We present new observations of the active star-formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope (JCMT) B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (~ 1.5 pc x 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multi-scale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ~ 1 pc and remains continuous from the scales of filaments (~ 0.1 pc) to that of protostellar envelopes (~ 0.005 pc or ~ 1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data towards the filament network.

GW Ori is a hierarchical triple system which has a rare circumtriple disk. We present Atacama Large Millimeter/submillimeter Array (ALMA) observations of 1.3 mm dust continuum and 12CO J=2-1 molecular gas emission of the disk. For the first time, we identify three dust rings in the disk at ~46, 188, and 338 AU, with estimated dust mass of ~70-250 Earth masses, respectively. To our knowledge, the outer ring in GW Ori is the largest dust ring ever found in protoplanetary disks. We use visibility modelling of dust continuum to show that the disk has misaligned parts and the innermost dust ring is eccentric. The disk misalignment is also suggested by the CO kinematics modelling. We interpret these substructures as evidence of ongoing dynamical interactions between the triple stars and the circumtriple disk.

With an emphasis on improving the fidelity even in super-resolution regimes, new imaging techniques have been intensively developed over the last several years, which may provide substantial improvements to the interferometric observation of protoplanetary disks. In this study, sparse modeling (SpM) is applied for the first time to observational data sets taken by the Atacama Large Millimeter/submillimeter Array (ALMA). The two data sets used in this study were taken independently using different array configurations at Band 7 (330 GHz), targeting the protoplanetary disk around HD 142527; one in the shorter-baseline array configuration (~ 430 m), and the other in the longer-baseline array configuration (~ 1570 m). The image resolutions reconstructed from the two data sets are different by a factor of ~ 3. We confirm that the previously known disk structures appear on the images produced by both SpM and CLEAN at the standard beam size. The image reconstructed from the shorter-baseline data using the SpM matches that obtained with the longer-baseline data using CLEAN, achieving a super-resolution image from which a structure finer than the beam size can be reproduced. Our results demonstrate that on-going intensive development in the SpM imaging technique is beneficial to imaging with ALMA.

Dust continuum observation is one of the best methods to constrain the properties of protoplanetary disks. Recent theoretical studies have suggested that the dust scattering at the millimeter wavelength potentially reduces the observed intensity, which results in an underestimate in the dust mass. We investigate whether the dust scattering indeed reduces the observed continuum intensity by comparing the ALMA archival data of the TW Hya disk at Band 3, 4, 6, 7 and 9 to models obtained by radiative transfer simulations. We find that the model with scattering by 300 ${\rm \mu m}$-sized grains well reproduces the observed SED of the central part of the TW Hya disk while the model without scattering is also consistent within the errors of the absolute fluxes. To explain the intensity at Band 3, the dust surface density needs to be $\sim$ 10 ${\rm g\,cm^{-2}}$ at 10 au in the model with scattering, which is 26 times more massive than previously predicted. The model without scattering needs 2.3 times higher dust mass than the model with scattering because it needs lower temperature. At Band 7, scattering reduces the intensity by $\sim$ 35% which makes the disk looks optically thin even though it is optically thick. Our study suggests the TW Hya disk is still capable of forming cores of giant planets at where the current solar system planets exist.

We observe the dust continuum at 225 GHz and CO isotopologue (12CO, 13CO, and C18O) J=2-1 emission lines toward the CR Cha protoplanetary disk using the Atacama Large Millimeter/Submillimeter Array (ALMA). The dust continuum image shows a dust gap-ring structure in the outer region of the dust disk. A faint dust ring is also detected around 120 au beyond the dust gap. The CO isotopologue lines indicate that the gas disk is more extended than the dust disk. The peak brightness temperature of the 13CO line shows a small bump around 130 au while 12CO and C18O lines do not show. We investigate two possible mechanisms for reproducing the observed dust gap-ring structure and a gas temperature bump. First, the observed gap structure can be opened by a Jupiter mass planet using the relation between the planet mass and the gap depth and width. Meanwhile, the radiative transfer calculations based on the observed dust surface density profile show that the observed dust ring could be formed by dust accumulation at the gas temperature bump, that is, the gas pressure bump produced beyond the outer edge of the dust disk.

The HD 163296 disk shows ring and gap substructures with ALMA observations. In addition, this is the only disk where the rings and gaps are spatially resolved in millimeter-wave polarization measurements. In this paper, we conduct radiative transfer modeling that includes self-scattering polarization to constrain the grain size and its distribution. We found that the grain size and dust scale height are the key parameters for reproducing the radial and azimuthal distributions of the observed polarization signature. Radial variation is mainly determined by grain size. The polarization fraction is high if the particle size is $\sim \lambda/2\pi$; it is low if the particle size is larger or smaller than this. In contrast, azimuthal variation in polarization is enhanced if the dust scale height is increased. Based on detailed modeling of the HD 163296 polarization, we found the following radial variations in the grain size and dust scale height. The maximum grain size was 140 microns in the gaps and significantly larger or smaller in the rings. The dust scale height is less than one-third the gas scale height inside the 70 au ring, and two-thirds the gas scale height outside the 70 au ring. Furthermore, we constrained the gas turbulence to be $\alpha\lesssim1.5\times10^{-3}$ in the 50 au gap and $\alpha\sim 0.015-0.3$ in the 90 au gap. The transition of the turbulence strength at the boundary of the 70 au ring indicates the existence of a dead zone.

Dust coagulation in a protoplanetary disk is the first step of planetesimal formation. However, a pathway from dust aggregates to planetesimals remains unclear. Both numerical simulations and laboratory experiments have suggested the importance of dust structure in planetesimal formation, but it is not well constrained by observations. We study how dust structure and porosity alters polarimetric images at millimeter wavelength by performing 3D radiative transfer simulations. Aggregates with different porosity and fractal dimension are considered. As a result, we find that dust aggregates with lower porosity and/or higher fractal dimension are favorable to explain observed millimeter-wave scattering polarization of disks. Aggregates with extremely high porosity fail to explain the observations. In addition, we also show that particles with moderate porosity show weak wavelength dependence of scattering polarization, indicating that multi-wavelength polarimetry is useful to constrain dust porosity. Finally, we discuss implications for dust evolution and planetesimal formation in disks.

