Directly imaged planets and substellar companions are key targets for the characterization of self-luminous atmospheres. Their photometric appearance at 4-5 $\mu$m is sensitive to the chemical composition and cloud content of their atmosphere. We aim at systematically characterizing the atmospheres of directly imaged low-mass companions at 4-5 $\mu$m. We want to homogeneously process the data and compile a photometric library at thermal wavelengths of these mostly young, low-gravity objects. In this way, we want to find trends related to their spectral type and surface gravity by comparing with isolated brown dwarfs and predictions from atmospheric models. We have used the high-resolution, high-contrast capabilities of NACO at the VLT to directly image the companions of HIP 65426, PZ Tel, and HD 206893 in the NB4.05 and/or $M'$ filters. For the same targets, and additionally $\beta$ Pic, we have also analyzed six archival VLT/NACO datasets which were taken with the NB3.74, $L'$, NB4.05, and $M'$ filters. The $L'$-NB4.05 and $L'$-$M'$ colors of the studied sample are all red while the NB4.05-$M'$ color is blue for $\beta$ Pic b, gray for PZ Tel B, and red for HIP 65426 b and HD 206893 B (although typically with low significance). The absolute NB4.05 and $M'$ fluxes of our sample are all larger than those of field dwarfs with similar spectral types. Finally, the surface gravity of $\beta$ Pic b has been constrained to $\log{g} = 4.17_{-0.13}^{+0.10}$ dex from its photometry and dynamical mass. A red color at 3-4 $\mu$m and a blue color at 4-5 $\mu$m might be (partially) caused by H$_2$O and CO absorption, respectively. The red characteristics of $\beta$ Pic b, HIP 65426 b, and HD 206893 B at 3-5$\mu$m, as well as their higher fluxes in NB4.05 and $M'$ compared to field dwarfs, indicate that cloud densities are enhanced close to the photosphere as a result of their low surface gravity.

Direct detection and detailed characterization of exoplanets using extreme adaptive optics (ExAO) is a key science goal of future extremely large telescopes (ELTs). However, wavefront errors will limit the sensitivity of this endeavor. Limitations for ground-based telescopes arise from both quasi-static and residual AO-corrected atmospheric wavefront errors, the latter of which generates short-lived aberrations that will average into a halo over a long exposure. We have developed and tested the framework for a solution to both of these problems using the self-coherent camera (SCC), to be applied to ground-based telescopes, called the Fast Atmospheric SCC Technique (FAST). In this paper we present updates of new and ongoing work for FAST, both in numerical simulation and in the laboratory. We first present numerical simulations that illustrate the scientific potential of FAST, including, with current 10-m telescopes, the direct detection of exoplanets reflected light and exo-Jupiters in thermal emission and, with future ELTs, the detection of habitable exoplanets. In the laboratory, we present the first characterizations of our proposed, and now fabricated, coronagraphic masks.

We present the design of a point-and-shoot non-imaging full-Stokes spectropolarimeter dedicated to detecting life on Earth from an orbiting platform like the ISS. We specifically aim to map circular polarization in the spectral features of chlorophyll and other biopigments for our planet as a whole. These non-zero circular polarization signatures are caused by homochirality of the molecular and supramolecular configurations of organic matter, and are considered the most unambiguous biomarker. To achieve a fully solid-state snapshot design, we implement a novel spatial modulation that completely separates the circular and linear polarization channels. The polarization modulator consists of a patterned liquid-crystal quarter-wave plate inside the spectrograph slit, which also constitutes the first optical element of the instrument. This configuration eliminates cross-talk between linear and circular polarization, which is crucial because linear polarization signals are generally much stronger than the circular polarization signals. This leads to a quite unorthodox optical concept for the spectrograph, in which the object and the pupil are switched. We discuss the general design requirements and trade-offs of LSDpol (Life Signature Detection polarimeter), a prototype instrument that is currently under development.

