The understanding of (sub-)millimetre polarisation has made a leap forward since high-resolution imaging with ALMA came available. Amongst other effects, self-scattering (i.e., scattering of thermal dust emission on other grains) is thought to be the origin of millimetre polarisation. This opens the first window to a direct measurement of dust grain sizes in regions of optically thick continuum emission as it can be found in protoplanetary disks and star-forming regions. However, the newly derived values of grain sizes are usually around ${\sim}100\,\mu$m and thus one order of magnitude smaller than those obtained from more indirect measurements as well as those expected from theory (${\sim}1\,$mm). We see the origin of this contradiction in the applied dust model of today's self-scattering simulations: a perfect compact sphere. The aim of this study is to test our hypothesis by investigating the impact of non-spherical grain shapes on the self-scattering signal. We apply discrete dipole approximation simulations to investigate the influence of the grain shape on self-scattering polarisation in three scenarios: an unpolarised and polarised incoming wave under a fixed as well as a varying incident polarisation angle. We find significant deviations of the resulting self-scattering polarisation when comparing non-spherical to spherical grains, in particular outside the Rayleigh regime, i.e. for >100$\,\mu$m size grains observed at $870\,\mu$m wavelength. Self-scattering by oblate grains produces higher polarisation degrees compared to spheres which challenges the interpretation of the origin of observed millimetre polarisation. A (nearly) perfect alignment of the non-spherical grains is required to account for the observed millimetre polarisation in protoplanetary disks. Our findings point towards a necessary re-evaluation of the dust grain sizes derived from (sub-)mm polarisation.

Core-collapse supernovae can condense large masses of dust post-explosion. However, sputtering and grain-grain collisions during the subsequent passage of the dust through the reverse shock can potentially destroy a significant fraction of the newly formed dust before it can reach the interstellar medium. Here we show that in oxygen-rich supernova remnants like Cassiopeia A the penetration and trapping within silicate grains of the same impinging ions of oxygen, silicon and magnesium that are responsible for grain surface sputtering can significantly reduce the net loss of grain material. We model conditions representative of dusty clumps (density contrast $\chi=100$) passing through the reverse shock in the oxygen-rich Cassiopeia A remnant and find that, compared to cases where the effect is neglected, as well as facilitating the formation of grains larger than those that had originally condensed, ion trapping increases the surviving masses of silicate dust by factors of up to two to four, depending on initial grain radii. For higher density contrasts ($\chi\gtrsim180$), we find that the effect of gas accretion on the surface of dust grains surpasses ion trapping, and the survival rate increases to ${\sim}55 \%$ of the initial dust mass for $\chi=256$.

Observations of the ejecta of core-collapse supernovae have shown that dust grains form in over-dense gas clumps in the expanding ejecta. The clumps are later subject to the passage of the reverse shock and a significant amount of the newly formed dust material can be destroyed due to the high temperatures and high velocities in the post-shock gas. To determine dust survival rates, we have performed a set of hydrodynamic simulations using the grid-based code AstroBEAR in order to model a shock wave interacting with a clump of gas and dust. Afterwards, dust motions and dust destruction rates are computed using our newly developed external, post-processing code Paperboats, which includes gas and plasma drag, grain charging, kinematic and thermal sputtering as well as grain-grain collisions. We have determined dust survival rates for the oxygen-rich supernova remnant Cassiopeia A as a function of initial grain sizes, dust materials and clump gas densities.

The reverse shock in the ejecta of core-collapse supernovae is potentially able to destroy newly formed dust material. In order to determine dust survival rates, we have performed a set of hydrodynamic simulations using the grid-based code AstroBEAR in order to model a shock wave interacting with clumpy supernova ejecta. Dust motions and destruction rates were computed using our newly developed external, post-processing code Paperboats, which includes gas drag, grain charging, sputtering and grain-grain collisions. We have determined dust destruction rates for the oxygen-rich supernova remnant Cassiopeia A as a function of initial grain sizes and clump gas density. We found that up to 30 % of the carbon dust mass is able to survive the passage of the reverse shock if the initial grain size distribution is narrow with radii around ~10 - 50 nm for high gas densities, or with radii around ~0.5 - 1.5 ${\mu}$m for low and medium gas densities. Silicate grains with initial radii around 10 - 30 nm show survival rates of up to 40 % for medium and high density contrasts, while silicate material with micron sized distributions is mostly destroyed. For both materials, the surviving dust mass is rearranged into a new size distribution that can be approximated by two components: a power-law distribution of small grains and a log-normal distribution of grains having the same size range as the initial distribution. Our results show that grain-grain collisions and sputtering are synergistic and that grain-grain collisions can play a crucial role in determining the surviving dust budget in supernova remnants.

