The discovery of high-energy astrophysical neutrinos by IceCube has opened a new window to the Universe. However, the origin of these neutrinos is still a mystery, and some of them could be a result of dark matter interactions such as decay. Next generation gigaton water-Cherenkov neutrino telescope, KM3NeT, is expected to offer significantly improved energy resolution in the cascade channel, and advantageous viewing condition to the Galactic Center; both important for searches of dark matter decay signals. We study the sensitivity of KM3NeT on dark matter decays by performing a mock likelihood analysis for both cascade and track type events, taking into account both angular and energy information. We find that, combining both channels, KM3NeT is expected to produce world leading limits on dark matter decay lifetime in the PeV mass range, and could test some of the dark matter hints in the current IceCube data.

We present multi-wavelength measurements of the thermal, chemical, and cloud contrasts associated with the visibly dark formations (also known as 5-$\mu$m hot spots) and intervening bright plumes on the boundary between Jupiter's Equatorial Zone (EZ) and North Equatorial Belt (NEB). Observations made by the TEXES 5-20 $\mu$m spectrometer at the Gemini North Telescope in March 2017 reveal the upper-tropospheric properties of 12 hot spots, which are directly compared to measurements by Juno using the Microwave Radiometer (MWR), JIRAM at 5 $\mu$m, and JunoCam visible images. MWR and thermal-infrared spectroscopic results are consistent near 0.7 bar. Mid-infrared-derived aerosol opacity is consistent with that inferred from visible-albedo and 5-$\mu$m opacity maps. Aerosol contrasts, the defining characteristics of the cloudy plumes and aerosol-depleted hot spots, are not a good proxy for microwave brightness. The hot spots are neither uniformly warmer nor ammonia-depleted compared to their surroundings at $p<1$ bar. At 0.7 bar, the microwave brightness at the edges of hot spots is comparable to other features within the NEB. Conversely, hot spots are brighter at 1.5 bar, signifying either warm temperatures and/or depleted NH$_3$ at depth. Temperatures and ammonia are spatially variable within the hot spots, so the precise location of the observations matters to their interpretation. Reflective plumes sometimes have enhanced NH$_3$, cold temperatures, and elevated aerosol opacity, but each plume appears different. Neither plumes nor hot spots had microwave signatures in channels sensing $p>10$ bars, suggesting that the hot-spot/plume wave is a relatively shallow feature.

Realistic synthetic observations of theoretical source models are essential for our understanding of real observational data. In using synthetic data, one can verify the extent to which source parameters can be recovered and evaluate how various data corruption effects can be calibrated. These studies are important when proposing observations of new sources, in the characterization of the capabilities of new or upgraded instruments, and when verifying model-based theoretical predictions in a comparison with observational data. We present the SYnthetic Measurement creator for long Baseline Arrays (SYMBA), a novel synthetic data generation pipeline for Very Long Baseline Interferometry (VLBI) observations. SYMBA takes into account several realistic atmospheric, instrumental, and calibration effects. We used SYMBA to create synthetic observations for the Event Horizon Telescope (EHT), a mm VLBI array, which has recently captured the first image of a black hole shadow. After testing SYMBA with simple source and corruption models, we study the importance of including all corruption and calibration effects. Based on two example general relativistic magnetohydrodynamics (GRMHD) model images of M87, we performed case studies to assess the attainable image quality with the current and future EHT array for different weather conditions. The results show that the effects of atmospheric and instrumental corruptions on the measured visibilities are significant. Despite these effects, we demonstrate how the overall structure of the input models can be recovered robustly after performing calibration steps. With the planned addition of new stations to the EHT array, images could be reconstructed with higher angular resolution and dynamic range. In our case study, these improvements allowed for a distinction between a thermal and a non-thermal GRMHD model based on salient features in reconstructed images.

High-resolution imaging of supermassive black holes is now possible, with new applications to testing general relativity and horizon-scale accretion and relativistic jet formation processes. Over the coming decade, the EHT will propose to add new strategically placed VLBI elements operating at 1.3mm and 0.87mm wavelength. In parallel, development of next-generation backend instrumentation, coupled with high throughput correlation architectures, will boost sensitivity, allowing the new stations to be of modest collecting area while still improving imaging fidelity and angular resolution. The goal of these efforts is to move from imaging static horizon scale structure to dynamic reconstructions that capture the processes of accretion and jet launching in near real time.