We present ALMA observations of the $98.5~\mathrm{GHz}$ dust continuum and the $\mathrm{^{13}CO}~J = 1 - 0$ and $\mathrm{C^{18}O}~J = 1 - 0$ line emissions of the protoplanetary disk associated with HD~142527. The $98.5~\mathrm{GHz}$ continuum shows a strong azimuthal-asymmetric distribution similar to that of the previously reported $336~\mathrm{GHz}$ continuum, with a peak emission in dust concentrated region in the north. The disk is optically thin in both the $98.5~\mathrm{GHz}$ dust continuum and the $\mathrm{C^{18}O}~J = 1 - 0$ emissions. We derive the distributions of gas and dust surface densities, $\Sigma_\mathrm{g}$ and $\Sigma_\mathrm{d}$, and the dust spectral opacity index, $\beta$, in the disk from ALMA Band 3 and Band 7 data. In the analyses, we assume the local thermodynamic equilibrium and the disk temperature to be equal to the peak brightness temperature of $\mathrm{^{13}CO}~J = 3 - 2$ with a continuum emission. The gas-to-dust ratio, $\mathrm{G/D}$, varies azimuthally with a relation $\mathrm{G/D} \propto \Sigma_\mathrm{d}^{-0.53}$, and $\beta$ is derived to be $\approx 1$ and $\approx 1.7$ in the northern and southern regions of the disk, respectively. These results are consistent with the accumulation of larger dust grains in a higher pressure region. In addition, our results show that the peak $\Sigma_\mathrm{d}$ is located ahead of the peak $\Sigma_\mathrm{g}$. If the latter corresponds to a vortex of high gas pressure, the results indicate that the dust is trapped ahead of the vortex, as predicted by some theoretical studies.

We present 870 $\mu$m ALMA polarization observation toward the Class I\hspace{-.1em}I protoplanetary disk around AS 209, which has concentric, multiple gaps and rings. We successfully detect the polarized emission and find that the polarization orientations and fractions have distinct characteristics between the inner and outer regions. In the inner region, the polarization orientations are parallel to the minor axis of the disk, which is consistent with the self-scattering model. The mean polarization fraction in the region is $\sim$0.2\%, which is lower than the expected value when the grains have the maximum polarization efficiency, which corresponds to $\lambda$/2$\pi$ $\sim$ 140 $\mu$m in grain radius. In the outer region, we detect $\sim$1.0\% polarization and find that the polarization orientations are almost in the azimuthal directions. Moreover, the polarization orientations have systematic angular deviations from the azimuthal directions with $\Delta$$\theta$ $\sim$ 4\fdg5 $\pm$ 1\fdg6. The pattern is consistent with a model that radially drifting dust grains are aligned by the gas flow against the dust grains. We consider possible scenarios of the grain dynamics at the AS 209 ring which can reproduce the polarization pattern. However, the directions of the observed angular deviations are opposite to what is predicted under the fact that the disk rotates clockwise. This poses a question in our understandings of the alignment processes and/or grain dynamics in protoplanetary disks.

We present polarimetric observations of four Class II protoplanetary disks (DG Tau, Haro 6-13, RY Tau, and MWC 480) taken with the Atacama Large Millimeter/submillimeter Array (ALMA) at 3 mm. The polarization morphologies observed fall into two distinct categories: azimuthal polarization (DG Tau and Haro 6-13) and polarization parallel to the disk minor axis (RY Tau and MWC 480). The mechanisms responsible for disk polarization at millimeter and submillimeter wavelengths are currently under debate. In this Letter, we investigate two mechanisms capable of producing polarized dust emission in disks: self-scattering and grain alignment to the radiation anisotropy. The polarization morphologies of DG Tau and Haro 6-13 are broadly consistent with that expected from radiation alignment (though radiative alignment still does not account for all of the features seen in these disks), while RY Tau and MWC 480 are more consistent with self-scattering. Such a variation in the polarized morphology may provide evidence of dust grain size differences between the sources.

ALMA surveys have suggested that the dust in Class II disks may not be enough to explain the averaged solid mass in exoplanets, under the assumption that the mm disk continuum emission is optically thin. This optically thin assumption seems to be supported by recent DSHARP observations where the measured optical depths of spatially resolved disks are mostly less than one. However, we point out that dust scattering can considerably reduce the emission from an optically thick region. If that scattering is ignored, the optical depth will be considerably underestimated. An optically thick disk with scattering can be misidentified as an optically thin disk. Dust scattering in more inclined disks can reduce the intensity even further, making the disk look even fainter. The measured optical depth of $\sim$0.6 in several DSHARP disks can be naturally explained by optically thick dust with an albedo of $\sim$0.9 at 1.25 mm. Using the DSHARP opacity, this albedo corresponds to a dust population with the maximum grain size ($s_{max}$) of 0.1-1 mm. For optically thick scattering disks, the measured spectral index $\alpha$ can be either larger or smaller than 2 depending on if the dust albedo increases or decreases with wavelength. Using the DSHARP opacity, $\alpha<2$ corresponds to $s_{max}$ of 0.03-0.3 mm. We describe how this optically thick scattering scenario could explain the observed scaling between submm continuum sizes and luminosities, and might help ease the tension between the dust size constraints from polarization and dust continuum measurements. We suggest that a significant amount of disk mass can be hidden from ALMA observations at short millimeter wavelengths. For compact disks smaller than 30 au, we can easily underestimate the dust mass by more than a factor of 10. Longer wavelength observations (e.g. VLA or SKA) are desired to probe the dust mass in disks.