ALMA observations revealed recently polarised radiation of several protoplanetary disks in the (sub-)millimetre wavelength range. Besides self-scattering of large particles, thermal emission by elongated grains is a potential source for the detected polarisation signal. We calculate the wavelength dependent absorption and intrinsic polarisation of spheroidally shaped, micrometre and sub-millimetre sized dust grains using the discrete dipole approximation. In particular, we analyse the impact of dust grain porosity which appears to be present in disks when small grains coagulate to form larger aggregates. For the first time our results show that (a) the intrinsic polarisation decreases for increasing grain porosity and (b) the polarisation orientation flips by 90 degree for certain ratios of wavelength to grain size. We present a new method to constrain grain porosity and the grain size in protoplanetary disks using multi-wavelength polarisation observations in the far-infrared to millimetre wavelengths. Finally, we find that moderate grain porosities ($\mathcal{P}\lesssim0.7$) potentially explain the observed polarisation fraction in the system HD 142527 while highly porous grains ($\mathcal{P}>0.7$) fail unless the grain's axis ratio is extraordinarily large.

Context: Since circumstellar dust in debris disks is short-lived, dust-replenishing requires the presence of a reservoir of planetesimals. These planetesimals in the parent belt of debris disks orbit their host star and continuously supply the disk with fine dust through their mutual collisions. Aims: We aim to understand effects of different collisional parameters on the observational appearance of eccentric debris disks. Methods: The collisional evolution of selected debris disk configurations was simulated with the numerical code ACE. Subsequently, selected observable quantities are simulated with our newly developed code DMS. The impact of the eccentricity, dynamical excitation, and the material strength is discussed with respect to the grain size distribution, the spectral energy distribution, and spatially resolved images of debris disk systems. Results: The most recognizable features in different collisional evolutions are as follows. First, both the increase of dynamical excitation in the eccentric belt of the debris disk system and the decrease of the material strength of dust particles result in a higher production rate of smaller particles. This reduces the surface brightness differences between the periastron and the apastron sides of the disks. For very low material strengths, the "pericenter glow" phenomenon is reduced and eventually even replaced by the opposite effect, the "apocenter glow". Second, it is possible to constrain the level of collisional activity from the appearance of the disk, for example, the wavelength-dependent apocenter-to-pericenter flux ratio. Within the considered parameter space, the impact of the material strength on the appearance of the disk is stronger than that of dynamical excitation of the system. Finally, we find that the impact of the collisional parameters on the net spectral energy distribution is weak.

We present new data of the protoplanetary disc surrounding the Herbig Ae/Be star HD 169142 obtained in the very broad-band (VBB) with the Zurich imaging polarimeter (ZIMPOL), a sub-system of the Spectro-Polarimetric High-contrast Exoplanet REsearch instrument (SPHERE) at the Very Large Telescope (VLT). Our Polarimetric Differential Imaging (PDI) observations probe the disc as close as 0.03" (3.5au) to the star and are able to trace the disc out to ~1.08" (~126au). We find an inner hole, a bright ring bearing substructures around 0.18" (21au), and an elliptically shaped gap stretching from 0.25" to 0.47" (29-55au). Outside of 0.47", the surface brightness drops off, discontinued only by a narrow annular brightness minimum at ~0.63"-0.74" (74-87au). These observations confirm features found in less-well resolved data as well as reveal yet undetected indications for planet-disc interactions, such as small-scale structures, star-disk offsets, and potentially moving shadows.

Hot exozodiacal dust emission was detected in recent surveys around two dozen main sequence stars at distances of less than $1\,\text{au}$ using H and K band interferometry. Due to the high contrast as well as the small angular distance between the circumstellar dust and the star, direct observation of this dust component is challenging. An alternative way to explore the hot exozodiacal dust is provided by mid-infrared interferometry. We analyze the L, M and N band interferometric signature of this emission in order to find stronger constraints for the properties and the origin of the hot exozodiacal dust. Considering the parameters of nine debris disc systems derived previously, we model the discs in each of these bands. We find that the M band possesses the best conditions to detect hot dust emission, closely followed by L and N bands. The hot dust in three systems - HD 22484 (10 Tau), HD 102647 ($\beta$ Leo) and HD 177724 ($\zeta$ Aql) - shows a strong signal in the visibility functions which may even allow one to constrain the dust location. In particular, observations in the mid-infrared could help to determine whether the dust piles up at the sublimation radius or is located at radii up to $1\,\text{au}$. In addition, we explore observations of the hot exozodiacal dust with the upcoming mid-infrared interferometer MATISSE at the Very Large Telescope Interferometer (VLTI).

