Accurate masses and radii for normal stars derived from observations of detached eclipsing binary stars are of fundamental importance for testing stellar models and may be useful for calibrating free parameters in these model if the masses and radii are sufficiently precise and accurate. We aim to measure precise masses and radii for the stars in the bright eclipsing binary AI Phe, and to quantify the level of systematic error in these estimates. We use several different methods to model the TESS light curve of AI Phe combined with spectroscopic orbits from multiple sources to estimate precisely the stellar masses and radii together with robust error estimates. We find that the agreement between different methods for the light curve analysis is very good but some methods underestimate the errors on the model parameters. The semi-amplitudes of the spectroscopic orbits derived from spectra obtained with modern echelle spectrographs are consistent to within 0.1%. The masses of the stars in AI Phe are $M_1 = 1.1938 \pm 0.0008 M_{\odot}$ and $M_2 = 1.2438 \pm 0.0008M_{\odot}$, and the radii are $R_1 = 1.8050 \pm 0.0022 R_{\odot}$ and $R_2 = 2.9332 \pm 0.0023 R_{\odot}$. We conclude that it is possible to measure accurate masses and radii for stars in bright eclipsing binary stars to a precision of 0.2% or better using photometry from TESS and spectroscopy obtained with modern echelle spectrographs. We provide recommendations for publishing masses and radii of eclipsing binary stars at this level of precision.

(Abridged) Eclipsing, spectroscopic double-lined binary star systems (SB2) are excellent laboratories for calibrating theories of stellar interior structure and evolution. We aim to investigate the mass discrepancy in binary stars. We study the effect of near-core mixing on the mass of the convective core of the stars and interpret the results in the context of the mass discrepancy. Two scenarios are considered, where individual stellar components of a binary system are treated independent of each other and where they are forced to have the same age and initial chemical composition. We find that the mass discrepancy is present in our sample and that it is anti-correlated with the surface gravity of the star. No correlations are found with other fundamental and atmospheric parameters, including the stellar mass. The mass discrepancy can be partially accounted for by increasing the amount of near-core mixing in stellar evolution models. We also find that ignoring the microturbulent velocity and turbulent pressure in stellar atmosphere models of hot evolved stars results in overestimation of their effective temperature by up to 8%. Together with enhanced near-core mixing, this can almost entirely account for the 30% mass discrepancy found for the evolved primary component of V380 Cyg. We find a strong link between the mass discrepancy and the convective core mass. The mass discrepancy can be solved by considering the combined effect of extra near-core boundary mixing and consistent treatment in the spectrum analysis of hot evolved stars. Our binary modelling results in convective core masses between 17 and 35% of the stellar mass, in excellent agreement with results from gravity-mode asteroseismology of single stars. This implies larger helium core masses near the end of the main sequence than anticipated so far.

Modelling the solar Transition Region with the use of an Adaptive Conduction (TRAC) method permits fast and accurate numerical solutions of the field-aligned hydrodynamic equations, capturing the enthalpy exchange between the corona and transition region, when the corona undergoes impulsive heating. The TRAC method eliminates the need for highly resolved numerical grids in the transition region and the commensurate very short time steps that are required for numerical stability. When employed with coarse spatial resolutions, typically achieved in multi-dimensional magnetohydrodynamic codes, the errors at peak density are less than 5% and the computation time is three orders of magnitude faster than fully resolved field-aligned models. This paper presents further examples that demonstrate the versatility and robustness of the method over a range of heating events, including impulsive and quasi-steady footpoint heating. A detailed analytical assessment of the TRAC method is also presented, showing that the approach works through all phases of an impulsive heating event because (i) the total radiative losses and (ii) the total heating when integrated over the transition region are both preserved at all temperatures under the broadening modifications of the method. The results from the numerical simulations complement this conclusion.

Phase mixing of Alfv\'en waves has been studied extensively as a possible coronal heating mechanism but without the full thermodynamic consequences considered self-consistently. It has been argued that in some cases, the thermodynamic feedback of the heating could substantially affect the transverse density gradient and even inhibit the phase mixing process. In this paper, we use MHD simulations with the appropriate thermodynamical terms included to quantify the evaporation following heating by phase mixing of Alfv\'en waves in a coronal loop and the effect of this evaporation on the transverse density profile. The numerical simulations were performed using the Lare2D code. We set up a 2D loop model consisting of a field-aligned thermodynamic equilibrium and a cross-field (background) heating profile. A continuous, sinusoidal, high-frequency Alfv\'en wave driver was implemented. As the Alfv\'en waves propagate along the field, they undergo phase mixing due to the cross-field density gradient in the coronal part of the loop. We investigated the presence of field-aligned flows, heating from the dissipation of the phase-mixed Alfv\'en waves, and the subsequent evaporation from the lower atmosphere. We find that phase mixing of Alfv\'en waves leads to modest heating in the shell regions of the loop and evaporation of chromospheric material into the corona with upflows of the order of only 5-20 m/s. Although the evaporation leads to a mass increase in the shell regions of the loop, the effect on the density gradient and, hence, on the phase mixing process, is insignificant. This paper self-consistently investigates the effect of chromospheric evaporation on the cross-field density gradient and the phase mixing process in a coronal loop. We found that the effects in our particular setup (small amplitude, high frequency waves) are too small to significantly change the density gradient.

