With the launch of SDO, many EUV waves were observed during solar eruptions. However, the joint observations of Moreton and EUV waves are still relatively rare. We present an event that a small-scale filament eruption simultaneously results in a Moreton wave, an EUV wave and a Coronal Mass Ejection in active region NOAA 12740. Firstly, we find that some dark elongate lanes or filamentary structures in the photosphere existed under the small-scale filament and drifted downward, which manifests that the small-scale filament was emerging and lifting from subsurface. Secondly, combining the simultaneous observations in different Extreme UltraViolet (EUV) and H$\alpha$ passbands, we study the kinematic characteristics of the Moreton and EUV waves. The comparable propagating velocities and the similar morphology of Moreton and different passbands EUV wavefronts were obtained. We deduce that Moreton and different passbands EUV waves were the perturbations in different temperature-associated layers induced by the coronal magneto-hydrodynamic shock wave. We also find the refracted, reflected and diffracted phenomena during the propagation of the EUV wave. By using power-law fittings, the kinematic characteristics of unaffected, refracted and diffracted waves were obtained. The extrapolation field derived by the potential field source surface (PFSS) model manifests that the existence of an interface of different magnetic system (magnetic separatrix) result in refraction, reflection and deviation of the EUV wave.

Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$\alpha$ images from the New Vacuum Solar Telescope (NVST), supplemented by EUV observations of the Solar Dynamical Observatory (SDO). Before the filament eruption, a small bi-pole magnetic field emerged below the filament. And then magnetic reconnection between the filament and the emerging bi-pole magnetic field triggered the filament eruption. During the filament eruption, the untwisting motion of the filament can be clearly traced by the eruptive threads. Moreover, the foot-points of the eruptive threads are determined by tracing the descending filament materials. Note that the filament twisted structure and the right part of the eruptive filament threads cannot be seen before the filament eruption. These eruptive threads at the right part of the filament are found to be rooting in the weak negative polarities near the main negative sunspot. Moreover, a new filament formed in the filament channel due to material injection from the eruptive filament. The above observations and the potential field extrapolations are inclined to support that the filament materials were transferred into the overlying magnetic loops and the nearby filament channel by magnetic reconnection. These observations shed light on better understanding on the complexity of filament eruptions.

To better understand the formation and decay of sunspot penumbra, we studied the evolution of sunspots in the three regions of the active-region NOAA 12673 in detail. The evolution of sunspots in the three regions were all involved in the interaction of two magnetic field systems: the pre-existing magnetic field system and the later emerging magnetic field system. Through analyzing the photospheric magnetic field properties, it is found that the formation of the penumbra originated from the newly emerging magnetic bipole that were trapped in the photosphere. The change of magnetic fields in penumbra from horizontal to vertical can cause the disappearance of penumbra. The transformation of the magnetic field between the umbra and the penumbra is found and the outward moat flow around sunspot gradually decreased and vanished during the decay of sunspot. In addition, we found that the mean longitudinal magnetic strength in penumbra decreased and the mean transverse magnetic strength in penumbra increased with the increasing penumbral area during the formation of sunspots. However, during the decay of sunspots, the mean longitudinal magnetic strength in penumbra increased and the mean transverse magnetic strength in penumbra decreased with the decreasing penumbral area. Comparatively, the dependence of the area and the mean transverse/longitudinal magnetic field strength in umbra is not remarkable. These results reveal that the formation and decay process of umbra are different with penumbra.

Space very long baseline interferometry (VLBI) has unique applications in high-resolution imaging of fine structure of astronomical objects and high-precision astrometry due to the key long space-Earth or space-space baselines beyond the Earth's diameter. China has been actively involved in the development of space VLBI in recent years. This review briefly summarizes China's research progress in space VLBI and the future development plan.

Solar photospheric magnetic field plays a dominant role in the variability of total solar irradiance (TSI). The modulation of magnetic flux at six specific ranges on TSI is characterized for the first time. The daily flux values of magnetic field at four ranges are extracted from MDI/{\sl SOHO}, together with daily flux of active regions (MF$_{\text{ar}}$) and quiet regions (MF$_{\text{qr}}$); the first four ranges (MF$_{1-4}$) are: 1.5--2.9, 2.9--32.0, 32.0--42.7, and 42.7--380.1 ($\times 10^{18}$ Mx per element), respectively. Cross-correlograms show that MF$_4$, MF$_{\text{qr}}$, and MF$_{\text{ar}}$ are positively correlated with TSI, while MF$_2$ is negatively correlated with TSI; the correlations between MF$_1$, MF$_3$ and TSI are insignificant. The bootstrapping tests confirm that the impact of MF$_4$ on TSI is more significant than that of MF$_{\text{ar}}$ and MF$_{\text{qr}}$, and MF$_{\text{ar}}$ leads TSI by one rotational period. By extracting the rotational variations in the MFs and TSI, the modulations of the former on the latter at the solar rotational timescale are clearly illustrated and compared during solar maximum and minimum times, respectively. Comparison of the relative amplitudes of the long-term variation show that TSI is in good agreement with the variation of MF$_4$ and MF$_{\text{ar}}$; besides, MF$_2$ is in antiphase with TSI, and it lags the latter by about 1.5 years.