The Palomar Fiber Nuller (PFN) is a rotating-baseline nulling interferometer that enables high-accuracy near-infrared (NIR) nulling observations with full azimuth coverage. To achieve NIR null-depth accuracies of several x 10-4, the PFN uses a common-mode optical system to provide a high degree of symmetry, single-mode-fiber beam combination to reduce sensitivity to pointing and wavefront errors, extreme adaptive optics to stabilize the fiber coupling and the cross-aperture fringe phase, rapid signal calibration and camera readout to minimize temporal effects, and a statistical null-depth fluctuation analysis to relax the phase stabilization requirement. Here we describe the PFN final design and performance, and provide a demonstration of faint-companion detection by means of nulling-baseline rotation, as originally envisioned for space-based nulling interferometry. Specifically, the Ks-band null-depth rotation curve measured on the spectroscopic binary eta Peg reflects both a secondary star 1.08 +/- 0.06 x 10-2 as bright as the primary, and a null-depth contribution of 4.8 +/- 1.6 x 10-4 due to the size of the primary star. With a 30 mas separation at the time, eta Peg B was well inside both the telescope diffraction-limited beam diameter (88 mas) and typical coronagraphic inner working angles. Finally, we discuss potential improvements that can enable a number of small-angle nulling observations on larger telescopes.

Proxima b is a terrestrial exoplanet orbiting in the habitable zone of our closest star Proxima Centauri. The separation between the planet and the star is about 40 mas and this is with current instruments only reachable with direct imaging, using a visual extreme AO system like SPHERE/ZIMPOL. Unfortunately, the planet falls under the first airy ring at 2$\lambda$/D in the I band, which degrades achievable contrast. We present the design, optical simulations and testing of an amplitude pupil mask for ZIMPOL that reshapes the PSF, increasing the contrast at $r = 2\lambda$/D about an order of magnitude. The simple mask can be inserted directly into the current setup of SPHERE.

The Optimal Optical Coronagraph (OOC) Workshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this first installment of a series of three papers summarizing the outcomes of the OOC workshop, we present an overview of design methods and optical performance metrics developed for coronagraph instruments. The design and optimization of coronagraphs for future telescopes has progressed rapidly over the past several years in the context of space mission studies for Exo-C, WFIRST, HabEx, and LUVOIR as well as ground-based telescopes. Design tools have been developed at several institutions to optimize a variety of coronagraph mask types. We aim to give a broad overview of the approaches used, examples of their utility, and provide the optimization tools to the community. Though it is clear that the basic function of coronagraphs is to suppress starlight while maintaining light from off-axis sources, our community lacks a general set of standard performance metrics that apply to both detecting and characterizing exoplanets. The attendees of the OOC workshop agreed that it would benefit our community to clearly define quantities for comparing the performance of coronagraph designs and systems. Therefore, we also present a set of metrics that may be applied to theoretical designs, testbeds, and deployed instruments. We show how these quantities may be used to easily relate the basic properties of the optical instrument to the detection significance of the given point source in the presence of realistic noise.

The vector vortex is a coronagraphic imaging mode of the recently commissioned Subaru Coronagraphic Extreme-Adaptive Optics (SCExAO) platform on the 8-m Subaru Telescope. This multi-purpose high-contrast visible and near-infrared (R- to K-band) instrument is not only intended to serve as a VLT-class "planet-imager" instrument in the Northern hemisphere, but also to operate as a technology demonstration testbed ahead of the ELTs-era, with a particular emphasis on small inner-working angle (IWA) coronagraphic capabilities. The given priority to small-IWA imaging led to the early design choice to incorporate focal-plane phase-mask coronagraphs. In this context, a test H-band vector vortex liquid crystal polymer waveplate was provided to SCExAO, to allow a one-to-one comparison of different small-IWA techniques on the same telescope instrument, before considering further steps. Here we present a detailed overview of the vector vortex coronagraph, from its installation and performances on the SCExAO optical bench, to the on-sky results in the extreme AO regime, as of late 2016/early 2017. To this purpose, we also provide a few recent on-sky imaging examples, notably high-contrast ADI detection of the planetary-mass companion \kappa Andromedae b, with a signal-to-noise ratio above 100 reached in less than 10 mn exposure time.

Direct imaging of exoplanets or circumstellar disk material requires extreme contrast at the 10-6 to 10-12 levels at < 100 mas angular separation from the star. Focal-plane mask (FPM) coronagraphic imaging has played a key role in this field, taking advantage of progress in Adaptive Optics on ground-based 8+m class telescopes. However, large telescope entrance pupils usually consist of complex, sometimes segmented, non-ideal apertures, which include a central obstruction for the secondary mirror and its support structure. In practice, this negatively impacts wavefront quality and coronagraphic performance, in terms of achievable contrast and inner working angle. Recent theoretical works on structured darkness have shown that solutions for FPM phase profiles, optimized for non-ideal apertures, can be numerically derived. Here we present and discuss a first experimental validation of this concept, using reflective liquid crystal spatial light modulators as adaptive FPM coronagraphs.