We present the POL-2 850 $\mu$m linear polarization map of the Barnard 1 clump in the Perseus molecular cloud complex from the B-fields In STar-forming Region Observations (BISTRO) survey at the James Clerk Maxwell Telescope. We find a trend of decreasing polarization fraction as a function of total intensity, which we link to depolarization effects towards higher density regions of the cloud. We then use the polarization data at 850 $\mu$m to infer the plane-of-sky orientation of the large-scale magnetic field in Barnard 1. This magnetic field runs North-South across most of the cloud, with the exception of B1-c where it turns more East-West. From the dispersion of polarization angles, we calculate a turbulence correlation length of $5.0 \pm 2.5$ arcsec ($1500$ au), and a turbulent-to-total magnetic energy ratio of $0.5 \pm 0.3$ inside the cloud. We combine this turbulent-to-total magnetic energy ratio with observations of NH$_3$ molecular lines from the Green Bank Ammonia Survey (GAS) to estimate the strength of the plane-of-sky component of the magnetic field through the Davis-Chandrasekhar-Fermi method. With a plane-of-sky amplitude of $120 \pm 60$ $\mu$G and a criticality criterion $\lambda_c = 3.0 \pm 1.5$, we find that Barnard 1 is a supercritical molecular cloud with a magnetic field nearly dominated by its turbulent component.

We present the 850 $\mu$m polarization observations toward the IC5146 filamentary cloud taken using the Submillimetre Common-User Bolometer Array 2 (SCUBA-2) and its associated polarimeter (POL-2), mounted on the James Clerk Maxwell Telescope (JCMT), as part of the B-fields In STar forming Regions Observations (BISTRO). This work is aimed at revealing the magnetic field morphology within a core-scale ($\lesssim 1.0$ pc) hub-filament structure (HFS) located at the end of a parsec-scale filament. To investigate whether or not the observed polarization traces the magnetic field in the HFS, we analyze the dependence between the observed polarization fraction and total intensity using a Bayesian approach with the polarization fraction described by the Rice likelihood function, which can correctly describe the probability density function (PDF) of the observed polarization fraction for low signal-to-noise ratio (SNR) data. We find a power-law dependence between the polarization fraction and total intensity with an index of 0.56 in $A_V\sim$ 20--300 mag regions, suggesting that the dust grains in these dense regions can still be aligned with magnetic fields in the IC5146 regions. Our polarization maps reveal a curved magnetic field, possibly dragged by the contraction along the parsec-scale filament. We further obtain a magnetic field strength of 0.5$\pm$0.2 mG toward the central hub using the Davis-Chandrasekhar-Fermi method, corresponding to a mass-to-flux criticality of $\sim$ $1.3\pm0.4$ and an Alfv\'{e}nic Mach number of $<$0.6. These results suggest that gravity and magnetic field is currently of comparable importance in the HFS, and turbulence is less important.

Polarized dust emission outside of disks reveal the magnetic field morphology of molecular clouds. Within disks, however, polarized dust emission can arise from very different mechanisms (e.g., self-scattering), and each of them are useful for constraining physical properties in the disk. For example, these mechanisms allow us to constrain the disk grain size distributions and grain/disk geometries, independent from current methods of measuring these parameters. To accurately model these features and disentangle the various polarization mechanisms, multiwavelength observations at very high resolution and sensitivity are required. With significant upgrades to current interferometric facilities, we can understand how grains evolve in disks during the planet formation process.

Dust grains emit intrinsic polarized emission if they are elongated and aligned in the same direction. The direction of the grain alignment is determined by external forces, such as magnetic fields, radiation, and gas flow against the dust grains. In this letter, we apply the concept of the grain alignment by gas flow, which is called mechanical alignment, to the situation of a protoplanetary disk. We assume that grains have a certain helicity, which results in the alignment with the minor axis parallel to the grain velocity against the ambient disk gas and discuss the morphology of polarization vectors in a protoplanetary disk. We find that the direction of the polarization vectors depends on the Stokes number, which denotes how well grains are coupled to the gas. If the Stokes number is less than unity, orientation of polarization is in the azimuthal direction since the dust velocity against the gas is in the radial direction. If the Stokes number is as large as unity, the polarization vectors show a leading spiral pattern since the radial and azimuthal components of the gas velocity against the dust grains are comparable. This suggests that if the observed polarization vectors show a leading spiral pattern, it would indicate that Stokes number of dust grains is around unity, which is presumably radially drifting.

We study scattered light properties of protoplanetary discs at near-infrared wavelengths for various dust size and structure by performing radiative transfer simulations. We show that different dust structures might be probed by measuring disk polarisation fraction as long as the dust radius is larger than the wavelength. When the radius is larger than the wavelength, disc scattered light will be highly polarised for highly porous dust aggregates, whereas more compact dust structure tends to show low polarisation fraction. Next, roles of monomer radius and fractal dimension for scattered light colours are studied. We find that, outside the Rayleigh regime, as fractal dimension or monomer radius increases, colours of the effective albedo at near-infrared wavelengths vary from blue to red. Our results imply that discs showing grey or slightly blue colours and high polarisation fraction in near-infrared wavelengths might be explained by the presence of large porous aggregates containing sub-microns sized monomers.