We present a clear case study on the occurrence of two successive X-class flares including a decade-class flare (X9.3) and two coronal mass ejections (CMEs) triggered by shearing motion and sunspot rotation in active region NOAA 12673 on 2017 September 6. A shearing motion between the main sunspots with opposite polarities started on September 5 and even lasted after the second X-class flare on September 6. Moreover, the main sunspot with negative polarity rotated around its umbral center and another main sunspot with positive polarity also exhibited a slow rotation. The sunspot with negative polarity at the northwest of active region also began to rotate counter-clockwise before the onset of the first X-class flare. The successive formation and eruption of two S-shaped structures were closely related to the counter-clockwise rotation of three sunspots. It is also found that the rotation of sunspots is faster during four hours prior to the onset of the flares than the period before. The existence of a flux rope is found prior to the onset of two flares by using non-linear force free field extrapolation based on the vector magnetograms observed by SDO/HMI. These results suggest that shearing motion and sunspot rotation play an important role in the buildup of the free energy and the formation of flux ropes in the corona which produces solar flares and CMEs.

In this letter, we present a spectacular eruptive flare (X8.2) associated with a coronal mass ejection (CME) on 2017 September 10 at the west limb of the Sun. A flux rope eruption is followed by the inflow, the formation of a current sheet and a cusp structure, which were simultaneously observed during the occurrence of this flare. The hierarchical layers of the cusp-shaped structure are well observed in 131 \AA\ observation. The scenario that can be created from these observations is very consistent with the predictions of some eruptive models. Except for the characteristics mentioned above in the process of the flare predicted by classical eruption models, the current sheet separating into several small current sheets is also observed at the final stage of the flux rope eruption. The quantitative calculation of the velocities and accelerations of the inflow, hot cusp structure, and post-flare loops is presented. The width of the current sheet is estimated to be about 3 $\times$ $10^{3}$ km. These observations are very useful to understand the process of solar eruptions.

Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-scale emerging flux rope near a large sunspot, whose eruption produced an M-class flare and a coronal mass ejection. The presence of the small-scale flux rope was indicated by static nonlinear force free field (NLFFF) extrapolation as well as data-driven MHD modeling of the dynamic evolution of the coronal 3D magnetic field. During the emergence of the flux rope, rotation of satellite sunspots at the footpoints of the flux rope was observed. Meanwhile, the Lorentz force, magnetic energy, vertical current, and transverse fields were increasing during this phase. The free energy from the magnetic flux emergence and twisting magnetic fields is sufficient to power the M-class flare. These observations for the first time present the complete process from the emergence of the small-scale flux rope to the production of solar eruptions.

To better understand the structures of active-region filaments and the eruption process, we study an active-region filament eruption in active region NOAA 11082 in detail on June 22, 2010. Before the filament eruption, the opposite unidirectional material flows appeared in succession along the spine of the filament. The rising of the filament triggered two B-class flares at the upper part of the filament. As the bright material was injected into the filament from the sites of the flares, the filament exhibited a rapid uplift accompanying the counterclockwise rotation of the filament body. From the expansion of the filament, we can see that the filament is consisted of twisted magnetic field lines. The total twist of the filament is at least 5$\pi$ obtained by using time slice method. According to the morphology change during the filament eruption, it is found that the active-region filament was a twisted flux rope and its unwinding motion was like a solar tornado. We also find that there was a continuous magnetic helicity injection before and during the filament eruption. It is confirmed that magnetic helicity can be transferred from the photosphere to the filament. Using the extrapolated potential fields, the average decay index of the background magnetic fields over the filament is 0.91. Consequently, these findings imply that the mechanism of solar filament eruption could be due to the kink instability and magnetic helicity accumulation.

Kink instability is a possible mechanism for solar filament eruption. However, the twist of a solar filament is very difficult to directly measure from observation. In this paper, we carried out the measurement of the twist of a solar filament by analyzing its leg rotation. An inverse S-shaped filament in active region NOAA 11485 was observed by the Atmospheric Imaging Assembly (AIA) of Solar Dynamics Observatory (SDO) on 2012 May 22. During its eruption, the leg of the filament exhibited a significant rotation motion. The 304 \AA\ images were used to uncurl along the circles, whose centers are the axis of the filament's leg. The result shows that the leg of the filament rotated up to about 510 degrees (about 2.83$\pi$) around the axis of the filament within twenty-three minutes. The maximal rotation speed reached 100 degrees per minute (about 379.9 km/s at radius 18$^\prime$$^\prime$), which is the fastest rotation speed that has been reported. We also calculated the decay index along the polarity inversion line in this active region and found that the decline of the overlying field with height is not so fast enough to trigger the torus instability. According to the condition of kink instability, it is indicating that the kink instability is the trigger mechanism for the solar filament eruption.

