As part of a study funded by NASA Headquarters, we are developing a Probe-class mission concept called the Cosmic Evolution Through UV Spectroscopy (CETUS). CETUS includes a 1.5-m aperture diameter telescope with a large field-of-view (FOV). CETUS includes three scientific instruments: a Far Ultraviolet (FUV) and Near Ultraviolet (NUV) imaging camera (CAM); a NUV Multi-Object Spectrograph (MOS); and a dual-channel Point Source Spectrograph (PSS) in the Lyman Ultraviolet (LUV), FUV, and NUV spectral regions. The large FOV Three Mirror Anastigmatic (TMA) Optical Telescope Assembly (OTA) simultaneously feeds the three separate scientific instruments. That is, the instruments view separate portions of the TMA image plane, enabling parallel operation of the three instruments. The field viewed by the MOS, whose design is based on an Offner-type spectrographic configuration to provide wide FOV correction, is actively configured to select and isolate numerous field sources using a next-generation Micro-Shutter Array (MSA). The two-channel camera design is also based on an Offner-like configuration. The Point Source Spectrograph (PSS) performs high spectral resolution spectroscopy on unresolved objects over the NUV region with spectral resolving power, R~ 40,000, in an echelle mode. The PSS also performs long-slit imaging spectroscopy at R~ 20,000 in the LUV and FUV spectral regions with two aberration-corrected, blazed, holographic gratings used in a Rowland-like configuration. The optical system also includes two Fine Guidance Sensors (FGS), and Wavefront Sensors (WFS) that sample numerous locations over the full OTA FOV. In-flight wavelength calibration is performed by a Wavelength Calibration System (WCS), and flat-fielding is also performed, both using in-flight calibration sources. This paper will describe the current optical design and the major trade studies leading to the design.

The mission concept, Cosmic Origins Through UV Surveys (CETUS) is an all-UV space mission concept that was selected and funded by NASA for study in 2017. The main capabilities of CETUS that even Hubble doesn't have are: (1) wide-field (17.4'x17.4') imaging and spectroscopy of astronomical sources with <0.5'' resolution; (2) spectral sensitivity to UV radiation at wavelengths as short as 1000 {\AA}; (3) near-UV multi-object slit spectroscopy; and (4) rapid-response UV spectroscopy and deep imaging of transients like GW 170817; and (5) 23 times higher sensitivity to extended sources. The main purposes of this CETUS Final Report are to describe the CETUS scientific program and to demonstrate the maturity of its instrumentation, which forms the basis of its estimated cost. While there are similarities of this Final Report to that submitted to NASA in March 2019 by the Goddard Space Flight Center, there are important differences including the following. * Science. The science case has been refreshed, deepened, and expanded as a result of ideas and recommendations expressed in the Astro2020 science white papers. * Instrumentation. Detailed investigations including a high-level error budget for focus with implications for thermal management, target acquisition in the MOS micro-shutter array, contamination control have been carried out. * Mission Design. The spacecraft and mission operations concepts as developed by NGIS Gilbert (formerly Orbital ATK) rather than the output of Goddard's Mission Design Lab have been adopted.. * Technology. Technology maturation plans have been updated.

The Advanced Technology Large-Aperture Space Telescope (ATLAST) is a set of mission concepts for the next generation of UVOIR space observatory with a primary aperture diameter in the 8-m to 16-m range that will allow us to perform some of the most challenging observations to answer some of our most compelling questions, including "Is there life elsewhere in the Galaxy?" We have identified two different telescope architectures, but with similar optical designs, that span the range in viable technologies. The architectures are a telescope with a monolithic primary mirror and two variations of a telescope with a large segmented primary mirror. This approach provides us with several pathways to realizing the mission, which will be narrowed to one as our technology development progresses. The concepts invoke heritage from HST and JWST design, but also take significant departures from these designs to minimize complexity, mass, or both. Our report provides details on the mission concepts, shows the extraordinary scientific progress they would enable, and describes the most important technology development items. These are the mirrors, the detectors, and the high-contrast imaging technologies, whether internal to the observatory, or using an external occulter. Experience with JWST has shown that determined competitors, motivated by the development contracts and flight opportunities of the new observatory, are capable of achieving huge advances in technical and operational performance while keeping construction costs on the same scale as prior great observatories.