Normalized to: Kalkuhl, C.
[1]
oai:arXiv.org:1907.09220 [pdf] - 1920228
Trigger performance verification of the FlashCam prototype camera
Sailer, S.;
Werner, F.;
Hermann, G.;
Barcelo, M.;
Bauer, C.;
Bernhard, S.;
Biegger, M.;
Canelli, F.;
Capasso, M.;
Diebold, S.;
Eisenkolb, F.;
Eschbach, S.;
Florin, D.;
Föhr, C.;
Funk, S.;
Gadola, A.;
Garrecht, F.;
Jung, I.;
Kalekin, O.;
Kalkuhl, C.;
Kihm, T.;
Lahmann, R.;
Pfeifer, M.;
Principe, G.;
Pühlhofer, G.;
Pürckhauer, S.;
Reimer, O.;
Santangelo, A.;
Scalici, M.;
Schanz, T.;
Schwab, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vollhardt, A.;
Wolf, D.
Submitted: 2019-07-22
FlashCam is a camera proposed for the medium-sized telescopes of the
Cherenkov Telescope Array (CTA). We compare camera trigger rates obtained from
measurements with the camera prototype in the laboratory and Monte-Carlo
simulations, when scanning the parameter space of the fully-digital trigger
logic and the intensity of a continuous light source mimicking the night sky
background (NSB) during on-site operation. The comparisons of the measured data
results to the Monte-Carlo simulations are used to verify the FlashCam trigger
logic and the expected trigger performance.
[2]
oai:arXiv.org:1803.02895 [pdf] - 1646328
MCP detector development for UV space missions
Conti, Lauro;
Barnstedt, Jürgen;
Hanke, Lars;
Kalkuhl, Christoph;
Kappelmann, Norbert;
Rauch, Thomas;
Stelzer, Beate;
Werner, Klaus;
Elsener, Hans-Rudolf;
Schaadt, Daniel M.
Submitted: 2018-03-06
We are developing imaging and photon counting UV-MCP detectors, which are
sensitive in the wavelength range from far ultraviolet to near ultraviolet. A
good quantum efficiency, solar blindness and high spatial resolution is the aim
of our development. The sealed detector has a Cs-activated photoactive layer of
GaN (or similarly advanced photocathode), which is operated in semitransparent
mode on (001)-MgF 2 . The detector comprises a stack of two long-life MCPs and
a coplanar cross strip anode with advanced readout electronics. The main
challenge is the flawless growth of the GaN photocathode layer as well as the
requirements for the sealing of the detector, to prevent a degradation of the
photocathode. We present here the detector concept and the experimental setup,
examine in detail the status in the production and describe the current status
of the readout electronics development.
[3]
oai:arXiv.org:1612.09528 [pdf] - 1533980
Performance Verification of the FlashCam Prototype Camera for the
Cherenkov Telescope Array
Werner, F.;
Bauer, C.;
Bernhard, S.;
Capasso, M.;
Diebold, S.;
Eisenkolb, F.;
Eschbach, S.;
Florin, D.;
Föhr, C.;
Funk, S.;
Gadola, A.;
Garrecht, F.;
Hermann, G.;
Jung, I.;
Kalekin, O.;
Kalkuhl, C.;
Kasperek, J.;
Kihm, T.;
Lahmann, R.;
Marszalek, A.;
Pfeifer, M.;
Principe, G.;
Pühlhofer, G.;
Pürckhauer, S.;
Rajda, P. J.;
Reimer, O.;
Santangelo, A.;
Schanz, T.;
Schwab, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vollhardt, A.;
Wolf, D.;
Zietara, K.
Submitted: 2016-12-30
The Cherenkov Telescope Array (CTA) is a future gamma-ray observatory that is
planned to significantly improve upon the sensitivity and precision of the
current generation of Cherenkov telescopes. The observatory will consist of
several dozens of telescopes with different sizes and equipped with different
types of cameras. Of these, the FlashCam camera system is the first to
implement a fully digital signal processing chain which allows for a traceable,
configurable trigger scheme and flexible signal reconstruction. As of autumn
2016, a prototype FlashCam camera for the medium-sized telescopes of CTA nears
completion. First results of the ongoing system tests demonstrate that the
signal chain and the readout system surpass CTA requirements. The stability of
the system is shown using long-term temperature cycling.
[5]
oai:arXiv.org:1610.04392 [pdf] - 1580403
An Efficient Test Facility For The Cherenkov Telescope Array FlashCam
Readout Electronics Production
Submitted: 2016-10-14
The Cherenkov Telescope Array (CTA) is the planned next-generation instrument
for ground-based gamma-ray astronomy, currently under preparation by a
world-wide consortium. The FlashCam group is preparing a photomultiplier-based
camera for the Medium Size Telescopes of CTA, with a fully digital Readout
System (ROS). For the forthcoming mass production of a substantial number of
cameras, efficient test routines for all components are currently under
development. We report here on a test facility for the ROS components. A test
setup and routines have been developed and an early version of that setup has
successfully been used to test a significant fraction of the ROS for the
FlashCam camera prototype in January 2016. The test setup with its components
and interface, as well as first results, are presented here.
