We perform collisionless N-body simulations to investigate whether binary mergers between rotationally-supported dwarfs can lead to the formation of dwarf spheroidal galaxies (dSphs). Our simulation campaign is based on a hybrid approach combining cosmological simulations and controlled numerical experiments. We select merger events from a Constrained Local UniversE (CLUES) simulation of the Local Group (LG) and record the properties of the interacting dwarf-sized halos. This information is subsequently used to seed controlled experiments of binary encounters between dwarf galaxies consisting of exponential stellar disks embedded in cosmologically-motivated dark matter halos. These simulations are designed to reproduce eight cosmological merger events, with initial masses of the interacting systems in the range ~ (5-60) x 10^7 Mo, occurring quite early in the history of the LG, more than 10 Gyr ago. We compute the properties of the merger remnants as a distant observer would and demonstrate that at least three of the simulated encounters produce systems with kinematic and structural properties akin to those of the classic dSphs in the LG. Tracing the history of the remnants in the cosmological simulation to z=0, we find that two dSph-like objects remain isolated at distances larger than 800 kpc from either the Milky Way or M31. These systems constitute plausible counterparts of the remote dSphs Cetus and Tucana which reside in the LG outskirts, far from the tidal influence of the primary galaxies. We conclude that merging of rotationally-supported dwarfs represents a viable mechanism for the formation of dSphs in the LG and similar environments.

Using a high resolution N-body simulation of a two-component dwarf galaxy orbiting in the potential of the Milky Way, we study two effects that lead to significant biases in mass estimates of dwarf spheroidal galaxies. Both are due to the strong tidal interaction of initially disky dwarfs with their host. The tidal stripping of dwarf stars leads to the formation of strong tidal tails that are typically aligned with the line of sight of an observer positioned close to the host center. The stars from the tails contaminate the kinematic samples leading to a velocity dispersion profile increasing with the projected radius and resulting in an overestimate of mass. The tidal stirring of the dwarf leads to the morphological transformation of the initial stellar disk into a bar and then a spheroid. The distribution of stars in the dwarf remains non-spherical for a long time leading to an overestimate of its mass if it is observed along the major axis and an underestimate if it seen in the perpendicular direction.

We use a simulation performed within the Constrained Local UniversE Simulation (CLUES) project to study a realistic Local Group-like object. We employ this group as a numerical laboratory for studying the evolution of the population of its subhaloes from the point of view of the effects it may have on the origin of different types of dwarf galaxies. We focus on the processes of tidal stripping of the satellites, their interaction, merging and grouping before infall. The tidal stripping manifests itself in the transition between the phase of mass accretion and mass loss seen in most subhaloes, which occurs at the moment of infall on to the host halo, and the change of the shape of their mass function with redshift. Although the satellites often form groups, they are loosely bound within them and do not interact with each other. The infall of a large group could however explain the observed peculiar distribution of the Local Group satellites, but only if it occurred recently. Mergers between prospective subhaloes are significant only during an early stage of evolution, i.e. more than 7 Gyr ago, when they are still outside the host haloes. Such events could thus contribute to the formation of more distant early type Milky Way companions. Once the subhaloes enter the host halo the mergers become very rare.

Using high-resolution N-body simulations we study the stellar properties of dwarf spheroidal galaxies resulting from the tidally induced morphological transformation of disky dwarfs on a cosmologically motivated eccentric orbit around the Milky Way. Dwarf galaxy models initially consist of an exponential stellar disk embedded in an extended spherical dark matter halo. Depending on the initial orientation of the disk with respect to the orbital plane, different final configurations are obtained. The least evolved dwarf is triaxial and retains a significant amount of rotation. The more evolved dwarfs are prolate spheroids with little rotation. We show that the final density distribution of stars can be approximated by a simple modification of the Plummer law. The kinematics of the dwarfs is significantly different depending on the line of sight which has important implications for mapping the observed stellar velocity dispersions of dwarfs to subhalo circular velocities. When the dwarfs are observed along the long axis, the measured velocity dispersion is higher and decreases faster with radius. In the case where rotation is significant, when viewed perpendicular to the long axis, the effect of minor axis rotation is detected, as expected for triaxial systems. We model the velocity dispersion profiles and rotation curves of the dwarfs by solving the Jeans equations for spherical and axisymmetric systems and adjusting different sets of free parameters. We find that the mass is typically overestimated when the dwarf is seen along the long axis and underestimated when the observation is along the short or intermediate axis. The effect of non-sphericity cannot however bias the inferred mass by more than 60 percent in either direction, even for the most strongly stripped dwarf which is close to disruption.

Using high-resolution collisionless N-body simulations we study the properties of tidal tails formed in the immediate vicinity of a two-component dwarf galaxy evolving in a static potential of the Milky Way (MW). The stellar component of the dwarf is initially in the form of a disk and the galaxy is placed on an eccentric orbit motivated by CDM-based cosmological simulations. We measure the orientation, density and velocity distribution of the stars in the tails. Due to the geometry of the orbit, in the vicinity of the dwarf, where the tails are densest and therefore most likely to be detectable, they are typically oriented towards the MW and not along the orbit. We report on an interesting phenomenon of `tidal tail flipping': on the way from the pericentre to the apocentre the old tails following the orbit are dissolved and new ones pointing towards the MW are formed over a short timescale. We also find a tight linear relation between the velocity of stars in the tidal tails and their distance from the dwarf. Using mock data sets we demonstrate that if dwarf spheroidal (dSph) galaxies in the vicinity of the MW are tidally affected their kinematic samples are very likely contaminated by tidally stripped stars which tend to artificially inflate the measured velocity dispersion. The effect is stronger for dwarfs on their way from the peri- to the apocentre due to the formation of new tidal tails after pericentre. Realistic mass estimates of dSph galaxies thus require removal of these stars from kinematic samples.

