The BIOSTIRLING - 4SKA (B4S) is a EU demonstration project dealing with the implementation of a cost-effective and efficient new generation of solar dish-Stirling plants based on hybridization and efficient storage at the industrial scale. The main goal of the B4S demonstration project is the generation of electric power using simultaneously solar power and gas to supply an isolated system and act as a scalable example of potential power supply for many infrastructures, including future sustainable large scientific infrastructures. B4S build an interdisciplinary approach to address reliability, maintainability and costs of this technology. In April 2017, B4S successfully tested in Portugal the first world Stirling hybrid system providing about 4kW of power to a phased array of antennas, overcoming challenges in Stirling and hybridization and smartgrid technologies. B4SKA Consortium, with fourteen companies from six European countries, has performed the engineering, construction, assembly and experimental exploitation, under contract signed with the European to develop on off-grid demonstrator in Contenda (Moura) Portugal.

Measurement of the Galactic neutral atomic hydrogen (HI) column density, NHI, and brightness temperatures, Tb, is of high scientific value for a broad range of astrophysical disciplines. In the past two decades, one of the most-used legacy HI datasets has been the Leiden/Argentine/Bonn Survey (LAB). We release the HI 4$\pi$ survey (HI4PI), an all-sky database of Galactic HI, which supersedes the LAB survey. The HI4PI survey is based on data from the recently completed first coverage of the Effelsberg-Bonn HI Survey (EBHIS) and from the third revision of the Galactic All-Sky Survey (GASS). EBHIS and GASS share similar angular resolution and match well in sensitivity. Combined, they are ideally suited to be a successor to LAB. The new HI4PI survey outperforms the LAB in angular resolution (16.2', FWHM) and sensitivity (RMS: 43 mK). Moreover, it has full spatial sampling and thus overcomes a major drawback of LAB, which severely undersamples the sky. We publish all-sky column density maps of the neutral atomic hydrogen in the Milky Way, along with full spectroscopic data, in several map projections including HEALPix.

The Effelsberg-Bonn HI Survey (EBHIS) is a new 21-cm survey performed with the 100-m telescope at Effelsberg. It covers the whole northern sky out to a redshift of z~0.07 and comprises HI line emission from the Milky Way and the Local Volume. We aim to substitute the northern-hemisphere part of the Leiden/Argentine/Bonn Milky Way HI survey (LAB) with this first EBHIS data release, which presents the HI gas in the Milky Way regime. The use of a seven-beam L-band array made it feasible to perform this all-sky survey with a 100-m class telescope in a reasonable amount of observing time. State-of-the-art fast-Fourier-transform spectrometers provide the necessary data read-out speed, dynamic range, and spectral resolution to apply software radio-frequency interference mitigation. EBHIS is corrected for stray radiation and employs frequency-dependent flux-density calibration and sophisticated baseline-removal techniques to ensure the highest possible data quality. Detailed analyses of the resulting data products show that EBHIS is not only outperforming LAB in terms of sensitivity and angular resolution, but also matches the intensity-scale of LAB extremely well, allowing EBHIS to be used as a drop-in replacement for LAB. Data products are made available to the public in a variety of forms. Most important, we provide a properly gridded Milky Way HI column density map in HEALPix representation. To maximize the usefulness of EBHIS data, we estimate uncertainties in the HI column density and brightness temperature distributions, accounting for systematic effects.

In recent years cosmology has undergone a revolution, with precise measurements of the microwave background radiation, large galaxy redshift surveys, and the discovery of the recent accelerated expansion of the Universe using observations of distant supernovae. In this light, the SKA enables us to do an ultimate test in cosmology by measuring the expansion rate of the Universe in real time. This can be done by a rather simple experiment of observing the neutral hydrogen (HI) signal of galaxies at two different epochs. The signal will encounter a change in frequency imprinted as the Universe expands over time and thus monitoring the drift in frequencies will provide a real time measure of the cosmic acceleration. Over a period of 12 years one would expected a frequency shift of the order of 0.1 Hz assuming a standard Lambda-CDM cosmology. Based on the sensitivity estimates of the SKA and the number counts of the expected HI galaxies, it is shown that the number counts are sufficiently high to compensate for the observational uncertainties of the measurements and hence allow a statistical detection of the frequency shift. [abstract abridged]

The Square Kilometer Array (SKA) will be the largest Global science project of the next two decades. It will encompass a sensor network dedicated to radioastronomy, covering two continents. It will be constructed in remote areas of South Africa and Australia, spreading over 3000Km, in high solar irradiance latitudes. Solar Power supply is therefore an option to power supply the SKA and contribute to a zero carbon footprint next generation telescope. Here we outline the major characteristics of the SKA and some innovation approaches on thermal solar energy Integration with SKA prototypes.

Context: Radio astronomical receivers are now expanding their frequency range to cover large (octave) fractional bandwidths for sensitivity and spectral flexibility, which makes the design of good analogue circular polarizers challenging. Better polarization purity requires a flatter phase response over increasingly wide bandwidth, which is most easily achieved with digital techniques. They offer the ability to form circular polarization with perfect polarization purity over arbitrarily wide fractional bandwidths, due to the ease of introducing a perfect quadrature phase shift. Further, the rapid improvements in field programmable gate arrays provide the high processing power, low cost, portability and reconfigurability needed to make practical the implementation of the formation of circular polarization digitally. Aims: Here we explore the performance of a circular polarizer implemented with digital techniques. Methods: We designed a digital circular polarizer in which the intermediate frequency signals from a receiver with native linear polarizations were sampled and converted to circular polarization. The frequency-dependent instrumental phase difference and gain scaling factors were determined using an injected noise signal and applied to the two linear polarizations to equalize the transfer characteristics of the two polarization channels. This equalization was performed in 512 frequency channels over a 512 MHz bandwidth. Circular polarization was formed by quadrature phase shifting and summing the equalized linear polarization signals. Results: We obtained polarization purity of -25 dB corresponding to a D-term of 0.06 over the whole bandwidth. Conclusions: This technique enables construction of broad-band radio astronomy receivers with native linear polarization to form circular polarization for VLBI.

The new L-band 7-feed-array at the 100-m telescope in Effelsberg will be used to perform an unbiased fully sampled HI survey of the entire northern hemisphere observing the galactic and extragalactic sky using simultaneously two different backends. The survey will be extremely valuable for a broad range of research topics: study of the low-mass end of the HI mass function (HIMF) in the local volume, environmental and evolutionary effects (as seen in the HIMF), the search for galaxies near low-redshift Lyman-alpha absorbers, and analysis of multiphase and extraplanar gas, HI shells, and ultra-compact high-velocity-clouds.

We demonstrate phase correction of 3 mm VLBI observations using the scanning 18 GHz to 26 GHz water vapour radiometer at Effelsberg and we demonstrate an absolute accuracy of 15 mm in zenith path delay by comparing with GPS and radiosondes. This accuracy should provide significant improvement in astrometric phase referencing observations. It is not good enough for geodetic VLBI to replace the tropospheric delay estimation but could be used to remove short-term path-length fluctuations and so improve the geodetic observables. We discuss lessons learned and opportunities for further improvement.