Anthropogenic skyglow dominates views of the natural night sky in most urban settings, and the associated emission of artificial light at night (ALAN) into the environment of cities involves a number of known and suspected negative externalities. One approach to lowering consumption of ALAN in cities is dimming or extinguishing publicly owned outdoor lighting during overnight hours; however, there are few reports in the literature about the efficacy of these programs. Here we report the results of one of the largest municipal lighting dimming experiments to date, involving $\sim$20,000 roadway luminaires owned and operated by the City of Tucson, Arizona, U.S. We analyzed both single-channel and spatially resolved ground-based measurements of broadband night sky radiance obtained during the tests, determining that the zenith sky brightness during the tests decreased by ($-5.4\pm0.9$)% near the city center and ($-3.6\pm0.9$)% at an adjacent suburban location on nights when the output of the street lighting system was dimmed from 90% of its full power draw to 30% after local midnight. Modeling these changes with a radiative transfer code yields results suggesting that street lights account for about ($14\pm1$)% of light emissions resulting in skyglow seen over the city. A separate derivation from first principles implies that street lighting contributes only 2-3% of light seen at the zenith over Tucson. We discuss this inconsistency and suggest routes for future work.

A demanding challenge in atmospheric research is the night-time characterization of aerosols using passive techniques, that is, by extracting information from scattered light that has not been emitted by the observer. Satellite observations of artificial night-time lights have been used to retrieve some basic integral parameters, like the aerosol optical depth. However, a thorough analysis of the scattering processes allows one to obtain substantially more detailed information on aerosol properties. In this Letter we demonstrate a practicable approach for determining the aerosol particle size number distribution function in the air column, based on the measurement of the angular radiance distribution of the scattered light emitted by night-time lights of cities and towns, recorded from low Earth orbit. The method is self-calibrating and does not require the knowledge of the absolute city emissions. The input radiance data are readily available from several spaceborne platforms, like the VIIRS-DNB radiometer onboard the Suomi-NPP satellite.

Determining the all-sky radiance distribution produced by artificial light sources is a computationally demanding task that generally requires an intensive calculation load. We develop in this work an analytic formulation that provides the all-sky radiance distribution produced by an artificial light source as an explicit and analytic function of the observation direction, depending on two single parameters that characterize the overall effects of the atmosphere. One of these parameters is related to the effective attenuation of the light beams, whereas the other accounts for the overall asymmetry of the combined scattering processes in molecules and aerosols. By means of this formulation a wide range of all-sky radiance distributions can be efficiently and accurately calculated in a short time. This substantial reduction in the number of required parameters, in comparison with other currently used approaches, is expected to facilitate the development of new applications in the field of light pollution research.

Active dark flows known as recurring slope lineae have been observed on the warmest slopes of equatorial Mars. The morphology, composition and seasonality of the lineae suggest a role of liquid water in their formation. However, internal and atmospheric sources of water appear to be insufficient to sustain the observed slope activity. Experimental evidence suggests that under the low atmospheric pressure at the surface of Mars, gas can flow upwards through porous Martian soil due to thermal creep under surface regions heated by the Sun, and disturb small particles. Here we present numerical simulations to demonstrate that such a dry process involving the pumping of rarefied gas in the Martian soil due to temperature contrasts can explain the formation of the recurring slope lineae. In our simulations, solar irradiation followed by shadow significantly reduces the angle of repose due to the resulting temporary temperature gradients over shaded terrain, and leads to flow at intermediate slope angles. The simulated flow locations are consistent with observed recurring slope lineae that initiate in rough and bouldered terrains with local shadows over the soil. We suggest that this dry avalanche process can explain the formation of the recurring slope lineae on Mars without requiring liquid water or CO2 frost activity.

The transition from earlier lighting technologies to white light-emitting diodes (LEDs) is a significant change in the use of artificial light at night. LEDs emit considerably more short-wavelength light into the environment than earlier technologies on a per-lumen basis. Radiative transfer models predict increased skyglow over cities transitioning to LED unless the total lumen output of new lighting systems is reduced. The City of Tucson, Arizona (U.S.), recently converted its municipal street lighting system from a mixture of fully shielded high- and low-pressure sodium (HPS/LPS) luminaires to fully shielded 3000 K white LED luminaires. The lighting design intended to minimize increases to skyglow in order to protect the sites of nearby astronomical observatories without compromising public safety. This involved the migration of over 445 million fully shielded HPS/LPS lumens to roughly 142 million fully shielded 3000 K white LED lumens and an expected concomitant reduction in the amount of visual skyglow over Tucson. SkyGlow Simulator models predict skyglow decreases on the order of 10-20% depending on whether fully shielded or partly shielded lights are in use. We tested this prediction using visual night sky brightness estimates and luminance-calibrated, panchromatic all-sky imagery at 15 locations in and near the city. Data were obtained in 2014, before the LED conversion began, and in mid-2017 after approximately 95% of $\sim$18,000 luminaires was converted. Skyglow differed marginally, and in all cases with valid data changed by $<{\pm}$20%. Over the same period, the city's upward-directed optical radiance detected from Earth orbit decreased by approximately 7%. While these results are not conclusive, they suggest that LED conversions paired with dimming can reduce skyglow over cities.