HD 62658 (B9p V) is a little-studied chemically peculiar star. Light curves obtained by the Kilodegree Extremely Little Telescope (KELT) and Transiting Exoplanet Survey Satellite (TESS) show clear eclipses with a period of about 4.75 d, as well as out-of-eclipse brightness modulation with the same 4.75 d period, consistent with synchronized rotational modulation of surface chemical spots. High-resolution ESPaDOnS circular spectropolarimetry shows a clear Zeeman signature in the line profile of the primary; there is no indication of a magnetic field in the secondary. PHOEBE modelling of the light curve and radial velocities indicates that the two components have almost identical masses of about 3 M$_\odot$. The primary's longitudinal magnetic field $\langle B_z \rangle$ varies between about $+100$ and $-250$ G, suggesting a surface magnetic dipole strength $B_{\rm d} = 850$~G. Bayesian analysis of the Stokes $V$ profiles indicates $B_{\rm d} = 650$~G for the primary and $B_{\rm d} < 110$ G for the secondary. The primary's line profiles are highly variable, consistent with the hypothesis that the out-of-eclipse brightness modulation is a consequence of rotational modulation of that star's chemical spots. We also detect a residual signal in the light curve after removal of the orbital and rotational modulations, which might be pulsational in origin; this could be consistent with the weak line profile variability of the secondary. This system represents an excellent opportunity to examine the consequences of magnetic fields for stellar structure via comparison of two stars that are essentially identical with the exception that one is magnetic. The existence of such a system furthermore suggests that purely environmental explanations for the origin of fossil magnetic fields are incomplete.

Extended main-sequence turn-offs (eMSTO) are a commonly observed property of young clusters. A global theoretical interpretation for the eMSTOs is still lacking, but stellar rotation is considered a necessary ingredient to explain the eMSTO. We aim to assess the importance of core-boundary and envelope mixing in stellar interiors for the interpretation of eMSTOs in terms of one coeval population. We construct isochrone-clouds based on interior mixing profiles of stars with a convective core calibrated from asteroseismology of isolated galactic field stars. We fit these isochrone-clouds to the measured eMSTO to estimate the age and core mass of the stars in the two young clusters NGC 1850 and NGC 884, assuming one coeval population and fixing the metallicity to the one measured from spectroscopy. We assess the correlations between the interior mixing properties of the cluster members and their rotational and pulsation properties. We find that stellar models based on asteroseismically-calibrated interior mixing profiles lead to enhanced core masses of eMSTO stars and can explain a good fraction of the observed eMSTOs of the two considered clusters in terms of one coeval population of stars, with similar ages to those in the literature, given the large uncertainties. The rotational and pulsation properties of the stars in NGC 884 are not sufficiently well known to perform asteroseismic modelling, as it is achieved for field stars from space photometry. The stars in NGC 884 for which we have vsini and a few pulsation frequencies show no correlation between these properties and the core masses of the stars that set the cluster age. Future cluster space asteroseismology may allow to interpret the values of the core masses in terms of the physical processes that cause them, based on the modelling of the interior mixing profiles for the individual member stars with suitable identified modes.

We present the first asteroseismic results for $\delta$ Scuti and $\gamma$ Doradus stars observed in Sectors 1 and 2 of the TESS mission. We utilise the 2-min cadence TESS data for a sample of 117 stars to classify their behaviour regarding variability and place them in the Hertzsprung-Russell diagram using Gaia DR2 data. Included within our sample are the eponymous members of two pulsator classes, $\gamma$ Doradus and SX Phoenicis. Our sample of pulsating intermediate-mass stars observed by TESS also allows us to confront theoretical models of pulsation driving in the classical instability strip for the first time and show that mixing processes in the outer envelope play an important role. We derive an empirical estimate of 74% for the relative amplitude suppression factor as a result of the redder TESS passband compared to the Kepler mission using a pulsating eclipsing binary system. Furthermore, our sample contains many high-frequency pulsators, allowing us to probe the frequency variability of hot young $\delta$ Scuti stars, which were lacking in the Kepler mission data set, and identify promising targets for future asteroseismic modelling. The TESS data also allow us to refine the stellar parameters of SX Phoenicis, which is believed to be a blue straggler.

The interior physics of stars is currently not well constrained for early-type stars. This is particularly pertinent for multiple systems as binary interaction becomes more prevalent for more massive stars, which strongly affects their evolution. High-precision photometry from the Transiting Exoplanet Survey Satellite (TESS) mission offers the opportunity to remedy the dearth of observations of pulsating stars that show evidence of binary interaction, specifically pulsating mass-accreting components of semi-detached Algol-type eclipsing binary (oEA) systems. We present the TESS light curve of the circular eclipsing binary system U Gru (TIC 147201138), which shows evidence for free heat-driven pressure modes and a series of tidally-perturbed pressure modes. We highlight the asteroseismic potential of studying pulsating stars in binary systems, and demonstrate how tidal asteroseismology can be applied to infer the influence of binary interaction on stellar structure.