Context: High-resolution images of circumstellar debris discs reveal off-centred rings that indicate past or ongoing perturbation, possibly caused by secular gravitational interaction with unseen stellar or substellar companions. The purely dynamical aspects of this departure from radial symmetry are well understood. However, the observed dust is subject to additional forces and effects, most notably collisions and drag. Aims: To complement the studies of dynamics, we therefore aim to understand how new asymmetries are created by the addition of collisional evolution and drag forces, and existing ones strengthened or overridden. Methods: We augmented our existing numerical code "Analysis of Collisional Evolution" (ACE) by an azimuthal dimension, the longitude of periapse. A set of fiducial discs with global eccentricities ranging from 0 to 0.4 is evolved over giga-year timescales. Size distribution and spatial variation of dust are analysed and interpreted. The basic impact of belt eccentricity on spectral energy distributions (SEDs) and images is discussed. Results: We find features imposed on characteristic timescales. First, radiation pressure defines size cutoffs that differ between periapse and apoapse, resulting in an asymmetric halo. The differences in size distribution make the observable asymmetry of the halo depend on wavelength. Second, collisional equilibrium prefers smaller grains on the apastron side of the parent belt, reducing the effect of pericentre glow and the overall asymmetry. Third, Poynting-Robertson drag fills the region interior to an eccentric belt such that the apastron side is more tenuous. Interpretation and prediction of the appearance in scattered light is problematic when spatial and size distribution are coupled.

Recent interferometric surveys of nearby main-sequence stars show a faint but significant near-infrared excess in roughly two dozen systems, i.$\,$e. around $10\,\%$ to $30\,\%$ of stars surveyed. This excess is attributed to dust located in the immediate vicinity of the star, the origin of which is highly debated. We used previously published interferometric observations to constrain the properties and distribution of this hot dust. Considering both scattered radiation and thermal reemission, we modelled the observed excess in nine of these systems. We find that grains have to be sufficiently absorbing to be consistent with the observed excess, while dielectric grains with pure silicate compositions fail to reproduce the observations. The dust should be located within $\sim\,0.01-1\,au$ from the star depending on its luminosity. Furthermore, we find a significant trend for the disc radius to increase with the stellar luminosity. The dust grains are determined to be below $0.2-0.5\,\mu\textrm{m}$, but above $0.02-0.15\,\mu\textrm{m}$ in radius. The dust masses amount to $(0.2-3.5)\times10^{-9}\,M_\oplus$. The near-infrared excess is probably dominated by thermal reemission, though a contribution of scattered light up to $35\,\%$ cannot be completely excluded. The polarisation degree predicted by our models is always below $5\,\%$, and for grains smaller than $\sim0.2\,\mu\textrm{m}$ even below $1\,\%$. We also modelled the observed near-infrared excess of another ten systems with poorer data in the mid-infrared. The basic results for these systems appear qualitatively similar, yet the constraints on the dust location and the grain sizes are weaker.

Debris discs are often modelled assuming compact dust grains, but more and more evidence for the presence of porous grains is found. We aim at quantifying the systematic errors introduced when modelling debris discs composed of porous dust with a disc model assuming spherical, compact grains. We calculate the optical dust properties derived via the fast, but simple effective medium theory. The theoretical lower boundary of the size distribution -- the so-called 'blowout size' -- is compared in the cases of compact and porous grains. Finally, we simulate observations of hypothetical debris discs with different porosities and feed them into a fitting procedure using only compact grains. The deviations of the results for compact grains from the original model based on porous grains are analysed. We find that the blowout size increases with increasing grain porosity up to a factor of two. An analytical approximation function for the blowout size as a function of porosity and stellar luminosity is derived. The analysis of the geometrical disc set-up, when constrained by radial profiles, are barely affected by the porosity. However, the determined minimum grain size and the slope of the grain size distribution derived using compact grains are significantly overestimated. Thus, the unexpectedly high ratio of minimum grain size to blowout size found by previous studies using compact grains can be partially described by dust grain porosity, although the effect is not strong enough to completely explain the trend.