In April 2019, the Event Horizon Telescope (EHT) collaboration revealed the first image of the candidate super-massive black hole (SMBH) at the centre of the giant elliptical galaxy Messier 87 (M87). This event-horizon-scale image shows a ring of glowing plasma with a dark patch at the centre, which is interpreted as the shadow of the black hole. This breakthrough result, which represents a powerful confirmation of Einstein's theory of gravity, or general relativity, was made possible by assembling a global network of radio telescopes operating at millimetre wavelengths that for the first time included the Atacama Large Millimeter/ submillimeter Array (ALMA). The addition of ALMA as an anchor station has enabled a giant leap forward by increasing the sensitivity limits of the EHT by an order of magnitude, effectively turning it into an imaging array. The published image demonstrates that it is now possible to directly study the event horizon shadows of SMBHs via electromagnetic radiation, thereby transforming this elusive frontier from a mathematical concept into an astrophysical reality. The expansion of the array over the next few years will include new stations on different continents - and eventually satellites in space. This will provide progressively sharper and higher-fidelity images of SMBH candidates, and potentially even movies of the hot plasma orbiting around SMBHs. These improvements will shed light on the processes of black hole accretion and jet formation on event-horizon scales, thereby enabling more precise tests of general relativity in the truly strong field regime.

We present the design and implementation of an automated data calibration and reduction pipeline for very-long-baseline interferometric (VLBI) observations taken at millimeter wavelengths. These short radio-wavelengths provide the best imaging resolution available from ground-based VLBI networks such as the Event Horizon Telescope (EHT) and the Global Millimeter VLBI Array (GMVA), but require specialized processing due to the strong effects from atmospheric opacity and turbulence as well as the heterogeneous nature of existing global arrays. The pipeline builds upon a calibration suite (HOPS) originally designed for precision geodetic VLBI. To support the reduction of data for astronomical observations, we have developed an additional framework for global phase and amplitude calibration which provides output in a standard data format for astronomical imaging and analysis. We test the pipeline on observations taken at 3.5 mm (86 GHz) by the GMVA joined by the phased Atacama Large Millimeter/submillimeter Array in April 2017, and demonstrate the benefits from the specialized processing of high frequency VLBI data with respect to classical analysis techniques.

The galaxy M 87 harbors a kiloparsec-scale relativistic jet, whose origin coincides with a supermassive black hole. Observational mm-VLBI campaigns are capable of resolving the jet-launching region at the scale of the event horizon. In order to provide a context for interpreting these observations, realistic general-relativistic magnetohydrodynamical (GRMHD) models of the accretion flow are constructed. The characteristics of the observed spectral-energy distribution (SED) depend on the shape of the electrons' energy-distribution function (eDF). The dependency on the eDF is omitted in the modeling of the first Event Horizon Telescope results. In this work, we aim to model the M 87 SED from radio up to NIR/optical frequencies using a thermal-relativistic Maxwell- J\"uttner distribution, as well as a relativistic $\kappa$-distribution function. The electrons are injected based on sub-grid, particle-in-cell parametrizations for sub-relativistic reconnection. A GRMHD simulation in Cartesian-Kerr-Schild coordinates, using eight levels of adaptive mesh refinement (AMR), forms the basis of our model. To obtain spectra and images, the GRMHD data is post-processed with the ray-tracing code RAPTOR, which is capable of ray tracing through AMR GRMHD simulation data. We obtain radio spectra in both the thermal-jet and $\kappa$-jet models consistent with radio observations. Additionally, the $\kappa$-jet models also recover the NIR/optical emission. The models recover the observed source sizes and core shifts and obtain a jet power of $\approx 10^{43}$ ergs/s. In the $\kappa$-jet models, both the accretion rates and jet powers are approximately two times lower than the thermal-jet model. The frequency cut-off observed at $\nu \approx 10^{15}$ Hz is recovered when the accelerator size is $10^6$ - $10^8$ cm, this could potentially point to an upper limit for plasmoid sizes in the jet of M 87.

(Abridged) The CASA software suite, can now reduce very long baseline interferometry (VLBI) data with the recent addition of a fringe fitter. Here, we present the Radboud PIpeline for the Calibration of high Angular Resolution Data (rPICARD), which is an open-source VLBI calibration and imaging pipeline built on top of the CASA framework. The pipeline is capable of reducing data from different VLBI arrays. It can be run non-interactively after only a few non-default input parameters are set and delivers high-quality calibrated data. CPU scalability based on a message-passing interface (MPI) implementation ensures that large bandwidth data from future arrays can be processed within reasonable computing times. Phase calibration is done with a Schwab-Cotton fringe fit algorithm. For the calibration of residual atmospheric effects, optimal solution intervals are determined based on the signal-to-noise ratio (S/N) of the data for each scan. Different solution intervals can be set for different antennas in the same scan to increase the number of detections in the low S/N regime. These novel techniques allow rPICARD to calibrate data from different arrays, including high-frequency and low-sensitivity arrays. The amplitude calibration is based on standard telescope metadata, and a robust algorithm can solve for atmospheric opacity attenuation in the high-frequency regime. Standard CASA tasks are used for CLEAN imaging and self-calibration. In this work we demonstrate the capabilities of rPICARD by calibrating and imaging 7 mm VLBA data of the central radio source in the M87 galaxy. The reconstructed jet image reveals a complex collimation profile and edge-brightened structure. A potential counter-jet is detected that has 10 % of the brightness of the approaching jet. This constrains jet speeds close to the radio core to about half the speed of light for small inclination angles.