Context: Intermediate-Mass stars are often overlooked as they are not supernova progenitors but still host convective cores and complex atmospheres which require computationally expensive treatment. Due to this, there is a general lack of such stars modelled by state of the art stellar structure and evolution codes. Aims: This paper aims to use high-quality spectroscopy to update the dynamically obtained stellar parameters and produce a new evolutionary assessment of the bright B0.5+B0.5 and B5V+B5V binary systems CW Cep and U Oph. Methods: We use new spectroscopy obtained with the Hermes spectrograph to revisit the photometric binary solution of the two systems. The updated mass ratio and effective temperatures are incorporated to obtain new dynamical masses for the primary and secondary. With these, we perform isochrone-cloud based evolutionary modelling to investigate the core properties of these stars. Results: We report the first abundances for CW Cep and U Oph as well as report an updated dynamical solution for both systems. We find that we cannot uniquely constrain the amount of core boundary mixing in any of the stars we consider. Instead, we report their core masses and compare our results to previous studies. Conclusions: We find that the per-cent level precision on fundamental stellar quantities are accompanied with core mass estimates to between ~ 5-15%. We find that differences in analysis techniques can lead to substantially different evolutionary mode

Almost all massive stars explode as supernovae and form a black hole or neutron star. The remnant mass and the impact of the chemical yield on subsequent star formation and galactic evolution strongly depend on the internal physics of the progenitor star, which is currently not well understood. The theoretical uncertainties of stellar interiors accumulate with stellar age, which is particularly pertinent for the blue supergiant phase. Stellar oscillations represent a unique method of probing stellar interiors, yet inference for blue supergiants is hampered by a dearth of observed pulsation modes. Here we report the detection of diverse variability in blue supergiants using the K2 and TESS space missions. The discovery of pulsation modes or an entire spectrum of low-frequency gravity waves in these stars allow us to map the evolution of hot massive stars towards the ends of their lives. Future asteroseismic modelling will provide constraints on ages, core masses, interior mixing, rotation and angular momentum transport. The discovery of variability in blue supergiants is a step towards a data-driven empirical calibration of theoretical evolution models for the most massive stars in the Universe.

Thermal non-equilibrium (TNE) is believed to be a potentially important process in understanding some properties of the magnetically closed solar corona. Through one-dimensional hydrodynamic models, this paper addresses the importance of the numerical spatial resolution, footpoint heating timescales and background heating on TNE. Inadequate transition region (TR) resolution can lead to significant discrepancies in TNE cycle behaviour, with TNE being suppressed in under-resolved loops. A convergence on the periodicity and plasma properties associated with TNE required spatial resolutions of less than 2 km for a loop of length 180 Mm. These numerical problems can be resolved using an approximate method that models the TR as a discontinuity using a jump condition, as proposed by Johnston et al. (2017a,b). The resolution requirements (and so computational cost) are greatly reduced while retaining good agreement with fully resolved results. Using this approximate method we (i) identify different regimes for the response of coronal loops to time-dependent footpoint heating including one where TNE does not arise and (ii) demonstrate that TNE in a loop with footpoint heating is suppressed unless the background heating is sufficiently small. The implications for the generality of TNE are discussed.

Barium (Ba) dwarfs and CH subgiants are the less-evolved analogues of Ba and CH giants. They are F- to G-type main-sequence stars polluted with heavy elements by a binary companion when the latter was on the Asymptotic Giant Branch (AGB). This companion is now a white dwarf that in most cases cannot be directly detected. We present a large systematic study of 60 objects classified as Ba dwarfs or CH subgiants. Combining radial-velocity measurements from HERMES and SALT high-resolution spectra with radial-velocity data from CORAVEL and CORALIE, we determine the orbital parameters of 27 systems. We also derive their masses by comparing their location in the Hertzsprung-Russell diagram with evolutionary models. We confirm that Ba dwarfs and CH subgiants are not at different evolutionary stages and have similar metallicities, despite their different names. Additionally, Ba giants appear significantly more massive than their main-sequence analogues. This is likely due to observational biases against the detection of hotter main-sequence post-mass-transfer objects. Combining our spectroscopic orbits with the Hipparcos astrometric data, we derive the orbital inclinations and the mass of the WD companion for four systems. Since this cannot be done for all systems in our sample yet (but should be with upcoming Gaia data releases), we also analyse the mass-function distribution of our binaries. We can model this distribution with very narrow mass distributions for the two components and random orbital orientation on the sky. Finally, based on BINSTAR evolutionary models, we suggest that the orbital evolution of low-mass Ba systems can be affected by a second phase of interaction along the Red Giant Branch of the Ba star, impacting on the eccentricities and periods of the giants.

Theoretical scaling relations for solar-like oscillators and red giants are widely used to estimate fundamental stellar parameters. The accuracy and precision of these relations have often been questioned in the literature, with studies often utilising binarity for model-independent validation. However, it has not been tested if the photometric effects of binarity introduce a systematic effect on the extraction of the seismic properties of the pulsating component(s). In this paper, we present an estimation of the impact of a contaminating photometric signal with a distinct background profile on the global asteroseismic parameter $\nu_{\text{max}}$ through the analysis of synthetic red-giant binary light curves. We generate the pulsational and granulation parameters for single red giants with different masses, radii and effective temperatures from theoretical scaling relations and use them to simulate single red-giant light curves with the characteristics of Kepler long-cadence photometric data. These are subsequently blended together according to their light ratio to generate binary red-giant light curves of various configurations. We then perform a differential analysis to characterise the systematic effects of binarity on the extraction of $\nu_{\text{max}}$. We find that the $\nu_{\text{max}}$ extraction for red-giant power spectra featuring overlapping power excesses is unreliable if unconstrained priors are used. Outside of this scenario, we obtain results that are nearly identical to single-star case. We conclude that i) the photometric effects of binarity on the extraction of $\nu_{\text{max}}$ are largely negligible as long as the power excesses of the individual components do not overlap, and that ii) there is minimal advantage to using more than two super-Lorentzian components to model the granulation signal of a binary red-giant.