Protoplanetary disks are a byproduct of the star formation process. In the dense mid-plane of these disks, planetesimals and planets are expected to form. The first step in planet formation is the growth of dust particles from submicrometer-sized grains to macroscopic mm-sized aggregates. The grain growth is accompanied by radial drift and vertical segregation of the particles within the disk. To understand this essential evolutionary step, spatially resolved multi-wavelength observations as well as photometric data are necessary which reflect the properties of both disk and dust. We present the first spatially resolved image obtained with NACO at the VLT in the L$_\text{p}$ band of the near edge-on protoplanetary disk FS Tau B. Based on this new image, a previously published Hubble image in H band and the spectral energy distribution from optical to millimeter wavelengths, we derive constraints on the spatial dust distribution and the progress of grain growth. For this purpose we perform a disk modeling using the radiative transfer code MC3D. Radial drift and vertical sedimentation of the dust are not considered. We find a best-fit model which features a disk extending from $2\,\text{AU}$ to several hundreds AU with a moderately decreasing surface density and $M_\text{disk}=2.8\,\times\,10^{-2}\,\text{M}_\odot$. The inclination amounts to $i=80^\circ$. Our findings indicate that substantial dust grain growth has taken place and that grains of a size equal to or larger than $1\,\text{mm}$ are present in the disk. In conclusion, the parameters describing the vertical density distribution are better constrained than those describing the radial disk structure.

Many debris discs reveal a two-component structure, with an outer Kuiper-belt analogue and a warm inner component whose origin is still a matter of debate. One possibility is that warm emission stems from an "asteroid belt" closer in to the star. We consider a scenario in which a set of giant planets is formed in an initially extended planetesimal disc. These planets carve a broad gap around their orbits, splitting up the disc into the outer and the inner belts. After the gas dispersal, both belts undergo collisional evolution in a steady-state regime. This scenario is explored with detailed collisional simulations involving realistic physics to describe a long-term collisional depletion of the two-component disc. We find that the inner disc may be able to retain larger amounts of material at older ages than thought before on the basis of simplified analytic models. We show that the proposed scenario is consistent with a suite of thermal emission and scattered light observational data for a bright two-temperature debris disc around a nearby solar-type star q$^1$ Eridani. This implies a Solar System-like architecture of the system, with an outer massive "Kuiper belt", an inner "asteroid belt", and a few Neptune- to Jupiter-mass planets in between.

Debris discs are a consequence of the planet formation process and constitute the fingerprints of planetesimal systems. Their solar system's counterparts are the asteroid and Edgeworth-Kuiper belts. The aim of this paper is to provide robust numbers for the incidence of debris discs around FGK stars in the solar neighbourhood. The full sample of 177 FGK stars with d<20 pc proposed for the DUNES survey is presented. Herschel/PACS observations at 100 and 160 micron complemented with data at 70 micron, and at 250, 350 and 500 micron SPIRE photometry, were obtained. The 123 objects observed by the DUNES collaboration were presented in a previous paper. The remaining 54 stars, shared with the DEBRIS consortium and observed by them, and the combined full sample are studied in this paper. The incidence of debris discs per spectral type is analysed and put into context together with other parameters of the sample, like metallicity, rotation and activity, and age. The subsample of 105 stars with d<15 pc containing 23 F, 33 G and 49 K stars, is complete for F stars, almost complete for G stars and contains a substantial number of K stars to draw solid conclusions on objects of this spectral type. The incidence rates of debris discs per spectral type 0.26 (6 objects with excesses out of 23 F stars), 0.21 (7 out of 33 G stars) and 0.20 (10 out of 49 K stars), the fraction for all three spectral types together being 0.22 (23 out of 105 stars). Uncertainties corresponding to a 95% confidence level are given in the text for all these numbers. The medians of the upper limits of L_dust/L_* for each spectral type are 7.8E-7 (F), 1.4E-6 (G) and 2.2E-6 (K); the lowest values being around 4.0E-7. The incidence of debris discs is similar for active (young) and inactive (old) stars. The fractional luminosity tends to drop with increasing age, as expected from collisional erosion of the debris belts.