Currently, HOPS and AIPS are the primary choices for the time-consuming process of (millimeter) Very Long Baseline Interferometry (VLBI) data calibration. However, for a full end-to-end pipeline, they either lack the ability to perform easily scriptable incremental calibration or do not provide full control over the workflow with the ability to manipulate and edit calibration solutions directly. The Common Astronomy Software Application (CASA) offers all these abilities, together with a secure development future and an intuitive Python interface, which is very attractive for young radio astronomers. Inspired by the recent addition of a global fringe-fitter, the capability to convert FITS-IDI files to measurement sets, and amplitude calibration routines based on ANTAB metadata, we have developed the the CASA-based Radboud PIpeline for the Calibration of high Angular Resolution Data (rPICARD). The pipeline will be able to handle data from multiple arrays: EHT, GMVA, VLBA and the EVN in the first release. Polarization and phase-referencing calibration are supported and a spectral line mode will be added in the future. The large bandwidths of future radio observatories ask for a scalable reduction software. Within CASA, a message passing interface (MPI) implementation is used for parallelization, reducing the total time needed for processing. The most significant gain is obtained for the time-consuming fringe-fitting task where each scan be processed in parallel.

In recent years new functionality for VLBI data processing has been added to the CASA package. This paper presents the new CASA tasks 'fringefit' and 'accor', which are closely matched to their AIPS counterparts FRING and ACCOR. Several CASA tasks received upgrades to handle VLBI specific metadata. With the current CASA release VLBI data processing is possible, and functionality will be expanded in the upcoming release. Longer term developments include fringe fitting of broad, non-continuous frequency bands and dispersive delays, which will ensure that the number of use cases for VLBI calibration will increase in future CASA releases.

In this paper we present the Low Frequency Instrument (LFI), designed and developed as part of the Planck space mission, the ESA program dedicated to precision imaging of the cosmic microwave background (CMB). Planck-LFI will observe the full sky in intensity and polarisation in three frequency bands centred at 30, 44 and 70 GHz, while higher frequencies (100-850 GHz) will be covered by the HFI instrument. The LFI is an array of microwave radiometers based on state-of-the-art Indium Phosphide cryogenic HEMT amplifiers implemented in a differential system using blackbody loads as reference signals. The front-end is cooled to 20K for optimal sensitivity and the reference loads are cooled to 4K to minimise low frequency noise. We provide an overview of the LFI, discuss the leading scientific requirements and describe the design solutions adopted for the various hardware subsystems. The main drivers of the radiometric, optical and thermal design are discussed, including the stringent requirements on sensitivity, stability, and rejection of systematic effects. Further details on the key instrument units and the results of ground calibration are provided in a set of companion papers.

This paper provides an overview of the Low Frequency Instrument (LFI) programme within the ESA Planck mission. The LFI instrument has been developed to produce high precision maps of the microwave sky at frequencies in the range 27-77 GHz, below the peak of the cosmic microwave background (CMB) radiation spectrum. The scientific goals are described, ranging from fundamental cosmology to Galactic and extragalactic astrophysics. The instrument design and development are outlined, together with the model philosophy and testing strategy. The instrument is presented in the context of the Planck mission. The LFI approach to ground and inflight calibration is described. We also describe the LFI ground segment. We present the results of a number of tests demonstrating the capability of the LFI data processing centre (DPC) to properly reduce and analyse LFI flight data, from telemetry information to calibrated and cleaned time ordered data, sky maps at each frequency (in temperature and polarization), component emission maps (CMB and diffuse foregrounds), catalogs for various classes of sources (the Early Release Compact Source Catalogue and the Final Compact Source Catalogue). The organization of the LFI consortium is briefly presented as well as the role of the core team in data analysis and scientific exploitation. All tests carried out on the LFI flight model demonstrate the excellent performance of the instrument and its various subunits. The data analysis pipeline has been tested and its main steps verified. In the first three months after launch, the commissioning, calibration, performance, and verification phases will be completed, after which Planck will begin its operational life, in which LFI will have an integral part.

Fundamental information about the Universe is encoded in anisotropies of the Cosmic Microwave Background (CMB) radiation. To make full use of this information, an experiment must image the entire sky with the angular resolution, sensitivity, and spectral coverage necessary to reach the limits set by cosmic variance on angular scales >~10'. Recent progress in detector technology allows this to be achieved by a properly designed space mission that fits well within the scope of NASA's Medium-class Explorer program. An essential component of the mission design is an observing strategy that minimizes systematic effects due to instrumental offset drifts. The detector advances make possible a `spin chopping' approach that has significant technical and scientific advantages over the strategy used by COBE, which reconstructed an image of the sky via inversion of a large matrix of differential measurements. The advantages include increased angular resolution, increased sensitivity, and simplicity of instrumentation and spacecraft operations. For the parameters typical of experiments like the Primordial Structures Investigation (PSI) and the Far InfraRed Explorer (FIRE), we show that the spin-chopping strategy produces images of the sky and power spectra of CMB anisotropies that contain no significant systematic artifacts.