The evolution of a star is driven by the physical processes in its interior making the theory of stellar structure and evolution the most crucial ingredient for not only stellar evolution studies, but any field of astronomy which relies on the yields along stellar evolution. High-precision time-series photometric data assembled by recent space missions revealed that current models of stellar structure and evolution show major shortcomings already in the two earliest nuclear burning phases, impacting all subsequent phases prior to the formation of the end-of-life remnant. This white paper focuses specifically on the transport of chemical elements and of angular momentum in the stellar structure and evolution models of stars born with convective core, as revealed by their gravity-mode oscillations.

The brightness of the emission from coronal loops in the solar atmosphere is strongly dependent on the temperature and density of the confined plasma. After a release of energy, these loops undergo a heating and upflow phase, followed by a cooling and downflow cycle. Throughout, there are significant variations in the properties of the coronal plasma. In particular, the increased coronal temperature leads to an excess downward heat flux that the transition region is unable to radiate. This generates an enthalpy flux from the transition region to the corona, increasing the coronal density. The enthalpy exchange is highly sensitive to the transition region resolution in numerical simulations. With a numerically under-resolved transition region, major errors occur in simulating the coronal density evolution and, thus, the predicted loop emission. This Letter presents a new method that addresses the difficulty of obtaining the correct interaction between the corona and corona/chromosphere interface. In the transition region, an adaptive thermal conduction approach is used that broadens any unresolved parts of the atmosphere. We show that this approach, referred to as TRAC, successfully removes the influence of numerical resolution on the coronal density response to heating while maintaining high levels of agreement with fully resolved models. When employed with coarse spatial resolutions, typically achieved in multi-dimensional MHD codes, the peak density errors are less than 3% and the computation time is three orders of magnitude faster than fully resolved field-aligned models. The advantages of using TRAC in field-aligned hydrodynamic and multi-dimensional magnetohydrodynamic simulations are discussed.

We report an analysis of the first known Beta Cep pulsator observed by the TESS mission, the runaway star PHL 346 = HN Aqr. The star, previously known as a singly-periodic pulsator, has at least 34 oscillation modes excited, 12 of those in the g-mode domain and 22 p modes. Analysis of archival data implies that the amplitude and frequency of the dominant mode and the stellar radial velocity were variable over time. A binary nature would be inconsistent with the inferred ejection velocity from the Galactic disc of 420 km/s, which is too large to be survivable by a runaway binary system. A kinematic analysis of the star results in an age constraint (23 +- 1 Myr) that can be imposed on asteroseismic modelling and that can be used to remove degeneracies in the modelling process. Our attempts to match the excitation of the observed frequency spectrum resulted in pulsation models that were too young. Hence, asteroseismic studies of runaway pulsators can become vital not only in tracing the evolutionary history of such objects, but to understand the interior structure of massive stars in general. TESS is now opening up these stars for detailed asteroseismic investigation.

The asteroseismic modelling of period spacing patterns from gravito-inertial modes in stars with a convective core is a high-dimensional problem. We utilise the measured period spacing pattern of prograde dipole gravity modes (acquiring $\Pi_0$), in combination with the effective temperature ($T_{\rm eff}$) and surface gravity ($\log g$) derived from spectroscopy, to estimate the fundamental stellar parameters and core properties of 37 $\gamma~$Doradus ($\gamma~$Dor) stars whose rotation frequency has been derived from $\textit{Kepler}$ photometry. We make use of two 6D grids of stellar models, one with step core overshooting and one with exponential core overshooting, to evaluate correlations between the three observables $\Pi_0$, $T_{\rm eff}$, and $\log g$ and the mass, age, core overshooting, metallicity, initial hydrogen mass fraction and envelope mixing. We provide multivariate linear model recipes relating the stellar parameters to be estimated to the three observables ($\Pi_0$, $T_{\rm eff}$, $\log g$). We estimate the (core) mass, age, core overshooting and metallicity of $\gamma~$Dor stars from an ensemble analysis and achieve relative uncertainties of $\sim\!10$ per cent for the parameters. The asteroseismic age determination allows us to conclude that efficient angular momentum transport occurs already early on during the main sequence. We find that the nine stars with observed Rossby modes occur across almost the entire main-sequence phase, except close to core-hydrogen exhaustion. Future improvements of our work will come from the inclusion of more types of detected modes per star, larger samples, and modelling of individual mode frequencies.

Space asteroseismology reveals that stellar structure and evolution models of intermediate- and high-mass stars are in need of improvement in terms of angular momentum and chemical element transport. We aim to probe the interior structure of a hot massive star in the core-hydrogen burning phase of its evolution. We analyse CoRoT space photometry, Gaia DR2 space astrometry, and high-resolution high signal-to-noise HERMES and HARPS time-series spectroscopy of the slowly rotating B2V star HD 170580. From the time-series spectroscopy we derive $vsini=4\pm 2\,$km\,s$^{-1}$, where the uncertainty results from the complex pulsational line-profile variability. We detect 42 frequencies with amplitude above 5$\sigma$. Among these we identify 5 rotationally split triplets and 1 quintuplet. Asteroseismic modelling based on CoRoT, Gaia DR2 and spectroscopic data leads to a star of 8M$_\odot$ near core-hydrogen exhaustion and an extended overshoot zone. The detected low-order pressure-mode frequencies cannot be fit within the uncertainties of the CoRoT data by models without atomic diffusion. Irrespective of this limitation, the low-order gravity modes reveal HD 170580 to be a slow rotator with an average rotation period between 73 and 98 d and a hint of small differential rotation. Future Gaia DR3 data taking into account the multiplicity of the star, along with long-term TESS photometry would allow to put better observational constraints on the asteroseismic models of this blue evolved massive star. Improved modelling with atomic diffusion, including radiative levitation, is needed to achieve compliance with the low helium surface abundance of the star. This poses immense computational challenges but is required to derive the interior rotation and mixing profiles of this star.

