We study recent observations of propagating fluctuations in a prominence foot with Hinode Solar Optical Telescope (SOT) high-resolution observations in Ca~II and H alpha emission which we identify as nonlinear fast magnetosnic waves. Here we analyze further the observations of propagating waves and flows with Interface Region Imaging Spectrograph (IRIS) Mg~II slit jaw images, in addition to Hinode/SOT Ca~II images. We find that the waves have typical periods in the range of 5 - 11 minutes and wavelengths in the plane of the sky (POS) of about 2000 km, while the flows in narrow threads have typical speed in the POS of ~16-46 km/s. We also detect apparent kink oscillations in the threads with flowing material, and apply coronal seismology to estimate the magnetic field strength in the range 5-17 G. Using 2.5D MHD we model the combined effects of nonlinear waves and flows on the observed dynamics of the prominence material, and reproduce the propagating and refracting fast magnetosonic waves, as well as standing kink-mode waves in flowing material along the magnetic field. The modeling results are in good qualitative agreements with the observations of the various waves and flows in the prominence foot, further confirming coronal seismology analysis and improving the understanding of the fine scale dynamics of the prominence material.

The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission.

We have catalogued 196 filament oscillations from the GONG $H{\alpha}$ network data during several months near the maximum of solar cycle 24 (January - June 2014). Selected examples from the catalog are described in detail, along with our statistical analyses of all events. Oscillations were classified according to their velocity amplitude: 106 small-amplitude oscillations (SAOs), with velocities $<10\mathrm{\, km \; s^{-1}}$, and 90 large-amplitude oscillations (LAOs), with velocities $>10\mathrm{\, km \; s^{-1}}$. Both SAOs and LAOs are common, with one event of each class every two days on the visible side of the Sun. For nearly half of the events we identified their apparent trigger. The period distribution has a mean value of 58$\pm$15 min for both types of oscillations. The distribution of the damping time per period peaks at $\tau/P=1.75$ and $1.25$ for SAOs and LAOs respectively. We confirmed that LAO damping rates depend nonlinearly on the oscillation velocity. The angle between the direction of motion and the filament spine has a distribution centered at $27^\circ$ for all filament types. This angle agrees with the observed direction of filament-channel magnetic fields, indicating that most of the catalogued events are longitudinal (i.e., undergo field-aligned motions). We applied seismology to determine the average radius of curvature in the magnetic dips, $R\approx89$ Mm, and the average minimum magnetic-field strength, $B\approx16$ G. The catalog is available to the community online, and is intended to be expanded to cover at least 1 solar cycle.

We follow the eruption of two related intermediate filaments observed in H$\alpha$ (from GONG) and in EUV (from SDO/AIA) and the resulting large-amplitude longitudinal oscillations of the plasma in the filament channels. The events occurred in and around the decayed active region AR12486 on 2016 January 26. Our detailed study of the oscillation reveals that the periods of the oscillations are about one hour. In H$\alpha$ the period decreases with time and exhibits strong damping. The analysis of 171~\AA\ images shows that the oscillation has two phases, an initial long period phase and a subsequent oscillation with a shorter period. In this wavelength the damping appears weaker than in H$\alpha$. The velocity is the largest ever detected in a prominence oscillation, approximately 100 $\mathrm{\, km \, s^{-1}}$. Using SDO/HMI magnetograms we reconstruct the magnetic field of the filaments modeled as flux ropes by using a flux-rope insertion method. Applying seismological techniques we determine that the radii of curvature of the field lines in which cool plasma is condensed are in the range 75-120~Mm, in agreement with the reconstructed field. In addition, we infer a field strength of $\ge7$ to 30 gauss, depending on the electron density assumed; that is also in agreement with the values from the reconstruction (8-20 gauss). The poloidal flux is zero and the axis flux is of the order of 10$^{20}$ to 10$^{21}$ Mx, confirming the high shear existing even in a non-active filament.

