Context. Asymptotic giant branch stars are cool luminous evolved stars that are well observable across the Galaxy and populating Gaia data. They have complex stellar surface dynamics Aims. On the AGB star CL Lac, it has been shown that the convection-related variability accounts for a substantial part of the Gaia DR2 parallax error. We observed this star with the MIRC-X beam combiner installed at the CHARA interferometer to detect the presence of stellar surface inhomogeneities. Methods. We performed the reconstruction of aperture synthesis images from the interferometric observations at different wavelengths. Then, we used 3D radiative hydrodynamics simulations of stellar convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps in the spectral channels of MIRC-X observations. Then, we determined the stellar radius and compared the 3D synthetic maps to the reconstructed ones focusing on matching the intensity contrast, the morphology of stellar surface structures, and the photocentre position at two different spectral channels, 1.52 and 1.70 micron, simultaneously. Results. We measured the apparent diameter of CL Lac at two wavelengths and recovered the radius using a Gaia parallax. In addition to this, the reconstructed images are characterised by the presence of a brighter area that largely affects the position of the photocentre. The comparison with 3D simulation shows good agreement with the observations both in terms of contrast and surface structure morphology, meaning that our model is adequate for explaining the observed inhomogenities. Conclusions. This work confirms the presence of convection-related surface structures on an AGB star of Gaia DR2. Our result will help us to take a step forward in exploiting Gaia measurement uncertainties to extract the fundamental properties of AGB stars using appropriate RHD simulations.

In young multiple stellar systems the gravitational influence of the stars shapes the circumstellar disk, controlling accretion and the material available for planet formation. Our observations of the triple system GW Orionis provide direct evidence for disk tearing, where the gravitational torques due to misaligned disk/orbit planes warp the disk and break the inner disk into precessing rings. We image an eccentric ring that is misaligned with respect to the orbital planes and outer disk, and casts shadows on the strongly warped intermediate disk. Our ring/warp geometry constraints and the fully characterized perturber orbits make the system a potential Rosetta Stone for studying disk hydrodynamics. The ring might offer suitable conditions for planet formation, providing a mechanism for forming wide-separation planets on highly oblique orbits.

T Tauri stars are low-mass young stars whose disks provide the setting for planet formation. Despite this, their structure is poorly understood. We present new infrared interferometric observations of the SU Aurigae circumstellar environment that offer 3 x higher resolution and better baseline position angle coverage over previous observations. We investigate the characteristics of circumstellar material around SU Aur, constrain the disk geometry, composition and inner dust rim structure. The CHARA array offers opportunities for long baseline observations, with baselines up to 331 m. Using the CLIMB 3-telescope combiner in the K-band allows us to measure visibilities as well as closure phase. We undertook image reconstruction for model-independent analysis, and geometric modeling. Additionally, the fitting of radiative transfer models constrains the physical parameters of the disk. For the first time, a dusty disk wind is introduced to the radiative transfer code TORUS to model protoplanetary disks. Our implementation is motivated by theoretical dusty disk winds, where magnetic field lines drive dust above the disk plane close to the sublimation zone. Image reconstruction reveals an inclined disk with slight asymmetry along its minor-axis, likely due to inclination effects obscuring the inner disk rim through absorption of incident star light on the near-side and thermal re-emission/scattering of the far-side. Geometric modelling of a skewed ring finds the inner rim at 0.17+/-0.02 au with an inclination of 50.9+/-1.0 degrees and minor axis position angle 60.8+/-1.2 degrees. Radiative transfer modelling shows a flared disk with an inner radius at 0.18 au which implies a grain size of 0.4 um and a scale height of 15.0 au at 100 au. Among the tested radiative transfer models, only the dusty disk wind successfully accounts for the K-band excess by introducing dust above the mid-plane.

We present comprehensive models of Herbig Ae star, HD 142666, which aim to simultaneously explain its spectral energy distribution (SED) and near-infrared (NIR) interferometry. Our new sub-milliarcsecond resolution CHARA (CLASSIC and CLIMB) interferometric observations, supplemented with archival shorter baseline data from VLTI/PIONIER and the Keck Interferometer, are modeled using centro-symmetric geometric models and an axisymmetric radiative transfer code. CHARA's 330 m baselines enable us to place strong constraints on the viewing geometry, revealing a disk inclined at 58 degrees from face-on with a 160 degree major axis position angle. Disk models imposing vertical hydrostatic equilibrium provide poor fits to the SED. Models accounting for disk scale height inflation, possibly induced by turbulence associated with magneto-rotational instabilities, and invoking grain growth to >1 micron size in the disk rim are required to simultaneously reproduce the SED and measured visibility profile. However, visibility residuals for our best model fits to the SED indicate the presence of unexplained NIR emission, particularly along the apparent disk minor axis, while closure phase residuals indicate a more centro-symmetric emitting region. In addition, our inferred 58 degree disk inclination is inconsistent with a disk-based origin for the UX Ori-type variability exhibited by HD 142666. Additional complexity, unaccounted for in our models, is clearly present in the NIR-emitting region. We propose the disk is likely inclined toward a more edge-on orientation and/or an optically thick outflow component also contributes to the NIR circumstellar flux.

MIRC-X is a new beam combination instrument at the CHARA array that enables 6-telescope interferometric imaging on object classes that until now have been out of reach for milliarcsecond-resolution imaging. As part of an instrumentation effort lead by the University of Exeter and University of Michigan, we equipped the MIRC instrument with an ultra-low read-noise detector system and extended the wavelength range to the J and H-band. The first phase of the MIRC-X commissioning was successfully completed in June 2017. In 2018 we will commission polarisation control to improve the visibility calibration and implement a 'cross-talk resiliant' mode that will minimise visibility cross-talk and enable exoplanet searches using precision closure phases. Here we outline our key science drivers and give an overview about our commissioning timeline. We comment on operational aspects, such as remote observing, and the prospects of co-phased parallel operations with the upcoming MYSTIC combiner.

Hot exozodiacal dust emission was detected in recent surveys around two dozen main sequence stars at distances of less than $1\,\text{au}$ using H and K band interferometry. Due to the high contrast as well as the small angular distance between the circumstellar dust and the star, direct observation of this dust component is challenging. An alternative way to explore the hot exozodiacal dust is provided by mid-infrared interferometry. We analyze the L, M and N band interferometric signature of this emission in order to find stronger constraints for the properties and the origin of the hot exozodiacal dust. Considering the parameters of nine debris disc systems derived previously, we model the discs in each of these bands. We find that the M band possesses the best conditions to detect hot dust emission, closely followed by L and N bands. The hot dust in three systems - HD 22484 (10 Tau), HD 102647 ($\beta$ Leo) and HD 177724 ($\zeta$ Aql) - shows a strong signal in the visibility functions which may even allow one to constrain the dust location. In particular, observations in the mid-infrared could help to determine whether the dust piles up at the sublimation radius or is located at radii up to $1\,\text{au}$. In addition, we explore observations of the hot exozodiacal dust with the upcoming mid-infrared interferometer MATISSE at the Very Large Telescope Interferometer (VLTI).