Comets are thought to have information about the formation process of our solar system. Recently, detailed information about comet 67P/Churyumov-Gerasimenko has been found by a spacecraft mission Rosetta. It is remarkable that its tensile strength was estimated. In this paper, we measure and formulate the tensile strength of porous dust aggregates using numerical simulations, motivated by porous dust aggregation model of planetesimal formation. We perform three-dimensional numerical simulations using a monomer interaction model with periodic boundary condition. We stretch out a dust aggregate with a various initial volume filling factor between $10^{-2}$ and 0.5. We find that the tensile stress takes the maximum value at the time when the volume filling factor decreases to about a half of the initial value. The maximum stress is defined to be the tensile strength. We take an average of the results with 10 different initial shapes to smooth out the effects of initial shapes of aggregates. Finally, we numerically obtain the relation between the tensile strength and the initial volume filling factor of dust aggregates. We also use a simple semi-analytical model and successfully reproduce the numerical results, which enables us to apply to a wide parameter range and different materials. The obtained relation is consistent with previous experiments and numerical simulations about silicate dust aggregates. We estimate that the monomer radius of comet 67P has to be about 3.3--220 $\mathrm{\mu m}$ to reproduce its tensile strength using our model.

We report 850~$\mu$m dust polarization observations of a low-mass ($\sim$12 $M_{\odot}$) starless core in the $\rho$ Ophiuchus cloud, Ophiuchus C, made with the POL-2 instrument on the James Clerk Maxwell Telescope (JCMT) as part of the JCMT B-fields In STar-forming Region Observations (BISTRO) survey. We detect an ordered magnetic field projected on the plane of sky in the starless core. The magnetic field across the $\sim$0.1~pc core shows a predominant northeast-southwest orientation centering between $\sim$40$^\circ$ to $\sim$100$^\circ$, indicating that the field in the core is well aligned with the magnetic field in lower-density regions of the cloud probed by near-infrared observations and also the cloud-scale magnetic field traced by Planck observations. The polarization percentage ($P$) decreases with an increasing total intensity ($I$) with a power-law index of $-$1.03 $\pm$ 0.05. We estimate the plane-of-sky field strength ($B_{\mathrm{pos}}$) using modified Davis-Chandrasekhar-Fermi (DCF) methods based on structure function (SF), auto-correlation (ACF), and unsharp masking (UM) analyses. We find that the estimates from the SF, ACF, and UM methods yield strengths of 103 $\pm$ 46 $\mu$G, 136 $\pm$ 69 $\mu$G, and 213 $\pm$ 115 $\mu$G, respectively. Our calculations suggest that the Ophiuchus C core is near magnetically critical or slightly magnetically supercritical (i.e. unstable to collapse). The total magnetic energy calculated from the SF method is comparable to the turbulent energy in Ophiuchus C, while the ACF method and the UM method only set upper limits for the total magnetic energy because of large uncertainties.

Disk polarization in (sub)millimeter dust continuum is a rapidly growing field in the ALMA era. It opens up the exciting possibility of detecting and characterizing magnetic fields and grain growth in disks around young stellar objects. However, to use polarization for probing the disk properties, its production mechanism must be ascertained first. To date, the conventional mechanism involving magnetically aligned grains fails to explain the polarization patterns detected in most disks. This is especially true for the inclined disk of HL Tau in ALMA Band 3 (wavelength $\sim 3$ mm), which has an elliptical polarization pattern. The elliptical pattern was taken as evidence for polarized emission by dust grains aligned with their long axes perpendicular the direction of the radiative flux. We show that the radiatively aligned grains produce a circular, rather than elliptical, polarization pattern even in inclined disks such as HL Tau. An elliptical polarization pattern can be produced if the grains are aligned aerodynamically by the difference in rotation speed between the dust and gas through the Gold mechanism. However, a strong azimuthal variation in polarized intensity is expected for both the radiative and aerodynamic alignment, but not observed in the HL Tau disk in ALMA Band 3. We conclude that neither of these two mechanisms alone can explain the data and the origin of the 3 mm polarization remains a mystery. We speculate that this mystery may be resolved by a combination of both direct emission and scattering by aerodynamically aligned grains.

The origin of polarized emission from protoplanetary disks is uncertain. Three mechanisms have been proposed for such polarized emission: grain alignment with magnetic fields, grain alignment with radiation gradients, and self-scattering of thermal dust emission. Aiming to observationally identify the polarization mechanisms, we present ALMA polarization observations of the 0.87 mm dust continuum emission toward the circumstellar disk around HD 142527 with high spatial resolution. We confirm that the polarization vectors in the northern region are consistent with self-scattering. Furthermore, we show that the polarization vectors in the southern region are consistent with grain alignment by magnetic fields, although self-scattering cannot be ruled out. To understand the differences between the polarization mechanisms, we propose a simple grain size segregation model: small dust grains ($\lesssim$ 100 microns) are dominant and aligned with magnetic fields in the southern region, and middle-sized ($\sim100$ microns) grains in the upper layer emit self-scattered polarized emission in the northern region. The grain size near the middle plane in the northern region cannot be measured because the emission at 0.87 mm is optically thick. However, it can be speculated that larger dust grains ($\gtrsim$ cm) may accumulate near this plane. These results are consistent with those of a previous analysis of the disk, in which large grain accumulation and optically thick emission from the northern region were found. This model is also consistent with theories where smaller dust grains are aligned with magnetic fields. The magnetic fields are toroidal, at least in the southern region.

We present the results of dust emission polarization measurements of Ophiuchus-B (Oph-B) carried out using the Submillimetre Common-User Bolometer Array 2 (SCUBA-2) camera with its associated polarimeter (POL-2) on the James Clerk Maxwell Telescope (JCMT) in Hawaii. This work is part of the B-fields In Star-forming Region Observations (BISTRO) survey initiated to understand the role of magnetic fields in star formation for nearby star-forming molecular clouds. We present a first look at the geometry and strength of magnetic fields in Oph-B. The field geometry is traced over $\sim$0.2 pc, with clear detection of both of the sub-clumps of Oph-B. The field pattern appears significantly disordered in sub-clump Oph-B1. The field geometry in Oph-B2 is more ordered, with a tendency to be along the major axis of the clump, parallel to the filamentary structure within which it lies. The degree of polarization decreases systematically towards the dense core material in the two sub-clumps. The field lines in the lower density material along the periphery are smoothly joined to the large scale magnetic fields probed by NIR polarization observations. We estimated a magnetic field strength of 630$\pm$410 $\mu$G in the Oph-B2 sub-clump using a Davis-Chandeasekhar-Fermi analysis. With this magnetic field strength, we find a mass-to-flux ratio $\lambda$= 1.6$\pm$1.1, which suggests that the Oph-B2 clump is slightly magnetically supercritical.

