The Cisco router in Low Earth Orbit (CLEO) was launched into space as an experimental secondary payload onboard the UK Disaster Monitoring Constellation (UK-DMC) satellite in September 2003. The UK-DMC satellite is one of an increasing number of DMC satellites in orbit that rely on the Internet Protocol (IP) for command and control and for delivery of data from payloads. The DMC satellites, built by Surrey Satellite Technology Ltd (SSTL), have imaged the effects of Hurricane Katrina, the Indian Ocean Tsunami, and other events for disaster relief under the International Space and Major Disasters Charter. It was possible to integrate the Cisco mobile access router into the UK-DMC satellite as a result of the DMC satellites' adoption of existing commercial networking standards, using IP over Frame Relay over standard High-Level Data Link Control, or HDLC (ISO 13239) on standard serial interfaces. This approach came from work onboard SSTL's earlier UoSAT-12 satellite

The Saratoga transfer protocol was developed by Surrey Satellite Technology Ltd (SSTL) for its Disaster Monitoring Constellation (DMC) satellites. In over seven years of operation, Saratoga has provided efficient delivery of remote-sensing Earth observation imagery, across private wireless links, from these seven low-orbit satellites to ground stations, using the Internet Protocol (IP). Saratoga is designed to cope with high bandwidth-delay products, constrained acknowledgement channels, and high loss while streaming or delivering extremely large files. An implementation of this protocol has now been developed at the Australian Commonwealth Scientific and Industrial Research Organisation (CSIRO) for wider use and testing. This is intended to prototype delivery of data across dedicated astronomy radio telescope networks on the ground, where networked sensors in Very Long Baseline Interferometer (VLBI) instruments generate large amounts of data for processing and can send that data across private IP- and Ethernet-based links at very high rates. We describe this new Saratoga implementation, its features and focus on high throughput and link utilization, and lessons learned in developing this protocol for sensor-network applications.