The size and composition of dust grains are critical in setting the dynamical, physical and chemical evolution of the media in which they are present. Thanks to facilities such as ALMA and in the future the SKA, their thermal emission in the (sub)mm to cm has become a convenient way to trace grain properties. Our aim is to understand the influence of the grain composition and size distribution on the shape of their SED in dense ISM regions such as molecular clouds, prestellar cores, YSOs and protoplanetary discs. Starting from the optical constants defined in the THEMIS model for amorphous hydrogenated carbon and silicate grains in addition to water ice, we define 6 material mixtures representative of the expected dust composition in dense ISM regions. The optical properties of 0.01 micron to 10 cm grains are then calculated with effective medium and Mie theories. The corresponding SEDs are calculated for isolated clouds either externally heated by the ISRF alone or in addition to an internal source. The 3 main outcomes of this study are as follows. First, the dust mass absorption coefficient strongly depends on both its composition and size distribution potentially leading to errors in dust mass estimates by factors up to 3 and 20, respectively. Second, it appears almost impossible to retrieve the grain composition from the (sub)mm to cm SED shape alone as its spectral index for lambda > 3 mm does not depend on composition. Third, using the true dust opacity spectral index to estimate grain sizes may lead to erroneous findings as the observed spectral index can be highly modified by the dust temperature distribution along the line-of-sight, which depends on the specific heating source and on the geometry of the studied region. Based on the interpretation of only the spectral shape of (sub)mm to cm SEDs, the determination of the dust masses, compositions and sizes are highly uncertain.

Grains are determinant for setting the chemical, physical, dynamical, and radiative properties of all the media in which they are present. Their influence depends on the grain composition, size, and geometrical structure which vary throughout the dust lifecycle. Grain growth arises in dense media as traced by an enhancement of the FIR emissivity and by cloudshine and coreshine. We investigate the imprint of the grain characteristics on the dust unpolarised optical properties from the visible to the FIR for isolated grains and aggregates. Using optical constants for both carbonaceous and silicate materials, we derive the absorption and scattering efficiencies, the asymmetry factor of the phase function, the albedo, and the mass opacity, using either Mie theory or DDA. We study the effects of the size, porosity and shape of the grains, and of the monomers constituting the aggregates, on the optical properties. For aggregates we study the influence of the number of monomers and of mixing monomer sizes. Grain structure changes result in variations at all wavelengths. Porosity, grain elongation, and aggregation all produce an increase in the FIR opacity. The spectral dependence of this increase depends on the nature of the material composing the grain: it is independent of the wavelength for insulators but not for conductors. For aggregates, the FIR increase does not depend on the monomer size and saturates for aggregates containing 6 or more monomers. For silicates, the MIR spectral feature at 18 microns is more sensitive to the details of the grain structure than the 10 microns feature. This study provides a basis for understanding the range of variations achievable as a result of varying the grain characteristics. It emphasises the importance of considering the detailed grain structure in determining the dust optical properties and of using exact methods.

In bright photodissociation regions (PDRs) associated to massive star formation, the presence of dense "clumps" that are immersed in a less dense interclump medium is often proposed to explain the difficulty of models to account for the observed gas emission in high-excitation lines. We aim at presenting a comprehensive view of the modeling of the CO rotational ladder in PDRs, including the high-J lines that trace warm molecular gas at PDR interfaces. We observed the 12CO and 13CO ladders in two prototypical PDRs, the Orion Bar and NGC 7023 NW using the instruments onboard Herschel. We also considered line emission from key species in the gas cooling of PDRs (C+, O, H2) and other tracers of PDR edges such as OH and CH+. All the intensities are collected from Herschel observations, the literature and the Spitzer archive and are analyzed using the Meudon PDR code. A grid of models was run to explore the parameter space of only two parameters: thermal gas pressure and a global scaling factor that corrects for approximations in the assumed geometry. We conclude that the emission in the high-J CO lines, which were observed up to Jup=23 in the Orion Bar (Jup=19 in NGC7023), can only originate from small structures of typical thickness of a few 1e-3 pc and at high thermal pressures (Pth~1e8 K cm-3). Compiling data from the literature, we found that the gas thermal pressure increases with the intensity of the UV radiation field given by G0, following a trend in line with recent simulations of the photoevaporation of illuminated edges of molecular clouds. This relation can help rationalising the analysis of high-J CO emission in massive star formation and provides an observational constraint for models that study stellar feedback on molecular clouds.