We present 850 $\mu$m imaging polarimetry data of the $\rho$ Oph-A core taken with the Submillimeter Common-User Bolometer Array-2 (SCUBA-2) and its polarimeter (POL-2), as part of our ongoing survey project, BISTRO (B-fields In STar forming RegiOns). The polarization vectors are used to identify the orientation of the magnetic field projected on the plane of the sky at a resolution of 0.01 pc. We identify 10 subregions with distinct polarization fractions and angles in the 0.2 pc $\rho$ Oph A core; some of them can be part of a coherent magnetic field structure in the $\rho$ Oph region. The results are consistent with previous observations of the brightest regions of $\rho$ Oph-A, where the degrees of polarization are at a level of a few percents, but our data reveal for the first time the magnetic field structures in the fainter regions surrounding the core where the degree of polarization is much higher ($> 5 \%$). A comparison with previous near-infrared polarimetric data shows that there are several magnetic field components which are consistent at near-infrared and submillimeter wavelengths. Using the Davis-Chandrasekhar-Fermi method, we also derive magnetic field strengths in several sub-core regions, which range from approximately 0.2 to 5 mG. We also find a correlation between the magnetic field orientations projected on the sky with the core centroid velocity components.

We present 870 $\mu$m ALMA observations of polarized dust emission toward the Class II protoplanetary disk IM Lup. We find that the orientation of the polarized emission is along the minor axis of the disk, and that the value of the polarization fraction increases steadily toward the center of the disk, reaching a peak value of ~1.1%. All of these characteristics are consistent with models of self-scattering of submillimeter-wave emission from an optically thin inclined disk. The distribution of the polarization position angles across the disk reveals that while the average orientation is along the minor axis, the polarization orientations show a significant spread in angles; this can also be explained by models of pure scattering. We compare the polarization with that of the Class I/II source HL Tau. A comparison of cuts of the polarization fraction across the major and minor axes of both sources reveals that IM Lup has a substantially higher polarization fraction than HL Tau toward the center of the disk. This enhanced polarization fraction could be due a number of factors, including higher optical depth in HL Tau, or scattering by larger dust grains in the more evolved IM Lup disk. However, models yield similar maximum grain sizes for both HL Tau (72 $\mu$m) and IM Lup (61 $\mu$m, this work). This reveals continued tension between grain-size estimates from scattering models and from models of the dust emission spectrum, which find that the bulk of the (unpolarized) emission in disks is most likely due to millimeter (or even centimeter) sized grains.

The mechanism for producing polarized emission from protostellar disks at (sub)millimeter wavelengths is currently uncertain. Classically, polarization is expected from non-spherical grains aligned with the magnetic field. Recently, two alternatives have been suggested. One polarization mechanism is caused by self-scattering from dust grains of sizes comparable to the wavelength while the other mechanism is due to grains aligned with their short axes along the direction of radiation anisotropy. The latter has recently been shown as a likely mechanism for causing the dust polarization detected in HL Tau at 3.1 mm. In this paper, we present ALMA polarization observations of HL Tau for two more wavelengths: 870 $\mu$m and 1.3 mm. The morphology at 870 $\mu$m matches the expectation for self-scattering, while that at 1.3 mm shows a mix between self-scattering and grains aligned with the radiation anisotropy. The observations cast doubt on the ability of (sub)millimeter continuum polarization to probe disk magnetic fields for at least HL Tau. By showing two distinct polarization morphologies at 870 $\mu$m and 3.1 mm and a transition between the two at 1.3 mm, this paper provides definitive evidence that the dominant (sub)millimeter polarization mechanism transitions with wavelength. In addition, if the polarization at 870 $\mu$m is due to scattering, the lack of polarization asymmetry along the minor axis of the inclined disk implies that the large grains responsible for the scattering have already settled into a geometrically thin layer, and the presence of asymmetry along the major axis indicates that the HL Tau disk is not completely axisymmetric.

$\mathit{Context.}$ The thermal conductivity of highly porous dust aggregates is a key parameter for many subjects in planetary science; however, it is not yet fully understood. $\mathit{Aims.}$ In this study, we investigate the thermal conductivity of fluffy dust aggregates with filling factors of less than $10^{-1}$. $\mathit{Methods.}$ We determine the temperature structure and heat flux of the porous dust aggregates calculated by $N$-body simulations of static compression in the periodic boundary condition. $\mathit{Results.}$ We derive an empirical formula for the thermal conductivity through the solid network $k_{\rm sol}$ as a function of the filling factor of dust aggregates $\phi$. The results reveal that $k_{\rm sol}$ is approximately proportional to ${\phi}^{2}$, and the thermal conductivity through the solid network is significantly lower than previously assumed. In light of these findings, we must reconsider the thermal histories of small planetary bodies.

The mechanisms causing millimeter-wave polarization in protoplanetary disks are under debate. To disentangle the polarization mechanisms, we observe the protoplanetary disk around HL Tau at 3.1 mm with the Atacama Large Millimeter/submillimeter Array (ALMA), which had polarization detected with CARMA at 1.3 mm. We successfully detect the ring-like azimuthal polarized emission at 3.1 mm. This indicates that dust grains are aligned with the major axis being in the azimuthal direction, which is consistent with the theory of radiative alignment of elongated dust grains, where the major axis of dust grains is perpendicular to the radiation flux. Furthermore, the morphology of the polarization vectors at 3.1 mm is completely different from those at 1.3 mm. We interpret that the polarization at 3.1 mm to be dominated by the grain alignment with the radiative flux producing azimuthal polarization vectors, while the self-scattering dominates at 1.3 mm and produces the polarization vectors parallel to the minor axis of the disk. By modeling the total polarization fraction with a single grain population model, the maximum grain size is constrained to be $100{\rm~\mu m}$, which is smaller than the previous predictions based on the spectral index between ALMA at 3 mm and VLA at 7 mm.