Uncertainties in stellar structure and evolution theory are largest for stars undergoing core convection on the main sequence. A powerful way to calibrate the free parameters used in the theory of stellar interiors is asteroseismology, which provides direct measurements of angular momentum and element transport. We report the detection and classification of new variable O and B stars using high-precision short-cadence (2-min) photometric observations assembled by the Transiting Exoplanet Survey Satellite (TESS). In our sample of 154 O and B stars, we detect a high percentage (90%) of variability. Among these we find 23 multiperiodic pulsators, 6 eclipsing binaries, 21 rotational variables, and 25 stars with stochastic low-frequency variability. Several additional variables overlap between these categories. Our study of O and B stars not only demonstrates the high data quality achieved by TESS for optimal studies of the variability of the most massive stars in the Universe, but also represents the first step towards the selection and composition of a large sample of O and B pulsators with high potential for joint asteroseismic and spectroscopic modeling of their interior structure with unprecedented precision.

Early-type stars are predicted to excite an entire spectrum of internal gravity waves (IGWs) at the interface of their convective cores and radiative envelopes. Numerical simulations of IGWs predict stochastic low-frequency variability in photometric observations, yet the detection of IGWs in early-type stars has been limited by a dearth of high-quality photometric time series. We present observational evidence of stochastic low-frequency variability in the CoRoT photometry of a sample of O, B, A and F stars. The presence of this stochastic low-frequency variability in stars across the upper main-sequence cannot be universally explained as granulation or stellar winds, but its morphology is found to be consistent with predictions from IGW simulations.

Context. Main sequence stars with a convective core are predicted to stochastically excite Internal Gravity Waves (IGWs), which effectively transport angular momentum throughout the stellar interior and explain the observed near-uniform interior rotation rates of intermediate-mass stars. However, there are few detections of IGWs, and fewer still made using photometry, with more detections needed to constrain numerical simulations. Aims. We aim to formalise the detection and characterisation of IGWs in photometric observations of stars born with convective cores (M > 1.5 M$_{\odot}$) and parameterise the low-frequency power excess caused by IGWs. Methods. Using the most recent CoRoT light curves for a sample of O, B, A and F stars, we parameterise the morphology of the flux contribution of IGWs in Fourier space using an MCMC numerical scheme within a Bayesian framework. We compare this to predictions from IGW numerical simulations and investigate how the observed morphology changes as a function of stellar parameters. Results. We demonstrate that a common morphology for the low-frequency power excess is observed in early-type stars observed by CoRoT. Our study shows that a background frequency-dependent source of astrophysical signal is common, which we interpret as IGWs. We provide constraints on the amplitudes of IGWs and the shape of their detected frequency spectrum across a range of mass, which is the first ensemble study of stochastic variability in such a diverse sample of stars. Conclusions. The evidence of a low-frequency power excess across a wide mass range supports the interpretation of IGWs in photometry of O, B, A and F stars. We also discuss the prospects of observing hundreds of massive stars with the Transiting Exoplanet Survey Satellite (TESS) in the near future.

The simultaneous presence of variability due to both pulsations and binarity is no rare phenomenon. Unfortunately, the complexities of dealing with even one of these sources of variability individually means that the other signal is often treated as a nuisance and discarded. However, both types of variability offer means to probe fundamental stellar properties in robust ways through asteroseismic and binary modelling. We present an efficient methodology that includes both binary and asteroseismic information to estimate fundamental stellar properties based on a grid-based modelling approach. We report parameters for three gravity mode pulsating {\it Kepler} binaries , such as mass, radius, age, as well the mass of the convective core and location of the overshoot region. We discuss the presence of parameter degeneracies and the way our methodology deals with them. We provide asteroseismically calibrated isochrone-clouds to the community; these are a generalisation of isochrones when allowing for different values of the core overshooting in the two components of the binary.

Context. While rotation has a major impact on stellar structure and evolution, its effects are not well understood. Thanks to high- quality and long timebase photometric observations obtained with recent space missions, we are now able to study stellar rotation more precisely. Aims. We aim to constrain radial differential rotation profiles in gamma Doradus (gamma Dor) stars, and to develop new theoretical seismic diagnosis for such stars with rapid and potentially non-uniform rotation. Methods. We derive a new asymptotic description which accounts for the impact of weak differential near-core rotation on gravity- mode period spacings. The theoretical predictions are illustrated from pulsation computations with the code GYRE and compared with observations of gamma Dor stars. When possible, we also derive the surface rotation rates in these stars by detecting and analysing signatures of rotational modulation, and compute the core-to-surface rotation ratios. Results. Stellar rotation has to be strongly differential before its effects on period spacing patterns can be detected, unless multiple period spacing patterns can be compared. Six stars in our sample exhibit a single unexplained period spacing pattern of retrograde modes. We hypothesise that these are Yanai modes. Finally, we find signatures of rotational spot modulation in the photometric data of eight targets. Conclusions. If only one period spacing pattern is detected and analysed for a star, it is difficult to detect differential rotation. A rigidly rotating model will often provide the best solution. Differential rotation can only be detected when multiple period spacing patterns have been found for a single star or its surface rotation rate is known as well. This is the case for eight stars in our sample, revealing surface-to-core rotation ratios between 0.95 and 1.05.