We conduct high-resolution collisionless N-body simulations to investigate the tidal evolution of dwarf galaxies on an eccentric orbit in the Milky Way (MW) potential. The dwarfs originally consist of a low surface brightness stellar disk embedded in a cosmologically motivated dark matter halo. During 10 Gyr of dynamical evolution and after 5 pericentre passages the dwarfs suffer substantial mass loss and their stellar component undergoes a major morphological transformation from a disk to a bar and finally to a spheroid. The bar is preserved for most of the time as the angular momentum is transferred outside the galaxy. A dwarf spheroidal (dSph) galaxy is formed via gradual shortening of the bar. This work thus provides a comprehensive quantitative explanation of a potentially crucial morphological transformation mechanism for dwarf galaxies that operates in groups as well as in clusters. We compare three cases with different initial inclinations of the disk and find that the evolution is fastest when the disk is coplanar with the orbit. Despite the strong tidal perturbations and mass loss the dwarfs remain dark matter dominated. For most of the time the 1D stellar velocity dispersion, \sigma, follows the maximum circular velocity, V_{\rm max}, and they are both good tracers of the bound mass. Specifically, we find that M_{\rm bound} \propto V_{\rm max}^{3.5} and V_{\rm max} \sim \sqrt{3} \sigma in agreement with earlier studies based on pure dark matter simulations. The latter relation is based on directly measuring the stellar kinematics of the simulated dwarf and may thus be reliably used to map the observed stellar velocity dispersions of dSphs to halo circular velocities when addressing the missing satellites problem.

We model the recently published kinematic data set for Leo I dSph galaxy by fitting the solutions of the Jeans equations to the velocity dispersion and kurtosis profiles measured from the data. We demonstrate that when the sample is cleaned of interlopers the data are consistent with the assumption that mass follows light and isotropic stellar orbits with no need for an extended dark matter halo. Our interloper removal scheme does not clean the data of contamination completely, as demonstrated by the rotation curve of Leo I. When moving away from the centre of the dwarf, the rotation appears to be reversed. We interpret this behaviour using the results of an N-body simulation of a dwarf galaxy possessing some intrinsic rotation, orbiting in the Milky Way potential and show that it can be reproduced if the galaxy is viewed almost along the tidal tails so that the leading (background) tail contaminates the western part of Leo I while the trailing (foreground) tail the eastern one. We show that this configuration leads to a symmetric and Gaussian distribution of line-of-sight velocities. The simulation is also applied to test our modelling method on mock data sets. We demonstrate that when the data are cleaned of interlopers and the fourth velocity moment is used the true parameters of the dwarf are typically within 1 \sigma errors of the best-fitting parameters. Restricting the fitting to the inner part of Leo I our best estimate for the anisotropy is \beta = -0.2^{+0.3}_{-0.4} and the total mass M = (4.5 +/- 0.7) x 10^7 M_sun. The mass-to-light ratio including the errors in mass, brightness and distance is M/L_V = 8.2 +/- 4.5 solar units.

We discuss how different approaches to selecting member stars in kinematic samples of dwarf spheroidal galaxies affect the estimates of their mass and anisotropy of stellar orbits. We demonstrate that the selection of members is an additional source of error compared to the usual uncertainties due to the sampling of velocity moments. As an example we use the kinematic data set for 202 stars in the Fornax dwarf galaxy for which we model the velocity dispersion profile and estimate the mass-to-light ratio and anisotropy assuming that mass follows light. We also show that stronger constraints on these parameters can be obtained if kurtosis of the velocity distribution is included in the analysis. Using the Besancon model of the Milky Way we demonstrate that the majority of contamination in Fornax probably comes from the Milky Way stars.

We study the origin and properties of the population of unbound stars in the kinematic samples of dwarf spheroidal galaxies. For this purpose we have run a high resolution N-body simulation of a two-component dwarf galaxy orbiting in a Milky Way potential. The dwarf is placed on a highly eccentric orbit, its initial stellar component is in the form of an exponential disk and it has a NFW-like dark matter halo. After 10 Gyrs of evolution the dwarf produces a spheroidal stellar component and is strongly tidally stripped so that mass follows light and the stars are on almost isotropic orbits. From this final state, we create mock kinematic data sets for 200 stars by observing the dwarf in different directions. We find that when the dwarf is observed along the tidal tails the kinematic samples are strongly contaminated by unbound stars from the tails. We also study another source of possible contamination by adding stars from the Milky Way. We demonstrate that most of the unbound stars can be removed by the method of interloper rejection proposed by den Hartog & Katgert. We model the cleaned-up kinematic samples using solutions of the Jeans equation with constant mass-to-light ratio and velocity anisotropy parameter. We show that the Jeans analysis, when applied to cleaned samples, allows us to reproduce the mass and mass-to-light ratio of the dwarf with accuracy typically better than 25 percent. The analysis was applied to the new data for the Fornax dSph galaxy. We show that after careful removal of interlopers the velocity dispersion profile of Fornax can be reproduced by a model in which mass traces light with a mass-to-light ratio of 11 solar units and isotropic orbits. We demonstrate that most of the contamination in the kinematic sample of Fornax probably originates from the Milky Way. (Abridged)