We investigate the dust structure of gravitationally unstable disks undergoing mass accretion from the envelope envisioning the application to Class 0/I young stellar objects (YSOs) We find that the dust disk quickly settles into a steady state and that, compared to a disk with interstellar medium (ISM) dust-to-gas mass ratio and micron-sized dust, the dust mass in the steady-state decreases by a factor of 1/2 to 1/3, and the dust thermal emission decreases by a factor of 1/3 to 1/5. The latter decrease is caused by dust depletion and opacity decrease owing to dust growth. Our results suggest that the masses of gravitationally unstable disks in the Class 0/I YSOs are underestimated by a factor of 1/3 to 1/5 when calculated from the dust thermal emission assuming an ISM dust-to-gas mass ratio and micron-sized dust opacity, and that a larger fraction of disks in Class 0/I YSOs is gravitationally unstable than was previously believed. We also investigate the orbital radius $r_{\rm P}$ within which planetesimals form via coagulation of porous dust aggregates and show that $r_{\rm P}$ becomes $\sim 20$ AU for a gravitationally unstable disk around a solar mass star. Because $r_{\rm P}$ increases as the gas surface density increases and a gravitationally unstable disk has a maximum gas surface density, $r_{\rm P}\sim 20$ AU is the theoretical maximum radius. We suggest that planetesimals formation in the Class 0/I phase is preferable to that in the Class II phase because large gas surface density is expected and large amount of dust is supplied by envelope-to-disk accretion.

We present the polarization observations toward the circumstellar disk around HD 142527 by using Atacama Large Millimeter/submillimeter Array (ALMA) at the frequency of 343 GHz. The beam size is $0.51 " \times 0.44 "$, which corresponds to the spatial resolution of $\sim$ 71 $\times$ 62 AU. The polarized intensity displays a ring-like structure with a peak located on the east side with a polarization fraction of $P= 3.26 \pm 0.02$ %, which is different from the peak of the continuum emission from the northeast region. The polarized intensity is significantly weaker at the peak of the continuum where $P= 0.220 \pm 0.010$ %. The polarization vectors are in the radial direction in the main ring of the polarized intensity, while there are two regions outside at the northwest and northeast areas where the vectors are in the azimuthal direction. If the polarization vectors represent the magnetic field morphology, the polarization vectors indicate the toroidal magnetic field configuration on the main ring and the poloidal fields outside. On the other hand, the flip of the polarization vectors is predicted by the self-scattering of thermal dust emission due to the change of the direction of thermal radiation flux. Therefore, we conclude that self-scattering of thermal dust emission plays a major role in producing polarization at millimeter wavelengths in this protoplanetary disk. Also, this puts a constraint on the maximum grain size to be approximately 150 ${\rm \mu m}$ if we assume compact spherical dust grains.

Spatially resolved polarized (sub-)mm emission has been observed for example in the protoplanetary disk around HL Tau. Magnetically aligned grains are commonly interpreted as the source of polarization. However, self-scattering by large dust grains with a high enough albedo is another polarization mechanism, becoming a compelling method independent of the spectral index to constrain the dust grain size in protoplanetary disks. We study the dust polarization at mm wavelength in the dust trapping scenario proposed for transition disks, when a giant planet opens a gap in the disk. We investigate the characteristic polarization patterns and their dependence on disk inclination, dust size evolution, planet position, and observing wavelength. We combine two-dimensional hydrodynamical simulations of planet-disk interactions with self-consistent dust growth models. These size-dependent dust density distributions are used for follow-up three-dimensional radiative transfer calculations to predict the polarization degree at ALMA bands due to scattered thermal emission. We find that the polarization pattern of a disk with a planetary gap after 1 Myr of dust evolution shows a distinctive three ring structure. Two narrow inner rings are located at the planet gap edges. For increasing observing wavelengths all three rings slightly change their position, where the innermost and outermost rings move inward. This distance is detectable comparing the results at ALMA bands 3, 6 and 7. Within the highest polarized intensity regions the polarization vectors are oriented in the azimuthal direction. For an inclined disk there is an interplay between polarization originating from a flux gradient and inclination-induced quadrupole polarization. For intermediate inclined transition disks the polarization degree is as high as ~ 2% at band 3, which is well above the detection limit of future ALMA observations.

In protoplanetary disks, micron-sized dust grains coagulate to form highly porous dust aggregates. Because the optical properties of these aggregates are not completely understood, it is important to investigate how porous dust aggregates scatter light. In this study, the light scattering properties of porous dust aggregates were calculated using a rigorous method, the T-matrix method, and the results were then compared with those obtained using the Rayleigh-Gans-Debye (RGD) theory and Mie theory with the effective medium approximation (EMT). The RGD theory is applicable to moderately large aggregates made of nearly transparent monomers. This study considered two types of porous dust aggregates, ballistic cluster-cluster agglomerates (BCCAs) and ballistic particle-cluster agglomerates (BPCAs). First, the angular dependence of the scattered intensity was shown to reflect the hierarchical structure of dust aggregates; the large-scale structure of the aggregates is responsible for the intensity at small scattering angles, and their small-scale structure determines the intensity at large scattering angles. Second, it was determined that the EMT underestimates the backward scattering intensity by multiple orders of magnitude, especially in BCCAs, because the EMT averages the structure within the size of the aggregates. It was concluded that the RGD theory is a very useful method for calculating the optical properties of BCCAs.