We propose a methodological framework to perform forward asteroseismic modeling of stars with a convective core, based on gravity-mode oscillations. These probe the near-core region in the deep stellar interior. The modeling relies on a set of observed high-precision oscillation frequencies of low-degree coherent gravity modes with long lifetimes and their observational uncertainties. Identification of the mode degree and azimuthal order is assumed to be achieved from rotational splitting and/or from period spacing patterns. This paper has two major outcomes. The first is a comprehensive list and discussion of the major uncertainties of theoretically predicted gravity-mode oscillation frequencies based on linear pulsation theory, caused by fixing choices of the input physics for evolutionary models. Guided by a hierarchy among these uncertainties of theoretical frequencies, we subsequently provide a global methodological scheme to achieve forward asteroseismic modeling. We properly take into account correlations amongst the free parameters included in stellar models. Aside from the stellar mass, metalicity and age, the major parameters to be estimated are the near-core rotation rate, the amount of convective core overshooting, and the level of chemical mixing in the radiative zones. This modeling scheme allows for maximum likelihood estimation of the stellar parameters for fixed input physics of the equilibrium models, followed by stellar model selection considering various choices of the input physics. Our approach uses the Mahalanobis distance instead of the often used $\chi^2$ statistic and includes heteroscedasticity. It provides estimation of the unknown variance of the theoretically predicted oscillation frequencies.

The large-scale magnetic fields detected at the surface of about 10% of hot stars extend into the stellar interior, where they may alter the structure. Deep inner regions of stars are only observable using asteroseismology. Here, we investigated the pulsating magnetic B3.5V star HD43317, inferred its interior properties and assessed whether the dipolar magnetic field with a surface strength of $B_p = 1312 \pm 332$G caused different properties compared to those of non-magnetic stars. We analysed the latest version of the star's 150d CoRoT light curve and extracted 35 significant frequencies, 28 of which were determined to be independent and not related to the known surface rotation period of $P_{\rm rot} = 0.897673$d. We performed forward seismic modelling based on non-magnetic, non-rotating 1D MESA models and the adiabatic module of the pulsation code GYRE, utilizing a grid-based approach. Our aim was to estimate the stellar mass, age, and convective core overshooting. The GYRE calculations were done for uniform rotation with $P_{\rm rot}$. This modelling was able to explain 16 of the 28 frequencies as gravity modes belonging to retrograde modes with $(\ell, m) = (1, -1)$ and $(2, -1)$ period spacing patterns and one distinct prograde $(2,2)$ mode. The modelling resulted in a stellar mass $M_{\star} = 5.8^{+0.1}_{-0.2}$$\mathrm{M_{\odot}}$, a central hydrogen mass fraction $X_c = 0.54^{+0.01}_{-0.02}$, and exponential convective core overshooting parameter $f_{\rm ov} = 0.004^{+0.014}_{-0.002}$. The low value for $f_{\rm ov}$ is compatible with the suppression of near-core mixing due to a magnetic field but the uncertainties are too large to pinpoint such suppression as the sole physical interpretation. $[...]$

Early-type magnetic stars are rarely found in close binary systems. No such objects were known in eclipsing binaries prior to this study. Here we investigated the eclipsing, spectroscopic double-lined binary HD66051, which exhibits out-of-eclipse photometric variations suggestive of surface brightness inhomogeneities typical of early-type magnetic stars. Using a new set of high-resolution spectropolarimetric observations, we discovered a weak magnetic field on the primary and found intrinsic, element-dependent variability in its spectral lines. The magnetic field structure of the primary is dominated by a nearly axisymmetric dipolar component with a polar field strength $B_{\rm d}\approx600$ G and an inclination with respect to the rotation axis of $\beta_{\rm d}=13^{\rm o}$. A weaker quadrupolar component is also likely to be present. We combined the radial velocity measurements derived from our spectra with archival optical photometry to determine fundamental masses (3.16 and 1.75 $M_\odot$) and radii (2.78 and 1.39 $R_\odot$) with a 1-3% precision. We also obtained a refined estimate of the effective temperatures (13000 and 9000 K) and studied chemical abundances for both components with the help of disentangled spectra. We demonstrate that the primary component of HD66051 is a typical late-B magnetic chemically peculiar star with a non-uniform surface chemical abundance distribution. It is not an HgMn-type star as suggested by recent studies. The secondary is a metallic-line star showing neither a strong, global magnetic field nor intrinsic spectral variability. Fundamental parameters provided by our work for this interesting system open unique possibilities for probing interior structure, studying atomic diffusion, and constraining binary star evolution.

