrared with the adaptive optics assisted integral field spectrometer SINFON. Within the uncertainties, the observed spectrum is featureless and can be described by a power law. Our data suggest that the spectral index is correlated with the instantaneous flux and that both quantities experience significant changes within less than one hour. We argue that the near infrared flares from Sgr A* are due to synchrotron emission of transiently heated electrons, the emission being affected by orbital dynamics and synchrotron cooling, both acting on timescales of ~20 minutes.

High resolution mid-infrared (MIR) images of the central region of NGC1068 have been obtained with VISIR, the multi-mode MIR instrument recently installed at the ESO/VLT on Paranal. A map of the emission at 12.8mic with increased sensitivity over the central 8"x 8" area is discussed. It shows a central core (unresolved along the E-W direction) and an extended emission which draws a spiral pattern similar to that observed on near-infrared images. Patches of MIR emission can be detected up to a distance of 4" from the core. The deconvolved 12.8mic map is fully consistent with previous high-resolution MIR observations. It highlights the structure of the extended emission, already seen on the un-deconvolved image, and allows to identify a set of mid-infrared sources: 7 in the NE quadrant and 5 in the SW quadrant. The MIR emission map is compared with those obtained at comparable angular resolution in the near-infrared and in the [OIII] line emission. The very good correlation between the VISIR map and the HST optical map supports the idea that the MIR emission not associated with the torus arises from dust associated with the narrow line region clouds. The N-S extension of the MIR core (0.44") is then probably simply due to the mixing of the MIR emission from the dusty torus and the MIR emission from NLR cloud B, located only 0.1" to the North.

High resolution, mid-infrared (MIR) images of a set of nine nearby active galaxies are presented. The data were obtained with the TIMMI2 instrument mounted at the ESO 3.6m telescope using a set of N-band narrow filters. The resulting images have an angular resolution of 0.6"-1". The MIR emission has been resolved in four galaxies: NGC253, NGC1365, NGC1808 and NGC7469. The images unveil a circumnuclear population of unknown MIR sources in NGC1365 and NGC1808, coincident with radio sources. These MIR/radio sources are interpreted in terms of embedded young star clusters. A high-resolution MIR map of NGC253 is also presented, and enables the identification of a previously unknown MIR counterpart to the radio nucleus. Extended MIR emission is detected in NGC7469, and concurs with previous observations in the NIR and radio. For this source, an interesting morphological difference between the 10.4mic and the 11.9mic emission is observed, suggesting the presence of a dust-rich micro-bar. Our MIR images of Circinus do not show resolved emission from the nucleus down to an angular scale of 0.5". In the case of NGC2992, an upper limit to the extended MIR emission can be set. Finally, we provide new MIR flux measurements for the unresolved AGN in NGC5995, IZw1 and IIZw136.

Isolated HAEBE stars are believed to represent an intermediate stage of objects between young stellar objects surrounded by massive, optically thick, gaseous and dusty disks and Vega like stars surrounded by debris disks. The star AB Aur is already known for being surrounded by an intermediate-stage dust disk emitting a fairly large infrared and (sub-)millimetric excess. Until now, the outer disk structure has only been resolved at millimeter wavelengths and at optical wavelength coronographic imaging. We have obtained 20 microns images which show an unexpected ellipse-shaped disk structure in emission at a distance of about 260 AU from the central star. Large azimuthal asymmetries in brightness can be noticed and the center of the ellipse does not coincide with the star. A simple, pure geometrical model based on an emission ring of uniform surface brightness, but having an intrinsic eccentricity succeeds in fitting the observations. These observations give for the first time clues on a very peculiar structure of pre-main-sequence disk geometry, i.e. a non uniform increase in the disk thickness unlike the common usual sketch of a disk with a constant flaring angle. They provide also valuable informations on the disk inclination as well as its dust composition; at such a large distance from the star, only transient heating of very small particles can explain such a bright ring of emission at mid-infrared wavelengths. Finally, the increase of thickness inferred by the model could be caused by disk instabilities; the intrinsic eccentricity of the structure might be a clue to the presence of a massive body undetected yet.

New observations of the supernova remnant 3C391 are in the H2 2.12 micron and [Fe II] 1.64 micron narrow-band filters at the Palomar 200-inch telescope, and in the 5-15 micron CVF on ISOCAM. Shocked H2 emission was detected from the region 3C391:BML, where broad millimeter CO and CS lines had previously been detected. A new H2 clump was confirmed to have broad CO emission, demonstrating that the near-infrared H2 images can trace previously undetected molecular shocks. The [Fe II] emission has a significantly different distribution, being brightest in the bright radio bar, at the interface between the supernova remnant and the giant molecular cloud, and following filaments in the radio shell. The near-infrared [Fe II] and the mid-infrared 12-18 micron filter images are the first images to reveal the radiative shell of 3C391. The mid-infrared spectrum is dominated by bright ionic lines and H2 S(2) through S(7). There are no aromatic hydrocarbons associated with the shocks, nor is their any mid-infrared continuum, suggesting that macromolecules and very small grains are destroyed. Comparing 3C391 to the better-studied IC443, both remnants have molecular- and ionic-dominated regions; for 3C391, the ionic-dominated region is the interface into the giant molecular cloud, showing that the main bodies of giant molecular clouds contain significant regions with densities 100 to 1000/cm^3 and a small filling factor with higher-density. The molecular shocked region resolves into 16 clumps of H2 emission, with some fainter diffuse emission but with no associated near-infrared continuum sources. One of the clumps is coincident with a previously-detected OH 1720 MHz maser. These clumps are interpreted as a cluster of pre-stellar, dense molecular cores that are presently being shocked by the supernova blast wave.