The millimeter-wave polarization of the protoplanetary disk around HL Tau has been interpreted as the emission from elongated dust grains aligned with the magnetic field in the disk. However, the self-scattering of thermal dust emission may also explain the observed millimeter-wave polarization. In this paper, we report a modeling of the millimeter-wave polarization of the HL Tau disk with the self-polarization. Dust grains are assumed to be spherical and to have a power-law size distribution. We change the maximum grain size with a fixed dust composition in a fixed disk model to find the grain size to reproduce the observed signature. We find that the direction of the polarization vectors and the polarization degree can be explained with the self-scattering. Moreover, the polarization degree can be explained only if the maximum grain size is $\sim 150 {\rm~\mu m}$. The obtained grain size from the polarization is different from a size of millimeter or larger that has been previously expected from the spectral index of the dust opacity coefficient if the emission is optically thin. We discuss that porous dust aggregates may solve the inconsistency of the maximum grain size between the two constraints.

We investigate the dust and gas distribution in the disk around HD 142527 based on ALMA observations of dust continuum, 13CO(3-2), and C18O(3-2) emission. The disk shows strong azimuthal asymmetry in the dust continuum emission, while gas emission is more symmetric. In this paper, we investigate how gas and dust are distributed in the dust-bright northern part of the disk and in the dust-faint southern part. We construct two axisymmetric disk models. One reproduces the radial profiles of the continuum and the velocity moments 0 and 1 of CO lines in the north and the other reproduces those in the south. We have found that the dust is concentrated in a narrow ring having ~50AU width (in FWHM; w_d=30AU in our parameter definition) located at ~170-200AU from the central star. The dust particles are strongly concentrated in the north. We have found that the dust surface density contrast between the north and south amounts to ~70. Compared to the dust, the gas distribution is more extended in the radial direction. We find that the gas component extends at least from ~100AU to ~250AU from the central star, and there should also be tenuous gas remaining inside and outside of these radii. The azimuthal asymmetry of gas distribution is much smaller than dust. The gas surface density differs only by a factor of ~3-10 between the north and south. Hence, gas-to-dust ratio strongly depends on the location of the disk: ~30 at the location of the peak of dust distribution in the south and ~3 at the location of the peak of dust distribution in the north. Despite large uncertainties, the overall gas-to-dust ratio is inferred to be ~10-30, indicating that the gas depletion may have already been under way.

We present a new method to constrain the grain size in protoplanetary disks with polarization observations at millimeter wavelengths. If dust grains are grown to the size comparable to the wavelengths, the dust grains are expected to have a large scattering opacity and thus the continuum emission is expected to be polarized due to self-scattering. We perform 3D radiative transfer calculations to estimate the polarization degree for the protoplanetary disks having radial Gaussian-like dust surface density distributions, which have been recently discovered. The maximum grain size is set to be $100 {\rm~\mu m}$ and the observing wavelength to be 870 ${\rm \mu m}$. We find that the polarization degree is as high as 2.5 % with a subarcsec spatial resolution, which is likely to be detected with near-future ALMA observations. The emission is polarized due to scattering of anisotropic continuum emission. The map of the polarization degree shows a double peaked distribution and the polarization vectors are in the radial direction in the inner ring and in the azimuthal direction in the outer ring. We also find the wavelength dependence of the polarization degree: the polarization degree is the highest if dust grains have a maximum size of $a_{\rm max}\sim\lambda/2\pi$, where $\lambda$ is the observing wavelength. Hence, multi-wave and spatially resolved polarization observations toward protoplanetary disks enable us to put a constraint on the grain size. The constraint on the grain size from polarization observations is independent of or may be even stronger than that from the opacity index.

We present a new Subaru/HiCIAO high-contrast H-band polarized intensity (PI) image of a nearby transitional disk associated with TW Hydrae. The scattered light from the disk was detected from 0.2" to 1.5" (11 - 81 AU) and the PI image shows a clear axisymmetric depression in polarized intensity at ~ 0.4" (~ 20 AU) from the central star, similar to the ~ 80 AU gap previously reported from HST images. Azimuthal polarized intensity profile also shows the disk beyond 0.2" is almost axisymmetric. We discuss two possible scenarios explaining the origin of the polarized intensity depression: 1) a gap structure may exist at ~ 20 AU from the central star because of shallow slope seen in the polarized intensity profile, and 2) grain growth may be occurring in the inner region of the disk. Multi-band observations at NIR and millimeter/sub-millimeter wavelengths play a complementary role in investigating dust opacity and may help reveal the origin of the gap more precisely.

Context. Dust grains coagulate to form dust aggregates in protoplanetary disks. Their porosity can be extremely high in the disks. Although disk emission may come from fluffy dust aggregates, the emission has been modeled with compact grains. Aims. We aim to reveal the mass opacity of fluffy aggregates from infrared to millimeter wavelengths with the filling factor ranging from 1 down to $10^{-4}$. Methods. We use Mie calculations with an effective medium theory. The monomers are assumed to be 0.1 ${\rm \mu m}$ sized grains, which is much shorter than the wavelengths that we focus on. Results. We find that the absorption mass opacity of fluffy aggregates are characterized by the product $a\times f$, where $a$ is the dust radius and $f$ is the filling factor, except for the interference structure. The scattering mass opacity is also characterized by $af$ at short wavelengths while it is higher in more fluffy aggregates at long wavelengths. We also derive the analytic formula of the mass opacity and find that it reproduces the Mie calculations. We also calculate the expected difference of the emission between compact and fluffy aggregates in protoplanetary disks with a simple dust growth and drift model. We find that compact grains and fluffy aggregates can be distinguished by the radial distribution of the opacity index $\beta$. The previous observation of the radial distribution of $\beta$ is consistent with the fluffy case, but more observations are required to distinguish between fluffy or compact. In addition, we find that the scattered light would be another way to distinguish between compact grains and fluffy aggregates.