We present an 80-d long uninterrupted high-cadence K2 light curve of the B1Iab supergiant rho Leo (HD 91316), deduced with the method of halo photometry. This light curve reveals a dominant frequency of $f_{\rmrot}=0.0373$d$^{-1}$ and its harmonics. This dominant frequency corresponds with a rotation period of 26.8d and is subject to amplitude and phase modulation. The K2 photometry additionally reveals multiperiodic low-frequency variability ($<1.5 $d$^{-1}$) and is in full agreement with low-cadence high-resolution spectroscopy assembled during 1800 days. The spectroscopy reveals rotational modulation by a dynamic aspherical wind with an amplitude of about 20km s$^{-1}$ in the H$\alpha$ line, as well as photospheric velocity variations of a few km s$^{-1}$ at frequencies in the range 0.2 to 0.6 d$^{-1}$ in the SiIII 4567\AA\ line. Given the large macroturbulence needed to explain the spectral line broadening of the star, we interpret the detected photospheric velocity as due to travelling super-inertial low-degree large-scale gravity waves with dominant tangential amplitudes and discuss why $\rho$~Leo is an excellent target to study how the observed photospheric variability propagates into the wind.

Binaries in double-lined spectroscopic systems provide a homogeneous set of stars. Differences of parameters, such as age or initial conditions, which otherwise would have strong impact on the stellar evolution, can be neglected. The observed differences are determined by the difference in stellar mass between the two components. The mass ratio can be determined with much higher accuracy than the actual stellar mass. In this work, we aim to study the eccentric binary system KIC9163796, whose two components are very close in mass and both are low-luminosity red-giant stars from four years of Kepler space photometry and high-resolution spectroscopy with Hermes. Mass and radius of the primary were determined through asteroseismology to be 1.39+/-0.06 Mo and 5.35+/-0.09 Ro, resp. From spectral disentangling the mass ratio was found to be 1.015+/-0.005 and that the secondary is ~600K hotter than the primary. Evolutionary models place both components, in the early and advanced stage of the first dredge-up event on the red-giant branch. From theoretical models of the primary, we derived the internal rotational gradient. From a grid of models, the measured difference in lithium abundance is compared with theoretical predictions. The surface rotation of the primary is determined from the Kepler light curve and resembles the orbital period within 10 days. The radial rotational gradient between the surface and core is found to be 6.9+2.0/-1.0. The agreement between the surface rotation with the seismic result indicates that the full convective envelope is rotating quasi-rigidly. The models of the lithium abundance are compatible with a rigid rotation in the radiative zone during the main sequence. Because of the many constraints offered by oscillating stars in binary systems, such objects are important test beds of stellar evolution.

We proposed that the use of an approximate "jump condition" at the solar transition region permits fast and accurate numerical solutions of the one dimensional hydrodynamic equations when the corona undergoes impulsive heating. In particular, it eliminates the need for the very short timesteps imposed by a highly resolved numerical grid. This paper presents further examples of the applicability of the method for cases of non-uniform heating, in particular, nanoflare trains (uniform in space but non-uniform in time) and spatially localised impulsive heating, including at the loop apex and base of the transition region. In all cases the overall behaviour of the coronal density and temperature shows good agreement with a fully resolved one dimensional model and is significantly better than the equivalent results from a 1D code run without using the jump condition but with the same coarse grid. A detailed assessment of the errors introduced by the jump condition is presented showing that the causes of discrepancy with the fully resolved code are (i) the neglect of the terms corresponding to the rate of change of total energy in the unresolved atmsophere, (ii) mass motions at the base of the transition region and (iii) for some cases with footpoint heating, an over-estimation of the radiative losses in the transition region.

We present a new computational approach that addresses the difficulty of obtaining the correct interaction between the solar corona and the transition region in response to rapid heating events. In the coupled corona, transition region and chromosphere system, an enhanced downward conductive flux results in an upflow (chromospheric evaporation). However, obtaining the correct upflow generally requires high spatial resolution in order to resolve the transition region. With an unresolved transition region, artificially low coronal densities are obtained because the downward heat flux jumps across the unresolved region to the chromosphere, underestimating the upflows. Here, we treat the lower transition region as a discontinuity that responds to changing coronal conditions through the imposition of a jump condition that is derived from an integrated form of energy conservation. To illustrate and benchmark this approach against a fully resolved one-dimensional model, we present field-aligned simulations of coronal loops in response to a range of impulsive (spatially uniform) heating events. We show that our approach leads to a significant improvement in the coronal density evolution than just when using coarse spatial resolutions insufficient to resolve the lower transition region. Our approach compensates for the jumping of the heat flux by imposing a velocity correction that ensures that the energy from the heat flux goes into driving the transition region dynamics, rather than being lost through radiation. Hence, it is possible to obtain improved coronal densities. The advantages of using this approach in both one-dimensional hydrodynamic and three-dimensional magnetohydrodynamic simulations are discussed.

We present the analysis of 29.77 days of K2 space photometry of the well-detached massive 4.6 d O+B binary HD 165246 (V=7.8) obtained during Campaign 9b. This analysis reveals intrinsic variability in the residual lightcurve after subtraction of the binary model, in the frequency range [0,10] $d^{-1}$. This makes HD 165246 only the second O+B eclipsing binary with asteroseismic potential. While some of the frequencies are connected with the rotation of the primary, others are interpreted as due to oscillations with periodicities of order days. The frequency resolution of the current dataset does not allow to distinguish between frequencies due to standing coherent oscillation modes or travelling waves. Further time-resolved high-precision spectroscopy covering several binary orbits will reveal whether HD 165246 is a Rosetta stone for synergistic binary and seismic modelling of an O-type star.