[7]
oai:arXiv.org:1509.02434 [pdf] - 1938108
FlashCam: a fully-digital camera for the medium-sized telescopes of the
Cherenkov Telescope Array
Pühlhofer, G.;
Bauer, C.;
Bernhard, S.;
Capasso, M.;
Diebold, S.;
Eisenkolb, F.;
Florin, D.;
Föhr, C.;
Funk, S.;
Gadola, A.;
Garrecht, F.;
Hermann, G.;
Jung, I.;
Kalekin, O.;
Kalkuhl, C.;
Kasperek, J.;
Kihm, T.;
Lahmann, R.;
Manalaysay, A.;
Marszalek, A.;
Pfeifer, M.;
Rajda, P. J.;
Reimer, O.;
Santangelo, A.;
Schanz, T.;
Schwab, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vollhardt, A.;
Weitzel, Q.;
Werner, F.;
Wolf, D.;
Zietara, K.
Submitted: 2015-09-08
The FlashCam group is currently preparing photomultiplier-tube based cameras
proposed for the medium-sized telescopes (MST) of the Cherenkov Telescope Array
(CTA). The cameras are designed around the FlashCam readout concept which is
the first fully-digital readout system for Cherenkov cameras, based on
commercial FADCs and FPGAs as key components for the front-end electronics
modules and a high performance camera server as back-end. This contribution
describes the progress of the full-scale FlashCam camera prototype currently
under construction, as well as performance results also obtained with earlier
demonstrator setups. Plans towards the production and implementation of
FlashCams on site are also briefly presented.
[9]
oai:arXiv.org:1307.3677 [pdf] - 1941893
FlashCam: A fully digital camera for the Cherenkov Telescope Array
Pühlhofer, G.;
Bauer, C.;
Eisenkolb, F.;
Florin, D.;
Föhr, C.;
Gadola, A.;
Hermann, G.;
Kalkuhl, C.;
Kasperek, J.;
Kihm, T.;
Koziol, J.;
Manalaysay, A.;
Marszalek, A.;
Rajda, P. J.;
Romaszkan, W.;
Rupinski, M.;
Schanz, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vollhardt, A.;
Weitzel, Q.;
Winiarski, K.;
Zietara, K.
Submitted: 2013-07-13
FlashCam is a Cherenkov camera development project centered around a fully
digital trigger and readout scheme with smart, digital signal processing, and a
"horizontal" architecture for the electromechanical implementation. The fully
digital approach, based on commercial FADCs and FPGAs as key components,
provides the option to easily implement different types of triggers as well as
digitization and readout scenarios using identical hardware, by simply changing
the firmware on the FPGAs. At the same time, a large dynamic range and high
resolution of low-amplitude signals in a single readout channel per pixel is
achieved using compression of high amplitude signals in the preamplifier and
signal processing in the FPGA. The readout of the front-end modules into a
camera server is Ethernet-based using standard Ethernet switches. In its
current implementation, data transfer and backend processing rates of ~3.8
GBytes/sec have been achieved. Together with the dead-time-free front end event
buffering on the FPGAs, this permits the cameras to operate at trigger rates of
up to several tens of kHz.
In the horizontal architecture of FlashCam, the photon detector plane (PDP),
consisting of photon detectors, preamplifiers, high voltage-, control-, and
monitoring systems, is a self-contained unit, which is interfaced through
analogue signal transmission to the digital readout system. The horizontal
integration of FlashCam is expected not only to be more cost efficient, it also
allows PDPs with different types of photon detectors to be adapted to the
FlashCam readout system. This paper describes the FlashCam concept, its
verification process, and its implementation for a 12 m class CTA telescope
with PMT-based PDP.
[10]
oai:arXiv.org:1211.3684 [pdf] - 1941855
FlashCam: A fully digital camera for CTA telescopes
Pühlhofer, G.;
Bauer, C.;
Biland, A.;
Florin, D.;
Föhr, C.;
Gadola, A.;
Hermann, G.;
Kalkuhl, C.;
Kasperek, J.;
Kihm, T.;
Koziol, J.;
Manalaysay, A.;
Marszalek, A.;
Rajda, P. J.;
Schanz, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vogler, P.;
Vollhardt, A.;
Weitzel, Q.;
Winiarski, K.;
Zietara, K.
Submitted: 2012-11-15
The future Cherenkov Telescope Array (CTA) will consist of several tens of
telescopes of different mirror sizes. CTA will provide next generation
sensitivity to very high energy photons from few tens of GeV to >100 TeV.
Several focal plane instrumentation options are currently being evaluated
inside the CTA consortium. In this paper, the current status of the FlashCam
prototyping project is described. FlashCam is based on a fully digital camera
readout concept and features a clean separation between photon detector plane
and signal digitization/triggering electronics.