Normalized to: Kaiser, E.
[1]
oai:arXiv.org:2006.01877 [pdf] - 2115380
Relative Importance of Convective Uncertainties in Massive Stars
Submitted: 2020-06-02
In this work, we investigate the impact of uncertainties due to convective
boundary mixing (CBM), commonly called `overshoot', namely the boundary
location and the amount of mixing at the convective boundary, on stellar
structure and evolution. For this we calculated two grids of stellar evolution
models with the MESA code, each with the Ledoux and the Schwarzschild boundary
criterion, and vary the amount of CBM. We calculate each grid with the initial
masses $15$, $20$ and $25\,\rm{M}_\odot$. We present the stellar structure of
the models during the hydrogen and helium burning phases. In the latter, we
examine the impact on the nucleosynthesis. We find a broadening of the
main-sequence with more CBM, which is more in agreement with observations.
Furthermore during the core hydrogen burning phase there is a convergence of
the convective boundary location due to CBM. The uncertainties of the
intermediate convective zone remove this convergence. The behaviour of this
convective zone strongly affects the surface evolution of the model, i.e. how
fast it evolves red-wards. The amount of CBM impacts the size of the convective
cores and the nucleosynthesis, e.g. the $^{12}$C to $^{16}$O ratio and the weak
s-process. Lastly, we determine the uncertainty that the range of parameter
values investigated introduce and we find differences of up to $70\%$ for the
core masses and the total mass of the star.
[2]
oai:arXiv.org:1706.07053 [pdf] - 2084968
The evolutionary roads leading to low effective spins, high black hole
masses, and O1/O2 rates of LIGO/Virgo binary black holes
Belczynski, K.;
Klencki, J.;
Fields, C. E.;
Olejak, A.;
Berti, E.;
Meynet, G.;
Fryer, C. L.;
Holz, D. E.;
O'Shaughnessy, R.;
Brown, D. A.;
Bulik, T.;
Leung, S. C.;
Nomoto, K.;
Madau, P.;
Hirschi, R.;
Kaiser, E.;
Jones, S.;
Mondal, S.;
Chruslinska, M.;
Drozda, P.;
Gerosa, D.;
Doctor, Z.;
Giersz, M.;
Ekstrom, S.;
Georgy, C.;
Askar, A.;
Baibhav, V.;
Wysocki, D.;
Natan, T.;
Farr, W. M.;
Wiktorowicz, G.;
Miller, M. Coleman;
Farr, B.;
Lasota, J. -P.
Submitted: 2017-06-21, last modified: 2020-03-06
All ten LIGO/Virgo binary black hole (BH-BH) coalescences reported from the
O1/O2 runs have near zero effective spins. There are only three potential
explanations of this fact. If the BH spin magnitudes are large then (i) either
both BH spin vectors must be nearly in the orbital plane or (ii) the spin
angular momenta of the BHs must be oppositely directed and similar in
magnitude. Or, (iii) the BH spin magnitudes are small. We test the third
hypothesis within the framework of the classical isolated binary evolution
scenario of the BH-BH merger formation. We test three models of angular
momentum transport in massive stars: a mildly efficient transport by meridional
currents (as employed in the Geneva code), an efficient transport by the
Tayler-Spruit magnetic dynamo (as implemented in the MESA code), and a
very-efficient transport (as proposed by Fuller et al.) to calculate natal BH
spins. We allow for binary evolution to increase the BH spins through accretion
and account for the potential spin-up of stars through tidal interactions.
Additionally, we update the calculations of the stellar-origin BH masses,
include revisions to the history of star formation and to the chemical
evolution across cosmic time. We find that we can match simultaneously the
observed BH-BH merger rate density, BH masses, and effective spins. Models with
efficient angular momentum transport are favored. The updated stellar-mass
weighted gas-phase metallicity evolution now used in our models appears to be a
key in better reproducing the LIGO/Virgo merger rate estimate. Mass losses
during the pair-instability pulsation supernova phase are likely overestimated
if the merger GW170729 hosts a BH more massive than 50 Msun. We also estimate
rate of BH-NS mergers from recent LIGO/Virgo observations. Our updated models
of BH-BH, BH-NS and NS-NS mergers are now publicly available at
www.syntheticuniverse.org.
[3]
oai:arXiv.org:1911.12357 [pdf] - 2054086
The Formation of a 70 Msun Black Hole at High Metallicity
Belczynski, K.;
Hirschi, R.;
Kaiser, E. A.;
Liu, Jifeng;
Casares, J.;
Lu, Youjun;
O'Shaughnessy, R.;
Heger, A.;
Justham, S.;
Soria, R.
Submitted: 2019-11-27, last modified: 2020-01-11
A 70Msun BH was discovered in Milky Way disk in a long period and almost
circular detached binary system (LB-1) with a high metallicity 8Msun B star
companion. Current consensus on the formation of BHs from high metallicity
stars limits the black hole mass to be below 20Msun. Using simple evolutionary
model, we show that the formation of a 70Msun BH in high metallicity
environment is possible if stellar wind mass loss rates are reduced by factor
of 5. As observations indicate, a fraction of massive stars have surface
magnetic fields which may quench the wind mass-loss, independently of stellar
mass and metallicity. We also computed detailed stellar evolution models and we
confirm such a scenario. A non-rotating 85Msun model at Z=0.014 with decreased
winds ends up as a 71Msun star prior core-collapse with a 32Msun helium core
and a 28Msun CO core. Such star avoids pair-instability pulsation supernova
mass loss and may form a 70Msun BH in the direct collapse. Stars that can form
such BHs expand to significant size with radius of R>600Rsun, exceeding the
size of LB-1 orbit. Therefore, we can explain the formation of BHs upto 70Msun
at high metallicity and this result is independent from LB-1. However, if LB-1
hosts a massive BH we are unable to explain how such a binary star system could
have formed without invoking some exotic scenarios.
