We summarize some of the compelling new scientific opportunities for understanding stars and stellar systems that can be enabled by sub-milliarcsec (sub-mas) angular resolution, UV-Optical spectral imaging observations, which can reveal the details of the many dynamic processes (e.g., evolving magnetic fields, accretion, convection, shocks, pulsations, winds, and jets) that affect stellar formation, structure, and evolution. These observations can only be provided by long-baseline interferometers or sparse aperture telescopes in space, since the aperture diameters required are in excess of 500 m (a regime in which monolithic or segmented designs are not and will not be feasible) and since they require observations at wavelengths (UV) not accessible from the ground. Such observational capabilities would enable tremendous gains in our understanding of the individual stars and stellar systems that are the building blocks of our Universe and which serve as the hosts for life throughout the Cosmos.

High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of developing strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.

Optical stellar interferometers have demonstrated milli-arcsecond resolution with few apertures spaced hundreds of meters apart. To obtain rich direct images, many apertures will be needed, for a better sampling of the incoming wavefront. The coherent imaging thus achievable improves the sensitivity with respect to the incoherent combination of successive fringed exposures. Efficient use of highly diluted apertures for coherent imaging can be done with pupil densification, a technique also called 'hypertelescope imaging'. Although best done with adaptive phasing, concentrating most energy in a dominant interference peak for a rich direct image of a complex source, such imaging is also possible with random phase errors such as caused by turbulent 'seeing', using methods such as speckle imaging which uses several short exposure images to reconstruct the true image. We have simulated such observations using an aperture which changes through the night, as naturally happens on Earth with fixed grounded mirror elements, and find that reconstructed images of star clusters and extended objects are of high quality. As part of the study we also estimated the required photon levels for achieving a good signal to noise ratio using such a technique.

Optical interferometry has been successful at achieving milliarcsecond resolution on bright stars. Imaging performance can improve greatly by increasing the number of baselines, which has motivated proposals to build large (~ 100 m) optical interferometers with tens to hundreds of telescopes. It is also desirable to adaptively correct atmospheric turbulence to obtain direct phased images of astrophysical sources. When a natural guide star is not available, we investigate the feasibility of using a modified laser-guide-star technique that is suitable for large diluted apertures. The method consists of using sub-sets of apertures to create an array of artificial stars in the sodium layer and collecting back-scattered light with the same sub-apertures. We present some numerical and laboratory simulations that quantify the requirements and sensitivity of the technique.

The Stellar Imager mission concept is a space-based UV/Optical interferometer designed to resolve surface magnetic activity and subsurface structure and flows of a population of Sun-like stars, in order to accelerate the development and validation of a predictive dynamo model for the Sun and enable accurate long-term forecasting of solar/stellar magnetic activity.

In a previous paper, we discussed an original solution to improve the performances of coronagraphs by adding, in the optical scheme, an adaptive hologram removing most of the residual speckle starlight. In our simulations, the detection limit in the flux ratio between a host star and a very near planet (5 lambda/D) improves over a factor 1000 (resp. 10000) when equipped with a hologram for cases of wavefront bumpiness imperfections of lambda/20 (resp. lambda/100). We derive, in this paper, the transmission accuracy required on the hologram pixels to achieve such goals. We show that preliminary tests could be performed on the basis of existing technologies.

Aims. We present a solution to improve the performance of coronagraphs for the detection of exo-planets. Methods. We simulate numerically several kinds of coronagraphic systems, with the aim of evaluating the gain obtained with an adaptive hologram. Results. The detection limit in flux ratio between a star and a planet (Fs/Fp) observed with an apodized Lyot coronagraph characterized by wavefront bumpiness imperfections of lambda/20 (resp. lambda/100) turns out to be increased by a factor of 10^3.4 (resp. 10^5.1) when equipped with a hologram. Conclusions. This technique could provide direct imaging of an exo-Earth at a distance of 11 parsec with a 6.5m space telescope such as the JWST with the optical quality of the HST.

