Instrumentation techniques in the field of direct imaging of exoplanets have greatly advanced over the last two decades. Two of the four NASA-commissioned large concept studies involve a high-contrast instrument for the imaging and spectral characterization of exo-Earths from space: LUVOIR and HabEx. This whitepaper describes the status of 8 optical testbeds in the US and France currently in operation to experimentally validate the necessary technologies to image exo-Earths from space. They explore two complementary axes of research: (i) coronagraph designs and manufacturing and (ii) active wavefront correction methods and technologies. Several instrument architectures are currently being analyzed in parallel to provide more degrees of freedom for designing the future coronagraphic instruments. The necessary level of performance has already been demonstrated in-laboratory for clear off-axis telescopes (HabEx-like) and important efforts are currently in development to reproduce this accomplishment on segmented and/or on-axis telescopes (LUVOIR-like) over the next two years.

Determining the distribution and spectral signature of volatile ices and organics exposed on icy body surfaces can provide crucial clues for deciphering how the outer solar system formed and evolved. Over the past few decades, ground- and space-based telescope observations have probed the compositions of a wide range of icy objects with primordial and processed surfaces, revealing the presence of numerous volatile ices and organic residues. Although these telescope observations have advanced our understanding of icy bodies beyond Saturn, the sensitivity and spatial resolution of collected datasets are limited by the large heliocentric distances of these far-flung objects. Furthermore, most observations have focused on the visible (VIS, 0.4 - 0.7 microns) and near-infrared (NIR, 0.7 - 2.5 microns), with fewer observations at longer NIR wavelengths (2.5 - 5.0 microns) and in the far to near ultraviolet (UV, 0.1 - 0.4 microns), which represents a critical wavelength region for investigating modification of ices and organics by UV photolysis and charged particle radiolysis. Thus, our understanding of icy bodies beyond Saturn is limited by the capabilities of available facilities, and key questions regarding their surface compositions remain to be explored. Next generation space telescopes (NGSTs) with greater sensitivity and angular resolution in the UV, VIS, and longer NIR are therefore needed to help unveil the surface compositions of icy bodies residing at the fringes of our solar system.

Double-Fourier interferometry is the most viable path to sub-arcsecond spatial resolution for future astronomical instruments that will observe the universe at far-infrared wavelengths. The double transform spatio-spectral interferometry couples pupil plane beam combination with detector arrays to enable imaging spectroscopy of wide fields, that will be key to accomplishing top-level science goals. The wide field of view and the necessity for these instruments to fly above the opaque atmosphere create unique characteristics and requirements compared to instruments on ground-based telescopes. In this paper, we discuss some characteristics of single-baseline spatio-spectral interferometers. We investigate the impact of intensity and optical path difference noise on the interferogram and the spectral signal-to-noise ratio. We apply our findings to the special case of the Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII), a balloon payload that will be a first application of this technique at far-infrared wavelengths on a flying platform.

A laboratory prototype spectral/spatial interferometer has been constructed to demonstrate the feasibility of the double Fourier technique at Far Infrared (FIR) wavelengths (0.15 - 1 THz). It is planned to use this demonstrator to investigate and validate important design features and data processing methods for future astronomical FIR interferometer instruments. In building this prototype we have had to address several key technologies to provide an end-end system demonstration of this double Fourier interferometer. We report on the first results taken when viewing single slit and double slit sources at the focus of a large collimator used to simulate real sources at infinity. The performance of the prototype instrument for these specific field geometries is analyzed to compare with the observed interferometric fringes and to demonstrate image reconstruction capabilities.