We study nonlinear waves in a prominence foot using 2.5D MHD model motivated by recent high-resolution observations with Hinode/SOT in Ca~II emission of a prominence on October 10, 2012 showing highly dynamic small-scale motions in the prominence material. Observations of H$\alpha$ intensities and of Doppler shifts show similar propagating fluctuations. However the optically thick nature of the emission lines inhibits unique quantitative interpretation in terms of density. Nevertheless, we find evidence of nonlinear wave activity in the prominence foot by examining the relative magnitude of the fluctuation intensity ($\delta I/I\sim \delta n/n$). The waves are evident as significant density fluctuations that vary with height, and apparently travel upward from the chromosphere into the prominence material with quasi-periodic fluctuations with typical period in the range of 5-11 minutes, and wavelengths $\sim <$2000 km. Recent Doppler shift observations show the transverse displacement of the propagating waves. The magnetic field was measured with THEMIS instrument and was found to be 5-14 G. For the typical prominence density the corresponding fast magnetosonic speed is $\sim$20 km s$^{-1}$, in qualitative agreement with the propagation speed of the detected waves. The 2.5D MHD numerical model is constrained with the typical parameters of the prominence waves seen in observations. Our numerical results reproduce the nonlinear fast magnetosonic waves and provide strong support for the presence of these waves in the prominence foot. We also explore gravitational MHD oscillations of the heavy prominence foot material supported by dipped magnetic field structure.

In this chapter we review observations and techniques for measuring both bulk flows in prominences and prominence mass. Measuring these quantities is essential to development and testing of models discussed throughout this book. Prominence flows are complex and various, ranging from the relatively linear flows along prominence spines to the complex, turbulent patterns exhibited by hedgerow prominences. Techniques for measuring flows include time slice and optical flow techniques used for motions in the plane of the sky and the use of spectral line profiles to determine Doppler velocities along the line of sight. Prominence mass measurement is chiefly done via continuum absorption measurements, but mass has also been estimated using cloud modeling and white light measurements.

On 20 August 2010 an energetic disturbance triggered large-amplitude longitudinal oscillations in a nearby filament. The triggering mechanism appears to be episodic jets connecting the energetic event with the filament threads. In the present work we analyze this periodic motion in a large fraction of the filament to characterize the underlying physics of the oscillation as well as the filament properties. The results support our previous theoretical conclusions that the restoring force of large-amplitude longitudinal oscillations is solar gravity, and the damping mechanism is the ongoing accumulation of mass onto the oscillating threads. Based on our previous work, we used the fitted parameters to determine the magnitude and radius of curvature of the dipped magnetic field along the filament, as well as the mass accretion rate onto the filament threads. These derived properties are nearly uniform along the filament, indicating a remarkable degree of cohesiveness throughout the filament channel. Moreover, the estimated mass accretion rate implies that the footpoint heating responsible for the thread formation, according to the thermal nonequilibrium model, agrees with previous coronal heating estimates. We estimate the magnitude of the energy released in the nearby event by studying the dynamic response of the filament threads, and discuss the implications of our study for filament structure and heating.

On 20 August 2010 an energetic disturbance triggered damped large-amplitude longitudinal (LAL) oscillations in almost an entire filament. In the present work we analyze this periodic motion in the filament to characterize the damping and restoring mechanism of the oscillation. Our method involves placing slits along the axis of the filament at different angles with respect to the spine of the filament, finding the angle at which the oscillation is clearest, and fitting the resulting oscillation pattern to decaying sinusoidal and Bessel functions. These functions represent the equations of motion of a pendulum damped by mass accretion. With this method we determine the period and the decaying time of the oscillation. Our preliminary results support the theory presented by Luna and Karpen (2012) that the restoring force of LAL oscillations is solar gravity in the tubes where the threads oscillate, and the damping mechanism is the ongoing accumulation of mass onto the oscillating threads. Following an earlier paper, we have determined the magnitude and radius of curvature of the dipped magnetic flux tubes hosting a thread along the filament, as well as the mass accretion rate of the filament threads, via the fitted parameters.