We find that a sunspot with positive polarity had an obvious counter-clockwise rotation and resulted in the formation and eruption of an inverse S-shaped filament in NOAA active region (AR) 08858 from 2000 February 9 to 10. The sunspot had two umbrae which rotated around each other by 195 degrees within about twenty-four hours. The average rotation rate was nearly 8 degrees per hour. The fastest rotation in the photosphere took place during 14:00UT to 22:01UT on February 9, with the rotation rate of nearly 16 degrees per hour. The fastest rotation in the chromosphere and the corona took place during 15:28UT to 19:00UT on February 9, with the rotation rate of nearly 20 degrees per hour. Interestingly, the rapid increase of the positive magnetic flux just occurred during the fastest rotation of the rotating sunspot, the bright loop-shaped structure and the filament. During the sunspot rotation, the inverse S-shaped filament gradually formed in the EUV filament channel. The filament experienced two eruptions. In the first eruption, the filament rose quickly and then the filament loops carrying the cool and the hot material were seen to spiral into the sunspot counterclockwise. About ten minutes later, the filament became active and finally erupted. The filament eruption was accompanied with a C-class flare and a halo coronal mass ejection (CME). These results provide evidence that sunspot rotation plays an important role in the formation and eruption of the sigmoidal active-region filament.

Ground-based observation of Interplanetary Scintillation(IPS) is an important approach of monitoring solar wind. A ground-based IPS observation system is newly implemented on 50m radio telescope, Miyun station, National Astronomical Observatories, Chinese Academy of Sciences(NAOC). This observation system is constructed for purpose of observing the solar wind speed and scintillation index by using the normalized cross-spectrum of simultaneous dual-frequency IPS measurement. The system consists of a universal dual-frequency front-end and a dual-channel multi-function back-end specially designed for IPS. After careful calibration and testing, IPS observations on source 3C273B and 3C279 are successfully carried out. The preliminary observation results show that this newly developed observation system is capable of doing IPS observation.The system sensitivity for IPS observation can reach over 0.3Jy in terms of IPS polarization correlator with 4MHz bandwidth and 2s integration time.

The exact solution for the shape and gravitational field of a rotating two-layer Maclaurin ellipsoid of revolution is compared with predictions of the theory of figures up to third order in the small rotational parameter of the theory of figures. An explicit formula is derived for the external gravitational coefficient $J_2$ of the exact solution. A new approach to the evaluation of the theory of figures based on numerical integration of ordinary differential equations is presented. The classical Radau-Darwin formula is found not to be valid for the rotational parameter \epsilon_2 = \Omega^2/(2\pi G\rho_2) >= 0.17 since the formula then predicts a surface eccentricity that is smaller than the eccentricity of the core-envelope boundary. Interface eccentricity must be smaller than surface eccentricity. In the formula for $\epsilon_2$, $\Omega$ is the angular velocity of the two-layer body, $\rho_2$ is the density of the outer layer, and G is the gravitational constant. For an envelope density of 3000 kg m^(-3) the failure of the Radau-Darwin formula corresponds to a rotation period of about 3 hr. Application of the exact solution and the theory of figures is made to models of Earth, Mars, Uranus, and Neptune. The two-layer model with constant densities in the layers can provide realistic approximations to terrestrial planets and icy outer planet satellites. The two-layer model needs to be generalized to allow for a continuous envelope (outer layer) radial density profile in order to realistically model a gas or ice giant planet.

To better understand the dynamical process of active-region filament eruptions and associated flares and CMEs, we carried out a statistical study of 120 events observed by BBSO, TRACE, and t(SOHO/EIT) from 1998 to 2007 and combined filament observations with the NOAA's flare reports, MDI magnetograms, and LASCO data, to investigate the relationship between active-region filament eruptions and other solar activities. We found that 115 out of 120 filament eruptions are associated with flares. 56 out of 105 filament eruptions are found to be associated with CMEs except for 15 events without corresponding LASCO data. We note the limitation of coronagraphs duo to geometry or sensitivity, leading to many smaller CMEs that are Earth-directed or well out of the plane of sky not being detected by near-Earth spacecraft. Excluding those without corresponding LASCO data, the CME association rate of active-region filament eruptions clearly increases with X-ray flare class from about 32% for C-class flares to 100% for X-class flares. The eruptions of active-region filaments associated with Halo CMEs are often accompanied by large flares. About 92% events associated with X-class flare are associated with Halo CMEs. Such a result is due to that the Earth-directed CMEs detected as Halo CMEs are often the larger CMEs and many of the smaller ones are not detected because of the geometry and low intensity. The average speed of the associated CMEs of filament eruptions increases with X-ray flare size from 563.7 km/s for C-class flares to 1506.6 km/s for X-class flares. Moreover, the magnetic emergence and cancellation play an important role in triggering filament eruptions. These findings may be instructive to not only in respect to the modeling of active-region filament eruptions but also in predicting flares and CMEs.