The Sky Quality Meter (SQM) has become the most common device to track the evolution of the brightness of the sky from polluted regions to first class astronomical observatories. A vast database of SQM measurements already exists for many places in the world. Unfortunately, the SQM operates over a wide spectral band and its spectral response interacts with the sky's spectrum in a complex manner. This is why the optical signals are difficult to interpret when the data are recorded in regions with different sources of artificial light. The brightness of the night sky is linked in a complex way to ground-based light emissions while taking into account atmospheric-induced optical distortion as well as spectral transformation from the underlying ground surfaces. While the spectral modulation of the sky's radiance has been recognized, it still remains poorly characterized and quantified. The impact of the SQM's spectral characteristics on the sky brightness measurements is here analysed for different light sources, including low and high pressure sodium lamps, PC-amber and white LEDs, metal halide, and mercury lamps. We show that a routine conversion of radiance to magnitude is difficult or rather impossible because the average wavelength depends on actual atmospheric and environment conditions, the spectrum of the source, and device specific properties. We correlate SQM readings with both the Johnson astronomical photometry bands and the human system of visual perception, assuming different lighting technologies. These findings have direct implications for the processing of SQM data and for its improvement and/or remediation.

There has been growing observational evidence for the presence of condensates in the atmospheres and/or comet-like tails of extrasolar planets. As a result, systematic and homogeneous tables of dust properties are useful in order to facilitate further observational and theoretical studies. In this paper we present calculations and analysis of non-isotropic phase functions, asymmetry parameter (mean cosine of the scattering angle), absorption and scattering opacities, single scattering albedos, equilibrium temperatures, and radiative accelerations of dust grains relevant for extrasolar planets. Our assumptions include spherical grain shape, Deirmendjian particle size distribution, and Mie theory. We consider several species: corundum/alumina, perovskite, olivines with 0\% and 50\% iron content, pyroxenes with 0\%, 20\% and 60\% iron content, pure iron, carbon at two different temperatures, water ice, liquid water, and ammonia. The presented tables cover the wavelength range of 0.2 to 500 micron and modal particle radii from 0.01 micron to 100 micron. Equilibrium temperatures and radiative accelerations assume irradiation by a non-black-body source of light with temperatures from 7000K to 700K seen at solid angles from 2$\pi$ to $10^{-6}$ sr. The tables are provided to the community together with a simple code which allows for an optional, finite, angular dimension of the source of light (star) in the phase function.

The illuminated dusty surface of Mars acts like a gas pump. It is driven by thermal creep at low pressure within the soil. In the top soil layer this gas flow has to be sustained by a pressure gradient. This is equivalent to a lifting force on the dust grains. The top layer is therefore under tension which reduces the threshold wind speed for saltation. We carried out laboratory experiments to quantify the thickness of this activated layer. We use basalt with an average particle size of 67 $\mu$m. We find a depth of the active layer of 100 to 200 $\rm \mu m$. Scaled to Mars the activation will reduce threshold wind speeds for saltation by about 10%.

Laboratory experiments show that dusty bodies in a gaseous environment eject dust particles if they are illuminated. We find that even more intense dust eruptions occur when the light source is turned off. We attribute this to a compression of gas by thermal creep in response to the changing temperature gradients in the top dust layers. The effect is studied at a light flux of 13 kW/(m*m) and 1 mbar ambient pressure. The effect is applicable to protoplanetary disks and Mars. In the inner part of protoplanetary disks, planetesimals can be eroded especially at the terminator of a rotating body. This leads to the production of dust which can then be transported towards the disk edges or the outer disk regions. The generated dust might constitute a significant fraction of the warm dust observed in extrasolar protoplanetary disks. We estimate erosion rates of about 1 kg/s for 100 m parent bodies. The dust might also contribute to subsequent planetary growth in different locations or on existing protoplanets which are large enough not to be susceptible to particle loss by light induced ejection. Due to the ejections, planetesimals and smaller bodies will be accelerated or decelerated and drift outward or inward, respectively. The effect might also explain the entrainment of dust in dust devils on Mars, especially at high altitudes where gas drag alone might not be sufficient.

The importance of the Poynting-Robertson effect on the motion of interplanetary dust particles is discussed. Precise numerical calculations for real dust particle show that condition for the validity of the Poynting-Robertson effect is not fulfilled. The interaction of the (solar) electromagnetic radiation with really shaped dust particle is different from that which yields the Poynting-Robertson effect. The magnitude of the Poynting-Robertson effect's deceleration term is in one to two orders in magnitude (it depends on particle's size) less important than terms corresponding to nonforward (or, nonbackward) scattering.