Here we introduce the interstellar dust modelling framework THEMIS (The Heterogeneous dust Evolution Model for Interstellar Solids), which takes a global view of dust and its evolution in response to the local conditions in interstellar media. This approach is built upon a core model that was developed to explain the dust extinction and emission in the diffuse interstellar medium. The model was then further developed to self-consistently include the effects of dust evolution in the transition to denser regions. The THEMIS approach is under continuous development and currently we are extending the framework to explore the implications of dust evolution in HII regions and the photon-dominated regions associated with star formation. We provide links to the THEMIS, DustEM and DustPedia websites where more information about the model, its input data and applications can be found.

Nitrogen is a major nutrient for all life on Earth and could plausibly play a similar role in extraterrestrial biospheres. The major reservoir of nitrogen at Earth's surface is atmospheric N2, but recent studies have proposed that the size of this reservoir may have fluctuated significantly over the course of Earth's history with particularly low levels in the Neoarchean - presumably as a result of biological activity. We used a biogeochemical box model to test which conditions are necessary to cause large swings in atmospheric N2 pressure. Parameters for our model are constrained by observations of modern Earth and reconstructions of biomass burial and oxidative weathering in deep time. A 1-D climate model was used to model potential effects on atmospheric climate. In a second set of tests, we perturbed our box model to investigate which parameters have the greatest impact on the evolution of atmospheric pN2 and consider possible implications for nitrogen cycling on other planets. Our results suggest that (a) a high rate of biomass burial would have been needed in the Archean to draw down atmospheric pN2 to less than half modern levels, (b) the resulting effect on temperature could probably have been compensated by increasing solar luminosity and a mild increase in pCO2, and (c) atmospheric oxygenation could have initiated a stepwise pN2 rebound through oxidative weathering. In general, life appears to be necessary for significant atmospheric pN2 swings on Earth-like planets. Our results further support the idea that an exoplanetary atmosphere rich in both N2 and O2 is a signature of an oxygen-producing biosphere.

Dust grains play a key role in the physics of star-forming regions, even though they constitute only $\sim$1 % of the mass of the interstellar medium. The derivation of accurate dust parameters such as temperature ($T_{dust}$), emissivity spectral index ($\beta$) and column density requires broadband continuum observations at far-infrared wavelengths. We present Herschel-SPIRE Fourier Transform Spectrometer (FTS) measurements of three starless cores: L1521E, L1521F and L1689B, covering wavelengths between 194 and 671 $\mu$m. This paper is the first to use our recently updated SPIRE-FTS intensity calibration, yielding a direct match with SPIRE photometer measurements of extended sources. In addition, we carefully assess the validity of calibration schemes depending on source extent and on the strength of background emission. The broadband far-infrared spectra for all three sources peak near 250 $\mu$m. Our observations therefore provide much tighter constraints on the spectral energy distribution (SED) shape than measurements that do not probe the SED peak. The spectra are fitted using modified blackbody functions, allowing both $T_{dust}$ and $\beta$ to vary as free parameters. This yields $T_{dust}$ of 9.8$\pm$0.2 K, 15.6$\pm$0.5 K and 10.9$\pm$0.2 K and corresponding $\beta$ of 2.6$\mp$0.9, 0.8$\mp$0.1 and 2.4$\mp$0.8 for L1521E, L1521F and L1689B respectively. The derived core masses are 1.0$\pm$0.1, 0.10$\pm$0.01 and 0.49$\pm$0.05 $M_{\odot}$, respectively. The core mass/Jeans mass ratios for L1521E and L1689B exceed unity indicating that they are unstable to gravitational collapse, and thus pre-stellar cores. By comparison, the elevated temperature and gravitational stability of L1521F support previous arguments that this source is more evolved and likely a protostar.

Context. The observed cloudshine and coreshine (C-shine) have been explained in terms of grain growth leading to enhanced scatter- ing from clouds in the J, H and K photometric bands and the Spitzer IRAC 3.6 and 4.5 {\mu}m bands. Aims. Using our global dust modelling approach THEMIS (The Heterogeneous dust Evolution Model at the IaS) we explore the effects of dust evolution in dense clouds, through aliphatic-rich carbonaceous mantle formation and grain-grain coagulation. Methods. We model the effects of wide band gap a-C:H mantle formation and the low-level aggregation of diffuse interstellar medium dust in the moderately-extinguished outer regions of molecular clouds. Results. The formation of wide band gap a-C:H mantles on amorphous silicate and amorphous carbon (a-C) grains leads to a decrease in their absorption cross-sections but no change in their scattering cross-sections at near-IR wavelengths, resulting in higher albedos. Conclusions. The evolution of dust, with increasing density and extinction in the diffuse to dense molecular cloud transition, through mantle formation and grain aggregation, appears to be a likely explanation for the observed C-shine.

