The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

High resolution far-infrared observations of a large area of the star forming complex RCW 106 obtained using the TIFR 1-metre balloon-borne telescope are presented. Intensity maps have been obtained simultaneously in two bands centred around 150 & 210 micron. Intensity maps have also been obtained at the 4 IRAS bands using HIRES processed IRAS data. From the 150 & 210 micron maps, reliable maps of dust temperature and optical depth have been generated. The star formation in this complex has occured in five linear subclumps. Using the map at 210 micron, which has a spatial resolution superior to that of the IRAS at 100 micron, 23 sources have been identified. The SED and luminosity of these sources have been determined using the associations wit hthe IRAS maps. Luminosity distribution of these sources has been obtained. Assuming these embedded sources to be ZAMS stars and using the mass-luminosity relation, the power law slope of the Initial Mass Function is found to be -1.73+-0.5. This index for this very young complex is about the same as that for more evolved complexes and clusters. Radiation transfer calculations in spherical geometry have been undertaken to fit the SEDs of 13 sources with fluxes in both the TIFR and IRAS bands. From this, the r^-2 density distribution in the envelopes is ruled out. Finally, a correlation is seen between the luminosity of embedded sources and the computed dust masses of the envelopes.

Mid and far infrared maps of many Galactic star forming regions show multiple peaks in close proximity, implying more than one embedded energy sources. With the aim of understanding such interstellar clouds better, the present study models the case of two embedded sources. A radiative transfer scheme has been developed to deal with an uniform density dust cloud in a cylindrical geometry, which includes isotropic scattering in addition to the emission and absorption processes. This scheme has been applied to the Galactic star forming region associated with IRAS 19181+1349, which shows observational evidence for two embedded energy sources. Two independent modelling approaches have been adopted, viz., to fit the observed spectral energy distribution (SED) best; or to fit the various radial profiles best, as a function of wavelength. Both the models imply remarkably similar physical parameters.

Two Galactic star forming regions, one in a very early phase of evolution and another evolved one, associated with the IRAS sources 00338+6312 and 03595+5110 (RAFGL 5111) respectively have been studied in detail. These sources have been mapped simultaneously in two far infrared bands at 143 & 185 \micron), with about 1.5 arcmin angular resolution, using the TIFR 100 cm balloon borne telescope. The HIRES processed IRAS maps at 12, 25, 60 & 100 \micron, have been used for comparison. Whereas IRAS 00338+6312 is resolved only in the TIFR bands, RAFGL 5111 is very well resolved in both the TIFR bands, as well as in at least 3 IRAS bands. The neighbouring fainter source IRAS 04004+5114 has also been resolved in the TIFR bands. Taking advantage of the identical beams in the two TIFR bands at 143 & 185 \micron, dust colour temperature, $T(143/185)$, and optical depth, $\tau_{150}$, maps have been generated for RAFGL 5111. These maps show interesting structural details. Radiative transfer modelling in spherical geometry has been carried out for individual sources. The best fit models are in good agreement with the observed spectral energy distribution (SED), radio continuum data etc. Another scheme of radiative transfer through the interstellar dust-gas cloud including the heavier elements has been used to predict ionic nebular line emission, which are in reasonable agreement with the measurements for RAFGL 5111. An important conclusion from the present study is that, for all the three sources (IRAS 00338+6312; 03595+5110; and 04004+5114, a faint source in the neighbourhood of RAFGL 5111), the best fit to the observed SED is obtained for a uniform density ($n(r) \sim r^0$) cloud.