Stars similar to the Sun, known as solar analogues, provide an excellent opportunity to study the preceding and following evolutionary phases of our host star. The unprecedented quality of photometric data collected by the \Kepler NASA mission allows us to characterise solar-like stars through asteroseismology and study diagnostics of stellar evolution, such as variation of magnetic activity, rotation and the surface lithium abundance. In this project, presented in a series of papers by Salabert et al. (2016a,b) and Beck et al (2016a,b), we investigate the link between stellar activity, rotation, lithium abundance and oscillations in a group of 18 solar-analogue stars through space photometry, obtained with the NASA Kepler space telescope and from currently 50+ hours of ground-based, high-resolution spectroscopy with the Hermes instrument. In these proceedings, we first discuss the selection of the stars in the sample, observations and calibrations and then summarise the main results of the project. By investigating the chromospheric and photospheric activity of the solar analogues in this sample, it was shown that for a large fraction of these stars the measured activity levels are compatible to levels of the 11-year solar activity cycle 23. A clear correlation between the lithium abundance and surface rotation was found for rotation periods shorter than the solar value. Comparing the lithium abundance measured in the solar analogues to evolutionary models with the Toulouse-Geneva Evolutionary Code (TGEC), we found that the solar models calibrated to the Sun also correctly describe the set of solar/stellar analogs showing that they share the same internal mixing physics. Finally, the star KIC 3241581 and KIC 10644353 are discussed in more detail.

The unparalleled photometric data obtained by NASA's Kepler Space Telescope has led to an improved understanding of stellar structure and evolution - in particular for solar-like oscillators in this context. Binary stars are fascinating objects. Because they were formed together, binary systems provide a set of two stars with very well constrained parameters. Those can be used to study properties and physical processes, such as the stellar rotation, dynamics and rotational mixing of elements and allows us to learn from the differences we find between the two components. In this work, we discussed a detailed study of the binary system KIC9163796, discovered through Kepler photometry. The ground-based follow-up spectroscopy showed that this system is a double-lined spectroscopic binary, with a mass ratio close to unity. However, the fundamental parameters of the components of this system as well as their lithium abundances differ substantially. Kepler photometry of this system allows to perform a detailed seismic analysis as well as to derive the orbital period and the surface rotation rate of the primary component of the system. Indications of the seismic signature of the secondary are found. The differing parameters are best explained with both components located in the early and the late phase of the first dredge up at the bottom of the red-giant branch. Observed lithium abundances in both components are in good agreement with prediction of stellar models including rotational mixing. By combining observations and theory, a comprehensive picture of the system can be drawn.

The Kepler Mission has provided unprecedented, nearly continuous photometric data of $\sim$200,000 objects in the $\sim$105 deg$^{2}$ field of view from the beginning of science operations in May of 2009 until the loss of the second reaction wheel in May of 2013. The Kepler Eclipsing Binary Catalog contains information including but not limited to ephemerides, stellar parameters and analytical approximation fits for every known eclipsing binary system in the Kepler Field of View. Using Target Pixel level data collected from Kepler in conjunction with the Kepler Eclipsing Binary Catalog, we identify false positives among eclipsing binaries, i.e. targets that are not eclipsing binaries themselves, but are instead contaminated by eclipsing binary sources nearby on the sky and show eclipsing binary signatures in their light curves. We present methods for identifying these false positives and for extracting new light curves for the true source of the observed binary signal. For each source, we extract three separate light curves for each quarter of available data by optimizing the signal-to-noise ratio, the relative percent eclipse depth and the flux eclipse depth. We present 289 new eclipsing binaries in the Kepler Field of View that were not targets for observation, and these have been added to the Catalog. An online version of this Catalog with downloadable content and visualization tools is maintained at http://keplerEBs.villanova.edu.

The primary Kepler Mission provided nearly continuous monitoring of ~200,000 objects with unprecedented photometric precision. We present the final catalog of eclipsing binary systems within the 105 square degree Kepler field of view. This release incorporates the full extent of the data from the primary mission (Q0-Q17 Data Release). As a result, new systems have been added, additional false positives have been removed, ephemerides and principal parameters have been recomputed, classifications have been revised to rely on analytical models, and eclipse timing variations have been computed for each system. We identify several classes of systems including those that exhibit tertiary eclipse events, systems that show clear evidence of additional bodies, heartbeat systems, systems with changing eclipse depths, and systems exhibiting only one eclipse event over the duration of the mission. We have updated the period and galactic latitude distribution diagrams and included a catalog completeness evaluation. The total number of identified eclipsing and ellipsoidal binary systems in the Kepler field of view has increased to 2878, 1.3% of all observed Kepler targets. An online version of this catalog with downloadable content and visualization tools is maintained at http://keplerEBs.villanova.edu.

Experiments were performed with prototype antenna tiles for the Mileura Widefield Array--Low Frequency Demonstrator (MWA-LFD) to better understand the widefield, wideband properties of their design and to characterize the radio frequency interference (RFI) between 80 and 300 MHz at the site in Western Australia. Observations acquired during the six month deployment confirmed the predicted sensitivity of the antennas, sky-noise dominated system temperatures, and phase-coherent interferometric measurements. The radio spectrum is remarkably free of strong terrestrial signals, with the exception of two narrow frequency bands allocated to satellite downlinks and rare bursts due to ground-based transmissions being scattered from aircraft and meteor trails. Results indicate the potential of the MWA-LFD to make significant achievements in its three key science objectives: epoch of reionziation science, heliospheric science, and radio transient detection.