We report here the first resolved images of the circumstellar dust disk around the Pre-Main-Sequence star HD 100546. These near-infrared images were obtained in J and short K bands with the adaptive optics system ADONIS at the ESO observatory. A bright disk extending 2 arcsec (200 AU) far from the star and viewed with an inclination with respect to the line of sight around 50 degrees is revealed by the observations. Using a simplified model of light scattering, we find that the dust disk density peaks at a distance of 40 AU from the star, and the FWHM of this dense ring is typically 20 AU. This type of disk is believed to be a denser precursor of beta Pictoris-like main-sequence disks. The structure of the disk is compared with the best known example of the class of ``debris disks'', the disk surrounding beta Pictoris.

We present diffraction-limited IR images at 11.2 and 20.5 microns of the central 6''x6'' region in NGC 1068, collected with the CAMIRAS instrument mounted at the f/36 IR focus of the CFHT/Hawaii 3.6m telescope and at the f/35 IR focus of the ESO/La Silla 3.6m telescope, respectively. After deconvolution, the achieved resolution (0.6'') reveals a prominent central core emitting about 95 % of the total flux at these wavelengths, as well as extended emission, to the South-West and to the North-East, broken into patchy components which are particularly conspicuous at 20.5 microns and can be isolated as individual clouds. The central core shows an East-West FWHM of 0.6'' (hence unresolved) and a North-South FWHM of 0.9'' corresponding to a resolved full size extension of abound 100 pc. Such an elongated shape is in agreement with model predictions of a dusty/molecular torus surrounding the central engine in NGC 1068, observed under an inclination angle around 65 degrees.

Thanks to mid-infrared observations, we provide new clues to the element mixing during a supernova explosion by probing the mixing between three adjacent layers: the oxygen burning products layer (sulfur, argon,...), the silicate layer and the neon layer. The silicate and neon layers are both contaminated by sulfur and argon in a macroscopic way, but appear segregated, so that the mixing is heterogeneous. This finding complements the microscopic mixing information deduced from presolar grains found in meteorites and implies that, at present time, supernovae are probably not the main dust factory in the Galaxy. The mixing is often interpreted in terms of hydrodynamical instabilities driven by the outward shock following the implosion of the supernova core. Testing whether such instabilities can lead to the injection of material from a layer into upper layers without complete mixing, as suggested by the observations presented in this paper, should be possible with the intense lasers which are starting to be used to simulate astrophysical plasmas.

We calculate particle spectra and continuum photon emission from the Cassiopeia A supernova remnant (SNR). The particle spectra, ion and electron, result from diffusive shock acceleration at the forward SNR shock and are determined with a nonlinear Monte Carlo calculation. The calculation self-consistently determines the shock structure under the influence of ion pressure, and includes a simple parameterized treatment of electron injection and acceleration. Our results are compared to photon observations, concentrating on the connection between the Radio and GeV-TeV gamma-ray range, and to cosmic ray ion observations. We include new upper limits from the Cherenkov Array at Themis (CAT) imaging Cherenkov telescope and the Whipple 10m gamma-ray telescope at > 400 GeV. These new limits support the suggestion (e.g. Cowsik & Sarkar 1980; Allen et. al. 1997) that energetic electrons are emitting synchrotron radiation in an extremely high magnetic field (~ 1000 microGauss), far greater than values routinely assigned to the ISM, and help to constrain our model. The large magnetic field allows acceleration of cosmic ray ions to well above $10^{15}$ eV per nucleon in the ~ 300 yr lifetime of Cas A.

We have observed the Blue Compact Dwarf (BCD) galaxy He 2-10 in the 10 microns mid-infrared (MIR) atmospheric window using broad-band filters centered at lambda=10.1 microns and lambda=11.65 microns. In both filters, only the galaxy's central regions were detected. One of the UV emitting regions is not detected, implying an older age. The central region contains two resolved components which have the same MIR properties but different Halpha fluxes. We interpret these properties in terms of differing star forming histories. Based on its morphology, we show that the MIR emission is unambiguously associated with the young massive stars. We study the spatial variations of the MIR color and conclude that they imply the existence of a hot grain contribution to the 11.65 microns flux in the central regions of the starburst. We also present a new single-dish measurement of the HI content of He 2-10.