The investigation of pulsars between millimetre and optical wavelengths is challenging due to the faintness of the pulsar signals and the relative low sensitivity of the available facilities compared to 100-m class telescopes operating in the centimetre band. The Kinetic Inductance Detector (KID) technology offers large instantaneous bandwidths and a high sensitivity that can help to substantially increase the ability of existing observatories at short wavelengths to detect pulsars and transient emission. To investigate the feasibility of detecting pulsars with KIDs, we observed the anomalous X-ray pulsar XTE J1810-197 with the New IRAM KIDs Array-2 (NIKA2) camera installed at the IRAM 30-m Telescope in Spain. We detected the pulsations from the pulsar with NIKA2 at its two operating frequency bands, 150 and 260 GHz ($\lambda$=2.0 and 1.15 mm, respectively). This is the first time that a pulsar is detected with a receiver based on KID technology in the millimetre band. In addition, this is the first report of short millimetre emission from XTE J1810-197 after its reactivation in December 2018, and it is the first time that the source is detected at 260 GHz, which gives us new insights into the radio emission process of the star.

NIKA2 is a dual-band millimetric continuum camera of 2900 Kinetic Inductance Detectors (KID), operating at $150$ and $260\,\rm{GHz}$, installed at the IRAM 30-meter telescope. We present the performance assessment of NIKA2 after one year of observation using a dedicated point-source calibration method, referred to as the \emph{baseline} method. Using a large data set acquired between January 2017 and February 2018 that span the whole range of observing elevations and atmospheric conditions encountered at the IRAM 30-m telescope, we test the stability of the performance parameters. We report an instantaneous field of view (FOV) of 6.5' in diameter, filled with an average fraction of $84\%$ and $90\%$ of valid detectors at $150$ and $260\,\rm{GHz}$, respectively. The beam pattern is characterized by a FWHM of $17.6'' \pm 0.1''$ and $11.1''\pm 0.2''$, and a beam efficiency of $77\% \pm 2\%$ and $55\% \pm 3\%$ at $150$ and $260\,\rm{GHz}$, respectively. The rms calibration uncertainties are about $3\%$ at $150\,\rm{GHz}$ and $6\%$ at $260\,\rm{GHz}$. The absolute calibration uncertainties are of $5\%$ and the systematic calibration uncertainties evaluated at the IRAM 30-m reference Winter observing conditions are below $1\%$ in both channels. The noise equivalent flux density (NEFD) at $150$ and $260\,\rm{GHz}$ are of $9 \pm 1\, \rm{mJy}\cdot s^{1/2}$ and $30 \pm 3\, \rm{mJy}\cdot s^{1/2}$. This state-of-the-art performance confers NIKA2 with mapping speeds of $1388 \pm 174$ and $111 \pm 11 \,\rm{arcmin}^2\cdot \rm{mJy}^{-2}\cdot \rm{h}^{-1}$ at $150$ and $260\,\rm{GHz}$. With these unique capabilities of fast dual-band mapping at high (better that 18'') angular resolution, NIKA2 is providing an unprecedented view of the millimetre Universe.

The New IRAM KID Arrays 2 (NIKA2) consortium has just finished installing and commissioning a millimetre camera on the IRAM 30 m telescope. It is a dual-band camera operating with three frequency multiplexed kilo-pixels arrays of Lumped Element Kinetic Inductance Detectors (LEKID) cooled at 150 mK, designed to observe the intensity and polarisation of the sky at 260 and 150 GHz (1.15 and 2 mm). NIKA2 is today an IRAM resident instrument for millimetre astronomy, such as Intra Cluster Medium from intermediate to distant clusters and so for the follow-up of Planck satellite detected clusters, high redshift sources and quasars, early stages of star formation and nearby galaxies emission. We present an overview of the instrument performance as it has been evaluated at the end of the commissioning phase.

Barnard 207 (B207, LDN 1489, LBN 777), also known as the Vulture Head nebula, is a cometary globule in the Taurus-Auriga-Perseus molecular cloud region. B207 is known to host a Class I protostar, IRAS 04016+2610, located at a projected distance of ~8,400 au from the dense core centre. Using imaging and photometry over a wide wavelength range, from UV to sub-mm, we study the physical properties of B207 and the dust grains contained within. The core density, temperature, and mass are typical of other globules found in the Milky Way interstellar medium (ISM). The increase in the dust albedo with increasing optical wavelengths, along with the detection of coreshine in the near infrared, indicates the presence of larger dust grains in B207. The measured optical, near-, mid- and far-infrared intensities are in agreement with the CMM+AMM and CMM+AMMI dust grain type of The Heterogeneous dust Evolution Model for Interstellar Solids (THEMIS), suggesting mantle formation on the dust grains throughout the globule. We investigate the possibility of turbulence being responsible for diffusing dust grains from the central core to external outer layers of B207. However, in situ formation of large dust grains cannot be excluded.