Cool debris discs are a relic of the planetesimal formation process around their host star, analogous to the solar system's Edgeworth-Kuiper belt. As such, they can be used as a proxy to probe the origin and formation of planetary systems like our own. The Herschel Open Time Key Programmes "DUst around NEarby Stars" (DUNES) and "Disc Emission via a Bias-free Reconnaissance in the Infrared/Submillimetre" (DEBRIS) observed many nearby, sun-like stars at far-infrared wavelengths seeking to detect and characterize the emission from their circumstellar dust. Excess emission attributable to the presence of dust was identified from around $\sim$ 20% of stars. Herschel's high angular resolution ($\sim$ 7" FWHM at 100 $\mu$m) provided the capacity for resolving debris belts around nearby stars with radial extents comparable to the solar system (50 to 100 au). As part of the DUNES and DEBRIS surveys, we obtained observations of three debris disc stars, HIP 22263 (HD 30495), HIP 62207 (HD 110897), and HIP 72848 (HD 131511), at far-infrared wavelengths with the Herschel PACS instrument. Combining these new images and photometry with ancilliary data from the literature, we undertook simultaneous multi-wavelength modelling of the discs' radial profiles and spectral energy distributions using three different methodologies: single annulus, modified black body, and a radiative transfer code. We present the first far-infrared spatially resolved images of these discs and new single-component debris disc models. We characterize the capacity of the models to reproduce the disc parameters based on marginally resolved emission through analysis of two sets of simulated systems (based on the HIP 22263 and HIP 62207 data) with the noise levels typical of the Herschel images. We find that the input parameter values are recovered well at noise levels attained in the observations presented here.

We theoretically analyze protoplanetary disks consisting of porous dust grains. In the analysis of observations of protoplanetary disks the dust phase is often assumed to consist of spherical grains, allowing one to apply the Mie scattering formalism. However, in reality, the shape of dust grains is expected to deviate strongly from that of a sphere. We investigate the influence of porous dust grains on the temperature distribution and observable appearance of protoplanetary disks for dust grain porosities of up to 60 %. We performed radiative transfer modeling to simulate the temperature distribution, spectral energy distribution, and spatially resolved intensity and polarization maps. The optical properties of porous grains were calculated using the method of discrete dipole approximation. We find that the flux in the optical wavelength range is for porous grains higher than for compact, spherical grains. The profile of the silicate peak at 9.7 um strongly depends on the degree of grain porosity. The temperature distribution shows significant changes in the direction perpendicular to the midplane. Moreover, simulated polarization maps reveal an increase of the polarization degree by a factor of about four when porous grains are considered, regardless of the disk inclination. The polarization direction is reversed in selected disk regions, depending on the wavelength, grain porosity, and disk inclination. We discuss several possible explanations of this effect and find that multiple scattering explains the effect best. Porosity influences the observable appearance of protoplanetary disks. In particular, the polarization reversal shows a dependence on grain porosity. The physical conditions within the disk are altered by porosity, which might have an effect on the processes of grain growth and disk evolution.

[abridged] Aims. Our Herschel Open Time Key Programme DUNES aims at detecting and characterizing debris disks around nearby, sun-like stars. In addition to the statistical analysis of the data, the detailed study of single objects through spatially resolving the disk and detailed modeling of the data is a main goal of the project. Methods. We obtained the first observations spatially resolving the debris disk around the sun-like star HIP 17439 (HD23484) using the instruments PACS and SPIRE on board the Herschel Space Observatory. Simultaneous multi-wavelength modeling of these data together with ancillary data from the literature is presented. Results. A standard single component disk model fails to reproduce the major axis radial profiles at 70 um, 100 um, and 160 um simultaneously. Moreover, the best-fit parameters derived from such a model suggest a very broad disk extending from few au up to few hundreds of au from the star with a nearly constant surface density which seems physically unlikely. However, the constraints from both the data and our limited theoretical investigation are not strong enough to completely rule out this model. An alternative, more plausible, and better fitting model of the system consists of two rings of dust at approx. 30 au and 90 au, respectively, while the constraints on the parameters of this model are weak due to its complexity and intrinsic degeneracies. Conclusions. The disk is probably composed of at least two components with different spatial locations (but not necessarily detached), while a single, broad disk is possible, but less likely. The two spatially well-separated rings of dust in our best-fit model suggest the presence of at least one high mass planet or several low-mass planets clearing the region between the two rings from planetesimals and dust.

When modeling the density and grain size distribution in debris disks, the minimum particle size is often significantly larger than the corresponding blowout size. While the dust particles are usually modeled as compact, homogenous spheres, we instead investigate the impact of porosity. The optical properties of porous particles are determined, and the influences of porosity on the blowout size and dust temperatures investigated. Using the method of discrete dipole approximation, we calculate the scattering and absorption cross sections of porous particles and derive the blowout size and the behavior of the dust temperature. We investigate the influence on the beta-ratio. Blowout sizes are calculated for various stellar luminosities and porosities, and an approximation equation is derived to estimate the blowout size as a function of these parameters. Furthermore, we investigate the influence of the porosity on the dust equilibrium temperature. The blowout size increases with the particle porosity and stellar luminosity. The dust temperature of porous particles is lower than the one of the compact spheres, in particular the temperature of blowout grains decreases for porous particles.