Many dense interstellar clouds are observable in emission in the near-IR, commonly referred to as "Cloudshine", and in the mid-IR, the so-called "Coreshine". These C-shine observations have usually been explained with grain growth but no model has yet been able to self-consistently explain the dust spectral energy distribution from the near-IR to the submm. We want to demonstrate the ability of our new core/mantle evolutionary dust model THEMIS (The Heterogeneous dust Evolution Model at the IaS), which has been shown to be valid in the far-IR and submm, to reproduce the C-shine observations. Our starting point is a physically motivated core/mantle dust model. It consists of 3 dust populations: small aromatic-rich carbon grains; bigger core/mantle grains with mantles of aromatic-rich carbon and cores either made of amorphous aliphatic-rich carbon or amorphous silicate. We assume an evolutionary path where these grains, when entering denser regions, may first form a second aliphatic-rich carbon mantle (coagulation of small grains, accretion of carbon from the gas phase), second coagulate together to form large aggregates, and third accrete gas phase molecules coating them with an ice mantle. To compute the corresponding dust emission and scattering, we use a 3D Monte-Carlo radiative transfer code. We show that our global evolutionary dust modelling approach THEMIS allows us to reproduce C-shine observations towards dense starless clouds. Dust scattering and emission is most sensitive to the cloud central density and to the steepness of the cloud density profile. Varying these two parameters leads to changes, which are stronger in the near-IR, in both the C-shine intensity and profile. With a combination of aliphatic-rich mantle formation and low-level coagulation into aggregates, we can self-consistently explain the observed C-shine and far-IR/submm emission towards dense starless clouds.

Geological activity is thought to be important for the origin of life and for maintaining planetary habitability. We show that transient sulfate aerosols could be a signature of exoplanet volcanism, and therefore a geologically active world. A detection of transient aerosols, if linked to volcanism, could thus aid in habitability evaluations of the exoplanet. On Earth, subduction-induced explosive eruptions inject SO2 directly into the stratosphere, leading to the formation of sulfate aerosols with lifetimes of months to years. We demonstrate that the rapid increase and gradual decrease in sulfate aerosol loading associated with these eruptions may be detectable in transit transmission spectra with future large-aperture telescopes, such as the James Webb Space Telescope (JWST) and European Extremely-Large Telescope (E-ELT) for a planetary system at a distance of 10 pc, assuming an Earth-like atmosphere, bulk composition, and size. Specifically, we find that a S/N of 12.1 and 7.1 could be achieved with E-ELT (assuming photon-limited noise) for an Earth-analog orbiting a Sun-like star and M5V star, respectively, even without multiple transits binned together. We propose that the detection of this transient signal would strongly suggest an exoplanet volcanic eruption, if potential false positives such as dust storms or bolide impacts can be ruled out. Furthermore, because scenarios exist in which O2 can form abiotically in the absence of volcanic activity, a detection of transient aerosols that can be linked to volcanism, along with a detection of O2, would be a more robust biosignature than O2 alone.

The Planck-HFI all-sky survey from 353 to 857GHz combined with the 100 microns IRAS show that the dust properties vary in the diffuse ISM at high Galactic latitude (1e19<NH<2.5e20 H/cm2). Our aim is to explain these variations with changes in the ISM properties and grain evolution. Our starting point is the latest core-mantle dust model. It consists of small aromatic-rich carbon grains, larger amorphous carbon grains with aliphatic-rich cores and aromatic-rich mantles, and amorphous silicates with Fe/FeS nano-inclusions covered by aromatic-rich carbon mantles. We explore whether variations in the radiation field or in the gas density distribution in the diffuse ISM could explain the observations. The dust properties are also varied in terms of mantle thickness, Fe/FeS inclusions, carbon abundance, and size distribution. Variations in the radiation field intensity and gas density distribution cannot explain the observed variations but radiation fields harder than the standard ISRF may participate in creating part of them. We further show that variations in the grain mantle thickness coupled with changes in the grain size distribution can reproduce most of the observations. We put a limit on the mantle thickness of the silicates (~10-15nm), and find that aromatic-rich mantles are needed for the carbon grains (at least 5-7.5nm thick). We also find that changes in the carbon abundance in the grains could explain part of the observed variations. Finally, we show that varying the composition of Fe/FeS inclusions in the silicates cannot account for the variations. With small variations in the dust properties, we are able to explain most of the variations in the dust emission observed by Planck-HFI in the diffuse ISM. We also find that the small realistic changes in the dust properties that we consider almost perfectly match the anti-correlation and scatter in the observed beta-T relation.