[4]
oai:arXiv.org:1810.04659 [pdf] - 2021132
3D simulations and MLT: II. RA-ILES results
Arnett, W. David;
Meakin, Casey;
Hirschi, Raphael;
Cristini, Andrea;
Georgy, Cyril;
Campbell, Simon;
Scott, Laura J. A.;
Kaiser, Etienne A.;
Viallet, Maxime;
Mocák, Miroslav
Submitted: 2018-10-10, last modified: 2019-12-26
We find an asymptotic limit for the integral scale dissipation length in
strongly stratified stellar convection; this is not adjustable, and we identify
it with the "mixing length parameter", $\alpha \sim 5/3$, a theoretical
prediction which agrees to within 10% with the fitted empirical values quoted
by eight independent stellar evolutionary groups, as well as several 3D stellar
atmosphere groups. For strong stratification, the dissipation length approaches
the density scale height; in weak stratification it shrinks to the depth for
such thin convective regions. Simulations with different zoning give a
monotonic decrease in resolution errors with added zones, down to barely
detectable for the most difficult case (lower boundary layer), and an estimate
of the dissipation due to the turbulent cascade. No explicit viscosity is
required; stellar dissipation occurs from nonlinear fluid effects (Taylor,
Onsager). These implicit large eddy simulations of the Euler equations, with
simultaneous analysis by Reynolds averaging (RA-ILES), resolve the
energy-containing eddies, develop a turbulent cascade down to the grid scale,
and produce surfaces of separation at boundary layers. Like experiments
(Warhaft), and direct numerical simulations of the Navier-Stokes equations
(DNS, Sreenivasan), our simulations develop "anomalous terms" for dissipation
in the turbulent cascade (due to intermittency, anisotropy, and interactions
between coherent structures). They have more realistic behavior at high order
than the K41 theory of Kolmogorov. Mixing length theory (MLT, Boehm-Vitense)
overestimates the convective enthalpy flux for strong stratification, which has
consequences for the theory of luminous blue variables, for the solar metal
abundance, and deep solar convection.
[5]
oai:arXiv.org:1810.04653 [pdf] - 1953342
3D Simulations and MLT: I. Renzini's Critique
Submitted: 2018-10-10
Renzini (1987) wrote an influential critique of mixing-length theory (MLT) as
used in stellar evolution codes, and concluded that three-dimensional (3D)
fluid dynamical simulations were needed to clarify several important issues. We
have critically explored the limitations of the numerical methods and conclude
that they are approaching the required accuracy. Implicit large eddy
simulations (ILES) automatically connect large scale turbulence to a Kolmogorov
cascade below the grid scale, allowing turbulent boundary layers to remove
singularities that appear in the theory. Interactions between coherent
structures give multi-modal behavior, driving intermittency and fluctuations.
Reynolds averaging (RA) allows us to abstract the essential features of this
dynamical behavior of boundaries which are appropriate to stellar evolution,
and consider how they relate static boundary conditions (Richardson,
Schwarzschild or Ledoux). We clarify several questions concerning when and why
MLT works, and does not work, using both analytical theory and 3D high
resolution numerical simulations. The composition gradients and boundary layer
structure which are produced by our simulations suggest a self-consistent
approach to boundary layers, removing the need for ad hoc procedures for
'convective overshooting' and `semi-convection'. In a companion paper we
quantify the adequacy of our numerical resolution, determine of the length
scale of dissipation (the `mixing length') without astronomical calibration,
quantify agreement with the four-fifths law of Kolmogorov for weak
stratification, and extend MLT to deal with strong stratification.
[6]
oai:arXiv.org:1810.01156 [pdf] - 2025322
Relative Importance of Convective Uncertainties
Submitted: 2018-10-02
Convection plays a key role in the evolution of stars due to energy transport
and mixing of composition. Despite its importance, this process is still not
well understood. One longstanding conundrum in all 1D stellar evolution codes
is the treatment of convective boundaries. In this study we compare two
convective uncertainties, the boundary location (Ledoux versus Schwarzschild)
and the amount of extra mixing, and their impact on the early evolution of
massive stars. With increasing convective boundary mixing (CBM), we find a
convergence of the two different boundary locations, a decreasing blue to red
super giant ratio and a reduced importance of semiconvection.
[7]
oai:arXiv.org:1809.01045 [pdf] - 2025313
Women Scientists Who Made Nuclear Astrophysics
Hampton, C. V.;
Lugaro, M.;
Papakonstantinou, P.;
Isar, P. G.;
Nordström, B.;
Özkan, N.;
Aliotta, M.;
Ćiprijanović, A.;
Curtis, S.;
Di Criscienzo, M.;
Hartogh, J. den;
Font, A. S.;
Kankainen, A.;
Kobayashi, C.;
Lederer-Woods, C.;
Niemczura, E.;
Rauscher, T.;
Spyrou, A.;
Van Eck, S.;
Yavahchova, M.;
Chantereau, W.;
de Mink, S. E.;
Kaiser, E.;
Thielemann, F. -K.;
Travaglio, C.;
Venkatesan, A.;
Collet, R.
Submitted: 2018-08-25
Female role models reduce the impact on women of stereotype threat, i.e., of
being at risk of conforming to a negative stereotype about one's social,
gender, or racial group. This can lead women scientists to underperform or to
leave their scientific career because of negative stereotypes such as, not
being as talented or as interested in science as men. Sadly, history rarely
provides role models for women scientists; instead, it often renders these
women invisible. In response to this situation, we present a selection of
twelve outstanding women who helped to develop nuclear astrophysics.