We report an unusual set of observations of waves in a large prominence pillar which consist of pulses propagating perpendicular to the prominence magnetic field. We observe a huge quiescent prominence with the Solar Dynamics Observatory (SDO) Atmospheric Imaging Assembly (AIA) in EUV on 2012 October 10 and only a part of it, the pillar, which is a foot or barb of the prominence, with the Hinode Solar Optical Telescope (SOT) (in Ca II and H\alpha lines), Sac Peak (in H\alpha, H\beta\ and Na-D lines), THEMIS ("T\'elescope H\'eliographique pour l' Etude du Magn\'etisme et des Instabilit\'es Solaires") with the MTR (MulTi-Raies) spectropolarimeter (in He D_3 line). The THEMIS/MTR data indicates that the magnetic field in the pillar is essentially horizontal and the observations in the optical domain show a large number of horizontally aligned features on a much smaller scale than the pillar as a whole. The data is consistent with a model of cool prominence plasma trapped in the dips of horizontal field lines. The SOT and Sac Peak data over the 4 hour observing period show vertical oscillations appearing as wave pulses. These pulses, which include a Doppler signature, move vertically, perpendicular to the field direction, along thin quasi-vertical columns in the much broader pillar. The pulses have a velocity of propagation of about 10 km/s, a period about 300 sec, and a wavelength around 2000 km. We interpret these waves in terms of fast magneto-sonic waves and discuss possible wave drivers.

Recently observed oscillations in the solar atmosphere have been interpreted and modeled as magnetohydrodynamic wave modes. This has allowed the estimation of parameters that are otherwise hard to derive, such as the coronal magnetic-field strength. This work crucially relies on the initial detection of the oscillations, which is commonly done manually. The volume of Solar Dynamics Observatory (SDO) data will make manual detection inefficient for detecting all of the oscillating regions. An algorithm is presented which automates the detection of areas of the solar atmosphere that support spatially extended oscillations. The algorithm identifies areas in the solar atmosphere whose oscillation content is described by a single, dominant oscillation within a user-defined frequency range. The method is based on Bayesian spectral analysis of time-series and image filtering. A Bayesian approach sidesteps the need for an a-priori noise estimate to calculate rejection criteria for the observed signal, and it also provides estimates of oscillation frequency, amplitude and noise, and the error in all these quantities, in a self-consistent way. The algorithm also introduces the notion of quality measures to those regions for which a positive detection is claimed, allowing simple post-detection discrimination by the user. The algorithm is demonstrated on two Transition Region and Coronal Explorer (TRACE) datasets, and comments regarding its suitability for oscillation detection in SDO are made.

This review paper outlines background information and covers recent advances made via the analysis of spectra and images of prominence plasma and the increased sophistication of non-LTE (ie when there is a departure from Local Thermodynamic Equilibrium) radiative transfer models. We first describe the spectral inversion techniques that have been used to infer the plasma parameters important for the general properties of the prominence plasma in both its cool core and the hotter prominence-corona transition region. We also review studies devoted to the observation of bulk motions of the prominence plasma and to the determination of prominence mass. However, a simple inversion of spectroscopic data usually fails when the lines become optically thick at certain wavelengths. Therefore, complex non-LTE models become necessary. We thus present the basics of non-LTE radiative transfer theory and the associated multi-level radiative transfer problems. The main results of one- and two-dimensional models of the prominences and their fine-structures are presented. We then discuss the energy balance in various prominence models. Finally, we outline the outstanding observational and theoretical questions, and the directions for future progress in our understanding of solar prominences.

A Bayesian probability based approach is applied to the problem of detecting and parameterizing oscillations in the upper solar atmosphere for the first time. Due to its statistical origin, this method provides a mechanism for determining the number of oscillations present, gives precise estimates of the oscillation parameters with a self-consistent statistical error analysis, and allows the oscillatory model signals to be reconstructed within these errors. A highly desirable feature of the Bayesian approach is the ability to resolve oscillations with extremely small frequency separations. The code is applied to SOHO/CDS (Solar and Heliospheric Observatory/Coronal Diagnostic Spectrometer) O V 629A observations and resolves four distinct P4, P5, P6 and P7 p-modes within the same sunspot transition region. This suggests that a spectrum of photospheric p-modes is able to propagate into the upper atmosphere of the Sun and Sun-like stars, and places precise observational constraints on models of umbral eigen modes.