We summarize some of the compelling new scientific opportunities for understanding stars and stellar systems that can be enabled by sub-mas angular resolution, UV/Optical spectral imaging observations, which can reveal the details of the many dynamic processes (e.g., variable magnetic fields, accretion, convection, shocks, pulsations, winds, and jets) that affect their formation, structure, and evolution. These observations can only be provided by long-baseline interferometers or sparse aperture telescopes in space, since the aperture diameters required are in excess of 500 m - a regime in which monolithic or segmented designs are not and will not be feasible - and since they require observations at wavelengths (UV) not accessible from the ground. Two mission concepts which could provide these invaluable observations are NASA's Stellar Imager (SI; http://hires.gsfc.nasa.gov/si/) interferometer and ESA's Luciola sparse aperture hypertelescope, which each could resolve hundreds of stars and stellar systems. These observatories will also open an immense new discovery space for astrophysical research in general and, in particular, for Active Galactic Nuclei (Kraemer et al. Decadal Survey Science Whitepaper). The technology developments needed for these missions are challenging, but eminently feasible (Carpenter et al. Decadal Survey Technology Whitepaper) with a reasonable investment over the next decade to enable flight in the 2025+ timeframe. That investment would enable tremendous gains in our understanding of the individual stars and stellar systems that are the building blocks of our Universe and which serve as the hosts for life throughout the Cosmos.

We show star images obtained with a miniature ``densified pupil imaging interferometer'' also called a hyper-telescope. The formation of such images violates a ``golden rule of imaging interferometers'' which appeared to forbid the use of interferometric arrangements differing from a Fizeau interferometer. These produce useless images when the sub-apertures spacing is much wider than their size, owing to diffraction through the sub-apertures. The hyper-telescope arrangement solves these problems opening the way towards multi-kilometer imaging arrays in space. We experimentally obtain an intensity gain of 24 +- 3X when a densified-pupil interferometer is compared to an equivalent Fizeau-type interferometer and show images of the double star alpha Gem. The initial results presented confirm the possibility of directly obtaining high resolution and high dynamic range images in the recombined focal plane of a large interferometer if enough elements are used.

Diluted arrays of many optical apertures will be able to provide h igh-resolution snapshot images if the beams are combined according to the densified-pupil scheme. We show that the same principle can also provide coronagraphic images, for detecting faint sources near a bright unresolved one. Recent refinements of coronagraphic techniques, i.e. the use of a phase mask, active apodization and dark-speckle analysis, are also applicable for enhanced contrast. Implemented in the form of a proposed 50-500m Exo-Earth Discoverer array in space, the principle can serve to detect Earth-like exo-planets in the infra-red. It can also provide images of faint nebulosity near stars, active galactic nuclei and quasars. Calculations indicate that exo-planets are detectable amidst the zodiacal and exo-zodiacal emission faster than with a Bracewell array of equivalent area, a consequence of the spatial selectivity in the image.

The dark-speckle method (Labeyrie 1995) combines features of speckle interferometry and adaptive optics to provide images of faint circumstellar material. We present preliminary results of observations, and simulations concluding to the feasibility of exo-planet imaging from the ground. Laboratory simulations with an avalanche photodiode indicate the detectability of a stellar companion of relative intensity 10^{-6} at 5 Airy radii from the star. New, more general, expressions for the signal-to-noise ratio and integration time are given. Comparisons with direct long-exposure imaging indicate that the method improves the detectability of circumstellar nebulosity, faint companions and planets.

In the recent years, interferometric arrays of optical telescopes have reached sizes of the order of 100m, but they have yet to produce high-resolution images. The analysis of image formation now shows that such images are obtainable directly in the recombined focal plane, if there are enough telescopes. Resolved images of extra-solar planets are in principle obtainable with 10km ground-based arrays.