Context. The evolution of amorphous hydrocarbon materials, a-C(:H), principally resulting from ultraviolet (UV) photon absorption- induced processing, are likely at the heart of the variations in the observed properties of dust in the interstellar medium. Aims. The consequences of the size-dependent and compositional variations in a-C(:H), from aliphatic-rich a-C:H to aromatic-rich a-C, are studied within the context of the interstellar dust extinction and emission. Methods. Newly-derived optical property data for a-C(:H) materials, combined with that for an amorphous forsterite-type silicate with iron nano-particle inclusions, a-SilFe, are used to explore dust evolution in the interstellar medium. Results. We present a new dust model that consists of a power-law distribution of small a-C grains and log-normal distributions of large a-SilFe and a-C(:H) grains. The model, which is firmly anchored by laboratory-data, is shown to quite naturally explain the variations in the infrared (IR) to far-ultraviolet (FUV) extinction, the 217 nm UV bump, the IR absorption and emission bands and the IR-mm dust emission. Conclusions. The major strengths of the new model are its inherent simplicity and built-in capacity to follow dust evolution in interstellar media. We show that mantle accretion in molecular clouds and UV photo-processing in photo-dominated regions are likely the major drivers of dust evolution.

Observational evidence seems to indicate that the depletion of interstellar carbon into dust shows rather wide variations and that carbon undergoes rather rapid recycling in the interstellar medium (ISM). Small hydrocarbon grains are processed in photo-dissociation regions by UV photons, by ion and electron collisions in interstellar shock waves and by cosmic rays. A significant fraction of hydrocarbon dust must therefore be re-formed by accretion in the dense, molecular ISM. A new dust model (Jones et al., Astron. Astrophys., 2013, 558, A62) shows that variations in the dust observables in the diffuse interstellar medium (nH = 1000 cm^3), can be explained by systematic and environmentally-driven changes in the small hydrocarbon grain population. Here we explore the consequences of gas-phase carbon accretion onto the surfaces of grains in the transition regions between the diffuse ISM and molecular clouds (e.g., Jones, Astron. Astrophys., 2013, 555, A39). We find that significant carbonaceous dust re-processing and/or mantle accretion can occur in the outer regions of molecular clouds and that this dust will have significantly different optical properties from the dust in the adjacent diffuse ISM. We conclude that the (re-)processing and cycling of carbon into and out of dust is perhaps the key to advancing our understanding of dust evolution in the ISM.

The first detection of the silicate absorption feature in AGNs was made at 9.7 micrometer for the prototypical Seyfert 2 galaxy NGC 1068 over 30 years ago, indicating the presence of a large column of silicate dust in the line-of-sight to the nucleus. It is now well recognized that type 2 AGNs exhibit prominent silicate absorption bands, while the silicate bands of type 1 AGNs appear in emission. More recently, using the Mid-Infrared Interferometric Instrument on the Very Large Telescope Interferometer, Jaffe et al. (2004) by the first time spatially resolved the parsec-sized dust torus around NGC 1068 and found that the 10 micrometer silicate absorption feature of the innermost hot component exhibits an anomalous profile differing from that of the interstellar medium and that of common olivine-type silicate dust. While they ascribed the anomalous absorption profile to gehlenite (Ca_2Al_2SiO_7, a calcium aluminum silicate species), we propose a physical dust model and argue that, although the presence of gehlenite is not ruled out, the anomalous absorption feature mainly arises from silicon carbide.

We report the detection and successful modeling of the unusual 9.7\mum Si--O stretching silicate emission feature in the type 1 (i.e. face-on) LINER nucleus of M81. Using the Infrared Spectrograph (IRS) instrument on Spitzer, we determine the feature in the central 230 pc of M81 to be in strong emission, with a peak at ~10.5\mum. This feature is strikingly different in character from the absorption feature of the galactic interstellar medium, and from the silicate absorption or weak emission features typical of galaxies with active star formation. We successfully model the high signal-to-noise ratio IRS spectra with porous silicate dust using laboratory-acquired mineral spectra. We find that the most probable fit uses micron-sized, porous grains of amorphous silicate and graphite. In addition to silicate dust, there is weak PAH emission present (particularly at 11.3\mum, arising from the C--H out-of-plane bending vibration of relatively large PAHs of ~500--1000 C atoms) whose character reflects the low-excitation AGN environment, with some evidence that small PAHs of ~100--200 C atoms (responsible for the 7.7\mum C--C stretching band) in the immediate vicinity of the nucleus have been preferentially destroyed. (abstract continues)

The red spectral shape of the visible to near infrared reflectance spectrum of the sharply-edged ring-like disk around the young main sequence star HR 4796A was recently interpreted as the presence of tholin-like complex organic materials which are seen in the atmosphere and surface of Titan and the surfaces of icy bodies in the solar system. However, we show in this Letter that porous grains comprised of common cosmic dust species (amorphous silicate, amorphous carbon, and water ice) also closely reproduce the observed reflectance spectrum, suggesting that the presence of complex organic materials in the HR 4796 disk is still not definitive.