We report ALMA observations of dust continuum, 13CO J=3--2, and C18O J=3--2 line emission toward a gapped protoplanetary disk around HD 142527. The outer horseshoe-shaped disk shows the strong azimuthal asymmetry in dust continuum with the contrast of about 30 at 336 GHz between the northern peak and the southwestern minimum. In addition, the maximum brightness temperature of 24 K at its northern area is exceptionally high at 160 AU from a star. To evaluate the surface density in this region, the grain temperature needs to be constrained and was estimated from the optically thick 13CO J=3--2 emission. The lower limit of the peak surface density was then calculated to be 28 g cm-2 by assuming a canonical gas-to-dust mass ratio of 100. This finding implies that the region is locally too massive to withstand self-gravity since Toomre's Q <~1--2, and thus, it may collapse into a gaseous protoplanet. Another possibility is that the gas mass is low enough to be gravitationally stable and only dust grains are accumulated. In this case, lower gas-to-dust ratio by at least 1 order of magnitude is required, implying possible formation of a rocky planetary core.

Context: In planetesimal formation theory, several barriers have been proposed, which are bouncing, fragmentation, and radial drift problems. To understand the structure evolution of dust aggregates is a key in the planetesimal formation. Dust grains become fluffy by coagulation in protoplanetary disks. However, once they become fluffy, they are not sufficiently compressed by collisional compression to form compact planetesimals. Aims: We aim to reveal the pathway of the dust structure evolution from dust grains to compact planetesimals. Methods: Using the compressive strength formula, we analytically investigate how fluffy dust aggregates are compressed by static compression due to ram pressure of the disk gas and self gravity of the aggregates in protoplanetary disks. Results: We reveal the pathway of the porosity evolution from dust grains via fluffy aggregates to form planetesimals, circumventing the barriers in planetesimal formation. The aggregates are compressed by the disk gas to the density of 10^{-3} g/cm^3 in coagulation, which is more compact than the case with collisional compression. Then, they are compressed more by self gravity to 10^{-1} g/cm^3 when the radius is 10 km. Although the gas compression decelerate the growth, they grow enough rapidly to avoid the radial drift barrier when the orbital radius is < 6 AU in a typical disk. Conclusions: We propose fluffy dust growth scenario from grains to planetesimals. It enables the icy planetesimal formation in a wide range beyond the snowline in protoplanetary disks. This result proposes a concrete initial condition of planetesimals for the later stages of the planet formation.

Context: In protoplanetary disks, dust grains coagulate with each other and grow to form aggregates. As these aggregates grow by coagulation, their filling factor \phi decreases down to \phi << 1. However, comets, the remnants of these early planetesimals, have \phi ~ 0.1. Thus, static compression of porous dust aggregates is important in planetesimal formation. However, the static compression strength has been investigated only for relatively high density aggregates (\phi > 0.1). Aims: We investigate and find the compression strength of highly porous aggregates (\phi << 1). Methods: We perform three dimensional N-body simulations of aggregate compression with a particle-particle interaction model. We introduce a new method of static compression: the periodic boundary condition is adopted and the boundaries move with low speed to get closer. The dust aggregate is compressed uniformly and isotropically by themselves over the periodic boundaries. Results: We empirically derive a formula of the compression strength of highly porous aggregates (\phi << 1). We check the validity of the compression strength formula for wide ranges of numerical parameters, such as the size of initial aggregates, the boundary speed, the normal damping force, and material. We also compare our results to the previous studies of static compression in the relatively high density region (\phi > 0.1) and confirm that our results consistently connect to those in the high density region. The compression strength formula is also derived analytically.

The configuration and evolution of the magnetic field in star-forming cores are investigated in order to directly compare simulations and observations. We prepare four different initial clouds having different magnetic field strengths and rotation rates, in which magnetic field lines are aligned/misaligned with the rotation axis. First, we calculate the evolution of such clouds from the prestellar stage until long after protostar formation. Then, we calculate the polarization of thermal dust emission expected from the simulation data. We create polarization maps with arbitrary viewing angles and compare them with observations. Using this procedure, we confirmed that the polarization distribution projected on the celestial plane strongly depends on the viewing angle of the cloud. Thus, by comparing the observations with the polarization map predicted by the simulations, we can roughly determine the angle between the direction of the global magnetic field and the line of sight. The configuration of the polarization vectors also depends on the viewing angle. We find that an hourglass configuration of magnetic field lines is not always realized in a collapsing cloud when the global magnetic field is misaligned with the cloud rotation axis. Depending on the viewing angle, an S-shaped configuration of the magnetic field (or the polarization vectors) appears early in the protostellar accretion phase. This indicates that not only the magnetic field but also the cloud rotation affects the dynamical evolution of such a cloud. In addition, by comparing the simulated polarization with actual observations, we can estimate properties of the host cloud such as the evolutionary stage, magnetic field strength, and rotation rate.

We measured polarized dust emission at 350um towards the high-mass star forming massive dense clump IRAS 20126+4104 using the SHARC II Polarimeter, SHARP, at the Caltech Submillimeter Observatory. Most of the observed magnetic field vectors agree well with magnetic field vectors obtained from a numerical simulation for the case when the global magnetic field lines are inclined with respect to the rotation axis of the dense clump. The results of the numerical simulation show that rotation plays an important role on the evolution of the massive dense clump and its magnetic field. The direction of the cold CO 1-0 bipolar outflow is parallel to the observed magnetic field within the dense clump as well as the global magnetic field, as inferred from optical polarimetry data, indicating that the magnetic field also plays a critical role in an early stage of massive star formation. The large-scale Keplerian disk of the massive (proto)star rotates in almost opposite sense to the clump's envelope. The observed magnetic field morphology and the counter-rotating feature of the massive dense clump system provide hints to constrain the role of magnetic fields in the process of high mass star formation.